From 9baf1f3b58c9c830789f9efc37615306a2b40fc7 Mon Sep 17 00:00:00 2001
From: tzafrir <tzafrir@5390a7c7-147a-4af0-8ec9-7488f05a26cb>
Date: Wed, 11 Jul 2007 10:14:31 +0000
Subject: * Enable zaptel-perl by default. * Clunky shell xpp init functions
 replaced with better perl utilities.

git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.2@2710 5390a7c7-147a-4af0-8ec9-7488f05a26cb
---
 zaptel.init | 70 +------------------------------------------------------------
 1 file changed, 1 insertion(+), 69 deletions(-)

(limited to 'zaptel.init')

diff --git a/zaptel.init b/zaptel.init
index a608d20..e067b4d 100644
--- a/zaptel.init
+++ b/zaptel.init
@@ -84,71 +84,6 @@ xpp_startup() {
 }
 
 
-# Wait for Astribank to initialize registers:
-wait_for_xpp() {
-	if [ ! -d /proc/xpp ]; then return; fi
-
-	# reading from waitfor_xpds only returns when the device
-	# has finished initilizing its regiters and is available.
-	cat /proc/xpp/XBUS-*/waitfor_xpds 2>/dev/null >/dev/null  || true
-}
-
-# Register to zaptel Astribank spans that were not autoomatically registered
-# (useful when you have more than one Astribank)
-zap_reg_xpp() {
-	if [ ! -d /proc/xpp ]; then return; fi
-	
-	# Get a list of connected Astribank devices, sorted by the name of 
-	# the USB connector. That order is rather arbitrary, but will not 
-	# change without changes to the cabling.
-	xbusses=`sort -k 2 /proc/xpp/xbuses | awk -F: '/STATUS=connected/ {print $1}'`
-
-	# get a list of XPDs that were not yet registered as zaptel spans.
-	# this will be the case if you set the parameter zap_autoreg=0 to
-	# the module xpp
-	# Append /dev/null to provide a valid file name in case of an empty pattern.
-	xbusses_pattern=`echo $xbusses| sed -e 's|XBUS-[0-9]*|/proc/xpp/&/XPD-*/zt_registration|g'`' /dev/null'
-	xpds_to_register=`grep -l 0 $xbusses_pattern 2>/dev/null` || true
-	for file in $xpds_to_register; do
-		echo 1 >$file
-	done
-}
-
-# If the system has an Astribank, select the right one as the sync source.
-# TODO: replace the sryptic awk code with 'xpp_sync auto' once it is in.
-fix_asterisbank_sync() {
-	# do nothing if module not present
-	if [ ! -d /proc/xpp ]; then return; fi
-	
-	#if ! grep -q '^HOST' /proc/xpp/sync 2>/dev/null; then return; fi
-
-	case "$XPP_SYNC" in
-	n*|N*) return;;
-	host|HOST) sync_value="HOST";;
-	[0-9]*)sync_value="$XPP_SYNC";;
-	*) 
-		# find the number of the first bus, and sync from it:
-		fxo_pat=`awk -F: '/STATUS=connected/{print $1}' /proc/xpp/xbuses | sed -e 's|.*|/proc/xpp/&/*/fxo_info|'`
-		# find the first FXO unit, and set it as the sync master
-		bus=`ls -1 $fxo_pat 2> /dev/null | head -n1 | cut -d- -f2 | cut -d/ -f1` 
-		
-		if [ "$bus" = '' ]; then
-			# no device with FXO found. Just get the first one
-			bus=`awk -F: '/STATUS=connected/{print $1}' /proc/xpp/xbuses | head -n 1 | cut -d- -f2`
-		fi
-
-		# do nothing if there is no bus:
-		case "$bus" in [0-9]*):;; *) return;; esac
-		sync_value="SYNC=$bus"
-		;;
-	esac
-	# the built-in echo of bash fails to print a proper error on failure
-	if ! /bin/echo "$sync_value" >/proc/xpp/sync
-	then 
-		echo >&2 "Updating XPP sync source failed (tried \"$sync_value\", XPP_SYNC='$XPP_SYNC')"
-	fi
-}
-
 hpec_start() {
 	# HPEC license found
 	if ! echo /var/lib/digium/licenses/HPEC-*.lic | grep -v '\*' | grep -q .; then
@@ -237,10 +172,7 @@ case "$1" in
 	sleep 3 # TODO: remove it
 	
 	# If you have zaptel-perl, the three below can be replaced with:
-	#xpp_startup
-	wait_for_xpp
-	zap_reg_xpp
-	fix_asterisbank_sync # can actually be run after ztcfg
+	xpp_startup
 	
 	if [ ! -e /proc/zaptel/1 ]; then
 		echo "No functioning zap hardware found in /proc/zaptel, loading ztdummy"
-- 
cgit v1.2.3