.TH "FPGA_LOAD" "8" "16 April 2006" "" ""

.SH NAME
ztcfg \- reads and loads zaptel.conf
.SH SYNOPSIS

.B fpga_load 
[\fB-g\fR|\fB-d\fR] [\fB-v\fR] \fB-D\fR/proc/bus/usb/\fIBUS/DEV\fR 

.B fpga_load 
[\fB-g\fR] [\fB-v\fR] \fB-D\fR/proc/bus/usb/\fIBUS/DEV\fR \fB-I \fIfirmware.hex\fR [\fB-b \fIdump.bin\fR]

.B fpga_load -h

.SH DESCRIPTION
.B fpga_load 
loads the FPGA firmware to the Xorcom Astribank device.
The syntax resembles that of fxload(8).

.SH OPTIONS
.B -d
.I dump.bin
.RS
Before writing firmware, bump the processed binary file to 
.I dump.bin\fR.
.RE

.B -d
.RS
Print Version number bytes from eeprom (to standard output). Implies -g.
.RE

.B -D 
.I DEVICE
.RS
Required. The device to read from/write to. This is normally 
/proc/bus/usb/\fIbus_num\fR/\fIdevice_num\fR , where \fIbus_num\fR and 
\fIdevice_num\fR are the first two numbers in the output of lsusb(8).
.RE

.B -g
.RS
Dump all eeprom data to standard error.
.RE

.B -I
.I fireware_file
.RS
The firmware file to write to the device.
.RE

.B -v
.RS
Be verobse.
.RE

.B -h
.RS
Displays usage message.
.RE

.SH SEE ALSO
fxload(8), lsusb(8)

.SH AUTHOR
This manual page was written by Tzafrir Cohen <tzafrir.cohen@xorcom.com> .
Permission is granted to copy, distribute and/or modify this document under
the terms of the GNU General Public License, Version 2 any 
later version published by the Free Software Foundation.

On Debian systems, the complete text of the GNU General Public
License can be found in /usr/share/common-licenses/GPL.