configs: Move sample config files into a subdirectory of configs

This moves all samples configs from configs/ to configs/samples. This allows
for additional sets of sample configuration files to be added in the future.

Review: https://reviewboard.asterisk.org/r/3804/


git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@418870 65c4cc65-6c06-0410-ace0-fbb531ad65f3

1 files changed, 0 insertions, 157 deletions

diff --git a/configs/manager.conf.sample b/configs/manager.conf.sample
deleted file mode 100644
index f31c6d397..000000000
--- a/configs/manager.conf.sample
+++ /dev/null
@@ -1,157 +0,0 @@
-;
-; AMI - The Asterisk Manager Interface
-;
-; Third party application call management support and PBX event supervision
-;
-; This configuration file is read every time someone logs in
-;
-; Use the "manager show commands" at the CLI to list available manager commands
-; and their authorization levels.
-;
-; "manager show command <command>" will show a help text.
-;
-; ---------------------------- SECURITY NOTE -------------------------------
-; Note that you should not enable the AMI on a public IP address. If needed,
-; block this TCP port with iptables (or another FW software) and reach it
-; with IPsec, SSH, or SSL vpn tunnel.  You can also make the manager
-; interface available over http/https if Asterisk's http server is enabled in
-; http.conf and if both "enabled" and "webenabled" are set to yes in
-; this file.  Both default to no.  httptimeout provides the maximum
-; timeout in seconds before a web based session is discarded.  The
-; default is 60 seconds.
-;
-[general]
-enabled = no
-;webenabled = yes
-
-port = 5038
-bindaddr = 0.0.0.0
-
-; Parameters that control AMI over TLS. ("enabled" must be set too).
-; You can open a connection to this socket with e.g.
-;
-;	openssl s_client -connect my_host:5039
-;
-;tlsenable=no		; set to YES to enable it
-;tlsbindaddr=0.0.0.0:5039		; address and port to bind to, default to bindaddr and port 5039
-;tlscertfile=/tmp/asterisk.pem	; path to the certificate.
-;tlsprivatekey=/tmp/private.pem ; path to the private key, if no private given,
-                                ; if no tlsprivatekey is given, default is to search
-								; tlscertfile for private key.
-;tlscipher=<cipher string>      ; string specifying which SSL ciphers to use or not use
-;
-;allowmultiplelogin = yes		; IF set to no, rejects manager logins that are already in use.
-;                               ; The default is yes.
-;
-;displayconnects = yes
-;
-; Add a Unix epoch timestamp to events (not action responses)
-;
-;timestampevents = yes
-
-;brokeneventsaction = yes   ; Restore previous behavior that caused the events
-                            ; action to not return a response in certain
-                            ; circumstances.  Defaults to 'no'.
-
-;
-; Display certain channel variables every time a channel-oriented
-; event is emitted:
-;
-;channelvars = var1,var2,var3
-
-; debug = on	; enable some debugging info in AMI messages (default off).
-		; Also accessible through the "manager debug" CLI command.
-
-; authtimeout specifies the maximum number of seconds a client has to
-; authenticate.  If the client does not authenticate beofre this timeout
-; expires, the client will be disconnected. (default: 30 seconds)
-
-;authtimeout = 30
-
-; authlimit specifies the maximum number of unauthenticated sessions that will
-; be allowed to connect at any given time.
-
-;authlimit = 50
-
-;httptimeout = 60
-; a) httptimeout sets the Max-Age of the http cookie
-; b) httptimeout is the amount of time the webserver waits
-;    on a action=waitevent request (actually its httptimeout-10)
-; c) httptimeout is also the amount of time the webserver keeps
-;    a http session alive after completing a successful action
-
-
-;[mark]
-;secret = mysecret
-;deny=0.0.0.0/0.0.0.0
-;permit=209.16.236.73/255.255.255.0
-;acl=named_acl_example               ; use a named ACL from acl.conf
-;
-; 
-;setvar=PBXACCOUNT=edvina
-; The setvar option defines channel variables that will be set when this account
-; originates a call. You can define multiple setvar= commands for one manager
-; user.
-;
-;eventfilter=Event: Newchannel
-;eventfilter=Channel: (PJ)?SIP/(james|jim|john)-
-;eventfilter=!Channel: DAHDI/
-; The eventfilter option is used to whitelist or blacklist events per user.
-; A filter consists of an (unanchored) regular expression that is run on the
-; entire event data. If the first character of the filter is an exclamation
-; mark (!), the filter is appended to the blacklist instead of the whitelist.
-; After first checking the read access below, the regular expression filters
-; are processed as follows:
-; - If no filters are configured all events are reported as normal.
-; - If there are white filters only: implied black all filter processed first,
-; then white filters.
-; - If there are black filters only: implied white all filter processed first,
-; then black filters.
-; - If there are both white and black filters: implied black all filter processed
-; first, then white filters, and lastly black filters.
-
-;
-; If the device connected via this user accepts input slowly,
-; the timeout for writes to it can be increased to keep it
-; from being disconnected (value is in milliseconds)
-;
-; writetimeout = 100
-;
-;displayconnects = yes	; Display on CLI user login/logoff
-;
-; Authorization for various classes
-;
-; Read authorization permits you to receive asynchronous events, in general.
-; Write authorization permits you to send commands and get back responses.  The
-; following classes exist:
-;
-; all       - All event classes below (including any we may have missed).
-; system    - General information about the system and ability to run system
-;             management commands, such as Shutdown, Restart, and Reload.
-; call      - Information about channels and ability to set information in a
-;             running channel.
-; log       - Logging information.  Read-only. (Defined but not yet used.)
-; verbose   - Verbose information.  Read-only. (Defined but not yet used.)
-; agent     - Information about queues and agents and ability to add queue
-;             members to a queue.
-; user      - Permission to send and receive UserEvent.
-; config    - Ability to read and write configuration files.
-; command   - Permission to run CLI commands.  Write-only.
-; dtmf      - Receive DTMF events.  Read-only.
-; reporting - Ability to get information about the system.
-; cdr       - Output of cdr_manager, if loaded.  Read-only.
-; dialplan  - Receive NewExten and VarSet events.  Read-only.
-; originate - Permission to originate new calls.  Write-only.
-; agi       - Output AGI commands executed.  Input AGI command to execute.
-; cc        - Call Completion events.  Read-only.
-; aoc       - Permission to send Advice Of Charge messages and receive Advice
-;           - Of Charge events.
-; test      - Ability to read TestEvent notifications sent to the Asterisk Test
-;             Suite.  Note that this is only enabled when the TEST_FRAMEWORK
-;             compiler flag is defined.
-; security  - Security Events.  Read-only.
-; message   - Permissions to send out of call messages. Write-only
-;
-;read = system,call,log,verbose,agent,user,config,dtmf,reporting,cdr,dialplan
-;write = system,call,agent,user,config,command,reporting,originate,message
-