Rename ooh323.conf to chan_ooh323.conf, make module support both names

git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@204428 65c4cc65-6c06-0410-ace0-fbb531ad65f3

1 files changed, 0 insertions, 173 deletions

diff --git a/configs/ooh323.conf.sample b/configs/ooh323.conf.sample
deleted file mode 100644
index 6d14bcbc5..000000000
--- a/configs/ooh323.conf.sample
+++ /dev/null
@@ -1,173 +0,0 @@
-; ---------------------------------------------------------------------------------
-; ---  ******* IMPORTANT NOTE ***********
-; ---
-; ---  This module is currently unsupported.  Use it at your own risk.
-; ---
-; ---------------------------------------------------------------------------------
-
-; Objective System's H323 Configuration example for Asterisk
-; ooh323c driver configuration
-;
-; [general] section defines global parameters
-;
-; This is followed by profiles which can be of three types - user/peer/friend
-; Name of the user profile should match with the h323id of the user device.
-; For peer/friend profiles, host ip address must be provided as "dynamic" is
-; not supported as of now.
-;
-; Syntax for specifying a H323 device in extensions.conf is
-; For Registered peers/friends profiles:
-;        OOH323/name where name is the name of the peer/friend profile.
-;
-; For unregistered H.323 phones:
-;        OOH323/ip[:port] OR if gk is used OOH323/alias where alias can be any H323
-;                          alias
-;
-; For dialing into another asterisk peer at a specific exten
-;       OOH323/exten/peer OR OOH323/exten@ip
-;
-; Domain name resolution is not yet supported.
-; 
-; When a H.323 user calls into asterisk, his H323ID is matched with the profile
-; name and context is determined to route the call
-;
-; The channel driver will register all global aliases and aliases defined in 
-; peer profiles with the gatekeeper, if one exists. So, that when someone
-; outside our pbx (non-user) calls an extension, gatekeeper will route that 
-; call to our asterisk box, from where it will be routed as per dial plan.
-
-
-[general]
-;Define the asetrisk server h323 endpoint
-
-;The port asterisk should listen for incoming H323 connections.
-;Default - 1720
-;port=1720
-
-;The dotted IP address asterisk should listen on for incoming H323
-;connections
-;Default - tries to find out local ip address on it's own
-bindaddr=0.0.0.0    
-
-;This parameter indicates whether channel driver should register with 
-;gatekeeper as a gateway or an endpoint.
-;Default - no
-;gateway=no
-
-;Whether asterisk should use fast-start and tunneling for H323 connections.
-;Default - yes
-;faststart=no
-;h245tunneling=no
-
-;Whether media wait for connect
-;Default - No
-;mediawaitforconnect=yes
-
-;H323-ID to be used for asterisk server
-;Default - Asterisk PBX
-h323id=ObjSysAsterisk 
-e164=100
-
-;CallerID to use for calls
-;Default - Same as h323id
-callerid=asterisk
-
-;Whether this asterisk server will use gatekeeper.
-;Default - DISABLE
-;gatekeeper = DISCOVER
-;gatekeeper = a.b.c.d
-gatekeeper = DISABLE
-
-;Location for H323 log file
-;Default - /var/log/asterisk/h323_log
-;logfile=/var/log/asterisk/h323_log
-
-
-;Following values apply to all users/peers/friends defined below, unless
-;overridden within their client definition
-
-;Sets default context all clients will be placed in.
-;Default - default
-context=default
-
-;Sets rtptimeout for all clients, unless overridden
-;Default - 60 seconds
-;rtptimeout=60	    ; Terminate call if 60 seconds of no RTP activity
-                    ; when we're not on hold
-
-;Type of Service
-;Default - none (lowdelay, thoughput, reliability, mincost, none)
-;tos=lowdelay
-
-;amaflags = default
-
-;The account code used by default for all clients.
-;accountcode=h3230101
-
-;The codecs to be used for all clients.Only ulaw and gsm supported as of now.
-;Default - ulaw
-; ONLY ulaw, gsm, g729 and g7231 supported as of now
-disallow=all     ;Note order of disallow/allow is important.
-allow=gsm
-allow=ulaw
-
-
-; dtmf mode to be used by default for all clients. Supports rfc2833, q931keypad
-; h245alphanumeric, h245signal.
-;Default - rfc 2833
-dtmfmode=rfc2833
-
-; User/peer/friend definitions:
-; User config options                    Peer config options
-; ------------------                     -------------------
-; context                            
-; disallow                               disallow
-; allow                                  allow
-; accountcode                            accountcode
-; amaflags                               amaflags
-; dtmfmode                               dtmfmode
-; rtptimeout                             ip
-;                                        port
-;                                        h323id
-;                                        email
-;                                        url
-;                                        e164
-;                                        rtptimeout
-
-;
-
-;Define users here
-;Section header is extension
-[myuser1]
-type=user
-context=context1
-disallow=all
-allow=gsm
-allow=ulaw    
-
-
-
-[mypeer1]
-type=peer
-context=context2
-ip=a.b.c.d   ; UPDATE with appropriate ip address
-port=1720    ; UPDATE with appropriate port
-e164=101
-
-
-
-[myfriend1]
-type=friend
-context=default
-ip=10.0.0.82   ; UPDATE with appropriate ip address
-port=1820    ; UPDATE with appropriate port
-disallow=all
-allow=ulaw
-e164=12345
-rtptimeout=60
-dtmfmode=rfc2833
-
-
-
-
-