configs: Move sample config files into a subdirectory of configs

This moves all samples configs from configs/ to configs/samples. This allows
for additional sets of sample configuration files to be added in the future.

Review: https://reviewboard.asterisk.org/r/3804/


git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@418870 65c4cc65-6c06-0410-ace0-fbb531ad65f3

1 files changed, 0 insertions, 75 deletions

diff --git a/configs/smdi.conf.sample b/configs/smdi.conf.sample
deleted file mode 100644
index cca0a5cb9..000000000
--- a/configs/smdi.conf.sample
+++ /dev/null
@@ -1,75 +0,0 @@
-; Asterisk SMDI configuration
-
-[interfaces]
-; Specify serial ports to listen for SMDI messages on below.  These will be
-; referenced later in chan_dahdi.conf.  If you do not specify any interfaces
-; then SMDI will be disabled.  Interfaces can have several different attributes
-; associated with them.
-
-; Set the number of stop bits to use per character here.  The default is no,
-; in which case one stop bit will be used.
-
-;twostopbits = no
-
-; Character size or bit length is the size of each character sent across the
-; link.  Character size can be 7 or 8.  The default is 7.
-
-;charsize = 7
-
-; If you need parity checking enabled you can turn it on here.  Acceptable
-; values are even, odd, and none.  The default is even.
-
-;paritybit = even
-
-; The baudrate to use for this port.  Acceptable values are 1200, 2400, 4800,
-; and 9600.  The default is 9600.
-
-;baudrate = 1200
-
-; Often the numbering scheme for a set of mailboxes or extensions will not be 7
-; or 10 digits (as SMDI requires).  Use the msdstrip option to strip unused
-; digits from the start of numbers.
-
-;msdstrip = 0
-
-; Occasionally Asterisk and the SMDI switch may become out of sync.  If this
-; happens, Asterisk will appear one or several calls behind as it processes
-; voicemail requests.  To prevent this from happening, adjust the msgexpirytime.
-; This will make Asterisk discard old SMDI messages that have not yet been
-; processed.  The default expiry time is 30000 milliseconds.
-
-;msgexpirytime = 30000
-
-;smdiport => /dev/ttyS0
-
-
-[mailboxes]
-; This section configures parameters related to MWI handling for the SMDI link.
-
-; This option configures the polling interval used to check to see if the
-; mailboxes have any new messages.  This option is specified in seconds.
-; The default value is 10 seconds.
-;
-;pollinginterval=10
-
-; Every other entry in this section of the configuration file is interpreted as
-; a mapping between the mailbox ID on the SMDI link, and the local Asterisk
-; mailbox name.  In many cases, they are the same thing, but they still must be
-; listed here so that this module knows which mailboxes it needs to pay
-; attention to.
-;
-; Syntax:
-;   <SMDI mailbox ID>=<Asterisk Mailbox Name>[@Asterisk Voicemail Context]
-;
-; If no Asterisk voicemail context is specified, "default" will be assumed.
-;
-; Before specifying mailboxes, you must specify an SMDI interface.  All mailbox
-; definitions that follow will correspond to that SMDI interface.  If you specify
-; another interface, then all definitions following that will correspond to the
-; new interface.
-;
-;smdiport=/dev/ttyS0
-;2565551234=1234@vmcontext1
-;2565555678=5678@vmcontext2
-;smdiport=/dev/ttyS1
-;2565559999=9999