res_pjsip: Symmetric transports

A new transport parameter 'symmetric_transport' has been added.

When a request from a dynamic contact comes in on a transport with
this option set to 'yes', the transport name will be saved and used
for subsequent outgoing requests like OPTIONS, NOTIFY and INVITE.
It's saved as a contact uri parameter named 'x-ast-txp' and will
display with the contact uri in CLI, AMI, and ARI output.  On the
outgoing request, if a transport wasn't explicitly set on the
endpoint AND the request URI is not a hostname, the saved transport
will be used and the 'x-ast-txp' parameter stripped from the
outgoing packet.

* config_transport was modified to accept and store the new parameter.

* config_transport/transport_apply was updated to store the transport
  name in the pjsip_transport->info field using the pjsip_transport->pool
  on UDP transports.

* A 'multihomed_on_rx_message' function was added to
  pjsip_message_ip_updater that, for incoming requests, retrieves the
  transport name from pjsip_transport->info and retrieves the transport.
  If transport->symmetric_transport is set, an 'x-ast-txp' uri parameter
  containing the transport name is added to the incoming Contact header.

* An 'ast_sip_get_transport_name' function was added to res_pjsip.
  It takes an ast_sip_endpoint and a pjsip_sip_uri and returns a
  transport name if endpoint->transport is set or if there's an
  'x-ast-txp' parameter on the uri and the uri host is an ipv4 or
  ipv6 address.  Otherwise it returns NULL.

* An 'ast_sip_dlg_set_transport' function was added to res_pjsip
  which takes an ast_sip_endpoint, a pjsip_dialog, and an optional
  pjsip_tpselector.  It calls ast_sip_get_transport_name() and if
  a non-NULL is returned, sets the selector and sets the transport
  on the dialog.  If a selector was passed in, it's updated.

* res_pjsip/ast_sip_create_dialog_uac and ast_sip_create_dialog_uas
  were modified to call ast_sip_dlg_set_transport() instead of their
  original logic.

* res_pjsip/create_out_of_dialog_request was modified to call
  ast_sip_get_transport_name() and pjsip_tx_data_set_transport()
  instead of its original logic.

* Existing transport logic was removed from endpt_send_request
  since that can only be called after a create_out_of_dialog_request.

* res_pjsip/ast_sip_create_rdata was converted to a wrapper around
  a new 'ast_sip_create_rdata_with_contact' function which allows
  a contact_uri to be specified in addition to the existing
  parameters.  (See below)

* res_pjsip_pubsub/internal_pjsip_evsub_send_request was eliminated
  since all it did was transport selection and that is now done in
  ast_sip_create_dialog_uac and ast_sip_create_dialog_uas.

* 'contact_uri' was added to subscription_persistence.  This was
  necessary because although the parsed rdata contact header has the
  x-ast-txp parameter added (if appropriate),
  subscription_persistence_update stores the raw packet which
  doesn't have it.  subscription_persistence_recreate was then
  updated to call ast_sip_create_rdata_with_contact with the
  persisted contact_uri so the recreated subscription has the
  correct transport info to send the NOTIFYs.

* res_pjsip_session/internal_pjsip_inv_send_msg was eliminated since
  all it did was transport selection and that is now done in
  ast_sip_create_dialog_uac.

* pjsip_message_ip_updater/multihomed_on_tx_message was updated
  to remove all traces of the x-ast-txp parameter from the
  outgoing headers.

NOTE:  This change does NOT modify the behavior of permanent
contacts specified on an aor.  To do so would require that the
permanent contact's contact uri be updated with the x-ast-txp
parameter and the aor sorcery object updated.  If we need to
persue this, we need to think about cloning permanent contacts into
the same store as the dynamic ones on an aor load so they can be
updated without disturbing the originally configured value.

You CAN add the x-ast-txp parameter to a permanent contact's uri
but it would be much simpler to just set endpoint->transport.

Change-Id: I4ee1f51473da32ca54b877cd158523efcef9655f

2 files changed, 33 insertions, 0 deletions

diff --git a/contrib/ast-db-manage/config/versions/15db7b91a97a_add_rtcp_mux.py b/contrib/ast-db-manage/config/versions/15db7b91a97a_add_rtcp_mux.py
index 50d3ee338..8b0214a17 100644
--- a/contrib/ast-db-manage/config/versions/15db7b91a97a_add_rtcp_mux.py
+++ b/contrib/ast-db-manage/config/versions/15db7b91a97a_add_rtcp_mux.py
@@ -12,6 +12,7 @@ down_revision = '465e70e8c337'
 
 from alembic import op
 import sqlalchemy as sa
+from sqlalchemy.dialects.postgresql import ENUM
 
 YESNO_NAME = 'yesno_values'
 YESNO_VALUES = ['yes', 'no']
diff --git a/contrib/ast-db-manage/config/versions/f638dbe2eb23_symmetric_transport.py b/contrib/ast-db-manage/config/versions/f638dbe2eb23_symmetric_transport.py
new file mode 100644
index 000000000..51b5066f5
--- /dev/null
+++ b/contrib/ast-db-manage/config/versions/f638dbe2eb23_symmetric_transport.py
@@ -0,0 +1,32 @@
+"""symmetric_transport
+
+Revision ID: f638dbe2eb23
+Revises: 15db7b91a97a
+Create Date: 2017-03-09 09:38:59.513479
+
+"""
+
+# revision identifiers, used by Alembic.
+revision = 'f638dbe2eb23'
+down_revision = '15db7b91a97a'
+
+from alembic import op
+import sqlalchemy as sa
+from sqlalchemy.dialects.postgresql import ENUM
+
+YESNO_NAME = 'yesno_values'
+YESNO_VALUES = ['yes', 'no']
+
+def upgrade():
+    ############################# Enums ##############################
+
+    # yesno_values have already been created, so use postgres enum object
+    # type to get around "already created" issue - works okay with mysql
+    yesno_values = ENUM(*YESNO_VALUES, name=YESNO_NAME, create_type=False)
+
+    op.add_column('ps_transports', sa.Column('symmetric_transport', yesno_values))
+    op.add_column('ps_subscription_persistence', sa.Column('contact_uri', sa.String(256)))
+
+def downgrade():
+    op.drop_column('ps_subscription_persistence', 'contact_uri')
+    op.drop_column('ps_transports', 'symmetric_transport')