Fix escaping and some of the formattting (closes issue #10285)

git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@76874 65c4cc65-6c06-0410-ace0-fbb531ad65f3

1 files changed, 5 insertions, 5 deletions

diff --git a/doc/tex/hardware.tex b/doc/tex/hardware.tex
index 3d7cabd82..f1b1b9ecf 100644
--- a/doc/tex/hardware.tex
+++ b/doc/tex/hardware.tex
@@ -1,8 +1,8 @@
 \subsection{Introduction}
 
 A PBX is only really useful if you can get calls into it.  Of course, you
-can use Asterisk with VoIP calls (SIP, H.323, IAX), but you can also talk
-to the real PSTN through various cards.
+can use Asterisk with VoIP calls (SIP, H.323, IAX, etc.), but you can also 
+talk to the real PSTN through various cards.
 
 Supported Hardware is divided into two general groups:  Zaptel devices and 
 non-zaptel devices.  The Zaptel compatible hardware supports pseudo-TDM 
@@ -31,7 +31,7 @@ compatible hardware may have different features.
        \item TE210P - The TE210P improves performance and scalability through bus mastering architecture. It supports E1, T1, and J1 environments and is selectable on a per-card or per-port basis.
        \item TE207P - The TE207P offers an on-board DSP-based echo cancellation module. It supports E1, T1, and J1 environments and is selectable on a per-card or per-port basis.
        \item TE205P - The TE205P improves performance and scalability through bus mastering architecture. It supports both E1 and T1/J1 environments and is selectable on a per-card or per-port basis.
-       \item TE120P - The TE120P is a single span, selectable T1, E1, or J1 card and utilizes Digium's VoiceBus™ technology. It supports both voice and data modes.	     	
+       \item TE120P - The TE120P is a single span, selectable T1, E1, or J1 card and utilizes Digium's VoiceBus\texttrademark technology. It supports both voice and data modes.       
        \item TE110P - The TE110P brings a high-performance, cost-effective, and flexible single span togglable T1, E1, J1 interface to the Digium line-up of telephony interface devices.
      \end{itemize}
   \end{itemize}
@@ -60,7 +60,7 @@ chan\_misdn. See the mISDN section for more information.
 
 \begin{itemize}
   \item Digium, Inc. (Primary Developer of Asterisk) 
-	http://www.digium.com
+  http://www.digium.com
   \begin{itemize}
     \item B410P - 4 Port BRI card (TE/NT)
    \end{itemize}
@@ -68,7 +68,7 @@ chan\_misdn. See the mISDN section for more information.
 
 \begin{itemize}
   \item beroNet 
-	http://www.beronet.com
+  http://www.beronet.com
   \begin{itemize}
     \item BN4S0 - 4 Port BRI card (TE/NT)