summaryrefslogtreecommitdiff
path: root/channels/misdn_config.c
diff options
context:
space:
mode:
Diffstat (limited to 'channels/misdn_config.c')
-rw-r--r--channels/misdn_config.c113
1 files changed, 69 insertions, 44 deletions
diff --git a/channels/misdn_config.c b/channels/misdn_config.c
index f447c5c21..444b939f2 100644
--- a/channels/misdn_config.c
+++ b/channels/misdn_config.c
@@ -132,7 +132,7 @@ static const struct misdn_cfg_spec port_spec[] = {
{ "musicclass", MISDN_CFG_MUSICCLASS, MISDN_CTYPE_STR, "default", NONE,
"Sets the musiconhold class." },
{ "callerid", MISDN_CFG_CALLERID, MISDN_CTYPE_STR, "", NONE,
- "Sets the caller ID." },
+ "Set the outgoing caller id to the value." },
{ "method", MISDN_CFG_METHOD, MISDN_CTYPE_STR, "standard", NONE,
"Set the method to use for channel selection:\n"
"\t standard - Use the first free channel starting from the lowest number.\n"
@@ -140,62 +140,71 @@ static const struct misdn_cfg_spec port_spec[] = {
"\t round_robin - Use the round robin algorithm to select a channel. Use this\n"
"\t if you want to balance your load." },
{ "dialplan", MISDN_CFG_DIALPLAN, MISDN_CTYPE_INT, "0", NONE,
- "Dialplan means Type Of Number in ISDN Terms (for outgoing calls)\n"
- "\n"
+ "Dialplan means Type Of Number in ISDN Terms\n"
"\tThere are different types of the dialplan:\n"
"\n"
- "\tdialplan -> outgoing Number\n"
- "\tlocaldialplan -> callerid\n"
- "\tcpndialplan -> connected party number\n"
+ "\tdialplan -> for outgoing call's dialed number\n"
+ "\tlocaldialplan -> for outgoing call's callerid\n"
+ "\t (if -1 is set use the value from the asterisk channel)\n"
+ "\tcpndialplan -> for incoming call's connected party number sent to caller\n"
+ "\t (if -1 is set use the value from the asterisk channel)\n"
"\n"
"\tdialplan options:\n"
"\n"
"\t0 - unknown\n"
"\t1 - International\n"
"\t2 - National\n"
- "\t4 - Subscriber\n"
- "\n"
- "\tThis setting is used for outgoing calls." },
+ "\t4 - Subscriber" },
{ "localdialplan", MISDN_CFG_LOCALDIALPLAN, MISDN_CTYPE_INT, "0", NONE,
- "Dialplan means Type Of Number in ISDN Terms (for outgoing calls)\n"
- "\n"
+ "Dialplan means Type Of Number in ISDN Terms\n"
"\tThere are different types of the dialplan:\n"
"\n"
- "\tdialplan -> outgoing Number\n"
- "\tlocaldialplan -> callerid\n"
- "\tcpndialplan -> connected party number\n"
+ "\tdialplan -> for outgoing call's dialed number\n"
+ "\tlocaldialplan -> for outgoing call's callerid\n"
+ "\t (if -1 is set use the value from the asterisk channel)\n"
+ "\tcpndialplan -> for incoming call's connected party number sent to caller\n"
+ "\t (if -1 is set use the value from the asterisk channel)\n"
"\n"
"\tdialplan options:\n"
"\n"
"\t0 - unknown\n"
"\t1 - International\n"
"\t2 - National\n"
- "\t4 - Subscriber\n"
- "\n"
- "\tThis setting is used for outgoing calls." },
+ "\t4 - Subscriber" },
{ "cpndialplan", MISDN_CFG_CPNDIALPLAN, MISDN_CTYPE_INT, "0", NONE,
- "Dialplan means Type Of Number in ISDN Terms (for outgoing calls)\n"
- "\n"
+ "Dialplan means Type Of Number in ISDN Terms\n"
"\tThere are different types of the dialplan:\n"
"\n"
- "\tdialplan -> outgoing Number\n"
- "\tlocaldialplan -> callerid\n"
- "\tcpndialplan -> connected party number\n"
+ "\tdialplan -> for outgoing call's dialed number\n"
+ "\tlocaldialplan -> for outgoing call's callerid\n"
+ "\t (if -1 is set use the value from the asterisk channel)\n"
+ "\tcpndialplan -> for incoming call's connected party number sent to caller\n"
+ "\t (if -1 is set use the value from the asterisk channel)\n"
"\n"
"\tdialplan options:\n"
"\n"
"\t0 - unknown\n"
"\t1 - International\n"
"\t2 - National\n"
- "\t4 - Subscriber\n"
- "\n"
- "\tThis setting is used for outgoing calls." },
- { "nationalprefix", MISDN_CFG_NATPREFIX, MISDN_CTYPE_STR, "0", NONE,
- "Prefix for national, this is put before the\n"
- "\toad if an according dialplan is set by the other end." },
- { "internationalprefix", MISDN_CFG_INTERNATPREFIX, MISDN_CTYPE_STR, "00", NONE,
- "Prefix for international, this is put before the\n"
- "\toad if an according dialplan is set by the other end." },
+ "\t4 - Subscriber" },
+ { "unknownprefix", MISDN_CFG_TON_PREFIX_UNKNOWN, MISDN_CTYPE_STR, "", NONE,
+ "Prefix for unknown numbers, this is put before an incoming number\n"
+ "\tif its type-of-number is unknown." },
+ { "internationalprefix", MISDN_CFG_TON_PREFIX_INTERNATIONAL, MISDN_CTYPE_STR, "00", NONE,
+ "Prefix for international numbers, this is put before an incoming number\n"
+ "\tif its type-of-number is international." },
+ { "nationalprefix", MISDN_CFG_TON_PREFIX_NATIONAL, MISDN_CTYPE_STR, "0", NONE,
+ "Prefix for national numbers, this is put before an incoming number\n"
+ "\tif its type-of-number is national." },
+ { "netspecificprefix", MISDN_CFG_TON_PREFIX_NETWORK_SPECIFIC, MISDN_CTYPE_STR, "", NONE,
+ "Prefix for network-specific numbers, this is put before an incoming number\n"
+ "\tif its type-of-number is network-specific." },
+ { "subscriberprefix", MISDN_CFG_TON_PREFIX_SUBSCRIBER, MISDN_CTYPE_STR, "", NONE,
+ "Prefix for subscriber numbers, this is put before an incoming number\n"
+ "\tif its type-of-number is subscriber." },
+ { "abbreviatedprefix", MISDN_CFG_TON_PREFIX_ABBREVIATED, MISDN_CTYPE_STR, "", NONE,
+ "Prefix for abbreviated numbers, this is put before an incoming number\n"
+ "\tif its type-of-number is abbreviated." },
{ "presentation", MISDN_CFG_PRES, MISDN_CTYPE_INT, "-1", NONE,
"These (presentation and screen) are the exact isdn screening and presentation\n"
"\tindicators.\n"
@@ -212,6 +221,22 @@ static const struct misdn_cfg_spec port_spec[] = {
"\n"
"\tscreen=0, presentation=0 -> callerid presented\n"
"\tscreen=1, presentation=1 -> callerid restricted (the remote end doesn't see it!)" },
+ { "display_connected", MISDN_CFG_DISPLAY_CONNECTED, MISDN_CTYPE_INT, "0", NONE,
+ "Put a display ie in the CONNECT message containing the following\n"
+ "\tinformation if it is available (nt port only):\n"
+ "\n"
+ "\t0 - Do not put the connected line information in the display ie.\n"
+ "\t1 - Put the available connected line name in the display ie.\n"
+ "\t2 - Put the available connected line number in the display ie.\n"
+ "\t3 - Put the available connected line name and number in the display ie." },
+ { "display_setup", MISDN_CFG_DISPLAY_SETUP, MISDN_CTYPE_INT, "0", NONE,
+ "Put a display ie in the SETUP message containing the following\n"
+ "\tinformation if it is available (nt port only):\n"
+ "\n"
+ "\t0 - Do not put the caller information in the display ie.\n"
+ "\t1 - Put the available caller name in the display ie.\n"
+ "\t2 - Put the available caller number in the display ie.\n"
+ "\t3 - Put the available caller name and number in the display ie." },
{ "always_immediate", MISDN_CFG_ALWAYS_IMMEDIATE, MISDN_CTYPE_BOOL, "no", NONE,
"Enable this to get into the s dialplan-extension.\n"
"\tThere you can use DigitTimeout if you can't or don't want to use\n"
@@ -220,7 +245,7 @@ static const struct misdn_cfg_spec port_spec[] = {
{ "nodialtone", MISDN_CFG_NODIALTONE, MISDN_CTYPE_BOOL, "no", NONE,
"Enable this to prevent chan_misdn to generate the dialtone\n"
"\tThis makes only sense together with the always_immediate=yes option\n"
- "\tto generate your own dialtone with Playtones or so."},
+ "\tto generate your own dialtone with Playtones or so." },
{ "immediate", MISDN_CFG_IMMEDIATE, MISDN_CTYPE_BOOL, "no", NONE,
"Enable this if you want callers which called exactly the base\n"
"\tnumber (so no extension is set) to jump into the s extension.\n"
@@ -257,17 +282,17 @@ static const struct misdn_cfg_spec port_spec[] = {
#endif
#ifdef WITH_BEROEC
{ "bnechocancel", MISDN_CFG_BNECHOCANCEL, MISDN_CTYPE_BOOLINT, "yes", 64,
- "echotail in ms (1-200)\n"},
+ "echotail in ms (1-200)" },
{ "bnec_antihowl", MISDN_CFG_BNEC_ANTIHOWL, MISDN_CTYPE_INT, "0", NONE,
- "Use antihowl\n"},
+ "Use antihowl" },
{ "bnec_nlp", MISDN_CFG_BNEC_NLP, MISDN_CTYPE_BOOL, "yes", NONE,
- "Nonlinear Processing (much faster adaption)"},
+ "Nonlinear Processing (much faster adaption)" },
{ "bnec_zerocoeff", MISDN_CFG_BNEC_ZEROCOEFF, MISDN_CTYPE_BOOL, "no", NONE,
- "ZeroCoeffeciens\n"},
+ "ZeroCoeffeciens" },
{ "bnec_tonedisabler", MISDN_CFG_BNEC_TD, MISDN_CTYPE_BOOL, "no", NONE,
- "Disable Tone\n"},
+ "Disable Tone" },
{ "bnec_adaption", MISDN_CFG_BNEC_ADAPT, MISDN_CTYPE_INT, "1", NONE,
- "Adaption mode (0=no,1=full,2=fast)\n"},
+ "Adaption mode (0=no,1=full,2=fast)" },
#endif
{ "need_more_infos", MISDN_CFG_NEED_MORE_INFOS, MISDN_CTYPE_BOOL, "0", NONE,
"Send Setup_Acknowledge on incoming calls anyway (instead of PROCEEDING),\n"
@@ -311,13 +336,13 @@ static const struct misdn_cfg_spec port_spec[] = {
{ "faxdetect_context", MISDN_CFG_FAXDETECT_CONTEXT, MISDN_CTYPE_STR, NO_DEFAULT, NONE,
"Context to jump into if we detect a fax. Don't set this if you want to stay in the current context." },
{ "l1watcher_timeout", MISDN_CFG_L1_TIMEOUT, MISDN_CTYPE_BOOLINT, "0", 4,
- "Watches the layer 1. If the layer 1 is down, it tries to\n"
- "\tget it up. The timeout is given in seconds. with 0 as value it\n"
- "\tdoes not watch the l1 at all\n"
+ "Monitors L1 of the port. If L1 is down it tries\n"
+ "\tto bring it up. The polling timeout is given in seconds.\n"
+ "\tSetting the value to 0 disables monitoring L1 of the port.\n"
"\n"
- "\tThis option is only read at loading time of chan_misdn, which\n"
- "\tmeans you need to unload and load chan_misdn to change the value,\n"
- "\tan Asterisk restart should do the trick." },
+ "\tThis option is only read at chan_misdn loading time.\n"
+ "\tYou need to unload and load chan_misdn to change the\n"
+ "\tvalue. An asterisk restart will also do the trick." },
{ "overlapdial", MISDN_CFG_OVERLAP_DIAL, MISDN_CTYPE_BOOLINT, "0", 4,
"Enables overlap dial for the given amount of seconds.\n"
"\tPossible values are positive integers or:\n"
generated by cgit v1.2.3 (git 2.39.1) at 2024-06-29 23:29:46 +0000