diff options
Diffstat (limited to 'configs/chan_dahdi.conf.sample')
| -rw-r--r-- | configs/chan_dahdi.conf.sample | 51 |
1 files changed, 49 insertions, 2 deletions
diff --git a/configs/chan_dahdi.conf.sample b/configs/chan_dahdi.conf.sample index 83701ef00..2c0488aec 100644 --- a/configs/chan_dahdi.conf.sample +++ b/configs/chan_dahdi.conf.sample @@ -1371,12 +1371,35 @@ pickupgroup=1 ; This option is used to disable automatic sending of ACM when the call is started ; in the dialplan. If you do use this option, you will need to use the Proceeding() -; application in the dialplan to send ACM. -;ss7_explictacm=yes +; application in the dialplan to send ACM or enable ss7_autoacm below. +;ss7_explicitacm=yes + +; Use this option to automatically send ACM when the call rings or is answered and +; has not seen proceeding yet. If you use this option, you should disable ss7_explicitacm. +; You may still use Proceeding() to explicitly send an ACM from the dialplan. +;ss7_autoacm=yes + +; Create the linkset with all CICs in hardware remotely blocked state. +;ss7_initialhwblo=yes + +; This option is whether or not to trust the remote echo control indication. This means +; that in cases where echo control is reported by the remote end, we will trust them and +; not enable echo cancellation on the call. +;ss7_use_echocontrol=yes + +; This option is to set what our echo control indication is to the other end. Set to +; yes to indicate that we are using echo cancellation or no if we are not. +;ss7_default_echocontrol=yes ; All settings apply to linkset 1 ;linkset = 1 +; Set the Signaling Link Code (SLC) for each sigchan. +; If you manually set any you need to manually set all. +; Should be defined before sigchan. +; The default SLC starts with zero and increases for each defined sigchan. +;slc= + ; Point code of the linkset. For ITU, this is the decimal number ; format of the point code. For ANSI, this can either be in decimal ; number format or in the xxx-xxx-xxx format @@ -1410,6 +1433,30 @@ pickupgroup=1 ; Channels to associate with CICs on this linkset ;channel = 25-47 ; + +; Set this option if you wish to send an Information Request Message (INR) request +; if no calling party number is specified. This will attempt to tell the other end +; to send it anyways. Should be defined after sigchan. +;inr_if_no_calling=yes + +; Set this to set whether or not the originating access is (non) ISDN in the forward and +; backward call indicators. Should be defined after sigchan +;non_isdn_access=yes + +; This sets the number of binary places to shift the CIC when doing load balancing between +; sigchans on a linkset. Should be defined after sigchan. Default 0 +;sls_shift = 0 + +; Send custom cause_location value +; Should be defined after sigchan. Default 1 (private local) +;cause_location=1 + +; SS7 timers (ISUP and MTP3) should be explicitly defined for each linkset to be used. +; For a full list of supported timers and their default values (applicable for both ITU +; and ANSI) see ss7.timers +; Should be defined after sigchan +;#include ss7.timers + ; For more information on setting up SS7, see the README file in libss7 or ; https://wiki.asterisk.org/wiki/display/AST/Signaling+System+Number+7 ; ----------------- SS7 Options ---------------------------------------- |