diff options
Diffstat (limited to 'configs/chan_dahdi.conf.sample')
| -rw-r--r-- | configs/chan_dahdi.conf.sample | 56 |
1 files changed, 52 insertions, 4 deletions
diff --git a/configs/chan_dahdi.conf.sample b/configs/chan_dahdi.conf.sample index fb0d06931..30229b5fc 100644 --- a/configs/chan_dahdi.conf.sample +++ b/configs/chan_dahdi.conf.sample @@ -85,10 +85,11 @@ ;service_message_support=yes ; Enable service message support for channel. Must be set after switchtype. ; -; PRI Reverse Charging Indication: Indicate to the called party that the -; call will be reverse charged. To enable, prefix the dialed number with one -; of the following letters: -; C - Reverse Charge Indication Requested +; Dialing options for ISDN (i.e., Dial(DAHDI/g1/exten/options)): +; R Reverse Charge Indication +; Indicate to the called party that the call will be reverse charged. +; K(n) Keypad digits n +; Send out the specified digits as keypad digits. ; ; PRI Dialplan: The ISDN-level Type Of Number (TON) or numbering plan, used for ; the dialed number. For most installations, leaving this as 'unknown' (the @@ -236,9 +237,52 @@ ; May vary in other ISDN standards (Q.931 1993 : 90000 ms) ; T313: Wait for CONNECT acknowledge, CPE side only (default 3000 ms) ; +; T-RESPONSE: Maximum time to wait for a typical APDU response. (default 4000 ms) +; This is an implementation timer when the standard does not specify one. +; T-ACTIVATE: Request supervision timeout. (default 10000 ms) +; T-RETENTION: Maximum time to wait for user A to activate call-completion. (default 30000 ms) +; Used by ETSI PTP, ETSI PTMP, and Q.SIG as the cc_offer_timer. +; T-CCBS1: T-STATUS timer equivalent for CC user A status. (default 4000 ms) +; T-CCBS2: Maximum time the CCBS service will be active (default 45 min in ms) +; T-CCBS3: Maximum time to wait for user A to respond to user B availability. (default 20000 ms) +; T-CCBS5: Network B CCBS supervision timeout. (default 60 min in ms) +; T-CCBS6: Network A CCBS supervision timeout. (default 60 min in ms) +; T-CCNR2: Maximum time the CCNR service will be active (default 180 min in ms) +; T-CCNR5: Network B CCNR supervision timeout. (default 195 min in ms) +; T-CCNR6: Network A CCNR supervision timeout. (default 195 min in ms) +; CC-T1: Q.SIG CC request supervision timeout. (default 30000 ms) +; CCBS-T2: Q.SIG CCBS supervision timeout. (default 60 min in ms) +; CCNR-T2: Q.SIG CCNR supervision timeout. (default 195 min in ms) +; CC-T3: Q.SIG CC Maximum time to wait for user A to respond to user B availability. (default 30000 ms) +; ;pritimer => t200,1000 ;pritimer => t313,4000 ; +; CC PTMP recall mode: +; specific - Only the CC original party A can participate in the CC callback +; global - Other compatible endpoints on the PTMP line can be party A in the CC callback +; +; cc_ptmp_recall_mode cannot be changed on a reload. +; +;cc_ptmp_recall_mode = specific +; +; CC Q.SIG Party A (requester) retain signaling link option +; retain Require that the signaling link be retained. +; release Request that the signaling link be released. +; do_not_care The responder is free to choose if the signaling link will be retained. +; +;cc_qsig_signaling_link_req = retain +; +; CC Q.SIG Party B (responder) retain signaling link option +; retain Prefer that the signaling link be retained. +; release Prefer that the signaling link be released. +; +;cc_qsig_signaling_link_rsp = retain +; +; See ccss.conf.sample for more options. The timers described by ccss.conf.sample +; are not used by ISDN for the native protocol since they are defined by the +; standards and set by pritimer above. +; ; To enable transmission of facility-based ISDN supplementary services (such ; as caller name from CPE over facility), enable this option. ; Cannot be changed on a reload. @@ -267,6 +311,10 @@ ; fxo_ks: FXO (Kewl Start) ; pri_cpe: PRI signalling, CPE side ; pri_net: PRI signalling, Network side +; bri_cpe: BRI PTP signalling, CPE side +; bri_net: BRI PTP signalling, Network side +; bri_cpe_ptmp: BRI PTMP signalling, CPE side +; bri_net_ptmp: BRI PTMP signalling, Network side ; sf: SF (Inband Tone) Signalling ; sf_w: SF Wink ; sf_featd: SF Feature Group D (The fake, Adtran style, DTMF) |