| Age | Commit message (Collapse) | Author |
|---|
|
ASTERISK-26375 #close
Change-Id: I46496af5cae41413e76d44d2068a7431279f09dc
|
|
|
|
|
|
The output of CLI "queue show" and AMI Queues action is truncated and
"failed to extend from 240 to 327" messages are generated if the queue
member and interface names are lengthy.
* Increase the string buffer size from 240 to 512 in order to accommodate
for more information fields added to the output since v1.8.
ASTERISK-26360 #close
Reported by: Richard Mudgett
Change-Id: Id99c03cf5362453b80491a4b3b0434cb67aa966d
|
|
|
|
Previously, the Contact was stored only on initial INVITE and on any
18X and 200. That meant that after re-INVITEs from *us* the Contact
could get updated, but after re-INVITEs from the *peer*, it did not.
This changeset fixes this inconsistency, properly allowing target
refreshes through re-INVITES (RFC3261, 12.2).
If your strictrtp setting allows it, this change allows you to switch
the source IP of a connected/calling device mid-call with a simple
re-INVITE from the new IP.
ASTERISK-26358 #close
Change-Id: Ibb8512054ab27c8c3d2514022568fde943bf2435
|
|
If you use the safe_asterisk script, it uses hardcoded defaults before
running configurable values from /etc/asterisk/startup.d. The hardcoded
default has TTY=9. Some containerized environments don't have such a
TTY, and safe_asterisk would stop.
The custom configuration from /etc/asterisk/startup.d/* isn't read until
after it stopped, so changing TTY in a custom config did not help.
This changeset changes safe_asterisk to continue if the TTY setting was
untouched and /dev/tty9 and /dev/vc/9 aren't found.
Change-Id: I2c7cdba549b77f418a0af4cb1227e8e6fe4148fc
|
|
The code was incorrectly invoking the unidentified logic when
an endpoint had actually been identified, causing log messages
to be output.
ASTERISK-26349 #close
Change-Id: Id8104fc9e3d138d5e8b6f6977ecc08765fd17d4f
|
|
In some scenarios dialog_initialize_rtp can be called multiple times on
the same dialog. This can cause RTP instances to be leaked along with
multiple file descriptors for each instance.
This change makes it so the existing RTP instances are destroyed and
not overwritten, stopping the memory leak.
ASTERISK-26272 #close
patches:
ASTERISK-26272-13.patch submitted by Corey Farrell (license 5909)
Change-Id: Id529de1184c68f2f4d254ab41a1f458dafdb5f73
|
|
The endpoint identification PJSIP module is intended to identify which
endpoint an incoming request is from. If an endpoint is not identified,
then an artificial endpoint is used in its place when proceeding.
The problem is that the ACK request type is an exception to the rule.
The artificial endpoint is not used when processing an ACK. This results
in the possibility of having a NULL endpoint being used further on.
The reason ACK is an exception is an attempt not to spam security logs
with unidentified requests. Presumably, you've already logged the
unidentified request on the preceeding INVITE.
Up until Asterisk 13.10, retrieving a NULL endpoint in this fashion
didn't cause an issue. A new change in 13.10 added endpoint ACL checking
shortly after endpoint identification. Because we are accessing a NULL
endpoint, this ACL check resulted in a crash.
The fix here is to be sure to retrieve the artificial endpoint for all
request types. ACKs still do not generate unidentified request security
events.
ASTERISK-26264 #close
Reported by nappsoft
AST-2016-006
Change-Id: Ie0c795ae2d72273decb972dd74b6a1489fb6b703
|
|
|
|
|
|
|
|
* Eliminated RAII_VAR in get_outbound_endpoint().
* Simplify update_to() coding. However, this function can only be a NoOp
because the To string can only be a URI and not a name-address formatted
string.
* Simplify update_from() coding. Also fixed a code path modifying the
from string when the caller could still want to use the original string.
* Fixed msg_data_create() incompletely removing the "pjsip:" to then add
back the "sip:" string if needed. The code didn't handle the "pjsip:sip:"
case because it left the colon after pjsip in the string.
Change-Id: I68a09a665f6d4daa9eaa59069045ab69122e28db
|
|
Currently when you add global headers from the dialplan both
the header in the dialplan and the globally configured header
are added to the resulting SIP INVITE. This change makes it
so the headers in the dialplan take precedence and are the
only ones added.
Change-Id: I36f864298f38db3632ad503edc11267cb8ffb3ad
|
|
Privacy/Screening option" into 13
|
|
|
|
into 13
|
|
|
|
Some configuration directives were not initialized on reload, and hence
were not reset to default if they were removed from followme.conf.
ASTERISK-26288 #close
Change-Id: Ief829e16374ad1e0ecfd63e6ee4923b5a1d1c150
|
|
RTP." into 13
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The DPMA and g729a, silk, siren7 and siren14 codecs hosted at
http://downloads.digium.com/pub/telephony/ are now listed in the
"External" sections of the "Resource Modules" and "Codec Translators"
pages in menuselect. Any that are selected will automatically be
downloaded and installed when "make install" is run. Their LICENSE and
README (if avaialble) files will be installed to
ASTVARLIBDIR/documentation/thirdparty/<product_name>.
Example use with codecs:
The codecs/codecs.xml file is a menuselect style xml file that lists
the codecs to be included. Their support levels are 'external', which
triggers the download and install, and defaultenabled is no. Also
because codec_g729a is actually in a directory named codec_g729 on the
download server, the newly added 'member_data' element is used to
override the default of the directory name being the package name. You
can use the 'directory_name' attribute to keep default base URL
(http://downloads.digium.com/pub/telephony/) but use the new directory,
or you use the 'remote_url' attribute to specify a full URL to the
download directory. In this case, you must still follow the same
subdirectory naming conventions as that used for the packages located
at 'http://downloads.digium.com/pub/telephony'.
A new configure option '--with-externals-cache' was added and like
'--with-sounds-cache' it allows the installer to cache tarballs so
they're not downloaded every time.
To assist with the download and install process, each external package
now has a manifest.xml file that, among other things, contains a package
version and checksums for each file in the tarball. The manifest is
saved to both the cache directory and ASTMODDIR and together with the
manifest.xml on the downloads site, tells the install scripts whether
a download and/or update is needed.
bash and xmlstarlet are required for downloader operation. If they're
not installed, the external items in menuselect will be unavailable.
Change-Id: Id3dcf1289ffd3cb0bbd7dfab3cafbb87be60323a
|
|
|
|
Certain SNOM phones send so-called "optional crypto" in their SDP body.
Regular SRTP setup looks like this:
m=audio 64620 RTP/SAVP 8 0 9 99 3 18 4 101
a=crypto:1 AES_CM_128_HMAC_SHA1_32 inline:...
SNOM-style "optional crypto" looks like this:
m=audio 61438 RTP/AVP 8 0 9 99 3 18 4 101
a=crypto:1 AES_CM_128_HMAC_SHA1_32 inline:...
A crypto line is supplied, but the m-line does not have SAVP.
When res_srtp.so is *not* loaded, then chan_sip.so treats the optional
crypto as regular RTP, but when res_srtp.so *is* loaded, it refuses the
incoming call with the following message:
WARNING: process_sdp: Failed to receive SDP offer/answer with
required SRTP crypto attributes for audio
For platforms that want to start providing SRTP this presents a
compatibility problem.
This changeset lets chan_sip handle the SDP as if no crypto-line was
supplied: i.e. accept the call as regular RTP, just like it did before
res_srtp was loaded.
Now you'll get this informative warning instead:
WARNING: Ignoring crypto attribute in SDP because RTP transport is
insecure
ASTERISK-23989 #close
Reported by: Olle Johansson
Change-Id: I91a15ae05a0296e398d6b65f53bb11afde1d80e2
|
|
channel" into 13
|
|
In any scenario in which the callee is not connected to the caller, the
current code in app_dial will crash due to raising a Dial End Stasis
Message after the callee channel has been hung up. This patch corrects
the error by simply moving the explicit hangup of the callee (peer)
channel until after the dial end message.
ASTERISK-25691 #close
Change-Id: I816a414014424d0d8c80e2a3cbef13ef8c63798d
|
|
If the callee selects option '5' using the Dial application's privacy
(P) option, the DIALSTATUS is erroneously set to ANSWER. This option
reflects the callee sending the caller to VoiceMail one time; the call
is definitely *not* ANSWERed in such a scenario. With this patch, the
DIALSTATUS is instead set to NOANSWER, which is the same DIALSTATUS that
is set when the 'send to VoiceMail every time' option is set.
ASTERISK-25691
Change-Id: Iaf0c9f0fa00545e7366443875e2bb7d9a89a1358
|
|
Change-Id: I8aebad1fdcf303bd115b59a4b57fbbd5b2267f09
|
|
Change-Id: Ied0c06043d1dfef8fdc9c9a808cf89b118119838
|
|
Change-Id: Ia6a58f8c73a30da6874b3f94364dce162d6f1ad3
|
|
Change-Id: I48b8e150f96a3d2a24d8fc25fbe4f5aff9f4a6b2
|
|
Change-Id: I6f30e5f9fcf8469ba0079fbf884047d54c2c0b15
|
|
Change-Id: If35174614545727817d329c60ba4456c028941b5
|
|
Change-Id: Ie627def9604ae30abd80754f9e6f09874825aec6
|
|
* Make ast_format_cap_get_names() NULL tolerant.
ASTERISK-26331 #close
Reported by: CGI.NET
Change-Id: Id67e93936dc8ec2a33a9d33655843d43b59285a3
|
|
On heavy loaded system the TCP/TLS incoming calls could be
disconnected by pjproject while these calls are being
processed by asterisk which could use the session's memory pools.
If the session in the disconnected state then the session memory
pools were already freed, so we get segfault.
This patch adds a lifetime control on an INVITE session to pjproject.
The lifetime of the session is manipulated by calling
pjsip_inv_add_ref/pjsip_inv_dec_ref.
This patch uses these functions to inform pjproject that the
session is in use.
This patch adds check if the session state is not disconnected
and also checks if the memory pool is not NULL.
This patch also places tasks 'session_end' and 'session_end_completion'
into session's serializer to avoid race condition.
ASTERISK-26291 #close
Change-Id: I4d28b1fb3b91f0492a911d110049d670fdc3c8d7
|
|
Confbridge announcements tend to block a channel while they are being
played. In some circumstances, this is warranted since you want that
particular channel not to hear the announcement (Example: "John Doe has
entered the conference"). For others it makes less sense.
This change first introduces methods for playing sounds asynchronously
into the conference. This is very similar to how synchronous sounds are
played, except the channel initiating the playback does not wait for the
sound to complete before moving on.
Asynchronous announcements are used for two circumstances:
* Sounds played for a user after they have left the bridge
* Sounds that play first to a single user and then the rest of the
conference (if the channel and conference use the same language)
ASTERISK-26289 #close
Reported by Mark Michelson
Change-Id: Ie486bb3de1646d50894489030326a423e594ab0a
|
|
|
|
|
|
Previously, the buffer used for MP3 streamed from HTTP servers had a size of
1 MB. For 8 kHz mono audio at 16 bit resolution, such a buffer covers about 1
minute. Only when the buffer is full does audio start to play.
For MP3 files streamed from a server, that is usually not a big deal as long as
the connection to the server is fast enough to supply that much data within a
second or two. For MP3 live streams however, it takes 1 minute to download 1
minute of audio, so without this change, app_mp3 wasn't really usable for MP3
live streams.
This commit changes the buffer size so that it covers 6 seconds of an MP3 file
streamed from a server and 0.5 seconds of an MP3 live stream. The latter is
identified by the use of a .m3u file extension.
app_mp3 so far only supported 8 kHz audio.
Now it always runs at the sample rate of the channel.
ASTERISK-26085 #close
Change-Id: Id1ee274733cd804a0edecf7450329b72f1235af0
|
|
If the PJSIP endpoint's AOR with the permanent contact
was deleted from the realtime storage the res_pjsip module
continues trying to qualify this contact.
The error 'Unable to find an endpoint to qualify contact'
appeares every 'qualify_frequency' seconds.
This patch deletes this contact in this case.
The PJSIP endpoint's AOR with the permanent contact
is never qualified if it is added to realtime storage
after asterisk started.
This patch adds qualifying for the AOR's permanent contacts
on the first handling of this AOR.
ASTERISK-26319 #close
Change-Id: Ib93dded9121edb113076903d1aa95402f799f8fe
|
|
|
|
|
