Age | Commit message (Collapse) | Author |
|
Changed output packets queue processing algo to one read-one write
instead of all read-all send
Remove h.245 tunneling parameter from ReleaseComplete packet
ASTERISK-24400 #close
Reported by: Dmitry Melekhov
Tested by: Dmitry Melekhov
Change-Id: I0b31933b062a21011dbac9a82b8bcfe345f406f6
|
|
into 13
|
|
|
|
This reverts commit 93332cb1d0eea18021ea6538237297e627d6e2fc.
Unfortunately, the aforementioned commit caused a regression (incoming calls
would eventually disconnect). Thus it is being removed.
ASTERISK-26523 #close
ASTERISK-25270
Change-Id: Ibf5586adc303073a8eac667a4cbfdb6be184a64d
|
|
Fix logic on read second part of H.225 packet. There was infinite loop on
wrong connections due to read before poll.
Change-Id: I42b4bf75c46e4a5c5df5c5ca1f0bd74b8944e7ff
|
|
|
|
Added missing account to AMI event of sip show peers
ASTERISK-26176 #close
Change-Id: Ieb6c2c80a838a1b59c82103eba4c63ba238dc482
|
|
The dynamic range (96-127) allows 32 RTP Payload Types. RFC 3551 section 3
allows to reassign other ranges. Consequently, when the dynamic range is
exhausted, you can go for "rtp_pt_dynamic = 35" (or 0) in asterisk.conf. This
enables the range 35-63 (or 0-63) giving room for another 29 (or 64) payload
types.
ASTERISK-26311 #close
Change-Id: I7bc96ab764bc30098a178b841cbf7146f9d64964
(cherry picked from commit 9ac53877f688c06acaa7c377f15da8770e4ee88b)
|
|
Given the scenario where multiple channels are dialed using Dial()
but the caller is picked up using PickupChan() all outgoing channels
except the channel specified to PickupChan() would be marked
as ringing until the call had been hung up.
When using the PickupChan application the channel executing the
application is swapped into place of another channel. As part
of this process the channel is answered. The Dial application
has explicit logic which checks if the channel is answered,
cancels all other outgoing channels, and bridges. This logic is
different than the normal logic that is executed when an outgoing
channel is answered. This different logic failed to publish dial
events stating that the other outgoing channels had been canceled.
As a result references to the outgoing channels were held onto by
the dial masquerade process until the call had been ended and
the channels had gone away. This would result in the channels
appearing in the "core show channels" list despite not being present
anymore and would also result in incorrect device state.
This change makes it so that this logic also publishes
dial events stating that the other outgoing channels have been
canceled.
ASTERISK-26549
Change-Id: Iea7168e6e82f7d4609ec0366153804e4f55ea64f
|
|
|
|
|
|
|
|
|
|
|
|
|
|
codec_opus" into 13
|
|
PJPROJECT 2.5.5 introduced a race condition with the -r5349 IPv6 DNS
patch.
The patch below fixes a write to freed memory under cartain DNS lookup
conditions.
0006-r5477-svn-backport-Fix-DNS-write-on-freed-memory.patch
ASTERISK-26516
Reported by: Richard Mudgett
Change-Id: Ifdfae9ecf1e41b53080f33aab44ce1a220f349c5
|
|
|
|
The res_pjsip_sdp_rtp module did not restrict the number of
formats added to a media stream in the SDP to the defined
limit. If allow=all was used with additional loaded codecs this
could result in the next media stream being overwritten some.
This change restricts the module to limit it to the defined
maximum and also increases the maximum in our bundled pjproject.
ASTERISK-26541 #close
Change-Id: I0dc5f59d3891246cafa2f3df5ec406f088559ee8
|
|
ASTERISK-25070
Change-Id: I43bf94d2d36d3d8a8d0df40cd6c027d65a462814
|
|
PATH_MAX is not guaranteed to be defined. In parctice, all but the HURD
define it to a constant. It is indeed not safe to assume there won't be
longer paths and Asterisk generally does err safely on such cases.
So even for HURD we'll just pretend PATH_MAX is 4096.
ASTERISK-25070 #close
Change-Id: I53d10ba18c34c132bcb640a5fd8e0da1d9b22db3
|
|
codecs.conf.sample was missing codec opus's configuration options, descriptions,
and examples. This patch adds the configuration options and examples to
codecs.conf.sample that can be used with codec_opus.
ASTERISK-26538 #close
Change-Id: I1d89bb5e01d3e3b5bd78951b8dd0ff077a83dc8b
|
|
If in sip.conf (general section) set option register_retry_403=no,
the command "sip show settings" return value:
Outbound reg. retry 403:0
If in sip.conf (general section) set option register_retry_403=yes,
the command "sip show settings" return value:
Outbound reg. retry 403:-1
* In static char "sip show settings" for "Outbound.reg. retry 403"
option use AST_CLI_YESNO
ASTERISK-26476 #close
Change-Id: I3c14272f05f1067bd2aeaa8b3ef9cf8fcb12dcf9
|
|
This patch adds three new CLI commands:
- ari show apps: list the registered ARI applications
- ari show app: show detailed information about an ARI application
- ari set debug: dump events being sent to an ARI application
Note that while these CLI commands live in the res_stasis module, we use
the 'ari' family for these commands. This was done as most users of
Asterisk aren't aware of the semantic differences between ARI and
res_stasis, and some 'ari' CLI commands already exist.
ASTERISK-26488 #close
Change-Id: I51ad6ff0cabee0d69db06858c13f18b1c513c9f5
|
|
In order for pjsua and its python binding to actually negotiate
audio for the testsuite tests, it needs g711 and resample. The
pj* libraries themselves do not. Unfortunately, pjproject relies
on a brand new libresample that most distros don't ship so we need
to use the libresample already bundled with pjproject. Only the pjsua
executable and the _pjsua.so python library are linked with it so it
shouldn't interfere with asterisk itself.
Also it was pointed out that apply_patches couldn't handle multiple
patches that depended on each other during the dry-run, so the
dry-run was removed.
Change-Id: I24f397462b486dcdde0dcafe40e6c55a6593f098
|
|
The NewConnectedLine event has been added by commit fe7671f, but the
documentation was missing.
ASTERISK-26537 #close
Change-Id: I7fc331f18caa28492da9303e576f70884ca8c9e6
|
|
|
|
|
|
Headers declare that memcpy does not accept NULL argument for the first
two parameters. Add a conditional block to prevent memcpy and ast_free
from running on vectors with NULL element array.
ASTERISK-26526 #close
Change-Id: I988a476bb5fcfcbd3f6d6c6b3e7769e4f9629b71
|
|
Every ao2 object contains storage for a private variable data_size,
though the value is never read if AO2_DEBUG is disabled. This change
makes the variable conditional, reducing memory usage.
ASTERISK-26524 #close
Change-Id: If859929e507676ebc58b0f84247a4231e11da07f
|
|
main/Makefile includes third-party/pjproject/build.mak but
doesn't set PJDIR beforehand so "include $(PJDIR)/version.mak"
evaluates to "/version.mak". Fix is to set PJDIR in main/Makefile
before the include.
Change-Id: I0f7c67d60209049056fe9c4b041bf0463aa95604
|
|
|
|
PJPROJECT 2.5.5 introduced a race condition with the -r5349 IPv6 DNS
patch.
The patches below fix the DNS lookup race condition crash caused by
attempting to send the same message twice for the single DNS lookup.
0006-r5471-svn-backport-Various-fixes-for-DNS-IPv6.patch
0006-r5473-svn-backport-Fix-pending-query.patch
The patch below removes a cached DNS response from the hash table when
another thread is referencing the old entry. The table still contained
the entry when it was destroyed which can result in inexplicable crashes.
0006-r5475-svn-backport-Remove-DNS-cache-entry.patch
ASTERISK-26344 #close
Reported by: Ian Gilmour
ASTERISK-26387 #close
Reported by: Harley Peters
Change-Id: I17fde80359e66f65a91341ceca58d914d0f61cc4
|
|
Removing explicit transport definition for endpoints and registrations. It
isn't necessary and isn't generally advised.
ASTERISK-26514 #close
Change-Id: Ifdec5e631962438a4683600968dfa4bfd15909fb
|
|
|
|
It is only safe to run ast_register_cleanup callbacks when all modules
have been unloaded. Previously these callbacks were run during graceful
shutdown, making it possible to crash during shutdown.
ASTERISK-26513 #close
Change-Id: Ibfa635bb688d1227ec54aa211d90d6bd45052e21
|
|
into 13
|
|
calls." into 13
|
|
into 13
|
|
MAILBOX_EXISTS." into 13
|
|
Older versions of tar don't support the --strip-components option so
instead of doing 'tar --strip-components=1 -C source', we now just
untar to the tarball's root directory (pjproject-<version>) and
rename that directory to 'source'.
Also fixed an issue where the pjproject source directory is a hard
coded absolute pathname.
ASTERISK-26510 #close
ASTERISK-22480 #close
Change-Id: I9ec92952507a91ff4e4d01e0149e09fd8e8f32b0
|
|
The res_pjsip_caller_id module wrongly assumed that a
saved From header would always exist on sessions. This
is true until an inbound call is received and a session
timer causes an UPDATE to be sent. In this case there will
be no saved From header and a crash will occur. This change
makes it fall back to the From header of the outgoing request
if no saved From header is present.
ASTERISK-26307 #close
Change-Id: Iccc3bc8d243b5ede9b81abf960292930c908d4fa
|
|
|
|
|
|
When executing the MailboxExists dialplan application and
MAILBOX_EXISTS dialplan function the passed in temporary voice
mailbox was not cleared, causing it to try to free garbage.
ASTERISK-26503 #close
Change-Id: Ie21ccfa1b80b9c59318e596f6b8e17da2b5a7cb3
|
|
When channel format changes occurred as a result of an RTP
re-negotiation the bridge was not informed this had happened.
As a result the bridge technology was not re-evaluated and the
channel may have been in a bridge technology that was incompatible
with its formats. The bridge is now unbridged and the technology
re-evaluated when this occurs.
The chan_pjsip module also allowed asymmetric codecs for sending
and receiving. This did not work with all devices and caused one
way audio problems. The default has been changed to NOT do this
but to match the sending codec to the receiving codec. For users
who want asymmetric codecs an option has been added, asymmetric_rtp_codec,
which will return chan_pjsip to the previous behavior.
The codecs returned by the chan_pjsip module when queried by
the bridge_native_rtp module were also not reflective of the
actual negotiated codecs. The nativeformats are now returned as
they reflect the actual negotiated codecs.
ASTERISK-26423 #close
Change-Id: I6ec88c6e3912f52c334f1a26983ccb8f267020dc
|
|
When an explicit media_address is provided the address family
in the SDP needs to be set to reflect it.
ASTERISK-26309
Change-Id: Ib9350cc91c120eb2f96f0623d3907d12af67eb79
|
|
The test uses 4 threads to grow, count, lookup and shrink 15K objects
in a container. If there's only 1 execution engine available, the test
will complete in <50ms. If each threads gets its own execution engine,
the test may timeout after 60 seconds because the count thread does a
locked ao2_callback on the whole container in a tight loop with only
a sched_yield to give up time. The lock contention makes the test
execution times wildly variable and mostly timeout. 2 execution
engines are OK, 3 results in about 33% failure rate and >=4 causes
a 80% failure rate.
To fix, the sched_yield was changed to a usleep(500).
Also, the number of buckets specified for the container was an even
number so that was changed to the next prime number greater than
(MAX_HASH_ENTRIES / 100). That's 151 currently.
Change-Id: I50cd2344161ea61bfe4b96d2a29a6ccf88385c77
|
|
|
|
|