Age | Commit message (Collapse) | Author |
|
setup_park_common_datastore() was assuming that a non-NULL string returned
for the ATTENDEDTRANSFER and BLINDTRANSFER channel variables are not empty
strings. Things got crashy as a result.
* Made setup_park_common_datastore() treat the channel variable values the
same whether they are NULL or empty for ATTENDEDTRANSFER and
BLINDTRANSFER.
ASTERISK-25254 #close
Reported by: Richard Mudgett
Change-Id: I9a9c174b33f354f35f82cc6b7cea8303adbaf9c2
|
|
|
|
|
|
Last time I checked, it's "Sangoma", not "Samgoma". Thanks to Brian
(GameGamer43) for pointing that out.
Change-Id: I43d7b196f6d7a2b2517b84915e3a8dfbc2894106
|
|
Changed the unload mode to AST_FORCE_SOFT from AST_FORCE_FIRM,
which would unload a module even if it was in use.
* Changed unload mode to proper mode
ASTERISK-25173
Change-Id: If2402487b5bce05d9770f25f65f5c8e292ad5533
|
|
|
|
Having a debug message tell us that we attempted to look up an item but
failed is nice in circumstances when it isn't clear if the wizard was
queried correctly or not.
Change-Id: I2600c3bbea87f252196358f62e73f4c7da8632f7
|
|
Newlines are nice.
Change-Id: Icf0d915db02882e47cd9077ed9009f5d44140d42
|
|
This patch fixes some bad default value handling in the following
settings:
* The 'message_context' and 'accountcode' settings are not mandatory. As
such, we can allow their stringfield values to be empty.
* The 'media_encryption' setting applies a default value of 'none' to
the setting, which it then can't parse or understand. Since the value
is documented to be 'no', this will now apply that as the default
value.
Change-Id: Ib9be7f97a7a5b9bc7aee868edf5acf38774cff83
|
|
If a sorcery wizard does not support one of the 'optional' CRUD
operations (namely the CUD), log a WARNING message so we are aware of
why the operation failed. This also removes an assert in this case, as
the CUD operation may have been triggered by an external system, in
which case it is not a programming error but a configuration error.
Change-Id: Ifecd9df946d9deaa86235257b49c6e5e24423b53
|
|
The crash fix for ASTERISK-25183 backported some code from master to try
to make sure that a BYE response is processed by the same serializer used
by the BYE request. The identified race condition causing that backport
was the BYE request code had not finished processing after sending the BYE
before the BYE response came in for processing under a different thread.
Unfortunately, there is still a race condition. Now the race condition is
between destroying the call session's serializer in
ast_taskprocessor_unreference() and using ast_taskprocessor_get() to get a
reference to the serializer for a BYE response. Even worse, the new race
condition is a design limitation of the taskprocessor implementation that
didn't matter in versions before v12. Back then, taskprocessors were only
destroyed when a module unloaded. Now res_pjsip can destroy them when a
call ends.
However, as noted on the ASTERISK-25183 commit,
session_inv_on_state_changed() is disassociating the dialog from the
session when the invite dialog state becomes PJSIP_INV_STATE_DISCONNECTED.
This is a tad too soon because our BYE request transaction has not
completed yet.
* Split session_end() that is called by session_inv_on_state_changed() to
hold off session destruction until the BYE transaction timeout occurs or a
failed initial INVITE transaction timeout occurs in
session_inv_on_tsx_state_changed().
ASTERISK-25201 #close
Reported by: Matt Jordan
Change-Id: Iaf8dc8485fd8392a2a3ee4ad3b7f7f04a0dcc961
|
|
An http request can be sent to reload an Asterisk module. If the
module can not be reloaded or is not already loaded, an error
response will be returned.
The command "curl -v -u user:pass -X PUT 'http://localhost:8088
/ari/asterisk/modules/{moduleName}'" (or something similar, based
on configuration) can be run in the terminal to access this new
functionality.
For more information, see:
https://wiki.asterisk.org/wiki.display/~bford/Asterisk+ARI+Resource
* Added new ARI functionality
* Asterisk modules can be reloaded through http requests
ASTERISK-25173
Change-Id: I289188bcae182b2083bdbd9ebfffd50b62f58ae1
|
|
An http request can be sent to unload an Asterisk module. If the
module can not be unloaded or is already unloaded, an error response
will be returned.
The command "curl -v -u user:pass -X DELETE 'http://localhost:8088
/ari/asterisk/modules/{moduleName}'" (or something similar, depending
on configuration) can be run in the terminal to access this new
functionality.
For more information, see:
https://wiki.asterisk.org/wiki.display/~bford/Asterisk+ARI+Resource
* Added new ARI functionality
* Asterisk modules can be unloaded through http requests
ASTERISK-25173
Change-Id: I535a95f5676deb02651522761ecbdc0b00b5ac57
|
|
An http request can be sent to load an Asterisk module. If the
module can not be loaded or is loaded already, an error response
will be returned.
The command curl -v -u user:pass -X POST 'http://localhost:8088/ari
/asterisk/modules/{moduleName}'" (or something similar, depending on
configuration) can be run in the terminal to access this new
functionality.
For more information, see:
https://wiki.asterisk.org/wiki.display/~bford/Asterisk+ARI+Resource
* Added new ARI functionality
* Asterisk modules can be loaded through http requests
ASTERISK-25173
Change-Id: I9e05d5b8c5c666ecfef341504f9edc1aa84fda33
|
|
into 13
|
|
|
|
An http request can be sent to retrieve information on a single
module, including the resource name, description, use count, status,
and support level.
The command "curl -v -u user:pass -X GET 'http://localhost:8088/ari
/asterisk/modules/{moduleName}'" (or something similar, depending on
configuration) can be run in the terminal to access this new
functionality.
For more information, see:
https://wiki.asterisk.org/wiki.display/~bford/Asterisk+ARI+Resource
* Added new ARI functionality
* Information on a single module can now be retrieved
ASTERISK-25173
Change-Id: Ibce5a94e70ecdf4e90329cf0ba66c33a62d37463
|
|
During an attended transfer a thread is started that handles imparting the
bridge channel. From the start of the thread to when the bridge channel is
ready exists a gap that can potentially cause problems (for instance, the
channel being swapped is hung up before the replacement channel enters the
bridge thus stopping the transfer). This patch adds a condition that waits
for the impart thread to get to a point of acceptable readiness before
allowing the initiating thread to continue.
ASTERISK-24782
Reported by: John Bigelow
Change-Id: I08fe33a2560da924e676df55b181e46fca604577
|
|
ast_format_cap_get_names" into 13
|
|
Some individual fields may fail their conversion due to their default
values being invalid for their custom handlers. In particular,
configuration values that depend on others being enabled (and thus have
an empty default value) are notorious for tripping this routine up. An
example of this are any of the DTLS options for endpoints. Any of the
DTLS options will fail to be applied (as DTLS is not enabled), causing
the entire object set to be aborted.
This patch makes it so that we log a debug message when skipping a
field, and rumble on anyway.
ASTERISK-25238
Change-Id: I0bea13de79f66bf9f9ae6ece0e94a2dc1c026a76
|
|
We have a strange relationship between the parsing of format
capabilities from a string and their representation as a string. We
expect the format capabilities to be expressed as a string in the
following format:
allow = !all,ulaw,alaw
disallow = g722
While we would generate the string representation of those formats as:
allow = (ulaw|alaw)
disallow = (ulaw|alaw|g729...)
When the configuration framework needs to store values as a string, it
generates the format capabilities using the second representation; this
representation however cannot be parsed when the entry is rehydrated.
This patch fixes that by updating
ast_format_cap_update_by_allow_disallow to parse an entry as if it were
in the generated format if it has a leading '(' and a trailing ')'.
ASTERISK-25238
Change-Id: I904d43caf4cf45af06f6aee0c9e58556eb91d6ca
|
|
API" into 13
|
|
|
|
into 13
|
|
This patch adds more tests that exercise the device state API. This includes:
* Tests that cover adding a device state provider, as well as deleting a
device state provider. This also verifies that you cannot add an
already added device state provider, and cannot delete an already
deleted device state provider.
* A test that covers changing device state and receiving said updates
from a device state subscriber. This also covers hitting both the
device state cache as well as a custom device state provider.
* A test that covers converting device state to channel state and device
state values to a string representation and back.
* A test that covers obtaining device state from an active channel and a
channel driver that provides its own device state.
Change-Id: I2adca67ffb405cd8625a5d6df1e3f9b3d945c08d
|
|
Currently, the device state provider API will allow you to register a
device state provider with the same case insensitive name more than
once. This could cause strange issues, as the duplicate device state
providers will not be queried when a device's state has to be polled.
This patch updates the API such that a device state provider with the
same name as one that has already registered will be rejected.
Change-Id: I4a418a12280b7b6e4960bd44f302e27cd036ceb2
|
|
Again, tests now need to not end with a newline. This patch makes it so
the tests can register again, unit tests will actually pass, and we can
stop wasting time trying to figure out why builds are failing when they
really aren't failing.
Change-Id: Ide519fbeba89f413c733446c5ff7b224fc4ce840
|
|
|
|
Because unit tests now want descriptions to not end with a newline, the
sorcery memory cache thrash tests failed to register. This patch
corrects their descriptions.
Change-Id: Id004b1becfdeed8ee3c846f49beab76a5c0f68b6
|
|
An http request can be sent to retrieve a list of all existing modules,
including the resource name, description, use count, status, and
support level.
The command "curl -v -u user:pass -X GET 'http://localhost:8088/ari/
asterisk/modules" (or something similar, depending on configuration)
can be run in the terminal to access this new functionality.
For more information, see:
https://wiki.asterisk.org/wiki.display/~bford/Asterisk+ARI+Resource
* Added new ARI functionality
* Information on modules can now be retrieved
Change-Id: I63cbbf0ec0c3544cc45ed2a588dceabe91c5e0b0
|
|
transfer." into 13
|
|
The bridge_native_rtp module adds a frame hook to channels which are in
a native RTP bridge. This frame hook is used to intercept when a hold
or unhold frame traverses the bridge so native RTP can be stopped or
started as appropriate. This is expected but exposes a specific bug
when attended transfers are involved.
Upon completion of an attended transfer an unhold frame is queued up
to take one of the channels involved off hold. After this is done
the channel is moved between bridges.
When the frame hook is involved in this case for the unhold it
releases the channel lock and acquires the bridge lock. This
allows the bridge core to step in and move the channel
(potentially changing the bridging techology) from another thread.
Once completed the bridge lock is released by the bridge core.
The frame hook is then able to acquire the bridge lock and
wrongfully starts native RTP again, despite the channel no longer
being in the bridge or needing to start native RTP. In fact at
this point the frame hook is no longer attached to the channel.
This change makes it so the native RTP bridge data is available to
the frame hook when it is invoked. Whether the frame hook has
been detached or not is stored on the native RTP bridge data and
is checked by the frame hook before starting or stopping native
RTP bridging. If the frame hook has been detached it does nothing.
ASTERISK-25240 #close
Change-Id: I13a73186a05f4e5a764f81e5cd0ccec1ed1891d2
|
|
Gerrit is complaining of conflicts when trying to create a patch series
of all of the cherry-picked master commits, so I have instead squashed
it all into one commit.
ASTERISK-25067 #close
Reported by: Matt Jordan
Change-Id: I6dda90343fae24a75dc5beec84980024e8d61eb9
|
|
This change fixes a bug where the DTLS timeout timer would be
initialized to 0 if DTLS was not used for an RTP session.
ASTERISK-25103
Change-Id: If8d26bb054f1d300838850da5b8db9044c2fe2ac
|
|
mwi_subscription_mailboxes_str()." into 13
|
|
|
|
into 13
|
|
* changes:
res_pjsip_mwi.c: Eliminate a simple RAII_VAR.
res_pjsip_mwi.c: Fix mid-line log message line breaks.
|
|
dereferences." into 13
|
|
|
|
transaction." into 13
|
|
|
|
This change moves logic for setting up the DTLS SSL contexts to
when the SDP is done being processed instead of when ICE negotiation
completes. It also stops handshakes from being initiated when we
are acting as a server.
Manipulating the SSL context when ICE negotiation has completed
is problematic as the SSL context is not protected and if acting
as a client the remote side may have started DTLS negotiation
already.
The retransmission timeout timer code has also been split up
and simplified some. Both RTP and RTCP now have their own timers
and the points at which the timer is stopped and started is now
more specific. When a packet is sent the timer is started. When
a response is received but before it is processed the timer is
stopped. This provides a guarantee that the timeout is not
occurring while the response is processed.
ASTERISK-22805 #close
ASTERISK-24550 #close
ASTERISK-24651 #close
ASTERISK-24832 #close
ASTERISK-25103 #close
ASTERISK-25127 #close
Change-Id: Ib75ea2546f29d6efc3d2d37c58df6986c7bd9b91
|
|
Calling t38_change_state() sets the t38 state so it makes little sense to
then check the state right after the call for something else.
* Made the code in t38_interpret_parameters() reject or exit T.38 mode as
intended but not implemented.
Change-Id: Ib281263a6ed44da9448132c4e6df1e183b8a3df2
|
|
Change-Id: I6f39d809a6d1b47b35bb32b298f5a12f35d6f907
|
|
Change-Id: Ib1843f81e826a6c760c424c88eb70c350d9d61da
|
|
* Add create_mwi_subscriptions_for_endpoint() doxygen comment.
Change-Id: I3c3f921f4ec749fb65b62d2f6fa0d4d1888b94e2
|
|
MWI subscriptions can crash or corrupt memory when using the subscription
datastore to access the MWI subscription object because the datastore is
not holding a reference to the object.
* Give the subscription datastore a ref to the MWI subscription object.
It is unfortunate that the ref causes a circular ref chain that must be
explicitly broken to allow the memory to get released. The loop is broken
when the subscription is shutdown and if the subscription setup fails.
ASTERISK-25168 #close
Reported by: Carl Fortin
Change-Id: Ice4fa823f138ff10a6c74d280699c41a82836d4f
|
|
When res_pjsip body generator modules were generating XML or XPIDF
response bodies, there was a chance that the generated body would be the
exact size of the supplied buffer. Adding the nul string terminator would
then write beyond the end of the buffer and potentially corrupt memory.
* Fix MALLOC_DEBUG high fence violations caused by adding a nul string
terminator on the end of a buffer for XML or XPIDF response bodies.
* Made calls to pj_xml_print() safer if the XML prolog is requested. Due
to a bug in pjproject, the return value could be -1 _or_
AST_PJSIP_XML_PROLOG_LEN if the supplied buffer is not large enough.
* Updated the doxygen comment of AST_PJSIP_XML_PROLOG_LEN to describe the
return value of pj_xml_print() when the supplied buffer is not large
enough.
ASTERISK-25168
Reported by: Carl Fortin
Change-Id: Id70e1d373a6a2b2bd9e678b5cbc5e55b308981de
|
|
When a caller calls a FAX number and then hangs up right after the call is
answered then the T.38 re-INVITE automatic reject timer may still be
running after the channel goes away.
* Added session NULL channel checks on the code paths that get executed by
t38_automatic_reject() to prevent a crash when the T.38 re-INVITE
automatic reject timer expires.
ASTERISK-25168
Reported by: Carl Fortin
Change-Id: I07b6cd23815aedce5044f8f32543779e2f7a2403
|