| Age | Commit message (Collapse) | Author |
|---|
|
|
|
During some transfer scenarios involving queues Asterisk would sometimes
crash when trying to obtain a channel snapshot (could happen on caller or
member channels). This occurred because the underlying channel had already
disappeared when trying to obtain the latest snapshot.
This patch adds a reference to both the member and caller channels that
extends to the lifetime of the queue'd call, thus making sure the channels
will always exist when retrieving the latest snapshots.
ASTERISK-25185 #close
Reported by: Etienne Lessard
Change-Id: Ic397fa68fb4ff35fbc378e745da9246a7b552128
|
|
There is a slim chance of a race condition occurring where two threads
can both attempt to manipulate the same area.
Thread A can be handling an incoming initial SUBSCRIBE request. Thread A
lets the specific subscription handler know that the subscription has
been established.
At this point, Thread B may detect a state change on the subscribed
resource and queue up a notification task on Thread C, the subscription
serializer thread.
Now Thread A attempts to generate the initial NOTIFY request to send to
the subscriber at the same time that Thread C attempts to generate a
state change NOTIFY request to send to the subscriber.
The result is that Threads A and C can step on the same memory area,
resulting in a crash. The crash has been observed as happening when
attempting to allocate more space to hold the body for the NOTIFY.
The solution presented here is to queue the subscription establishment
and initial NOTIFY generation onto the subscription serializer thread
(Thread C in the above scenario). This way, there is no way that a state
change notification can occur before the initial NOTIFY is sent, and if
there is a quick succession of NOTIFYs, we can guarantee that the two
NOTIFY requests will be sent in succession.
Change-Id: I5a89a77b5f2717928c54d6efb9955e5f6f5cf815
|
|
When Asterisk translates between codecs, each with a different frame size (for
example between iLBC 30 and Speex-WB), too large frames were created by
ast_trans_frameout. Now, ast_trans_frameout is called with the correct frame
length, creating several frames when necessary. Affects all transcoding modules
which used ast_trans_frameout: GSM, iLBC, LPC10, and Speex.
ASTERISK-25353 #close
Change-Id: I2e229569d73191d66a4e43fef35432db24000212
|
|
It has been observed that on long-running busy systems, a scheduler
context can eventually hit INT_MAX for its assigned IDs and end up
overflowing into a very low negative number. When this occurs, this can
result in odd behaviors, because a negative return is interpreted by
callers as being a failure. However, the item actually was successfully
scheduled. The result may be that a freed item remains in the scheduler,
resulting in a crash at some point in the future.
The scheduler can overflow because every time that an item is added to
the scheduler, a counter is bumped and that counter's current value is
assigned as the new item's ID.
This patch introduces a new method for assigning scheduler IDs. Instead
of assigning from a counter, a queue of available IDs is maintained.
When assigning a new ID, an ID is pulled from the queue. When a
scheduler item is released, its ID is pushed back onto the queue. This
way, IDs may be reused when they become available, and the growth of ID
numbers is directly related to concurrent activity within a scheduler
context rather than the uptime of the system.
Change-Id: I532708eef8f669d823457d7fefdad9a6078b99b2
|
|
Record-Route" into 13
|
|
Change validation on reload module because now used the cli function for
reload. The sip_reload() function never fail and ever return NULL for this
reason on reload() now use the call the sip_reload() and return
AST_MODULE_LOAD_SUCCESS.
This problem is dectected on reload by PUT method on ARI, getting always
404 http code when the module is reloaded.
ASTERISK-25325 #close
Reporte by: Rodrigo Ramírez Norambuena
Change-Id: I41215877fb2cfc589e0d4d464000cf6825f4d7fb
|
|
Change-Id: I2b8db18eac36c01a5c7eb9467699124e203fd093
|
|
Change-Id: Ie62ff1f4b7adc1a12fa0303f53926af249b25e20
|
|
We should not try to send a SIP response message because we may be
restoring a persistent subscription where we are not responding to a SIP
request.
Change-Id: Id89167ef90320c5563f37e632db0dda6cb9e7dec
|
|
Fix off-nominal visited vector leak in build_resource_tree().
Change-Id: If0399c7941c9c0b1038bcfb7b9a371760977831c
|
|
ast_sip_pubsub_register_body_generator() did not account for the null
terminator set by sprintf() in the allocated output buffer.
Change-Id: I388688a132e479bca6ad1c19275eae0070969ae2
|
|
Change-Id: Ia396096b4fedc2874649ca11137612c3f55e83e3
|
|
Change-Id: I15debd0f717f16ee2f78e7f56151c3b3b97b72fc
|
|
Change-Id: I364906d6d2bad3472929986704a0286b9a2cbe3f
|
|
The default_from_user retrieval function was pulling the
default_from_user from the global configuration struct in an unsafe way.
If using a database as a backend configuration store, the global
configuration struct is short-lived, so grabbing a pointer from it
results in referencing freed memory.
The fix here is to copy the default_from_user value out of the global
configuration struct.
Thanks go to John Hardin for discovering this problem and proposing the
patch on which this fix is based.
ASTERISK-25390 #close
Reported by Mark Michelson
Change-Id: I6b96067a495c1259da768f4012d44e03e7c6148c
|
|
We will only rewrite the Contact header if there is no Record-Route header in
the received request. If a malfunctioning proxy places a Record-Route header
into a REGISTER request, we will decide that we shouldn't update the IP/port
in the Contact header, and we will end up storing a contact with an AoR that
contains the NAT'd IP address.
While it is nice to have the proxy *not* send a Record-Route in a REGISTER
request, it's also a good idea to not process the header in a non-dialog
message. This patch updates the code to explicitly ignore the Record-Route
header in REGISTER requests.
ASTERISK-25387 #close
Change-Id: I4bd3bcccc4003d460cc354d986b0dea2e433ef3f
|
|
|
|
Asterisk can load and register an object type while still having an invalid
sorcery mapping. This can cause an issue when a creation call is invoked.
For example, mis-configuring PJSIP's endpoint identifier by IP address mapping
in sorcery.conf will cause the sorcery mechanism to be invalidated; however, a
subsequent ARI invocation to create the object will cause a crash, as the
internal type may not be registered as sorcery expects.
Merely checking for a NULL pointer here solves the issue.
Change-Id: I54079fb94a1440992f4735a9a1bbf1abb1c601ac
|
|
|
|
Add ProgressIndicator IE with inband info present to Progress and
Alerting Q.931 message
ASTERISK-25227 #close
Reported by: Alexandr Dranchuk
Change-Id: I326ad13cb1db9a72b3fd902bafed3c28a3684203
|
|
Make certain that the pjsip session has not failed to
allocate the format capabilities structure, which can
otherwise cause a crash when referenced.
ASTERISK-25323
Change-Id: I602790ba12714741165e441cc64a3ecde4cb5750
|
|
URI." into 13
|
|
In Asterisk 11, the announcer channel would receive channel variables
from the channel being parked by means of normal channel inheritance.
This functionality was lost during the big res_parking project in
Asterisk 12. This patch restores that functionality.
ASTERISK-25369 #close
Review: https://gerrit.asterisk.org/#/c/1180/
Change-Id: Ie47e618330114ad2ea91e2edcef1cb6f341eed6e
|
|
|
|
In working through a recent ICE negotiation bug, I found the debug
logging in res_rtp_asterisk to be lacking. This patch adds a number of
debug and warning statements that were helpful.
Change-Id: I950c6d8f13a41f14b3d6334b4cafe7d4e997be80
|
|
pthread_attr_init() defaults to PTHREAD_EXPLICIT_SCHED on FreeBSD
too.
ASTERISK-25310 #close
Reported by: Guido Falsi
Change-Id: Iae6befac9028b5b9795f86986a4a08a1ae6ab7c4
|
|
|
|
In the wild it is possible for Contact URIs to be quite long as
parameters can exist on them. This can present a problem when storing
them in the AstDB as the URI is used as part of the object name and
there is a fixed length limit for the AstDB. This will cause
the contact to not get stored.
This change uses the MD5 hash of the Contact URI as part of the
object name instead. This has a fixed length which is guaranteed
to not exceed the AstDB length limit.
ASTERISK-25295 #close
Change-Id: Ie8252a75331ca00b41b9f308f42cc1fbdf701a02
|
|
Call ast_rtp_instance_stop on ooh323_destroy to free resources
allocated by rtp instance
ASTERISK-25299 #close
Report by: Alexandr Dranchuk
Change-Id: I455096bd7da016b871afe90af86067c2c7c9f33f
|
|
When an AoR is deleted by an external mechanism, such as through ARI, we
currently do not remove dynamic contacts that were created for that AoR as a
result of a received REGISTER request. As a result, re-creating the AoR will
cause the dynamic contact to be interpreted as a persistent contact, leading
to some rather strange state being created for the contacts/endpoints.
This patch adds a sorcery observer for the 'aor' object. When a delete is
issued on the underlying sorcery object, the observer is called, and all
contacts created and persisted in sorcery for that AoR are also removed. Note
that we don't want to perform this action when an AO2 object that is an AoR is
destroyed, as the AoR can still exist in the backing storage (and we would
thus be removing valid contacts from an AoR that still "exists".)
ASTERISK-25381 #close
Change-Id: I6697e51ef6b2858b5d63401f35dc378bb0f90328
|
|
|
|
SIP call-id" into 13
|
|
|
|
|
|
This patch adds a new option to the CHANNEL function that allows for the
extraction of the SIP call-id. It is used in conjunction with the 'pjsip'
option, and will return the Call-ID of the INVITE request that established
the PJSIP channel.
ASTERISK-25352
Change-Id: I278d1f8bcfe3a53c5aa1dadebc14e92b0abd476a
|
|
We were passing the wrong count into pj_ice_sess_create_check_list(),
causing the create to fail if we ever received more than PJ_ICE_MAX_CAND
candidates.
Change-Id: I0303d8e1ecb20a8de9fe629a3209d216c4028378
|
|
When Asterisk sends an outbound SIP request, if there is no direct
reason to place a specific value for the username in the From header,
Asterisk would generate a UUID. For example, this would happen when
sending outbound OPTIONS requests when qualifying or when sending
outbound INVITE requests when originating (if no explicit caller ID were
provided). The issue is that some SIP providers reject these sorts of
requests with a "Name too long" error response.
This patch aims to fix this by changing the default outbound username in
From headers to "asterisk". This value can be overridden by changing the
default_from_user option in the global options if desired.
ASTERISK-25377 #close
Reported by Mark Michelson
Change-Id: I6a4d34a56ff73ff4f661b0075aeba5461b7f3190
|
|
In ast_endpoint_snapshot_create(), a failure to init the
string fields results in two attempts to ao2_cleanup the
same pointer. Removed RAII_VAR to eliminate problem.
ASTERISK-25375 #close
Reported by: Scott Griepentrog
Change-Id: If4d9dfb1bbe3836b623642ec690b6d49b25e8979
|
|
Pjsip is refusing to use unsecure transport with "sips" in url.
WSS should be considered as secure transport.
ASTERISK-24602 #comment Partially fixed by setting WSS as secure
Change-Id: Iddac406c6deba6240c41a603b8859dfefe1a5353
|
|
|
|
When sending a stateful response, creation of the transaction can fail,
most commonly because we are trying to create a transaction from a
retransmitted request. When creation of the transaction fails, we end up
leaking a reference to a contact that was bumped when the response was
created.
This patch adds the missing deref and fixes the reference leak.
Change-Id: I2f97ad512aeb1b17e87ca29ae0abacb4d6395f07
|
|
When issuing the "core show hints" CLI command a combination of both
the hint extension and context is created. This uses a fixed size
buffer expecting that the extension will not exceed maximum extension
length. When the extension is actually a pattern match this constraint
does not hold true, and the extension may exceed the maximum extension
length. In this case extra characters are written past the end of the
fixed size buffer.
This change makes it so the construction of the combined hint extension
and context can not exceed the size of the buffer.
ASTERISK-25367 #close
Change-Id: Idfa1b95d0d4dc38e675be7c1de8900b3f981f499
|
|
A recent change to res_pjsip_pubsub switched to using pjsip_msg_print as
a means of writing an appropriate packet to persistent storage. While
this partially solved the issue, it had its own problems.
pjsip_msg_print will always add a Content-Length header to the message
it prints. Frequent restarts of Asterisk can result in persistent
subscriptions being written with five or more Content-Length headers. In
addition, sometimes some apparent corruption of individual headers could
be seen.
This aims to fix the problem by not running a parsed message through an
interpreter but rather by taking the raw message and saving it. The
logic for what to save is going to be different depending on whether a
SUBSCRIBE was received from the wire or if it was pulled from
persistence. When receiving a packet from the wire, when using a
streaming transport, the rdata->pkt_info.packet may contain multiple SIP
messages or fragments. However, the rdata->msg_info.msg_buf will always
contain the current SIP message to be processed. When pulling from
persistence, though, the rdata->msg_info.msg_buf will be NULL since no
transport actually handled the packet. However, since we know that we
will always ever pull one SIP message from persistence, we are free to
save directly from rdata->pkt_info.packet instead.
ASTERISK-25365 #close
Reported by Mark Michelson
Change-Id: I33153b10d0b4dc8e3801aaaee2f48173b867855b
|
|
|
|
A deadlock was observed where three threads were competing for different
locks:
* One thread held the hints lock and was attempting to lock a specific
hint.
* One thread was holding the specific hint's lock and was attempting to
lock the contexts lock
* One thread was holding the contexts lock and attempting to lock the
hints lock.
Clearly the second thread was doing the wrong thing here. The fix for
this is to make sure that the hint's lock is not held on presence state
changes. Something similar is already done (and commented about) for
device state changes.
ASTERISK-25362 #close
Reported by Mark Michelson
Change-Id: I15ec2416b92978a4c0c08273b2d46cb21aff97e2
|
|
into 13
|
|
|
|
When unreferencing a taskprocessor its reference count is checked
to determine if it should be unlinked from the taskprocessors
container and its listener shut down. In between the time when the
reference count is checked and unlinking it is possible for
another thread to jump in, find it, and get a reference to it. If
the thread then uses the taskprocessor it may find that it is not
in the state it expects.
This change locks the taskprocessors container during almost the
entire unreference operation to ensure that any other thread which
may attempt to find the taskprocessor has to wait.
ASTERISK-25295
Change-Id: Icb842db82fe1cf238da55df92e95938a4419377c
|
|
The keepalive support in res_pjsip_sdp_rtp currently assumes
that a stream will only be negotiated once. This is false.
If the stream is replaced and later added back it can be
negotiated again causing multiple keepalive scheduled items
to exist. This change explicitly deletes the existing
keepalive scheduled item before adding the new one.
The res_pjsip_sdp_rtp module also does not stop RTP
keepalives or timeout timer if the stream has been
replaced. This change adds a callback to the session media
interface to allow a media stream to be stopped without
the resources being destroyed. This allows the scheduled
items and RTP to be stopped when the stream no longer
exists.
ASTERISK-25356 #close
Change-Id: Ibe6a7cc0927c87326fd5f1c0d4ad889dbfbea1de
|
