| Age | Commit message (Collapse) | Author |
|---|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r266142 | tilghman | 2010-05-26 16:11:44 -0500 (Wed, 26 May 2010) | 14 lines
Use sigaction for signals which should persist past the initial trigger, not signal.
If you call signal() in a Solaris signal handler, instead of just resetting
the signal handler, it causes the signal to refire, because the signal is not
marked as handled prior to the signal handler being called. This effectively
causes Solaris to immediately exceed the threadstack in recursive signal
handlers and crash.
(closes issue #17000)
Reported by: rmcgilvr
Patches:
20100526__issue17000.diff.txt uploaded by tilghman (license 14)
Tested by: rmcgilvr
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@266146 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This wouldn't cause any problems, but it's certainly not needed either.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@266098 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Thanks Kevin!
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@266094 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@266092 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This patch breaks up every part of the sip registry string during
config parsing and removes all parsing from transmit_register().
Thanks to Nick_Lewis for contributing this patch!
(closes issue #14331)
Reported by: Nick_Lewis
Patches:
chan_sip.c-domparse.patch uploaded by Nick Lewis (license 657)
chan_sip.c.patch uploaded by Nick Lewis (license 657)
chan_sip.c.domainparse3.patch uploaded by Nick Lewis (license 657)
chan_sip.c-domparse4.patch uploaded by Nick Lewis (license 657)
chan_sip.c-domparse5.patch uploaded by Nick Lewis (license 657)
nicklewispatch.diff uploaded by dvossel (license 671)
Tested by: Nick_Lewis, dvossel
Review: https://reviewboard.asterisk.org/r/628/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@266090 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
(closes issue #17339)
Reported by: one47
Patches:
sip_magic_pickup2 uploaded by one47 (license 23)
Tested by: one47, dvossel
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@266006 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
........
r266004 | mmichelson | 2010-05-26 13:21:10 -0500 (Wed, 26 May 2010) | 12 lines
Make AgentComplete message more consistent.
At times, the "Member" field was not specified during the event.
It's there now.
(closes issue #15638)
Reported by: elbriga
Patches:
patchAppQueueAgentComplete.diff uploaded by elbriga (license 482)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@266005 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r265910 | tilghman | 2010-05-26 11:21:00 -0500 (Wed, 26 May 2010) | 7 lines
Not finding rows in the DB does not rise to the level of a warning.
(closes issue #17062)
Reported by: drookie
Patches:
20100525__issue17062.diff.txt uploaded by tilghman (license 14)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@265923 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
(closes issue #17392)
Reported by: dps
Patches:
20100525__issue17392.diff.txt uploaded by tilghman (license 14)
Tested by: dps
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@265894 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@265844 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
(closes issue #17016)
Reported by: twilson
Patches:
17016.patch uploaded by mmichelson (license 60)
Tested by: devmod
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@265842 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This uses a modified version of pabelanger's patch that checks for NTLM support
instead, which was added in 0.29.0 which is what is required for
res_calendar_ews.
(closes issue #17391)
Reported by: loloski
Patches:
issue17391.patch.v2 uploaded by pabelanger (license 224)
Tested by: twilson
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@265793 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This ensures cross-platform compatibility, even among Linux distributions,
which don't always put headers in the same place.
(closes issue #17391)
Reported by: loloski
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@265747 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
The logic used in transmit_register to get the outboundproxy for a peer
was flawed since this value would be overridden shortly afterwards when
create_addr was called.
In addition, this also fixes some logic used when parsing users.conf so
that the peer name is placed in the internally-generated register string
so that an outboundproxy set in the Asterisk GUI will be used for outbound
REGISTERs.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@265698 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
........
r265613 | dvossel | 2010-05-25 12:11:40 -0500 (Tue, 25 May 2010) | 8 lines
fixes build issue with zaptel
(closes issue #17394)
Reported by: aragon
Patches:
half_buffer_fix.diff uploaded by dvossel (license 671)
Tested by: aragon
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@265614 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r265610 | mnicholson | 2010-05-25 11:48:19 -0500 (Tue, 25 May 2010) | 8 lines
Don't mark the cdr records of unanswered queue calls with "NOANSWER". This restores the behavior prior to r258670.
(closes issue #17334)
Reported by: jvandal
Patches:
queue-cdr-fixes1.diff uploaded by mnicholson (license 96)
Tested by: aragon, jvandal
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@265611 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
The handling of the control subclass AST_CONTROL_READ_ACTION frame leaked
connected line string memory in __ast_read().
Also in __ast_read() the frame type switch should not have had a case for
AST_CONTROL_READ_ACTION. AST_CONTROL_READ_ACTION is not a frame type.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@265608 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@265525 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@265467 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Patch supplied by reporter was modified to use autoservice and
prevent a potential channel ref leak but is otherwise as the
reporter uploaded it.
(closes issue #17182)
Reported by: rcasas
Patches:
app_senddtmf.c.patch_trunk uploaded by rcasas (license 641)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@265453 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
(closes issue #17109)
Reported by: under
Patches:
logstream.diff uploaded by under (license 914)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@265451 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
(closes issue #16021)
Reported by: Guggemand
Patches:
realtime-type-fix.patch uploaded by Guggemand (license 897)
(altered by me slightly to avoid ref leaks)
Tested by: Guggemand
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@265449 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@265367 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
The decoding of the replace_id did not need to be broken
up in this instance. This was brought to my attention
again because it caused a segfault when the from or to
tags were not present in the "Replaces" header.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@265366 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
It is possible to connect to the manager interface before all Asterisk modules
are loaded. To ensure that an application does not send AMI actions that might
require a module that has not yet loaded, the application can listen for the
FullyBooted manager event. It will be sent upon connection if all modules have
been loaded, or as soon as loading is complete. The event:
Event: FullyBooted
Privilege: system,all
Status: Fully Booted
Review: https://reviewboard.asterisk.org/r/639/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@265320 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This commit adds support for calendaring with Exchange Server 2007+ via
Exchange Web Services. Full write support and for querying attendees. Many
thanks to Jan Kaláb for the feature.
(closes issue #17022)
Reported by: pitel
Patches:
res_calendar_ews.c uploaded by pitel (license 1008)
Tested by: pitel, twilson
Review: https://reviewboard.asterisk.org/r/557/
Review: https://reviewboard.asterisk.org/r/668/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@265317 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
(closes issue #16837)
Reported by: jlpedrosa
Patches:
20100504__issue16837.diff.txt uploaded by tilghman (license 14)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@265316 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@265273 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@265227 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
__ast_channel_alloc_ap() has several points in the initialization of a new
channel structure where it could fail. Since the channel structure is now
an ao2 object, the destructor callback needs to be able to handle clean up
when the structure setup is incomplete.
Problems corrected:
1) Failing to setup the alertpipe would not unreference the structure but
free it directly. Doing this to an ao2_object is very bad.
2) File descriptors need to be initialized to -1 before a construction
failure could occur so the destructor will not close unopened descriptors.
3) The destructor needs to check that the string field has been
initialized before using any string field values. Crashes expected.
4) The destructor should not notify devstate if the device name is empty.
It is a waste of cycles and a couple ERROR log messages are generated.
Review: https://reviewboard.asterisk.org/r/675/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@265174 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r265089 | mmichelson | 2010-05-21 15:59:14 -0500 (Fri, 21 May 2010) | 8 lines
Don't hang up on a queue caller if the file we attempt to play does not exist.
This also fixes a documentation mistake in file.h that made my original attempt
to correct this problem not work correctly.
(closes issue #17061)
Reported by: RoadKill
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@265090 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
(closes issue #17157)
Reported by: stuarth
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@265087 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r264999 | mmichelson | 2010-05-21 11:53:53 -0500 (Fri, 21 May 2010) | 3 lines
Fix grammatical error in comment.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@265000 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r264996 | mmichelson | 2010-05-21 11:28:34 -0500 (Fri, 21 May 2010) | 32 lines
Allow ast_safe_sleep to defer specific frames until after the sleep has concluded.
From reviewboard
Background:
A Digium customer discovered a somewhat odd bug. The setup is that parties A
and B are bridged, and party A places party B on hold. While party B is
listening to hold music, he mashes a bunch of DTMF. Party A takes party
B off hold while this is happening, but party B continues to hear hold
music. I could reproduce this about 1 in 5 times.
The issue:
When DTMF features are enabled and a user presses keys, the channel that
the DTMF is streamed to is placed in an ast_safe_sleep for 100 ms, the
duration of the emulated tone. If an AST_CONTROL_UNHOLD frame is read
from the channel during the sleep, the frame is dropped. Thus the
unhold indication is never made to the channel that was originally placed
on hold.
The fix:
Originally, I discussed with Kevin possible ways of fixing the specific
problem reported. However, we determined that the same type of problem
could happen in other situations where ast_safe_sleep() is used. Using
autoservice as a model, I modified ast_safe_sleep_conditional() to
defer specific frame types so they can be re-queued once the sleep has
finished. I made a common function for determining if a frame should
be deferred so that there are not two identical switch blocks to
maintain.
Review: https://reviewboard.asterisk.org/r/674/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@264997 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Review: https://reviewboard.asterisk.org/r/658
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@264953 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
The same code was repeated in lots of different places, so I made a utility
fuction for it. This should make the merge in the v6-new branch easier.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@264905 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r264820 | rmudgett | 2010-05-20 18:23:21 -0500 (Thu, 20 May 2010) | 6 lines
ast_callerid_parse() had a path that left name uninitialized.
Several callers of ast_callerid_parse() do not initialize the name
parameter before calling thus there is the potential to use an
uninitialized pointer.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@264828 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
(closes issue #16623)
Reported by: tilghman
Patches:
20100116__issue16623.diff.txt uploaded by tilghman (license 14)
Tested by: lmadsen
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@264779 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
(closes issue #17356)
Reported by: kenner
Patches:
app_stack.c.diff uploaded by kenner (license 1040)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@264752 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@264711 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
The connected line update macro would not get run if the connected line
number string was empty. The number could be empty if the connected line
update did not update a number but the name. It should be run if there
was an AST_CONTROL_CONNECTED_LINE frame received for pending dials and
queues.
Renamed and added some more comments for some confusing identifiers
directly connected to the related code.
Also fixed a memory leak in app_queue.
Review: https://reviewboard.asterisk.org/r/669/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@264669 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
directmediapermit/directmediadeny support to restrict which peers can do
directmedia based on ip address. In some networks not all phones are fully
routed, i.e. not all phones can ping each other. This patch adds a way to
restrict directmedia for certain peers between certain networks.
(closes issue #16645)
Reported by: raarts
Patches:
directmediapermit.patch uploaded by raarts (license 937)
Tested by: raarts
Review: https://reviewboard.asterisk.org/r/467/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@264626 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
builds.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@264540 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Nick Lewis pointed out that the patch as committed wouldn't actually include
dynamic logger levels, which was missed by the other reviewers. Thanks!
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@264497 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
From reviewboard:
The problem here is a bit complex, so try to bear with me...
It was noticed by a Digium customer that generic PLC (as configured in
codecs.conf) did not appear to actually be having any sort of benefit when
packet loss was introduced on an RTP stream. I reproduced this issue myself
by streaming a file across an RTP stream and dropping approx. 5% of the
RTP packets. I saw no real difference between when PLC was enabled or disabled
when using wireshark to analyze the RTP streams.
After analyzing what was going on, it became clear that one of the problems
faced was that when running my tests, the translation paths were being set
up in such a way that PLC could not possibly work as expected. To illustrate,
if packets are lost on channel A's read stream, then we expect that PLC will
be applied to channel B's write stream. The problem is that generic PLC can
only be done when there is a translation path that moves from some codec to
SLINEAR. When I would run my tests, I found that every single time, read
and write translation paths would be set up on channel A instead of channel
B. There appeared to be no real way to predict which channel the translation
paths would be set up on.
This is where Kevin swooped in to let me know about the transcode_via_sln
option in asterisk.conf. It is supposed to work by placing a read translation
path on both channels from the channel's rawreadformat to SLINEAR. It also
will place a write translation path on both channels from SLINEAR to the
channel's rawwriteformat. Using this option allows one to predictably set up
translation paths on all channels. There are two problems with this, though.
First and foremost, the transcode_via_sln option did not appear to be working
properly when I was placing a SIP call between two endpoints which did not
share any common formats. Second, even if this option were to work, for PLC
to be applied, there had to be a write translation path that would go from
some format to SLINEAR. It would not work properly if the starting format
of translation was SLINEAR.
The one-line change presented in this review request in chan_sip.c fixed the
first issue for me. The problem was that in sip_request_call, the
jointcapability of the outbound channel was being set to the format passed to
sip_request_call. This is nativeformats of the inbound channel. Because of this,
when ast_channel_make_compatible was called by app_dial, both channels already
had compatibly read and write formats. Thus, no translation path was set up at
the time. My change is to set the jointcapability of the sip_pvt created during
sip_request_call to the intersection of the inbound channel's nativeformats and
the configured peer capability that we determined during the earlier call to
create_addr. Doing this got the translation paths set up as expected when using
transcode_via_sln.
The changes presented in channel.c fixed the second issue for me. First and
foremost, when Asterisk is started, we'll read codecs.conf to see the value of
the genericplc option. If this option is set, and ast_write is called for a
frame with no data, then we will attempt to fill in the missing samples for
the frame. The implementation uses a channel datastore for maintaining the
PLC state and for creating a buffer to store PLC samples in. Even when we
receive a frame with data, we'll call plc_rx so that the PLC state will have
knowledge of the previous voice frame, which it can use as a basis for when
it comes time to actually do a PLC fill-in.
So, reviewers, now I ask for your help. First off, there's the one line change
in chan_sip that I have put in. Is it right? By my logic it seems correct, but
I'm sure someone can tell me why it is not going to work. This is probably the
change I'm least concerned about, though. What concerns me much more is the
set of changes in channel.c. First off, am I even doing it right? When I run
tests, I can clearly see that when PLC is activated, I see a significant increase
in RTP traffic where I would expect it to be. However, in my humble opinion, the
audio sounds kind of crappy whenever the PLC fill-in is done. It sounds worse to
me than when no PLC is used at all. I need someone to review the logic I have used
to be sure that I'm not misusing anything. As far as I can see my pointer arithmetic
is correct, and my use of AST_FRIENDLY_OFFSET should be correct as well, but I'm
sure someone can point out somewhere where I've done something incorrectly.
As I was writing this review request up, I decided to give the code a test run under
valgrind, and I find that for some reason, calls to plc_rx are causing some invalid
reads. Apparently I'm reading past the end of a buffer somehow. I'll have to dig around
a bit to see why that is the case. If it's obvious to someone reviewing, speak up!
Finally, I have one other proposal that is not reflected in my code review. Since
without transcode_via_sln set, one cannot predict or control where a translation
path will be up, it seems to me that the current practice of using PLC only when
transcoding to SLINEAR is not useful. I recommend that once it has been determined
that the method used in this code review is correct and works as expected, then
the code in translate.c that invokes PLC should be removed.
Review: https://reviewboard.asterisk.org/r/622/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@264452 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
When decode_length returns the length there is a check to see if that
length is negative, if so the decode loop breaks as this means the
limit has been reached. The problem here is that length is an
unsigned int, so length can never be negative. This resulted in
an infinite loop.
(issue #17352)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@264400 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
(AST-377)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@264379 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r264334 | mnicholson | 2010-05-19 15:01:38 -0500 (Wed, 19 May 2010) | 5 lines
Set quieted flag when receiving a dtmf tone during playback in speechbackground.
(closes issue #16966)
Reported by: asackheim
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@264335 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
During deadlock avoidance the sip dialog pvt is locked and
unlocked. When this occurs we have no guarantee the pvt's owner
is still valid. We were trying to access the pvt's owner after
this without checking to see if it still existed first.
(closes issue #17271)
Reported by: under
Patches:
check_rtp_timeout.diff uploaded by under (license 914)
Tested by: dvossel
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@264331 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r264248 | tilghman | 2010-05-19 12:41:29 -0500 (Wed, 19 May 2010) | 17 lines
Internal timing is now on by default, if you're using DAHDI 2.3 or above.
The reason for ensuring DAHDI 2.3 or above is that this version ensures that
a timer is always available, whereas in previous versions, it was possible
for DAHDI to be loaded, but have no drivers to actually generate timing. If
internal_timing was turned on in this circumstance, a complete lack of audio
would result. This is the reason why internal_timing was not on by default.
However, now that DAHDI ensures the availability of a timer, there is no
reason for this setting to be off (and in fact, it solves a great many initial
user problems).
(closes issue #15932)
Reported by: dimas
Patches:
20100519__issue15932.diff.txt uploaded by tilghman (license 14)
Tested by: tilghman
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@264249 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
