| Age | Commit message (Collapse) | Author |
|---|
|
The latest Release candidate fails to create RTP streams when IPv6
is not available. Due to the changes made in September the ast_sockaddr
structure passed around to create these streams is always of AF_INET6
type, causing failure when used for IPv4. This patch adds a utility
function to check for availability of IPv6 and applies such check
at startup to determine how to create the ast_sockaddr structures.
ASTERISK-26617 #close
Change-Id: I627a4e91795e821111e1cda523f083a40d0e0c3e
|
|
into 14
|
|
|
|
The sending codec is switched to the receiving codec and then
is switched back to the best native codec on EVERY receiving RTP packets.
This is because after call of ast_channel_set_rawwriteformat there is call
of ast_set_write_format which calls set_format which sets rawwriteformat
to the best native format.
This patch adds a new function ast_set_write_format_path which set
specific write path on channel and uses this function to switch
the sending codec.
ASTERISK-26603 #close
Change-Id: I5b7d098f8b254ce8f45546e6c36e5d324737f71d
|
|
|
|
into 14
|
|
Tabs > Spaces.
Change-Id: If1e43a71822615a898e958e0f8b2e882606f0bd0
|
|
|
|
download_externals wasn't handling the "certified/13.x" version
correctly.
Change-Id: I124d195bb117ca36fd7bf1150c630f3b474a9d9a
|
|
There are quite a few odd GNU/Linux platforms. Just call all of them
linux-gnu.
Specifically this fixes building the Debian platforms mips64el and x32.
And maybe also others.
ASTERISK-26546 #close
Change-Id: I06ec4bd7f0ee1c84b6b24d81538223b07c4174b1
|
|
POSIX defines poll.h. sys/poll.h should not be used as it is c-library
internal header which may or may not exist. Notably in musl including
sys/poll.h generates warning of being incorrect.
Change-Id: Ib318c1c7142a737bcf3caa4d8d72560bebe39252
|
|
If a TCP/TLS connection was pending (not accepted and not timed out) during
unload of chan_sip, Asterisk would segfault when trying to send a signal to
a thread whose thread ID hadn't been recorded yet. This commit fixes that by
recording the thread ID before calling the blocking connect() syscall.
This was a regression introduced by 776a14386a55b5425c7e9617eff8af8b45427144.
The above wasn't enough to fix the segfault, which was now delayed to the
point where connect() timed out. Therefore, it was necessary to also remove
the SA_RESTART flag from the SIGURG sigaction so that pthread_kill() could be
used to interruput the connect() syscall.
This was a regression introduced by 5d313f51b982a18f7321adcf7c7a4e822d8b2714.
ASTERISK-26586 #close
Change-Id: I76fd9d47d56e4264e2629bce8ec15fecba673e7b
|
|
|
|
When retrieving RTCP stats for PJSIP channels, RTT values are unreliable.
RTT calculation is correct, but the data representation isn't. RTT is
represented by a 32-bit fixed-point number with the integer part in the
first 16 bits and the fractional part in the last 16 bits. In order to
get the RTT value, the fractional part is miscalculated, there is an
unnecessary 16 bit shift that causes overflow. Besides this there is
another mistake, when transforming the integer value to the fixed point
fractional part via bitwise operation, that loses precision.
* RTT fractional part is no longer shifted, avoiding overflow.
* RTT fractional part is transformed to its fixed-point value more
precisely.
* Fixed timeval2ntp() and ntp2timeval() second fraction conversions.
* Fixed NTP timestamp report logging. The usec was inexplicably
multiplied by 4096.
ASTERISK-26566 #close
Reported by Hector Royo Concepcion
Change-Id: Ie09bdabfee75afb3f1b8ddfd963e5219ada3b96f
|
|
into 14
|
|
The two reasons why it might be used are that some systems do not
implement strerror in thread safe manner, and that strerror_r returns
the error code in the string in case there's no error message.
However, all of asterisk elsewhere uses strerror() and assumes it
to be thread safe. And in chan_mobile the errno is also explicitly
printed so neither of the above reasons are valid.
The reasoning to remove usage is that there are actually two versions
of strerror_r: XSI and GNU. They are incompatible in their return
value, and there's no easy way to figure out which one is being
used. glibc gives you the GNU version if _GNU_SOURCE is defined,
but the same feature test macro is needed for other symbols. On
all other systems you assumedly get XSI symbol, and compilation warnings
as well as non-working error printing.
Thus the easiest solution is to just remove strerror_r and use
strerror as rest of the code. Alternative is to introduce ast_strerror
in separate translation unit so it can request the XSI symbol in
glibc case, and replace all usage of strerror.
Change-Id: I84d35225b5642d85d48bc35fdf399afbae28a91d
|
|
libasteriskpj was hard coded to use -lrt but librt is linux specific
so we now use the LIB_RT variable which gets set by configure.
Change-Id: I41148884517e3031f7675a413d524c86e8614694
|
|
|
|
Fix support of OS's like openBSD that use an older nameser.h,
this change reverts the defines to the older style which on other
systems is found in nameser_compat.h
Tested on openBSD 6.0, Debian 8
ASTERISK-26608 #close
Change-Id: Iffb36caab8c5aa9dece0ce2d009041f7b56cc86a
|
|
|
|
|
|
In order to not have version number overlap between different versions
of Asterisk, each new major version of Asterisk will mean we also bump
the ARI major version number.
This particular change does NOT introduce any known breaking changes to
ARI.
For discussion relating to this topice, see:
http://lists.digium.com/pipermail/asterisk-dev/2016-November/075964.html
Change-Id: I712ee0df177a8fe1252da2bc029705268b97b665
|
|
|
|
The download process now has a timeout which will cause wget to retry
if it stops retrieving data for 5 seconds and fetch and curl to timeout
if the whole retrieval take smore than 30 seconds.
If the tarball retrieval works, the MD5SUM file is retrieved from
the downloads site and the md5 checksum is verified.
If either the tarball retrieval or MD5SUM retrieval fails, or the
checksums don't match, the entire process is retried once. If it
fails again, any incomplete tarball is deleted.
.DELETE_ON_ERROR: was also added to the Makefile. Not only does
this delete the tarball on failure, it till also delete corrupted
library files from the pjproject source directory should they
fail to build correctly.
Tested all the way back to FreeBSD 9, CentOS 6, Debian 6 and
Ubuntu 14.
Change-Id: Iea7d33b96a31622ab1b6e54baebaf271959514e1
|
|
ASTERISK-26562 #close
Change-Id: Ie6cb0ffc2b8c775639ce7784fe96f4ea00cfa2f8
|
|
Based on bridge video AMI event changes, bump the minor version of AMI.
Change-Id: Idf84507354170400813cda780906c94c9f1b60b4
|
|
|
|
|
|
OpenBSD's 'find' doesn't take the -delete argument so you have to pipe
through 'xargs rm -rf'.
'echo -e' doesn't like \t starting a line. It just prints 't' which
causes the libasteriskpj.exports file to be garbage. They were just
cosmetic so they were removed.
librt doesn't exist so the link of libasteriskpj.so fails. It's not
actually needed for linux anyway so -lrt was removed from the link.
res_rtp_asterisk was failing to load because of an undefined
DTLS_method. '|| defined(LIBRESSL_VERSION_NUMBER)' was added to the #if
so DTLSv1_method is used instead.
ASTERISK-26608
Change-Id: I926ec95b0b69633231e3ad1d6e803b977272c49c
|
|
loaded." into 14
|
|
This reverts commit 7155020c96ecd9b843d9e4073c6c0854e73641e2.
Change-Id: I4e1681d2ca8bf36eda849f129bc0dcbc39ef5bc6
|
|
This reverts commit 8b9996a90c5a81ac104a371ccb8cf89a33c65c75.
Change-Id: Ibb2fccfc37188dc54f3776c2d5b41cc425d5cd9c
|
|
This reverts commit 97679ee846893823cdbfd95d91cecc3c14048601.
Change-Id: Ib68f76e75882c0230378c4fed97964988e690f3c
|
|
|
|
|
|
into 14
|
|
|
|
source" into 14
|
|
res_format_attr_opus assumed that the string being passed into it was
empty. It tried to determine if the only thing it had written was
a=fmtp:<num>
And if it had, it would reset the string. Its calculation was off when
working with chan_sip, though. chan_sip passes the entire built SDP
rather than an empty string. This resulted in always putting an empty
fmtp line in the SDP.
ASTERISK-26520 #close
Reported by scgm11
Change-Id: Ib2e8712d26a47067e5f36d5973577added01dbb5
|
|
|
|
When Opus is negotiated but not loaded, the log is spammed with messages
because the system does not know how to calculate the number of samples in
a frame.
* Suppress the warning by supplying a function that assumes 20ms of
samples in the frame. For pass through support it doesn't really seem to
matter what number of samples is returned anyway.
ASTERISK-26605 #close
Change-Id: Icf2273692f040dc2c45b01e72a790d11092f9e0f
|
|
Responding to authentication challenges leaks PJSIP memory pools.
The leak was introduced with a pjproject 2.5.5 API change.
https://trac.pjsip.org/repos/ticket/1929 changed the API usage of
pjsip_auth_clt_init() to require the new API pjsip_auth_clt_deinit() to
clean up cached authentication allocations that get allocated with
pjsip_auth_clt_reinit_req().
ASTERISK-26516 #close
Change-Id: I4473141b8c3961d0dc91c382beb3876b3efb45c8
|
|
One of the code paths in __ast_file_read_dirs will only get executed if
the OS doesn't support dirent->d_type OR if the filesystem the
particular file is on doesn't support it. So, while standard Linux
systems support the field, some filesystems like XFS do not. In this
case, we need to call stat() to determine whether the directory entry
is a file or directory so we append the filename to the supplied
directory path and call stat. We forgot to truncate path back to just
the directory afterwards though so we were passing a complete file name
to the callback in the dir_name parameter instead of just the directory
name.
The logic has been re-written to only create a full_path if we need to
call stat() or if we need to descend into another directory.
Change-Id: I54e4228bd8355fad65200c6df3ec4c9c8a98dfba
|
|
|
|
|
|
During the development of Asterisk 14 the behavior of
the Command AMI action was altered such that the result
was returned on lines with a prefix of "Output: ". While
this was documented in the UPGRADE.txt file it is also
reasonable that this should bump the AMI version number.
ASTERISK-26556
Change-Id: Idf1bf01608e53f7bfdf43ddb4d0683e53f74ee42
|
|
The PJ_ICE_MAX_CHECKS constant is used by pjproject to determine how
many pairs of local/remote candidates will be made. If for some reason
we reach this upper bound, ICE will generally fail and no media will
flow between the browser and Asterisk.
This patch makes PJ_ICE_MAX_CHECKS set to the total possible number of
pairs of candidates we'd theoretically allow, which is
PJ_ICE_MAX_CAND^2. Prior to this patch, we simply multiplied
PJ_ICE_MAX_CAND by two; on systems with multiple interfaces (I blame
Docker), this is far too low to allow WebRTC calls to succeed.
Setting this to be PJ_ICE_MAX_CAND^2 allowed WebRTC calls to succeed
even when the system Asterisk was running on had quite a few virtual
interfaces.
Change-Id: Icd4f17de0ac9d3a83dddfc8bf1cb7616bc107d55
|
|
In 9785e8d0, app_echo was updated to relay video source updates to the
channel for the purposes of displaying video in WebRTC tests.
Unfortunately, this can cause a Kafkaesque nightmare if two or more
Local channels are in a bridge together where their ends are in
app_echo. When this situation occurs, a video update sent into app_echo
will cause the video update to be relayed to the other Local channels,
causing another round of video updates, etc. In not much time at all,
the channel length queues will be overwhelmed, channel alert pipes will
fail, and all hell will break loose as Asterisk merrily continues to
throw more video update requests onto the channels.
This patch updates app_echo to *only* relay a single video update. Once
a video update has been made, all further video updates are dropped.
This meets the intended purpose of the original patch: if we get a video
update and we're in app_echo, go ahead and ask the sender to update
themselves. However, once we've got that video stream sync'd up, don't
keep spamming the world.
Change-Id: I9210780b08d4c17ddb38599d1c64453adfc34f74
|
|
In multi-party bridges, Asterisk currently supports two video modes:
* Follow the talker, in which the speaker with the most energy is shown
to all participants but the speaker, and the speaker sees the
previous video source
* Explicitly set video sources, in which all participants see a locked
video source
Prior to this patch, ARI had no ability to manipulate the video source.
This isn't important for two-party bridges, in which Asterisk merely
relays the video between the participants. However, in a multi-party
bridge, it can be advantageous to allow an external application to
manipulate the video source.
This patch provides two new routes to accomplish this:
(1) setVideoSource: POST /bridges/{bridgeId}/videoSource/{channelId}
Sets a video source to an explicit channel
(2) clearVideoSource: DELETE /bridges/{bridgeId}/videoSource
Removes any explicit video source, and sets the video mode to talk
detection
ASTERISK-26595 #close
Change-Id: I98e455d5bffc08ea5e8d6b84ccaf063c714e6621
|
|
ASTERISK-26343
Change-Id: I06dbf7366e26028251964143454a77d017bb61c8
(cherry picked from commit 0be46aaf6b8b9eb5b0160ec591cdc2c6e1802a6d)
(cherry picked from commit 7263a17ca046923c245296a3cee21df0e4bd499a)
(cherry picked from commit ebf8d94eb2f0d14b824ee6243789870325583624)
|
