| Age | Commit message (Collapse) | Author |
|---|
|
|
|
This commit fixes two possible scenarios:
* When recording name and if during recording you hangup, file is never
removed. This is due to the fact file location is nulled.
* When recording name and if you hangup during thank-you prompt, file
is never removed.
ASTERISK-27123 #close
Change-Id: I39b7271408b4b54ce880c5111a886aa8f28c2625
|
|
|
|
On every reload of chan_iax2 module, MWI subscription was added, which
results in additional taskprocessors being accumulated over time.
This commit fixes it by making sure we check for existing subscription
first.
This was verified with 'core show taskprocessors' CLI command.
ASTERISK-27122 #close
Change-Id: Ie2ef528fd5ca01b933eeb88188cc10967899cfb9
|
|
This patch creates a new configuration option called "webrtc". When enabled it
defaults and enables the following options that are needed in order for webrtc
to work in Asterisk:
rtcp-mux, use_avpf, ice_support, and use_received_transport=enabled
media_encryption=dtls
dtls_verify=fingerprint
dtls_setup=actpass
When "webrtc" is enabled, this patch also parses the "msid" media level
attribute from an SDP. It will also appropriately add it onto the outgoing
session when applicable.
Lastly, when "webrtc" is enabled h264 RTCP FIR feedback frames are now sent.
ASTERISK-27119 #close
Change-Id: I5ec02e07c5d5b9ad86a34fdf31bf2f9da9aac6fd
|
|
Added necessary lines to make the en_NZ language set selectable and to get
core sounds 1.6 pulled down.
ASTERISK-26807 #close
ASTERISK-25816 #close
ASTERISK-26274 #close
Change-Id: I84e4dd4696568cc1ba318d12ac4b075461d6eed4
|
|
|
|
This adds support for parsing timelen values from config files. This
includes support for all flags which apply to PARSE_INT32. Support for
this parser is added to ACO via the OPT_TIMELEN_T option type.
Fixes an issue where extra characters provided to ast_app_parse_timelen
were ignored, they now cause an error.
Testing is included.
ASTERISK-27117 #close
Change-Id: I6b333feca7e3f83b4ef5bf2636fc0fd613742554
|
|
BUNDLE is a specification used in WebRTC to allow multiple
streams to use the same underlying transport. This reduces
the number of ICE and DTLS negotiations that has to occur
to 1 normally.
This change implements this by adding support for it to
the RTP SDP module in PJSIP. BUNDLE can be turned on using
the "bundle" option and on an offer we will offer to
bundle streams together. On an answer we will accept any
bundle groups provided. Once accepted each stream is bundled
to another RTP instance for transport.
For the res_rtp_asterisk changes the ability to bundle
an RTP instance to another based on the SSRC received
from the remote side has been added. For outgoing traffic
if an RTP instance is bundled to another we will use the
other RTP instance for any transport related things. For
incoming traffic received from the transport instance we
look up the correct instance based on the SSRC and use it
for any non-transport related data.
ASTERISK-27118
Change-Id: I96c0920b9f9aca7382256484765a239017973c11
|
|
Currently when rtp is paused, no packets are written to the
recorded audio file, causing the silence to be skipped and recording
not properly time aligned. The read handler as been adapted to
return a silence frame of the correct size.
ASTERISK-27128 #close
Change-Id: I2d7f60650457860b9c70907b14426756b058a844
|
|
arm the t38 webhook always, so we can correctly reject a
T38 negotiation request when t38 is disabled on a channel
Change-Id: Ib1ffe35aee145d4e0fe61dd012580be11aae079d
|
|
This adds a parameter to ast_waitfordigit_full which can be used to only
stop waiting when certain expected digits are received. Any unexpected
DTMF digits are simply ignored.
This also creates a new dialplan application WaitDigit.
ASTERISK-27129 #close
Change-Id: Id233935ea3d13e71c75a0861834c5936c3700ef9
|
|
In say_date_generic the timezonename parameter is passed but never
used. Fix it by passing it to the ast_localtime function.
ASTERISK-27124
Change-Id: I63106b8db10426d417d7275f22554a616e92fae4
|
|
ASTERISK-27127 #close
Reported by: HZMI8gkCvPpom0tM
Change-Id: I2b0c54570d58156e37166ac536728af3b6c01789
|
|
|
|
established"
|
|
|
|
|
|
|
|
|
|
This change fixes a few things uncovered during SFU testing.
1. Unreal channels incorrectly forwarded video frames when
no video stream was present on them. This caused a crash when
they were read as the core requires a stream to exist for the
underlying media type. The Unreal channel will now ensure a
stream exists for the media type before forwarding the frame
and if no stream exists then the frame is dropped.
2. Mapping of frames during bridging from the stream number of
the underlying channel to the stream number of the bridge was
done in the wrong location. This resulted in the frame getting
dropped. This mapping now occurs on reading of the frame from
the channel.
3. Bridging was using the wrong ast_read function resulting in
it living in a non-multistream world.
4. In bridge_softmix when adding new streams to existing channels
the wrong stream topology was copied resulting in no streams
being added.
Change-Id: Ib7445722c3219951d6740802a0feddf2908c18c8
|
|
By default, when res_musiconhold reloads or unloads, it sends a HUP
signal to custom applications (and all descendants), waits 100ms,
then sends a TERM signal, waits 100ms, then finally sends a KILL
signal. An application which is interacting with an external
device and/or spawns children of its own may not be able to exit
cleanly in the default times, expecially if sent a KILL signal, or
if it's children are getting signals directly from
res_musiconhoild.
* To allow extra time, the 'kill_escalation_delay'
class option can be used to set the number of milliseconds
res_musiconhold waits before escalating kill signals, with the
default being the current 100ms.
* To control to whom the signals are sent, the "kill_method" class
option can be set to "process_group" (the default, existing
behavior), which sends signals to the application and its
descendants directly, or "process" which sends signals only to the
application itself.
Change-Id: Iff70a1a9405685a9021a68416830c0db5158603b
|
|
When performing the "Queues" action via AMI, it outputs the same
text that the Asterisk CLI outputs when running a "queue show"
command, which does not conform with the AMI spec. "QueueStatus"
already does what the "Queues" action should do, so instead of
correcting the output, the "Queues" action will be removed and
"QueueStatus" should be used instead.
ASTERISK-27073 #close
Reported by: Brian
Change-Id: Id11743859758255b69cc3a557750d7a56c6d16f8
|
|
Setting maxfiles (maximum number of open files) has no practical
effect on a remote asterisk (rasterisk, rasterisk -x).
It has an ill effect of printing an extra message, which
may be annoying in case of -x.
ASTERISK-27105 #close
Change-Id: Iaf9eb344e4b4b517df91b736b27ec55f6a6921a2
|
|
Messages like "fwrite() failed: Connection reset by peer" are no
help whatsoever, especially since they can be caused simply by a
client disconnecting.
* Make those WARNINGs DEBUGs.
* Check the return from ast_iostream_printf of headers.
Change-Id: I17bd5f3621514152a7b2b263c801324c5e96568b
|
|
|
|
|
|
|
|
|
|
If the from_user field contains certain characters (like @, {, ^, etc.),
PJSIP will return a null value for the URI when attempting to parse it.
This causes a crash when trying to dial out through a trunk that contains
these invalid characters in its from_user field.
This change checks the configuration and ensures that an endpoint will
not be created if the from_user contains an invalid character. It also
adds a null check to the PJSIP URI parsing as a backup.
ASTERISK-27036 #close
Reported by: Maxim Vasilev
Change-Id: I0396fdb5080604e0bdf1277464d5c8a85db913d0
|
|
|
|
Change-Id: I9020ff9f2b3749904317c0c173f47a1bbed6f929
|
|
|
|
|
|
When a message is received on the TURN socket, the code processing the
message needs to call into the ICE/STUN session for further processing.
This code path locks the TURN group lock then the ICE/STUN group lock. In
another thread an ICE/STUN timer can fire off to send a keep alive message
over the TURN socket. In this code path, the ICE/STUN group lock is
obtained then the TURN group lock is obtained to send the packet. A
classic deadlock case if the group locks are not the same.
* Made TURN get created using the ICE/STUN session's group lock.
NOTE: I was originally concerned that the ICE/STUN session can get
recreated by ice_reset_session() for an event like RTCP multiplexing
causing a change during SDP negotiation. In this case the TURN group lock
would become different. However, TURN is also recreated as part of the
ICE/STUN recreation in ice_create() when all known ICE candidates are
added to the new ICE session. While the ICE/STUN and TURN sessions are
being recreated there is a period where the group locks could be
different.
ASTERISK-27023 #close
Patches:
res_rtp_asterisk-turn-deadlock-fix.patch (license #6502)
patch uploaded by Michael Walton (modified)
Change-Id: Ic870edb99ce4988a8c8eb6e678ca7f19da1432b9
|
|
Change-Id: I04f607f084bda9b1b7f626e8e9735c37dc751187
|
|
|
|
|
|
The video stream was using the audio stream RTP instance addresses to
check if the video RTP gets directed to an allowed direct media Access
Control List (ACL) address. There is no guarantee that the video RTP
instance uses the same addresses as the audio RTP instance.
This looks like it has been a bug since v11 when direct media ACL was
first added to chan_sip and then faithfully reproduced through a couple
code refactorings into the new bridging architecture.
Change-Id: I8ddd56320e0eea769f3ceed3fa5b6bdfb51d681a
|
|
|
|
|
|
Support)."
|
|
|
|
|
|
|
|
This API was not actively maintained, was not added to new modules
(such as res_pjsip), and there exist better alternatives to acquire the
same information, such as the ARI.
Change-Id: I4b2185a83aeb74798b4ad43ff8f89f971096aa83
|
|
This patch include a feature to change the priority a caller in a
queue by CLI and AMI.
Change-Id: I55d520d71cc1cefe9a9b81fefaefc14679e96133
|
|
When sip.conf contained tcpenable=yes and autodomain=yes, the TCP domain was
added in any case, because of a local Boolean-negation error of the return value
of ast_sockaddr_cmp. After fixing this error for TCP and TLS, the TLS domain was
still always added with tlsenable=yes, because the domains were not compared
just on the address but also on the port – and TLS is always on a different port
than UDP/TCP.
ASTERISK-27106
Change-Id: I14fe9e319e238320b094016980445ef3a5b3337c
|
|
Because of a copy-and-paste error when the struct ast_sockaddr changed,
tlsbindaddr was not added, when sip.conf contained autodomain=yes; see
"show sip domains" on the command-line interface (CLI) of Asterisk.
ASTERISK-27106
Change-Id: I3d0957150017c223136968ef1266f275d0d6695e
|
|
The primary focus of this patch is adding a missing call to
ast_odbc_release_obj(), but is also a general cleanup of the ODBC
related code in app_voicemail.
ASTERISK-27093 #close
Change-Id: I8e285142eaeb3146b4287a928276b70db76c902b
|
