summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-12-14res_musiconhold: Start playlist after initial announcementSean Bright
Reset the samples counter to zero when we are done playing an announcement so that we don't skip into the middle of the first file in the playlist. Also add the selected annoucement to the output of 'moh show classes.' ASTERISK-24329 #close Reported by: Thomas Frederiksen Change-Id: I2a5f986a31279c981592f49391409ebf38d6f6d0
2017-12-14Merge "menuselect: Tweak check for recently run configure." into 15Joshua Colp
2017-12-14Merge "README: Remove outdated references to tex docs" into 15Joshua Colp
2017-12-13Merge "res_pjsip: Assign support levels to a few modules" into 15Joshua Colp
2017-12-13Merge "pjsip_options: contacts sometimes not being updated on reload" into 15Jenkins2
2017-12-13README: Remove outdated references to tex docsGeorge Joseph
Added links to the wiki to replace references to outdated tex docs. ASTERISK-27430 Reported by: Corey Farrell Change-Id: I5007e732b30bc7b63d124c530ae8857c89991209
2017-12-13Merge "pjsip_options: dynamic contact's fields not updated on reload" into 15Jenkins2
2017-12-13Merge "CLI: Fix 'core show sysinfo' function ordering." into 15Jenkins2
2017-12-13Merge "chan_pjsip/res_pjsip: Add CHANNEL(pjsip,request_uri)" into 15Jenkins2
2017-12-13Merge "AST-2017-012: Place single RTCP report block at beginning of report." ↵George Joseph
into 15
2017-12-13AST-2017-012: Place single RTCP report block at beginning of report.Joshua Colp
When the RTCP code was transitioned over to Stasis a code change was made to keep track of how many reports are present. This count controlled where report blocks were placed in the RTCP report. If a compound RTCP packet was received this logic would incorrectly place a report block in the wrong location resulting in a write to an invalid location. This change removes this counting logic and always places the report block at the first position. If in the future multiple reports are supported the logic can be extended but for now keeping a count serves no purpose. ASTERISK-27382 ASTERISK-27429 Change-Id: Iad6c8a9985c4b608ef493e19c421211615485116
2017-12-13Merge "chan_sip: Don't crash in Dial on invalid destination" into 15Joshua Colp
2017-12-13Merge "chan_sip: Don't send trailing \0 on keep alive packets" into 15Jenkins2
2017-12-12chan_sip: Don't send trailing \0 on keep alive packetsSean Bright
This is a partial fix for ASTERISK~25817 but does not address the comments regarding RFC 5626. Change-Id: I227e2d10c0035bbfa1c6e46ae2318fd1122d8420
2017-12-12chan_sip: Don't crash in Dial on invalid destinationSean Bright
Stripping the DNID in a SIP dial string can result in attempting to call the argument parsing macros on an empty string, causing a crash. ASTERISK-26131 #close Reported by: Dwayne Hubbard Patches: dw-asterisk-master-dnid-crash.patch (license #6257) patch uploaded by Dwayne Hubbard Change-Id: Ib84c1f740a9ec0539d582b09d847fc85ddca1c5e
2017-12-12menuselect: Tweak check for recently run configure.Corey Farrell
Recently menuselect has randomly produced an error stating that configure was just run and make had to be restarted. I believe this is due to an incorrect menuselect/Makefile rule. The original rule produced an error if makeopts or autoconfig.h were older than makeopts.in or autoconfig.h.in. I believe this can create an issue if makeopts is older than autoconfig.h.in or if autoconfig.h is older than makeopts.in. The new rules compare files independently. Change-Id: Ibca155035fa1392c95e33cbf25f257902abba17b
2017-12-12chan_pjsip/res_pjsip: Add CHANNEL(pjsip,request_uri)Richard Mudgett
This patch does three things associated with the initial incoming INVITE request URI. 1) Add access to the full initial incoming INVITE request URI. 2) We were not setting DNID on incoming PJSIP channels. The DNID is the user portion of the initial incoming INVITE Request-URI. The value is accessed by reading CALLERID(dnid). 3) Fix CHANNEL(pjsip,target_uri) documentation. * The initial incoming INVITE request URI is now available using CHANNEL(pjsip,request_uri). * Set the DNID on PJSIP channel creation so CALLERID(dnid) can return the initial incoming INVITE request URI user portion. * CHANNEL(pjsip,target_uri) now correctly documents that the target URI is the contact URI. * Refactored print_escaped_uri() out of channel_read_pjsip() to handle pjsip_uri_print() error condition when the buffer is too small. ASTERISK-27478 Change-Id: I512e60d1f162395c946451becb37af3333337b33
2017-12-12res_pjsip: Add TLSv1.1 and TLSv1.2 supportSean Bright
Support for these protocols was added in the same commit as the 'proto' field, so we can safely use the same ./configure check. For reference: https://trac.pjsip.org/repos/changeset/4968 Change-Id: Icf4975d785d6bfb8f30ac7ffa695a0adf9382dac
2017-12-12res_pjsip: Assign support levels to a few modulesSean Bright
Change-Id: I51f6945c4023cb93fc7b87be5ab4c50e9e6ee27d
2017-12-11CLI: Fix 'core show sysinfo' function ordering.Corey Farrell
Handle CLI initialization before any processing occurs. Change-Id: I598b911d2e409214bbdfd0ba0882be1d602d221c
2017-12-11stasis_channels.c: Don't set channel snapshot caller_dnid twice.Richard Mudgett
Change-Id: Ib8d45bbdfbda81e65045f6dff874d189b74e5471
2017-12-11Merge "codec_opus: Make libcurl a dependency in menuselect" into 15George Joseph
2017-12-11Merge "astdb: Improve prefix searches in astdb" into 15Jenkins2
2017-12-11Merge "loader: Refactor resource_name_match." into 15Jenkins2
2017-12-11Merge "res_stasis and res_speech: Fix load order." into 15Jenkins2
2017-12-11Merge "utils: Add convenience function for setting fd flags" into 15Jenkins2
2017-12-11codec_opus: Make libcurl a dependency in menuselectSean Bright
ASTERISK-27475 #close Change-Id: If7384bc6ed002ef140dec69798d14c52b7cfd800
2017-12-11Merge "pjsip: Improve CLI completion performance" into 15Jenkins2
2017-12-11Merge "CDR: Fix deadlock setting some CDR values." into 15Jenkins2
2017-12-10pjsip: Improve CLI completion performanceSean Bright
Use the new ast_cli_completion_add() function to improve completion performance for commands like 'pjsip show endpoint.' Change-Id: I76d802294d2ac1766110dc75f7d117c8541ce348
2017-12-10astdb: Improve prefix searches in astdbSean Bright
Using the LIKE operator requires a full table scan of 'astdb', whereas a comparison operation is able to use the primary key index. This patch adds a new function to the AstDB API for quick prefix matches and updates res_sorcery_astdb to utilize it. This showed substantial performance improvement in my test environment. Related to ASTERISK~26806, but does not completely resolve it. Change-Id: I7d37f9ba2aea139dabf2ca72d31fbe34bd9b2fa1
2017-12-08loader: Refactor resource_name_match.Corey Farrell
Optimize resource_name_match. This change eliminates use of ast_strdupa, instead verifying that both basename's are the same length, then using strncasecmp. Change-Id: I477275c0e954c99d74be5abfc8bb6545b04e5a3d
2017-12-08pjsip_configuration: Add correct file headerSean Bright
Change-Id: I25348c386a222bb704aff07f54375108a6402906
2017-12-08utils: Add convenience function for setting fd flagsSean Bright
There are many places in the code base where we ignore the return value of fcntl() when getting/setting file descriptior flags. This patch introduces a convenience function that allows setting or clearing file descriptor flags and will also log an error on failure for later analysis. Change-Id: I8b81901e1b1bd537ca632567cdb408931c6eded7
2017-12-07res_stasis and res_speech: Fix load order.Corey Farrell
res_stasis was missing AST_MODFLAG_LOAD_ORDER. Set res_stasis and res_speech to start at (AST_MODPRI_APP_DEPEND - 1) so they are ready for dependent modules. Change-Id: I27f4f3810a95b6be8a5bfbf62be2ace6bfab6ff3
2017-12-07pjsip_options: contacts sometimes not being updated on reloadKevin Harwell
For both dynamic and static contacts it was possible that potential AOR changes were not being applied to all contacts. This was because the qualify and schedule code was only retrieving AOR's, and contacts with frequencies greater than zero. For instance the following could happen: and AOR/contact has a frequency of 5, it then gets set to 0, and then a reload occurs. All scheduled OPTIONS are stopped, a list of AOR's is retrieved with frequency > 0, but none are selected since in this scenario all are 0. The contact for the one previously set to 5 though does not get updated, so it's status remains "AVAILABLE". This patch makes it so all contacts (static and dynamic) are selected, and appropriately updated if need be. ASTERISK-27467 #close Change-Id: I7a920170f89c683af9505d4723a44fc6841decdb
2017-12-07pjsip_options: dynamic contact's fields not updated on reloadKevin Harwell
Dynamic contacts were not being properly updated on reload. As a matter of fact any changes to the AOR that a dynamic contact was associated with were not being applied. On reload, this patch makes it so for each dynamic contact, the associated AOR is now retrieved and the AOR's fields are applied to the contact. ASTERISK-27467 Change-Id: I8e3165dc6a745218c1c9db837f77fafa0516985d
2017-12-07Merge "translate: Skip matrix_rebuild during shutdown." into 15Jenkins2
2017-12-07Merge "CLI: Fix remote console completion." into 15Joshua Colp
2017-12-07Merge "sounds_index: Avoid repeatedly reindexing." into 15Jenkins2
2017-12-07Merge "media_index: Improve startup." into 15Jenkins2
2017-12-07CLI: Fix remote console completion.Corey Farrell
Duplicate checking was done incorrectly when parsing completion options from a remote console causing all options to be ignored as duplicates. Once fixed I had to separate processing of the best match to ensure it was not identified as a duplicate when it is the only match. ASTERISK-27465 Change-Id: Ibbdb29f88211742071836c9b3f4d2aa1221cd0f9
2017-12-07translate: Skip matrix_rebuild during shutdown.Corey Farrell
Change-Id: I1e5eef4029cba56e33d786c5a5ade8091e531a1e
2017-12-06sounds_index: Avoid repeatedly reindexing.Corey Farrell
The sounds index is rebuilt each time a format is registered or unregistered. This causes the index to be repeatedly rebuilt during startup and shutdown. This patch significantly reduces the work done by delaying sound index initialization until after modules are loaded. This way a reindex only occurs if a format module is loaded after startup. We also skip reindexing when format modules are unloaded during shutdown. Change-Id: I585fd6ee04200612ab1490dc804f76805f89cf0a
2017-12-06media_index: Improve startup.Corey Farrell
This eliminates some wasteful operations in media_index startup. * Replace statically set string-fields with char[0]. * Eliminate pointless RAII_VAR's. * alloc_variant: Avoid pointless ao2_find on new info->variant. * Stop trying find_variant before alloc_variant. * process_media_file: replace ast_str with ast_asprintf. This avoids reallocation of file_id_str. Overall sounds_index.c is about 27% of Asterisk startup time when using sample configs. This patch reduces it to 20%. This is a half-fix. The real problem is that the media_index is regenerated repeatedly - 68 times in my test. Change-Id: Ia50b752f8efb356f852b05c4be495a6631af8652
2017-12-06CDR: Fix deadlock setting some CDR values.Richard Mudgett
Setting channel variables with the AMI Originate action caused a deadlock when you set CDR(amaflags) or CDR(accountcode). This path has the channel locked when the CDR function is called. The CDR function then synchronously passes the job to a stasis thread. The stasis handling function then attempts to lock the channel. Deadlock results. * Avoid deadlock by making the CDR function handle setting amaflags and accountcode directly on the channel rather than passing it off to the CDR processing code under a stasis thread to do it. * Made the CHANNEL function and the CDR function process amaflags the same way. * Fixed referencing the wrong message type in cdr_prop_write(). ASTERISK-27460 Change-Id: I5eacb47586bc0b8f8ff76a19bd92d1dc38b75e8f
2017-12-06bridge_basic.c: Update transfer diagnostic messages addendum.Richard Mudgett
* Added start DTMF transfer verbose messages. * Made associated transfer messages use a similar message format. * Adjusted message verbose level as requested by initial reporter. ASTERISK-27449 Change-Id: I2045714586414b3c5ef1f3cc56c1c4af4b31f551
2017-12-06Merge "bridge_basic.c: Update transfer diagnostic messages." into 15Joshua Colp
2017-12-05Merge "Add new object for VoicemailUserEntry" into 15Jenkins2
2017-12-05Merge "res_rtp_asterisk.c: Increase strictrtp learning timeout time." into 15Jenkins2
generated by cgit v1.2.3 (git 2.39.1) at 2024-06-26 19:09:11 +0000