Age | Commit message (Collapse) | Author |
|
While trying to get WebRTC working with chan_pjsip, I was running
into the following error:
Attempted to set an invalid DTLS-SRTP configuration on RTP
instance...
Josh helpfully pointed out that res_srtp.so might not be loaded, and
sure enough, it wasn't. This patch adds a ERROR indiciating as much
to hopefully help others having a similar problem.
Change-Id: I13aa477b47b299876728a21b130998a0ea6cd19f
|
|
|
|
Added the necessary lines to the Makefile and sounds.xml so we'll have the
Swedish sounds in all available formats in menuselect.
See also: Swedish sounds were added into the core sounds release 1.4.27.
ASTERISK-24744 #close
Reported by: Tove Hjelm
Tested by: Rusty Newton
Change-Id: Ib6f4fd177afd1667b2402735034001d4d055a908
|
|
Moved contrib/asterisk-ng-doxygen to doc/asterisk-ng-doxygen.in
Changed /Makefile to copy asterisk-ng-doxygen.in to
asterisk-ng-doxygen then modify it with version instead of
modifying asterisk-ng-doxygen directly. Updated clean
targets as well.
Updated /.gitignore and doc/.gitignore.
Change-Id: I38712d3e334fa4baec19d30d05de8c6f28137622
|
|
termination"
|
|
* Added a lookbehind to one-line comment matcher to skip escaped
semicolons.
* Added support for block comments.
Change-Id: Id17dfaeda8ed4be572e8107a0c010066584aaee7
|
|
|
|
The res_pjsip_exten_state module currently has a race condition between
processing the extension state callback from the PBX core and processing
the subscription shutdown callback from res_pjsip_pubsub. There is currently
no synchronization between the two. This can present a problem as while
the SIP subscription will remain valid the tree it points to may not.
This is in particular a problem as a task to send a NOTIFY may get queued
which will try to use the tree that may no longer be valid.
This change does the following to fix this problem:
1. All access to the subscription tree is done within the task that
sends the NOTIFY to ensure that no other thread is modifying or
destroying the tree. This task executes on the serializer for the
subscriptions.
2. A reference to the subscription serializer is kept to ensure it
remains valid for the lifetime of the extension state subscription.
3. The NOTIFY task has been changed so it will no longer attempt
to send a NOTIFY if the subscription has already been terminated.
ASTERISK-25057 #close
Reported by: Matt Jordan
Change-Id: I0b3cd2fac5be8d9b3dc5e693aaa79846eeaf5643
|
|
|
|
|
|
* changes:
CLI: Enable automatic references to modules.
Modules: Make ast_module_info->self available to auxiliary sources.
|
|
|
|
|
|
transfer."
|
|
After using the new vector stuff for real I found...
A bug in AST_VECTOR_INSERT_AT that could cause a seg fault.
The callbacks needed to be closer to ao2_callback in behavior
WRT to CMP_MATCH and CMP_STOP behavior and the ability to return
a vector of matched entries.
A pre-existing issue with APPEND and REPLACE was also fixed.
I also added a new macro to test.h that acts like ast_test_validate
but also accepts a return code variable and a cleanup label. As well
as printing the error, it sets the rc variable to AST_TEST_FAIL and
does a goto to the specified label on error. I had a local version
of this in test_vector so I just moved it.
ASTERISK-25045
Change-Id: I05e5e47fd02f61964be13b7e8942bab5d61b29cc
|
|
Creating a snoop channel in ARI and spying only on a single direction (in or
out) results in CPU utilization continually increasing until the CPU is fully
consumed. This occurs because frames are being put in the opposing direction's
slin factory queue, but not being removed.
Fixed the problem by always reading and disposing of frames from the opposite
queue of the direction selected.
ASTERISK-24938 #closes
Change-Id: I935bfd15f1db958f364d9d6b3b45582c0113dd60
|
|
ASTERISK-25034
Reported by: Richard Mudgett
Change-Id: I1ff8f02124d2f4abd632a050da52c64285bb7f30
|
|
|
|
|
|
|
|
Change-Id: I26d4d2cb9cee924632ff59ef0b30a7e6a1e2b00d
|
|
|
|
A crash happens with this sequence of steps:
1) Party A is connected to party B.
2) Party B starts a DTMF attended transfer.
3) Party A hangs up while party B is dialing party C.
When party A hangs up the bridge that party A and party B are in is
dissolved and party B is kicked out of the bridge. When party B finishes
dialing party C he attempts to move to the new bridge with party C. Since
party B is no longer in a bridge the attempted move dereferences a NULL
bridge_channel pointer and crashes.
* Made the hold(), unhold(), ringing(), and the bridge_move() functions
tolerant of the channel not being in a bridge. The assertion that party B
is always in a bridge is not true if the bridged peer of party B hangs up
and dissolves the bridge. Being tolerant of not being in a bridge allows
the peer hangup stimulus to be processed by the FSM.
* Made the bridge_move() function return void since where the return value
for a failed move was checked generated a FSM coding ERROR message for a
normal off-nominal condition.
* Eliminated most uses of RAII_VAR in bridge_basic.c.
ASTERISK-25003 #close
Reported by: Artem Volodin
Change-Id: Ie2c1b14e5e647d4ea6de300bf56d69805d7bcada
|
|
This patch fixes EXITWITHTIMEOUT queue_log entry to always come with 3
parameters: position, original position and waiting time.
ASTERISK-25038 #close
Reported by: Etienne Lessard
Change-Id: I0c62045922e26bee2125e93aee1dee17eee79618
|
|
Change-Id: I57081045c72b9fcf12d5c84493278f9272c31b32
|
|
|
|
|
|
ERR_remove_state was deprecated with OpenSSL 1.0.0 and was replaced by
ERR_remove_thread_state. ERR_load_SSL_strings and ERR_load_BIO_strings were
called by SSL_load_error_strings already and got removed. These changes allow
OpenSSL forks like BoringSSL to be used with Asterisk.
ASTERISK-25043 #close
Reported by: Alexander Traud
patches:
asterisk_with_BoringSSL.patch uploaded by Alexander Traud (License 6520)
Change-Id: If1c0871ece21a7e0763fafbd2fa023ae49d4d629
|
|
|
|
Missed this module in the previous commit. res_ari_bridges uses symbols
from res_stasis_playback and res_stasis_recording.
ASTERISK-25027 #close
Reported by: Corey Farrell
Change-Id: I90bf756abd25adfc4920d2869ebe7feb636b8c5f
|
|
Switch manager actions in pbx_config to use the registration macro that
passes the module pointer, allowing pbx_config reference to be bumped
while the manager actions run.
ASTERISK-25061 #close
Reported by: Corey Farrell
Change-Id: I422c50dd74814616ac10c5e9c6598a0b1bc2c44e
|
|
A recent change went into Asterisk which added reference counts to the
channels stored in a dial masquerade datastore. Unfortunately this
included a reference to the caller in a dialing operation. While all
of the dialed targets have the datastore removed from them upon dialing
completion this did not occur for the caller, causing it to have a
reference to itself that could go never go away (as it depended on
the destruction of the datastore which only happened when the channel
was destroyed). This resulted in the caller channel remaining on the
system despite it having hung up.
This change does the following to fix this issue:
1. The dial masquerade datastore is now removed from the caller upon
dialing completion, just like the dialed targets.
2. Upon destruction of the caller all the dialed targets are also
removed from the dial masquerade datastore (just in case).
3. The reference to the caller has been removed as it should not be
possible for the datastore to now be valid/useful after the lifetime
of the caller has ended.
ASTERISK-25025 #close
Change-Id: I1ef4ca5ca04980028604cc2af5d2992ac3431b3f
|
|
* Pass module to ast_cli_register and ast_cli_register_multiple.
* Add a module reference before executing any CLI callback, remove
the reference when complete.
ASTERISK-25049 #close
Reported by: Corey Farrell
Change-Id: I7aafc7c9f2b912918f28fe51d51e9e8a755750e3
|
|
ast_module_info->self is often needed to register items with the core. Many
modules have ad-hoc code to make this pointer available to auxiliary sources.
This change updates the module build process to make the needed information
available to all sources in a module.
ASTERISK-25056 #close
Reported by: Corey Farrell
Change-Id: I18c8cd58fbcb1b708425f6757becaeca9fa91815
|
|
Renamed AST_VECTOR_INSERT to AST_VECTOR_REPLACE because it really
does replace not insert. The few users of AST_VECTOR_INSERT were
refactored. Because these are macros, there should be no ABI
compatibility issues.
Added AST_VECTOR_INSERT_AT that actually inserts an element into the
vector at a specific index pushing existing elements to the right.
Added AST_VECTOR_GET_CMP that can retrieve from the vector based
on a user-provided compare function.
Added AST_VECTOR_CALLBACK function that will execute a function
for each element in the vector. Similar to ao2_callback and
ao2_callback_data functions although the vector callback can take
a variable number of arguments. This should allow easy migration
to a vector where a container might be too heavy.
Added read/write locked vector and lock manipulation macros.
Added unit tests.
ASTERISK-25045 #close
Change-Id: I2e07ecc709d2f5f91bcab8904e5e9340609b00e0
|
|
This adds a test that will fail if any test failed to register. Also fail
if any test registration produced a warning about missing a leading or
trailing slash.
ASTERISK-25053 #close
Reported by: Corey Farrell
Change-Id: I93e50b8fcbcfa7f1f5b41b2c44a51685c09529c3
|
|
mode update"
|
|
|
|
|
|
|
|
Apply the negative connection cache setting to all connections,
even those that are not pooled. This ensures that the connection
will not be re-established before the negative connection cache
time is met.
ASTERISK-22708 #close
Change-Id: I431cc2e8584ab0b6908b3523d0a0e18c9a527271
|
|
|
|
|
|
Format interfaces cannot be unregistered, so the modules that provide them
need to be held open except by shutdown.
ASTERISK-25054 #close
Reported by: Corey Farrell
Change-Id: Iadbd9675bf0d30b8fded5a739b163db3ea2db8f3
|
|
The upgrade script for auto DTMF mode (31cd4f4891ec) added in 88b0fa7755
failed to add ENUM support for Postgres databases. This requires a
specific import from the sqlalchemy.dialects.postgresql package. This
patch corrects this error, which allows for Postgres update scripts to
be generated.
ASTERISK-24706
Change-Id: I4742ac8efa533cd6f18e0bdd907b339a9aedf015
|
|
ASTERISK-25053
Reported by: Corey Farrell
Change-Id: I8c0375dd0818747b2d2e1ceaea87bfbeb2daf8d4
|
|
|
|
|
|
Created autoconf/ast_check_raii.m4: contains AST_CHECK_RAII which
checks compiler requirements for RAII:
gcc: -fnested-functions support
clang: -fblocks (and if required -lBlocksRuntime)
The original check was implemented in configure.ac and now has it's
own file. This function also sets C_COMPILER_FAMILY to either gcc or
clang for use by makefile
Created autoconf/ast_check_strsep_array_bounds.m4 (contains
AST_CHECK_STRSEP_ARRAY_BOUNDS):
which checks if clang is able to handle the optimized strsep & strcmp
functions (linux). If not, the standard libc implementation should be
used instead. Clang + the optimized macro's work with:
strsep(char *, char []), but not with strsepo(char *, char *).
Instead of replacing all the occurences throughout the source code,
not using the optimized macro version seemed easier
See 'define __strcmp_gc(s1, s2, l2) in bits/string2.h':
llvm-comment: Normally, this array-bounds warning are suppressed for
macros, so that unused paths like the one that accesses __s1[3] are
not warned about. But if you preprocess manually, and feed the
result to another instance of clang, it will warn about all the
possible forks of this particular if statement. Instead of switching
of this optimization, another solution would be to run the preproces-
sing step with -frewrite-includes, which should preserve enough
information so that clang should still be able to suppress the diag-
nostic at the compile step later on.
See also "https://llvm.org/bugs/show_bug.cgi?id=20144"
See also "https://llvm.org/bugs/show_bug.cgi?id=11536"
Makefile.rules: If C_COMPILER_FAMILY=clang then add two warning
suppressions:
-Wno-unused-value
-Wno-parentheses-equality
In an earlier review (reviewboard: 4550 and 4554), they were deemed a
nuisace and less than benefitial.
configure.ac:
Added AST_CHECK_RAII() see earlier
Added AST_CHECK_STRSEP_ARRAY_BOUNDS() see earlier
Removed moved content
ASTERISK-24917
Change-Id: I12ea29d3bda2254ad3908e279b7effbbac6a97cb
|
|
This patch adds a new option to cdr.conf, 'newcdrcolumns', that will handle CDR
columns added in Asterisk 1.8. The columns are:
* peeraccount
* linkedid
* sequence
When enabled, the columns in the database entry will be populated with the data
from the CDR.
ASTERISK-24976 #close
Change-Id: I51a57063f4ae5e194a9d933a8df45dc8a4534f0b
|