| Age | Commit message (Collapse) | Author |
|---|
|
* Made ast_manager_event_blob_create() not allocate the ao2 event object
with a lock as it is not needed.
Change-Id: I8e11bfedd22c21316012e0b9dd79f5918f644b7c
|
|
An earlier allocation failure failed to create a channel snapshot for the
AMI HangupRequest/SoftHangupRequest event which resulted in a crash in
channel_hangup_request_cb(). Where the stasis message gets generated
cannot tell if the NULL snapshot returned was because of an allocation
failure or the channel was a dummy channel.
* Made channel_hangup_request_cb() check if the channel blob has a
snapshot and exit if it doesn't.
* Eliminated the RAII_VAR usage in channel_hangup_request_cb().
Change-Id: I0b6a1c4e95cbb7d80b2a7054c6eadecc169dfd24
|
|
You cannot reference the passed in features struct after calling
ast_bridge_impart(). Even if the call fails.
Change-Id: I902b88ba0d5d39520e670fb635078a367268ea21
|
|
softmix_bridge_join() failed because of an allocation failure. To address
this, the softmix bridge technology now checks if the channel failed to
join softmix successfully. In addition, the bridge now begins the process
of kicking the channel out of the bridge so we don't have channels
partially in the bridge for very long.
* Fix the test_channel_feature_hooks.c unit tests. The test channel must
have a valid codec to join the simple_bridge technology. This patch makes
joining a bridge more strict by not allowing partially joined channels to
remain in the bridge.
Change-Id: I97e2ade6a2bcd1214f24fb839fda948825b61a2b
|
|
|
|
|
|
|
|
*lt is NULL if t->tracking == 0
ASTERISK-25948 #close
Change-Id: I4a81af28f9c82a74aa82413d772a7dc8fa6f45ba
|
|
|
|
|
|
When create_new_id_hdr creates a new RPID or PAI header, it starts by cloning
the From header, then it overwrites the display name and uri from the channel's
connected.id. If the connected.id.name wasn't valid, create_new_id_hdr was
leaving the display name from the From header in the new RPID or PAI header.
On an attended transfer where the originator had a caller id number set but not
a display name, the re-INVITE to the final transferee had the number of the
originator but the display name of the transferer.
Added a check to clear out the display name in the new header if
connected.id.name was invalid.
ASTERISK-25942 #close
Change-Id: I60b4bf7a7ece9b7425eba74151c0b4969cd2738b
|
|
|
|
This module is used as part of testsuite tests to confirm
stuff works. I'm accordingly marking it as core as it is
required by those tests.
Change-Id: I558e7af7679b22b8ed641d7dd37ee4ca35b11e88
|
|
The PJSIP parsing functions provide a nice concise way to check the
length of a hostname in a SIP URI. The problem is that in order to use
those parsing functions, it's required to use them from a thread that
has registered with PJLib.
On startup, when parsing AOR configuration, the permanent URI handler
may not be run from a PJLib-registered thread. Specifically, this could
happen when Asterisk was started in daemon mode rather than
console-mode. If PJProject were compiled with assertions enabled, then
this would cause Asterisk to crash on startup.
The solution presented here is to do our own parsing of the contact URI
in order to ensure that the hostname in the URI is not too long. The
parsing does not attempt to perform a full SIP URI parse/validation,
since the hostname in the URI is what is important.
ASTERISK-25928 #close
Reported by Joshua Colp
Change-Id: Ic3d6c20ff3502507c17244a8b7e2ca761dc7fb60
|
|
|
|
|
|
|
|
|
|
Recent changes to the PJSIP registrar resulted in tests failing due to
missing AOR_CONTACT_ADDED test events. The reason for this was that the
user_agent string had junk values in it, resulting in being unable to
generate the event.
I'm going to be honest here, I have no idea why this was happening. Here
are the steps needed for the user_agent variable to get messed up:
* REGISTER is received
* First contact in the REGISTER results in a contact being removed
* Second contact in the REGISTER results in a contact being added
* The contact, AOR, expiration, and user agent all have to be passed as
format parameters to the creation of a string. Any subset of those
parameters would not be enough to cause the problem.
Looking into what was happening, the thing that struck me as odd was
that the user_agent variable was meant to be set to the value of the
User-Agent SIP header in the incoming REGISTER. However, when removing a
contact, the user_agent variable would be set (via ast_strdupa inside a
loop) to the stored contact's user_agent. This means that the
user_agent's value would be incorrect when attempting to process further
contacts in the incoming REGISTER.
The fix here is to use a different variable for the stored user agent
when removing a contact. Correcting the behavior to be correct also
means the memory usage is less weird, and the issue no longer occurs.
ASTERISK-25929 #close
Reported by Joshua Colp
Change-Id: I7cd24c86a38dec69ebcc94150614bc25f46b8c08
|
|
At shutdown it is possible for modules to be unloaded that wouldn't
normally be unloaded. This allows the environment to be cleaned up.
The res_pjsip_transport_management module did not have the unload
logic in it to clean itself up causing the res_pjsip module to not
get unloaded. As a result the res_pjsip monitor thread kept going
processing traffic and timers when it shouldn't.
Change-Id: Ic8cadee131e3b2c436a81d3ae8bb5775999ae00a
|
|
We have to setup the channel roles after the bridge class push is called
because the bridge class push callback may have set roles on the incoming
channel. Since we have already partially pushed the channel into the
bridge and reversing what we have already done could be problematic, the
only thing we can do is press on to complete pushing the channel into the
bridge.
* Ignore any channel role setup errors after pushing the channel into a
bridge. The channel may behave incorrectly in the bridge but we can no
longer abort the push at this time.
Change-Id: I08a97082b729052ee65cdca6bb730cf1289ede00
|
|
If rtupdate=no do not verify sipregs/peers table has updatable fields.
ASTERISK-25934 #close
Change-Id: Iaa2c53037b93daccc7e7333c40d61861847b856d
|
|
|
|
ASTERISK-25888 #close
Change-Id: I007a2f2dd99823e04fb5be3ff01f02b0a2956117
|
|
Change-Id: I195b14994c9dcccb9452491ca20a885d2a54605a
|
|
|
|
There is a good amount of repetition in the two frame handling routines
in the Dial API. This commit combines the two functions into one.
This is in preparation for an upcoming commit that adds the ability to
handle frames for a channel in a bridge.
ASTERISK-25925
Reported by Mark Michelson
Change-Id: Iaae2f174e3058e774cb44e10659fcdfb85345c58
|
|
Failed registration using PJSIP/Realtime if one of the codec name
in allow/disallow option is wrong or contains space.
This patch strip codec name.
ASTERISK-25914
Change-Id: Ifdf02de94e5ddbce305640f6f0666084a3b9283d
|
|
The scheduler thread that kills idle TCP connections was not registering
with PJProject properly and causing assertions if PJProject was built in
debug mode.
This change registers the thread with PJProject the first time that the
scheduler callback executes.
AST-2016-005
Change-Id: I5f7a37e2c80726a99afe9dc2a4a69bdedf661283
|
|
|
|
|
|
|
|
"Idle" here means that someone connects to us and does not send a SIP
request. PJProject will not automatically time out such connections, so
it's up to Asterisk to do it instead.
When we receive an incoming TCP connection, we will start a timer
(equivalent to transaction timer D) waiting to receive an incoming
request. If we do not receive a request in that timeframe, then we will
shut down the TCP connection.
ASTERISK-25796 #close
Reported by George Joseph
AST-2016-005
Change-Id: I7b0d303e5d140d0ccaf2f7af562071e3d1130ac6
|
|
ASTERISK-25796
Reported by George Joseph
AST-2016-005
Change-Id: Id322a05f927392293570599730050bc677d99433
|
|
Due to some ignored return values, Asterisk could crash if processing an
incoming REGISTER whose contact URI was above a certain length.
ASTERISK-25707 #close
Reported by George Joseph
Patches:
0001-res_pjsip-Validate-that-URIs-don-t-exceed-pjproject-.patch
AST-2016-004
Change-Id: I3ea7cee16f29c8088794de3085ca7523c1c4833d
|
|
Fix off nominal crash where we could not setup the channel to process
frames for the softmix bridge technology because of allocation failure.
Change-Id: Ic307a8386e46bf551e48fcd1eb97276714d56372
|
|
In 13, the new ast_string_field_header structure had to be dynamically
allocated and assigned to a pointer in ast_string_field_mgr to preserve ABI
compatability. In master, it can be converted to being a structure-in-place in
ast_string_field_mgr to eliminate the extra alloc and free calls.
Change-Id: Ia97c5345eec68717a15dc16fe2e6746ff2a926f4
|
|
|
|
From the patch submitted to Teluu on 4/12/2016
<<<<<<<<<
The wholesale stripping of '[]' from header parameters causes issues if
something (like a port) occurs after the final ']'.
'[2001:a::b]' will correctly parse to '2001:a::b'
'[2001:a::b]:8080' will correctly parse to '2001:a::b' but the scanner is left
with ':8080' and parsing stops with a syntax error.
I can't even find a case where stripping the '[]' is a good thing anyway. Even
if you continued to parse and resulted in a string that looks like this...
'2001:a::b:8080', it's not valid.
This came up in Asterisk because Kamailio sends us a Contact with an alias
URI parameter that has an IPv6 address in it like this:
Contact: <sip:1171@127.0.0.1:5080;alias=[2001:1:2::3]~43691~6>
which should be legal but causes a syntax error because of the characters
after the final ']'. Even if it didn't, the '[]' should still not be stripped.
I've run the Asterisk Test Suite for PJSIP (252 tests) many of which are IPv6
enabled. No issues were caused by removing the code that strips the '[]'.
>>>>>>>>>>>
ASTERISK-25123 #close
Reported-by: Anthony Messina
Change-Id: I5cb33f4ebf07ee1f2b26d07caae715e2ec65595a
|
|
|
|
The test_voicemail_notify_endl test checks the end-of-line
characters of an email message to confirm that they are consistent.
The test wrongfully assumed that reading from the email message
into a buffer will always result in more than 1 character being
read. This is incorrect. If only 1 character was read the test
would go outside of the buffer and access other memory causing
a crash.
The test now checks to ensure that 2 or more characters are read
in ensuring the test stays within the buffer.
ASTERISK-25874 #close
Change-Id: Ic2c89cea6e90f2c0bc2d8138306ebbffd4f8b710
|
|
If try to move message to Cust1 (number 5)
the function 'save_to_folder' tries to create Greeting folder instead of Cust1.
This patch fixed it by setting GREETINGS_FOLDER = -1
ASTERISK-24927 #close
Change-Id: I03d1a761894bcc2d130ec9b003bbcddc28e25c51
|
|
* Added Useragent and RegExpire headers to AMI Event
ContactStatusDetail with associated documentation.
ASTERISK-25903 #close
Change-Id: If3d121e943e588d016ba51d4eb9c6a421a562239
|
|
|
|
|
|
|
|
|
|
The first available transport of the appropriate type is used now.
This patch adds new config option 'transport' for outbound-publish.
If transport is set then outbound PUBLISH requests will use this transport.
ASTERISK-25901 #close
Change-Id: Ib389130489b70e36795b0003fa5fd386e2680151
|
|
ASTERISK-25912 #close
Change-Id: I8e72e6894feaf36c9450f2788d205d07baec23aa
|
|
|
