Age | Commit message (Collapse) | Author |
|
When we fail over to a new target we create a new transaction
and it becomes the current INVITE transaction. This does not
prevent the previous transaction from raising state changes
and causing the session to be prematurely disconnected if a
transport error occurs immediately.
This change backports a fix from PJSIP that eliminates the
incorrect state change and reduces when they would be raised
in the first place.
ASTERISK-27408
Change-Id: Id22d087591782eee31311753d11e7eca4b95ef34
|
|
The approach with having a single global subscription to all extension
state changes has one issue: dynamically created hints don't have any
watchers and are therefore garbage collected on the first dialplan
reload.
This change creates a state subscription for every queue member with a
hint as state_interface, thus increasing the count of watches for
hints, so they are not destroyed prematurely anymore.
There are 2 side effects:
1. The state change callback in app_queue is not executed when
there are no members referring to the extension.
2. The callback is called multiple times for the same hint if it's
associated with more than one queue member.
Reported by: Steven T. Wheeler
ASTERISK-18411 #close
Change-Id: I4956af2136ea2a7f110ac9272eae5f6e676d8f89
|
|
This is a partial fix for ASTERISK~25817 but does not address the
comments regarding RFC 5626.
Change-Id: I227e2d10c0035bbfa1c6e46ae2318fd1122d8420
|
|
Stripping the DNID in a SIP dial string can result in attempting to call
the argument parsing macros on an empty string, causing a crash.
ASTERISK-26131 #close
Reported by: Dwayne Hubbard
Patches:
dw-asterisk-master-dnid-crash.patch (license #6257) patch
uploaded by Dwayne Hubbard
Change-Id: Ib84c1f740a9ec0539d582b09d847fc85ddca1c5e
|
|
Recently menuselect has randomly produced an error stating that
configure was just run and make had to be restarted. I believe this is
due to an incorrect menuselect/Makefile rule. The original rule
produced an error if makeopts or autoconfig.h were older than
makeopts.in or autoconfig.h.in. I believe this can create an issue if
makeopts is older than autoconfig.h.in or if autoconfig.h is older than
makeopts.in. The new rules compare files independently.
Change-Id: Ibca155035fa1392c95e33cbf25f257902abba17b
|
|
This patch does three things associated with the initial incoming INVITE
request URI.
1) Add access to the full initial incoming INVITE request URI.
2) We were not setting DNID on incoming PJSIP channels. The DNID is the
user portion of the initial incoming INVITE Request-URI. The value is
accessed by reading CALLERID(dnid).
3) Fix CHANNEL(pjsip,target_uri) documentation.
* The initial incoming INVITE request URI is now available using
CHANNEL(pjsip,request_uri).
* Set the DNID on PJSIP channel creation so CALLERID(dnid) can return the
initial incoming INVITE request URI user portion.
* CHANNEL(pjsip,target_uri) now correctly documents that the target URI is
the contact URI.
* Refactored print_escaped_uri() out of channel_read_pjsip() to handle
pjsip_uri_print() error condition when the buffer is too small.
ASTERISK-27478
Change-Id: I512e60d1f162395c946451becb37af3333337b33
|
|
Support for these protocols was added in the same commit as the 'proto'
field, so we can safely use the same ./configure check.
For reference: https://trac.pjsip.org/repos/changeset/4968
Change-Id: Icf4975d785d6bfb8f30ac7ffa695a0adf9382dac
|
|
Change-Id: I51f6945c4023cb93fc7b87be5ab4c50e9e6ee27d
|
|
Handle CLI initialization before any processing occurs.
Change-Id: I598b911d2e409214bbdfd0ba0882be1d602d221c
|
|
Change-Id: Ib8d45bbdfbda81e65045f6dff874d189b74e5471
|
|
|
|
|
|
|
|
|
|
|
|
ASTERISK-27475 #close
Change-Id: If7384bc6ed002ef140dec69798d14c52b7cfd800
|
|
|
|
|
|
Use the new ast_cli_completion_add() function to improve completion
performance for commands like 'pjsip show endpoint.'
Change-Id: I76d802294d2ac1766110dc75f7d117c8541ce348
|
|
Using the LIKE operator requires a full table scan of 'astdb', whereas a
comparison operation is able to use the primary key index.
This patch adds a new function to the AstDB API for quick prefix matches
and updates res_sorcery_astdb to utilize it. This showed substantial
performance improvement in my test environment.
Related to ASTERISK~26806, but does not completely resolve it.
Change-Id: I7d37f9ba2aea139dabf2ca72d31fbe34bd9b2fa1
|
|
Optimize resource_name_match. This change eliminates use of
ast_strdupa, instead verifying that both basename's are the same length,
then using strncasecmp.
Change-Id: I477275c0e954c99d74be5abfc8bb6545b04e5a3d
|
|
Change-Id: I25348c386a222bb704aff07f54375108a6402906
|
|
There are many places in the code base where we ignore the return value
of fcntl() when getting/setting file descriptior flags. This patch
introduces a convenience function that allows setting or clearing file
descriptor flags and will also log an error on failure for later
analysis.
Change-Id: I8b81901e1b1bd537ca632567cdb408931c6eded7
|
|
res_stasis was missing AST_MODFLAG_LOAD_ORDER. Set res_stasis and
res_speech to start at (AST_MODPRI_APP_DEPEND - 1) so they are ready for
dependent modules.
Change-Id: I27f4f3810a95b6be8a5bfbf62be2ace6bfab6ff3
|
|
For both dynamic and static contacts it was possible that potential AOR
changes were not being applied to all contacts. This was because the qualify
and schedule code was only retrieving AOR's, and contacts with frequencies
greater than zero.
For instance the following could happen: and AOR/contact has a frequency of 5,
it then gets set to 0, and then a reload occurs. All scheduled OPTIONS are
stopped, a list of AOR's is retrieved with frequency > 0, but none are
selected since in this scenario all are 0. The contact for the one previously
set to 5 though does not get updated, so it's status remains "AVAILABLE".
This patch makes it so all contacts (static and dynamic) are selected, and
appropriately updated if need be.
ASTERISK-27467 #close
Change-Id: I7a920170f89c683af9505d4723a44fc6841decdb
|
|
Dynamic contacts were not being properly updated on reload. As a matter of
fact any changes to the AOR that a dynamic contact was associated with were
not being applied.
On reload, this patch makes it so for each dynamic contact, the associated
AOR is now retrieved and the AOR's fields are applied to the contact.
ASTERISK-27467
Change-Id: I8e3165dc6a745218c1c9db837f77fafa0516985d
|
|
|
|
|
|
|
|
|
|
Duplicate checking was done incorrectly when parsing completion options
from a remote console causing all options to be ignored as duplicates.
Once fixed I had to separate processing of the best match to ensure it
was not identified as a duplicate when it is the only match.
ASTERISK-27465
Change-Id: Ibbdb29f88211742071836c9b3f4d2aa1221cd0f9
|
|
Change-Id: I1e5eef4029cba56e33d786c5a5ade8091e531a1e
|
|
The sounds index is rebuilt each time a format is registered or
unregistered. This causes the index to be repeatedly rebuilt during
startup and shutdown.
This patch significantly reduces the work done by delaying sound index
initialization until after modules are loaded. This way a reindex only
occurs if a format module is loaded after startup. We also skip
reindexing when format modules are unloaded during shutdown.
Change-Id: I585fd6ee04200612ab1490dc804f76805f89cf0a
|
|
This eliminates some wasteful operations in media_index startup.
* Replace statically set string-fields with char[0].
* Eliminate pointless RAII_VAR's.
* alloc_variant: Avoid pointless ao2_find on new info->variant.
* Stop trying find_variant before alloc_variant.
* process_media_file: replace ast_str with ast_asprintf. This avoids
reallocation of file_id_str.
Overall sounds_index.c is about 27% of Asterisk startup time when using
sample configs. This patch reduces it to 20%. This is a half-fix. The
real problem is that the media_index is regenerated repeatedly - 68
times in my test.
Change-Id: Ia50b752f8efb356f852b05c4be495a6631af8652
|
|
Setting channel variables with the AMI Originate action caused a deadlock
when you set CDR(amaflags) or CDR(accountcode). This path has the channel
locked when the CDR function is called. The CDR function then
synchronously passes the job to a stasis thread. The stasis handling
function then attempts to lock the channel. Deadlock results.
* Avoid deadlock by making the CDR function handle setting amaflags and
accountcode directly on the channel rather than passing it off to the CDR
processing code under a stasis thread to do it.
* Made the CHANNEL function and the CDR function process amaflags the same
way.
* Fixed referencing the wrong message type in cdr_prop_write().
ASTERISK-27460
Change-Id: I5eacb47586bc0b8f8ff76a19bd92d1dc38b75e8f
|
|
* Added start DTMF transfer verbose messages.
* Made associated transfer messages use a similar message format.
* Adjusted message verbose level as requested by initial reporter.
ASTERISK-27449
Change-Id: I2045714586414b3c5ef1f3cc56c1c4af4b31f551
|
|
|
|
|
|
|
|
|
|
* Add the channel name to diagnostic messages so you will know which
channel failed to transfer.
* Promoted some debug messages to verbose 4 messages.
ASTERISK-27449 #close
Change-Id: Idac66b7628c99379cc9269158377fd87dc97a880
|
|
The SuccessfulAuth using_password field was declared as a pointer to a
uint32_t when the field was later read as a uint32_t value. This resulted
in unnecessary casts and a non-portable field value reinterpret in
main/security_events.c:add_json_object(). i.e., It would work on a 32 bit
architecture but not on a 64 bit big endian architecture.
Change-Id: Ia08bc797613a62f07e5473425f9ccd8d77c80935
|
|
Currently, when the app_voicemail sending VoicemailUserEntry AMI event, there's
no OldMessageCount info for default.
To check the OldMessageCount info, it required IMAP_STORAGE define, but this is
not correct.
Added OldMessageCount item as a default.
ASTERISK-27456
Change-Id: I5c71521c2d1daf8b7b161e31c34d28cca6aea4c7
|
|
|
|
More complicated direct media reinvite negotiations can result in longer
delays before direct media flows. The strictrtp learning timeout time
was too short. One log showed that the first RTP packet came in just
after three seconds.
* Increase the strictrtp learning timeout time from 1.5 to 5 seconds.
ASTERISK-27453
Change-Id: Ic5e711164cbb91b4d1c1e40c83697755640f138c
|
|
|
|
|
|
|
|
With Asterisk 12 (commit 866d968), the default of "icesupport" changed to
- "yes" in the module "res_rtp_asterisk" and
- "no" in the module "chan_sip".
The latter was reflected in the sample configuration file for "sip.conf". The
former did not make it into "rtp.conf.sample".
ASTERISK-20643
Change-Id: I2a2e0a900455d0767a99ea576e30adc6d7608a36
|
|
|