| Age | Commit message (Collapse) | Author |
|---|
|
|
|
|
|
|
|
|
|
|
|
packet is DTLS."
|
|
|
|
If an ISDN call is hungup by both sides at the same time a crash could
happen.
* Added missing NULL checks for the owner channel after calling
pri_queue_pvt_cause_data() in two places. Code after those calls need to
check the owner channel pointer for NULL before use because
pri_queue_pvt_cause_data() needs to do deadlock avoidance to lock the
owner and the owner may get hung up.
ASTERISK-21893 #close
Reported by: Alexandr Gordeev
Change-Id: Ica3e266ebc7a894b41d762326f08653e1904bb9a
|
|
|
|
|
|
Previous versions of Asterisk processed command-line options before
processing asterisk.conf. This meant that if an option was set in
asterisk.conf, it could not be overridden with the equivelent command
line option. This change causes Asterisk to process the command-line
twice. First it processes options that are needed to load asterisk.conf,
then it processes the remaining options after the config is read.
This changes the function of -X slightly. Previously using -X without
disabling execincludes in asterisk.conf caused #exec to be usable in any
config. Now -X only enables #exec for the load of asterisk.conf, if it
is wanted in the rest of the system it must be enabled with execincludes
in asterisk.conf. Updated 'asterisk -h' and 'man asterisk' to reflect
the limited function of -X.
ASTERISK-25042 #close
Reported by: Corey Farrell
Change-Id: I1450d45c15b4467274b871914d893ed4f6564cd7
|
|
The code which reads asterisk.conf supports processing the debug
option with ast_true, but ast_true returns -1. This causes debug
to still be off, convert to 1 so debug will be on as requested.
ASTERISK-25042
Reported by: Corey Farrell
Change-Id: I3c898b7d082d914b057e111b9357fde46bad9ed6
|
|
MAKE_MENUSELECT currently sets CC to CC, which is the compiler for the
target platform. But menuselect is to be run on the build system, so
BUILD_CC needs to be used instead - like it was in the past, before the
recent changes (https://reviewboard.asterisk.org/r/4370/). This is the
patch for ASTERISK-25074.
ASTERISK-25074 #close
Reported by: Sebastian Kemper
Tested by: Sebastian Kemper
Change-Id: I8a2b1fc5deb6ad2b80f49baca35b1b13d468ebf8
|
|
|
|
The code previously used a fixed size of 512 for the SQL
queries. Depending on the size this may require it to grow.
This change makes it so if the buffer size does grow the size
is stored and next time the buffer will be large enough.
Change-Id: I55385899f1c06dee47e4274c2d21538037b2d895
|
|
|
|
non-zero."
|
|
Based on feedback from Corey Farrell and Y Ateya, a few new
macros have been added...
AST_VECTOR_REMOVE which takes a parameter to indicate if
order should be preserved.
AST_VECTOR_ADD_SORTED which adds an element to
a sorted vector.
AST_VECTOR_RESET which cleans all elements from the vector
leaving the storage intact.
Change-Id: I41d32dbdf7137e0557134efeff9f9f1064b58d14
|
|
pbx_spool used to delete/move the call file upon successful outgoing
call completion, but did not delete it from in-memory list of files
(dirlist, used only when compiled with inotify/kqueue support).
That resulted in an extra attempt to process that filename after
retrytime seconds.
Then, if a new file with the same name appears that is scheduled
in future further than the completed one plus its retrytime,
then it gets executed earlier than expected.
This patch fixes remove_from_queue function to also remove the entry
from the dirlist.
ASTERISK-17069 #close
Reported by: Jeremy Kister
ASTERISK-24442 #close
Reported by: tootai
Change-Id: If9ec9b88073661ce485d6b008fd0b2612e49a28b
|
|
|
|
|
|
Use function PQescapeStringConn for escaping the name
of the table and schema instead of doing it manually.
Change-Id: I6709165e2d00463e9c813d24f17830ad4910b599
|
|
|
|
First byte of DTLS packet shall be in range 20-63, not 20-64. Refer to RFC
https://tools.ietf.org/html/rfc5764#section-5.1.2 for correct values.
Change-Id: Iae6fa0d72b37c36a27fe40686e0ae6fba3afec31
|
|
The DNS SRV sorting code currently has an issue when records with a priority
of zero exist with records of a non-zero priority. This occurs because the
sorting code considers zero to mean unset when in reality is a valid
value. If the current priority is zero it will get replaced with any remaining
record that has a priority of non-zero, until no records of those exist after
which the records of priority zero are handled.
This change makes it so that the priority of the first remaining record is
the current starting priority. There is also a small optimization to prevent
iterating records when the starting priority is already zero.
Change-Id: I103511f35b50428f770bd4db3ffef70fb6f82d35
|
|
|
|
|
|
MySQL configuration engine contains a bug in require_mysql(). This
function is used for column type checking in tables. This bug only
affects DATETIME, DATE and FLOAT types.
It came from mixing the first condition (switch-case-like
if/then/else), to check the expected column type, with the second
condition, to check the actual column type against the expected column
type. Both conditions must be checked separately in order to avoid the
execution of the wrong block.
ASTERISK-18252 #comment This patch might fix the issue
Reported by: Gareth Blades
ASTERISK-25041 #close
Reported by: Alexandre Fournier
Tested by: Alexandre Fournier
Change-Id: I0b8bf7e68ab938be8e6525a249260cb648cb0bfa
|
|
The main IVR was playing demo-congrats. I've switched it over to the
basic-pbx-ivr-main file that we added in core sounds 1.4.27. This prompt
has Allison prompting the user with the actual IVR menu.
ASTERISK-24892 #close
Change-Id: Ifb749616ff8e156a1031ddaddfcc9244767a095d
|
|
astmm.h includes defines that are meant to cause error's when standard
allocators (malloc, calloc, free, etc) are used. It actually only
causes a warning, which is not always caught on certain sources. In
modules this unknown symbol is not detected until runtime, where the
module fails to load. This modifies the define's so that using one
of the blocked functions will cause a compile error regardless of
CFLAGS.
Moved spandsp header includes to before asterisk.h so the static inline
functions can continue using malloc and free. Although these functions
are never called and optimized away, the updated replacement macro's
would still cause a failure.
Change-Id: I532640aca0913ba9da3b18c04a0f010ca1715af5
|
|
While trying to get WebRTC working with chan_pjsip, I was running
into the following error:
Attempted to set an invalid DTLS-SRTP configuration on RTP
instance...
Josh helpfully pointed out that res_srtp.so might not be loaded, and
sure enough, it wasn't. This patch adds a ERROR indiciating as much
to hopefully help others having a similar problem.
Change-Id: I13aa477b47b299876728a21b130998a0ea6cd19f
|
|
|
|
Added the necessary lines to the Makefile and sounds.xml so we'll have the
Swedish sounds in all available formats in menuselect.
See also: Swedish sounds were added into the core sounds release 1.4.27.
ASTERISK-24744 #close
Reported by: Tove Hjelm
Tested by: Rusty Newton
Change-Id: Ib6f4fd177afd1667b2402735034001d4d055a908
|
|
This switches codecs/lpc10/lpcini.c back to including "asterisk.h"
instead of <stdlib.h>. lpcini.c allocates memory that is freed by
codec_lpc10.c, so it is important to use MALLOC_DEBUG allocator.
Added #define WRAP_LIBC_MALLOC to the start of the source to prevent
runtime symbol link error's.
Change-Id: I74f63fd09fdeb673ee7753122c3bb4722ab6e1ac
|
|
Moved contrib/asterisk-ng-doxygen to doc/asterisk-ng-doxygen.in
Changed /Makefile to copy asterisk-ng-doxygen.in to
asterisk-ng-doxygen then modify it with version instead of
modifying asterisk-ng-doxygen directly. Updated clean
targets as well.
Updated /.gitignore and doc/.gitignore.
Change-Id: I38712d3e334fa4baec19d30d05de8c6f28137622
|
|
termination"
|
|
* Added a lookbehind to one-line comment matcher to skip escaped
semicolons.
* Added support for block comments.
Change-Id: Id17dfaeda8ed4be572e8107a0c010066584aaee7
|
|
|
|
The res_pjsip_exten_state module currently has a race condition between
processing the extension state callback from the PBX core and processing
the subscription shutdown callback from res_pjsip_pubsub. There is currently
no synchronization between the two. This can present a problem as while
the SIP subscription will remain valid the tree it points to may not.
This is in particular a problem as a task to send a NOTIFY may get queued
which will try to use the tree that may no longer be valid.
This change does the following to fix this problem:
1. All access to the subscription tree is done within the task that
sends the NOTIFY to ensure that no other thread is modifying or
destroying the tree. This task executes on the serializer for the
subscriptions.
2. A reference to the subscription serializer is kept to ensure it
remains valid for the lifetime of the extension state subscription.
3. The NOTIFY task has been changed so it will no longer attempt
to send a NOTIFY if the subscription has already been terminated.
ASTERISK-25057 #close
Reported by: Matt Jordan
Change-Id: I0b3cd2fac5be8d9b3dc5e693aaa79846eeaf5643
|
|
|
|
|
|
* changes:
CLI: Enable automatic references to modules.
Modules: Make ast_module_info->self available to auxiliary sources.
|
|
|
|
|
|
transfer."
|
|
After using the new vector stuff for real I found...
A bug in AST_VECTOR_INSERT_AT that could cause a seg fault.
The callbacks needed to be closer to ao2_callback in behavior
WRT to CMP_MATCH and CMP_STOP behavior and the ability to return
a vector of matched entries.
A pre-existing issue with APPEND and REPLACE was also fixed.
I also added a new macro to test.h that acts like ast_test_validate
but also accepts a return code variable and a cleanup label. As well
as printing the error, it sets the rc variable to AST_TEST_FAIL and
does a goto to the specified label on error. I had a local version
of this in test_vector so I just moved it.
ASTERISK-25045
Change-Id: I05e5e47fd02f61964be13b7e8942bab5d61b29cc
|
|
Creating a snoop channel in ARI and spying only on a single direction (in or
out) results in CPU utilization continually increasing until the CPU is fully
consumed. This occurs because frames are being put in the opposing direction's
slin factory queue, but not being removed.
Fixed the problem by always reading and disposing of frames from the opposite
queue of the direction selected.
ASTERISK-24938 #closes
Change-Id: I935bfd15f1db958f364d9d6b3b45582c0113dd60
|
|
ASTERISK-25034
Reported by: Richard Mudgett
Change-Id: I1ff8f02124d2f4abd632a050da52c64285bb7f30
|
|
|
|
|
