summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-12-15aco: Minimize use of regex.Corey Farrell
Remove nearly all use of regex from ACO users. Still remaining: * app_confbridge has a legitamate use of option name regex. * ast_sorcery_object_fields_register is implemented with regex, all callers use simple prefix based regex. I haven't decided the best way to fix this in both 13/15 and master. Change-Id: Ib5ed478218d8a661ace4d2eaaea98b59a897974b
2017-12-15aco: Create ways to minimize use of regex.Corey Farrell
ACO uses regex in many situations where it is completely unneeded. In some cases this doubles the total processing performed by aco_process_config. * Create ACO_IGNORE category type for use in place of skip_category regex source string. * Create additional aco_category_op values to allow specifying category filter using either a single plain string or a NULL terminated array of plain strings. * Create ACO_PREFIX to allow matching option names to case insensitive prefixes. Change-Id: I66a920dcd8e2b0301f73f968016440a985e72821
2017-12-14Merge "pjsip: Ignore state changes from old transactions."Jenkins2
2017-12-14Merge "configs: Comment out and change IP of iax.conf [demo]"Jenkins2
2017-12-14Merge "res_pjsip_session: Reinvite using active stream topology if none ↵Jenkins2
requested."
2017-12-14res_pjsip_sdp_rtp: Add NULL check in add_crypto_to_streamGeorge Joseph
add_crypto_to_stream wasn't checking for a NULL session->inv_session->neg before calling pjmedia_sdp_neg_get_state. This was causing a crash if the negotiation hadn't already been completed and asterisk was compiled with --enable-dev-mode. Change-Id: I57c6229954a38145da9810fc18657bfcc4d9d0c9
2017-12-14configs: Comment out and change IP of iax.conf [demo]Sean Bright
This no longer appears to exist, so no sense in causing confusion. ASTERISK-27175 #close Reported by: Tzafrir Cohen Change-Id: Idde967924c69f6a741dc9a5ab7dacb44d22cf100
2017-12-14Merge "menuselect: Tweak check for recently run configure."Joshua Colp
2017-12-14Merge "README: Remove outdated references to tex docs"Joshua Colp
2017-12-14Merge "Add new AMI action for app_voicemail"Joshua Colp
2017-12-14Merge "chan_sip: 3PCC patch for AMI "SIPnotify""Joshua Colp
2017-12-13Merge "pjsip_options: contacts sometimes not being updated on reload"Kevin Harwell
2017-12-13Merge "res_pjsip: Assign support levels to a few modules"Jenkins2
2017-12-13README: Remove outdated references to tex docsGeorge Joseph
Added links to the wiki to replace references to outdated tex docs. ASTERISK-27430 Reported by: Corey Farrell Change-Id: I5007e732b30bc7b63d124c530ae8857c89991209
2017-12-13Merge "pjsip_options: dynamic contact's fields not updated on reload"Jenkins2
2017-12-13Merge "CLI: Fix 'core show sysinfo' function ordering."George Joseph
2017-12-13Merge "chan_pjsip/res_pjsip: Add CHANNEL(pjsip,request_uri)"Joshua Colp
2017-12-13Add new AMI action for app_voicemailpchero
Currently, to figure out specified voicemail's status, there's only one way to do it, which is use a VoicemailUserEntry AMI message. But it consumed it too much resource(it check everything). So, added new AMI action. ASTERISK-27470 Change-Id: Ie4eba1424a142e5fbd1d9fb1821a3fc1a1e238b7
2017-12-13AST-2017-012: Place single RTCP report block at beginning of report.Joshua Colp
When the RTCP code was transitioned over to Stasis a code change was made to keep track of how many reports are present. This count controlled where report blocks were placed in the RTCP report. If a compound RTCP packet was received this logic would incorrectly place a report block in the wrong location resulting in a write to an invalid location. This change removes this counting logic and always places the report block at the first position. If in the future multiple reports are supported the logic can be extended but for now keeping a count serves no purpose. ASTERISK-27382 ASTERISK-27429 Change-Id: Iad6c8a9985c4b608ef493e19c421211615485116
2017-12-13Merge "chan_sip: Don't crash in Dial on invalid destination"Jenkins2
2017-12-13res_pjsip_session: Reinvite using active stream topology if none requested.Joshua Colp
When a connected line update is sent to an endpoint we do not request a specific stream topology to be used. Previously this resulted in the configured stream topology being used which may actually differ from the currently negotiated topology. PJSIP is helpful in this regard in that it will fill in any missing streams with removed ones. This results in our own state not matching the SDP, though, and we do not apply the negotiated SDP. This change tweaks the code to use the actively negotiated stream topology if it is present with a fallback to the configured one. This results in the SDP and the state having matching information and the world is happy. ASTERISK*27397 Change-Id: I7a57117f0183479e6884b7bf3a53bb8c7464f604
2017-12-13Merge "chan_sip: Don't send trailing \0 on keep alive packets"Jenkins2
2017-12-13pjsip: Ignore state changes from old transactions.Joshua Colp
When we fail over to a new target we create a new transaction and it becomes the current INVITE transaction. This does not prevent the previous transaction from raising state changes and causing the session to be prematurely disconnected if a transport error occurs immediately. This change backports a fix from PJSIP that eliminates the incorrect state change and reduces when they would be raised in the first place. ASTERISK-27408 Change-Id: Id22d087591782eee31311753d11e7eca4b95ef34
2017-12-13chan_sip: 3PCC patch for AMI "SIPnotify"Yasuhiko Kamata
A patch for sending in-dialog SIP NOTIFY message with "SIPnotify" AMI action. ASTERISK-27461 Change-Id: I5797ded4752acd966db6b13971284db684cc5ab4
2017-12-12chan_sip: Don't send trailing \0 on keep alive packetsSean Bright
This is a partial fix for ASTERISK~25817 but does not address the comments regarding RFC 5626. Change-Id: I227e2d10c0035bbfa1c6e46ae2318fd1122d8420
2017-12-12chan_sip: Don't crash in Dial on invalid destinationSean Bright
Stripping the DNID in a SIP dial string can result in attempting to call the argument parsing macros on an empty string, causing a crash. ASTERISK-26131 #close Reported by: Dwayne Hubbard Patches: dw-asterisk-master-dnid-crash.patch (license #6257) patch uploaded by Dwayne Hubbard Change-Id: Ib84c1f740a9ec0539d582b09d847fc85ddca1c5e
2017-12-12menuselect: Tweak check for recently run configure.Corey Farrell
Recently menuselect has randomly produced an error stating that configure was just run and make had to be restarted. I believe this is due to an incorrect menuselect/Makefile rule. The original rule produced an error if makeopts or autoconfig.h were older than makeopts.in or autoconfig.h.in. I believe this can create an issue if makeopts is older than autoconfig.h.in or if autoconfig.h is older than makeopts.in. The new rules compare files independently. Change-Id: Ibca155035fa1392c95e33cbf25f257902abba17b
2017-12-12chan_pjsip/res_pjsip: Add CHANNEL(pjsip,request_uri)Richard Mudgett
This patch does three things associated with the initial incoming INVITE request URI. 1) Add access to the full initial incoming INVITE request URI. 2) We were not setting DNID on incoming PJSIP channels. The DNID is the user portion of the initial incoming INVITE Request-URI. The value is accessed by reading CALLERID(dnid). 3) Fix CHANNEL(pjsip,target_uri) documentation. * The initial incoming INVITE request URI is now available using CHANNEL(pjsip,request_uri). * Set the DNID on PJSIP channel creation so CALLERID(dnid) can return the initial incoming INVITE request URI user portion. * CHANNEL(pjsip,target_uri) now correctly documents that the target URI is the contact URI. * Refactored print_escaped_uri() out of channel_read_pjsip() to handle pjsip_uri_print() error condition when the buffer is too small. ASTERISK-27478 Change-Id: I512e60d1f162395c946451becb37af3333337b33
2017-12-12res_pjsip: Add TLSv1.1 and TLSv1.2 supportSean Bright
Support for these protocols was added in the same commit as the 'proto' field, so we can safely use the same ./configure check. For reference: https://trac.pjsip.org/repos/changeset/4968 Change-Id: Icf4975d785d6bfb8f30ac7ffa695a0adf9382dac
2017-12-12res_pjsip: Assign support levels to a few modulesSean Bright
Change-Id: I51f6945c4023cb93fc7b87be5ab4c50e9e6ee27d
2017-12-11CLI: Fix 'core show sysinfo' function ordering.Corey Farrell
Handle CLI initialization before any processing occurs. Change-Id: I598b911d2e409214bbdfd0ba0882be1d602d221c
2017-12-11stasis_channels.c: Don't set channel snapshot caller_dnid twice.Richard Mudgett
Change-Id: Ib8d45bbdfbda81e65045f6dff874d189b74e5471
2017-12-11Merge "codec_opus: Make libcurl a dependency in menuselect"Jenkins2
2017-12-11Merge "astdb: Improve prefix searches in astdb"Jenkins2
2017-12-11Merge "loader: Refactor resource_name_match."Jenkins2
2017-12-11Merge "res_stasis and res_speech: Fix load order."Joshua Colp
2017-12-11Merge "utils: Add convenience function for setting fd flags"Jenkins2
2017-12-11codec_opus: Make libcurl a dependency in menuselectSean Bright
ASTERISK-27475 #close Change-Id: If7384bc6ed002ef140dec69798d14c52b7cfd800
2017-12-11Merge "pjsip: Improve CLI completion performance"Jenkins2
2017-12-11Merge "CDR: Fix deadlock setting some CDR values."Jenkins2
2017-12-10pjsip: Improve CLI completion performanceSean Bright
Use the new ast_cli_completion_add() function to improve completion performance for commands like 'pjsip show endpoint.' Change-Id: I76d802294d2ac1766110dc75f7d117c8541ce348
2017-12-10astdb: Improve prefix searches in astdbSean Bright
Using the LIKE operator requires a full table scan of 'astdb', whereas a comparison operation is able to use the primary key index. This patch adds a new function to the AstDB API for quick prefix matches and updates res_sorcery_astdb to utilize it. This showed substantial performance improvement in my test environment. Related to ASTERISK~26806, but does not completely resolve it. Change-Id: I7d37f9ba2aea139dabf2ca72d31fbe34bd9b2fa1
2017-12-08loader: Refactor resource_name_match.Corey Farrell
Optimize resource_name_match. This change eliminates use of ast_strdupa, instead verifying that both basename's are the same length, then using strncasecmp. Change-Id: I477275c0e954c99d74be5abfc8bb6545b04e5a3d
2017-12-08pjsip_configuration: Add correct file headerSean Bright
Change-Id: I25348c386a222bb704aff07f54375108a6402906
2017-12-08utils: Add convenience function for setting fd flagsSean Bright
There are many places in the code base where we ignore the return value of fcntl() when getting/setting file descriptior flags. This patch introduces a convenience function that allows setting or clearing file descriptor flags and will also log an error on failure for later analysis. Change-Id: I8b81901e1b1bd537ca632567cdb408931c6eded7
2017-12-07res_stasis and res_speech: Fix load order.Corey Farrell
res_stasis was missing AST_MODFLAG_LOAD_ORDER. Set res_stasis and res_speech to start at (AST_MODPRI_APP_DEPEND - 1) so they are ready for dependent modules. Change-Id: I27f4f3810a95b6be8a5bfbf62be2ace6bfab6ff3
2017-12-07pjsip_options: contacts sometimes not being updated on reloadKevin Harwell
For both dynamic and static contacts it was possible that potential AOR changes were not being applied to all contacts. This was because the qualify and schedule code was only retrieving AOR's, and contacts with frequencies greater than zero. For instance the following could happen: and AOR/contact has a frequency of 5, it then gets set to 0, and then a reload occurs. All scheduled OPTIONS are stopped, a list of AOR's is retrieved with frequency > 0, but none are selected since in this scenario all are 0. The contact for the one previously set to 5 though does not get updated, so it's status remains "AVAILABLE". This patch makes it so all contacts (static and dynamic) are selected, and appropriately updated if need be. ASTERISK-27467 #close Change-Id: I7a920170f89c683af9505d4723a44fc6841decdb
2017-12-07pjsip_options: dynamic contact's fields not updated on reloadKevin Harwell
Dynamic contacts were not being properly updated on reload. As a matter of fact any changes to the AOR that a dynamic contact was associated with were not being applied. On reload, this patch makes it so for each dynamic contact, the associated AOR is now retrieved and the AOR's fields are applied to the contact. ASTERISK-27467 Change-Id: I8e3165dc6a745218c1c9db837f77fafa0516985d
2017-12-07Merge "translate: Skip matrix_rebuild during shutdown."Jenkins2
2017-12-07Merge "sounds_index: Avoid repeatedly reindexing."George Joseph
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-05 19:36:50 +0000