| Age | Commit message (Collapse) | Author |
|---|
|
Change-Id: I44220dd369cc151ebf5281d5119d84bb9e54d54e
|
|
Change-Id: I7c076826c2d3c6ae8c923ca73b7a71980cca11f2
|
|
Change-Id: Ib4eb7ef7dcaf93ddc26538f0a498aaf110d7a973
|
|
* Tweaked add_static_payload() to not use magic numbers.
Change-Id: I1719ff0f6d3ce537a91572501eae5bcd912a420b
|
|
* Fix off nominial ref leak of new_type in
ast_rtp_codecs_payloads_set_m_type().
* No need to lock static_RTP_PT_lock in
ast_rtp_codecs_payloads_set_m_type() and
ast_rtp_codecs_payloads_set_rtpmap_type_rate() before the payload type
parameter sanity check.
* No need to create ast_rtp_payload_type ao2 objects with a lock since the
lock is not used.
Change-Id: I64dd1bb4dfabdc7e981e3f61448beac9bb7504d4
|
|
Change-Id: If98139264d5d97427b4685ecbdc54518f725bc43
|
|
Change glue->update_peer() parameter from 0 to NULL to better indicate it
is a pointer.
Change-Id: I8ff2e5087f0e19f6998e3488a712a2470cc823bd
|
|
Two testsuite tests crashed in the same place as a result of an INVITE
being CANCELed.
tests/channels/pjsip/resolver/srv/failover/in_dialog/transport_unspecified
tests/channels/pjsip/resolver/srv/failover/in_dialog/transport_tcp
The session pointer is no longer in the inv->mod_data[session_module.id]
location because the INVITE transaction has reached the terminated state.
ASTERISK-25297 #close
Reported by: Richard Mudgett
Change-Id: Idb75fdca0321f5447d5dac737a632a5f03614427
|
|
|
|
A test agent was continuously failing all ARI tests when run against
Asterisk 13. As it turns out, the reason for this is that on those test
runs, for some reason we decided to use the super extended 64 bit
payload length for websocket text frames instead of the extended 16 bit
payload length. For 64-bit payloads, the expected byte order over the
network is
7, 6, 5, 4, 3, 2, 1, 0
However, we were sending the payload as
3, 2, 1, 0, 7, 6, 5, 4
This meant that we were saying to expect an absolutely MASSIVE payload
to arrive. Since we did not follow through on this expected payload
size, the client would sit patiently waiting for the rest of the payload
to arrive until the test would time out.
With this change, we use the htobe64() function instead of htonl() so
that a 64-bit byte-swap is performed instead of a 32 bit byte-swap.
Change-Id: Ibcd8552392845fbcdd017a8c8c1043b7fe35964a
|
|
This event is necessary for the bridge_wait_e_options test to be able to
confirm that ringing is being played on the local channel that runs the
BridgeWait() application with the e(r) option.
ASTERISK-25292 #close
Reported by Kevin Harwell
Change-Id: Ifd3d3d2bebc73344d4b5310d0d55c7675359d72e
|
|
|
|
Currently, if a blank musiconhold.conf is used, musiconhold will fail
to start for a channel going into a holding bridge with an anticipation
of getting music on hold. That being the case, no frames will be written
to the channel and that can pose a problem for blind transfers in PJSIP
which may rely on frames being written to get past the REFER framehook.
This patch makes holding bridges start a silence generator if starting
music on hold fails and makes it so that if no music on hold functions
are installed that the ast_moh_start function will report a failure so
that consumers of that function will be able to respond appropriately.
ASTERISK-25271 #close
Change-Id: I06f066728604943cba0bb0b39fa7cf658a21cd99
|
|
Due to backwards compatible changes, the ARI version should be bumped to
1.8.0 prior to the release of 13.5.0. Note that a previous patch already
bumped the version of AMI for this release.
Change-Id: I419033bfbbc0d3533a29ccb32b2981f39e0883e7
|
|
This change adds support for the 'rtp_timeout' and 'rtp_timeout_hold'
endpoint options. These allow the channel to be hung up if RTP
is not received from the remote endpoint for a specified number of
seconds.
ASTERISK-25259 #close
Change-Id: I3f39daaa7da2596b5022737b77799d16204175b9
|
|
|
|
Change-Id: I5f62d0c5684f8b2335f9f8ac2d79ee04fbdafb19
|
|
Commit 54b25c80c8387aea9eb20f9f4f077486cbdf3e5d solved an issue where a
specific scenario involving local channels and a native local RTP bridge
could result in ringback still being heard on a calling channel even
after the call is bridged.
That commit caused many tests in the testsuite to fail with alarming
consequences, such as not sending DialBegin and DialEnd events, and
giving incorrect hangup causes during calls.
This commit reverts the previous commit and implements and alternate
solution. This new solution involves only passing AST_CONTROL_RINGING
frames across local channels if the local channel is in AST_STATE_RING.
Otherwise, the frame does not traverse the local channels. By doing
this, we can ensure that a playtones generator does not get started on
the calling channel but rather is started on the local channel on which
the ringing frame was initially indicated.
ASTERISK-25250 #close
Reported by Etienne Lessard
Change-Id: I3bc87a18a38eb2b68064f732d098edceb5c19f39
|
|
|
|
|
|
Previous changes to sample rate support in audiohooks accidentally
removed code responsible for allowing the manipulate audiohooks
to work. Without this code the manipulated frame would be dropped
and not used. This change restores it.
ASTERISK-25253 #close
Change-Id: I3ff50664cd82faac8941f976fcdcb3918a50fe13
|
|
Control frames with a -1 payload are used as a special signal to stop
playtones generators on channels. This indication is sent both by
app_dial as well as by ast_answer() when a call is answered in case any
tones were being generated on a calling channel.
This control frame type was made to stop traversing local channel pairs
as an optimization, because it was thought that it was unnecessary to
send these indications, and allowing such unnecessary control frames to
traverse the local channels would cause the local channels to optimize
away less quickly.
As it turns out, through some special magic dialplan code, it is
possible to have a tones being played on a non-local channel, and it is
important for the local channel to convey that the tones should be
stopped. The result of having tones continue to be played on the
non-local channel is that the tones play even once the channel has been
bridged. By not blocking the -1 control frame type, we can ensure that
this situation does not happen.
ASTERISK-25250 #close
Reported by Etienne Lessard
Change-Id: I0bcaac3d70b619afdbd0ca8a8dd708f33fd2f815
|
|
Due to changes in audiohooks to support different sample rates the
underlying storage of samples is in the format of the audiohook
itself and not of the format being requested. This means that if a
channel is using G722 the samples stored will be at 16kHz. If
something subsequently reads from the audiohook at a format which
is not the same sample rate as the audiohook the number of samples
needs to be adjusted.
Given the following example:
1. Channel writing into audiohook at 16kHz (as it is using G722).
2. Chanspy reading from audiohook at 8kHz.
The original code would read 160 samples from the audiohook for
each 20ms of audio. This is incorrect. Since the audio in the
audiohook is at 16kHz the actual number needing to be read is 320.
Failure to read this much would cause the audiohook to reset
itself constantly as the buffer became full.
This change adjusts the requested number of samples by determining
the duration of audio requested and then calculating how many
samples that would be in the audiohook format.
ASTERISK-25247 #close
Change-Id: Ia91ce516121882387a315fd8ee116b118b90653d
|
|
func_cdr.c" into 13
|
|
* In sip.conf.sample fix sentence where we said that WS or WSS are supported
transports for use in an outbound register definition. They are not
supported in that case.
* In func_cdr.c made it clear that the Disable option for CDR_PROP can be used
to enable CDR on a channel.
ASTERISK-24867 #close
Reported by: Rusty Newton
ASTERISK-24853 #close
Reported by: PSDK
Change-Id: I3d698bc6302b9d00a0a995b5c4ad9a42d69b48ca
|
|
This adds an "rtp_keepalive" option for PJSIP endpoints. Similar to the
chan_sip option, this specifies an interval, in seconds, at which we
will send RTP comfort noise frames. This can be useful for keeping RTP
sessions alive as well as keeping NAT associations alive during lulls.
ASTERISK-25242 #close
Reported by Mark Michelson
Change-Id: I06660ba672c0a343814af4cec838e6025cafd54b
|
|
received." into 13
|
|
|
|
variable." into 13
|
|
Change-Id: Ifdfbd0b97cf31478d29923ec30aabce28d01740b
|
|
Misconfiguring sorcery.conf with a 'config' wizard with no extra data
will currently crash Asterisk on startup, as the wizard requires a comma
delineated list to parse. This patch updates res_sorcery_config to check
for the presence of the data before it starts manipulating it.
Change-Id: I4c97512e8258bc82abe190627a9206c28f5d3847
|
|
|
|
Receipt of an RTP packet currently causes the formats on an PJSIP channel to
change to the format of the RTP packet. In some off-nominal cases it's possible
for this to be a format that has not been configured or negotiated. This change
makes it so only formats explicitly configured on the endpoint are allowed.
ASTERISK-25258 #close
Change-Id: If93d641fb6418a285928839300d7854cab8c1020
|
|
In channels/sig_pri.h, struct sig_pri_span, the field
force_restart_unavailable_chans is only defined if
#if defined(HAVE_PRI_MCID) is true.
All other occurences of force_restart_unavailable_chans are outside of the
#if defined(HAVE_PRI_MCID)
endif
scope.
ASTERISK-25257 #close
Reported by: Patric Marschall
Change-Id: I071de89cc2cd0d85927a013036e235851f672549
|
|
ASTERISK-25256 #close
Reported by: Richard Mudgett
Change-Id: I0b6be720b66fa956f6a798cd22ef8934eb0c0ff3
|
|
|
|
|
|
This patch adds support for push configuration of dynamic, i.e.,
sorcery, objects in Asterisk. It adds three new REST API calls to the
'asterisk' resource:
* GET /asterisk/{configClass}/{objectType}/{id}: retrieve the current
object given its ID. This returns back a list of ConfigTuples, which
define the fields and their present values that make up the object.
* PUT /asterisk/{configClass}/{objectType}/{id}: create or update an
object. A body may be passed with the request that contains fields to
populate in the object. The same format as what is retrieved using
the GET operation is used for the body, save that we specify that the
list of fields to update are contained in the "fields" attribute.
* DELETE /asterisk/{configClass}/{objectType}/{id}: remove a dynamic
object from its backing storage.
Note that the success/failure of these operations is somewhat
configuration dependent, i.e., you must be using a sorcery wizard that
supports the operation in question. If a sorcery wizard does not support
the create or delete mechanisms, then the REST API call will fail with a
403 forbidden.
ASTERISK-25238 #close
Change-Id: I28cd5c7bf6f67f8e9e437ff097f8fd171d30ff5c
|
|
sip_session_defer_termination_stop_timer()." into 13
|
|
|
|
message." into 13
|
|
Fixes for issues with the ASTERISK-24934 patch.
* Fixed ast_escape_alloc() and ast_escape_c_alloc() if the s parameter is
an empty string. If it were an empty string the functions returned NULL
as if there were a memory allocation failure. This failure caused the AMI
VarSet event to not get posted if the new value was an empty string.
* Fixed dest buffer overwrite potential in ast_escape() and
ast_escape_c(). If the dest buffer size is smaller than the space needed
by the escaped s parameter string then the dest buffer would be written
beyond the end by the nul string terminator. The num parameter was really
the dest buffer size parameter so I renamed it to size.
* Made nul terminate the dest buffer if the source string parameter s was
an empty string in ast_escape() and ast_escape_c().
* Updated ast_escape() and ast_escape_c() doxygen function description
comments to reflect reality.
* Added some more unit test cases to /main/strings/escape to cover the
empty source string issues.
ASTERISK-25255 #close
Reported by: Richard Mudgett
Change-Id: Id77fc704600ebcce81615c1200296f74de254104
|
|
Change-Id: I8797238c71563e243c48c6145b4f1ae58f91f775
|
|
setup_park_common_datastore() was assuming that a non-NULL string returned
for the ATTENDEDTRANSFER and BLINDTRANSFER channel variables are not empty
strings. Things got crashy as a result.
* Made setup_park_common_datastore() treat the channel variable values the
same whether they are NULL or empty for ATTENDEDTRANSFER and
BLINDTRANSFER.
ASTERISK-25254 #close
Reported by: Richard Mudgett
Change-Id: I9a9c174b33f354f35f82cc6b7cea8303adbaf9c2
|
|
Change-Id: I9e115dee74bd72e06081d0ee73ecdeb886caa5fb
|
|
Change-Id: I742aeeaf5f760593f323a00fb691affe22e35743
|
|
Change-Id: I09928297927ee85f7655289acee3a586816466bc
|
|
|
|
|
|
Last time I checked, it's "Sangoma", not "Samgoma". Thanks to Brian
(GameGamer43) for pointing that out.
Change-Id: I43d7b196f6d7a2b2517b84915e3a8dfbc2894106
|
