Age | Commit message (Collapse) | Author |
|
* Add 'check-alembic' target to root Makefile.
* Create build_tools/make_check_alembic to do the actual checks.
ASTERISK-25685
Change-Id: Ibb3cae7d1202ac23dc70b0f3b5801571ad46b004
|
|
ASTERISK-25712 #close
Reported by: Richard Mudgett
Change-Id: I70634df24f8c6c3a2c66c45af61d021e4999253f
|
|
|
|
Dump the res_pjsip endpt internals.
In non-developer mode we will not document or make easily accessible the
"details" option even though it is still available. The user has to know
it exists to use it. Presumably they would also be aware of the potential
crash warning below.
Warning: PJPROJECT documents that the function used by this CLI command
may cause a crash when asking for details because it tries to access all
active memory pools.
Change-Id: If2d98a3641c9873364d1daaad971376311aef3cb
|
|
|
|
|
|
|
|
Make sure buf[res] is not accessed at res=-1 (buffer underrun).
Address Sanitizer will complain about this quite loudly.
ASTERISK-24801 #close
Change-Id: Ifcd7f691310815a31756b76067c56fba299d3ae9
|
|
res_pjsip_log_forwarder has been renamed to res_pjproject
and enhanced as follows:
As a follow-on to the recent 'Add CLI "pjsip show buildopts"' patch,
a new ast_pjproject_get_buildopt function has been added. It
allows the caller to get the value of one of the buildopts.
The initial use case is retrieving the runtime value of
PJ_MAX_HOSTNAME to insure we don't send a hostname greater
than pjproject can handle. Since it can differ between
the version of pjproject that Asterisk was compiled against
and the version of pjproject that Asterisk is running against,
we can't use the PJ_MAX_HOSTNAME macro directly in Asterisk
source code.
Change-Id: Iab6e82fec3d7cf00c1cf6185c42be3e7569dee1e
|
|
and billsec"
|
|
|
|
When CDRs were refactored, func_cdr's ability to report high precision values
for duration and billsec (the 'f' option) was broken. This was due to func_cdr
incorrectly interpreting the duration/billsec values provided by the CDR engine
in milliseconds, as opposed to seconds. Since the CDR engine only provides
duration and billsec in seconds, and does not expose either attribute with
sufficient precision to merely pass back the underlying value, this patch fixes
the bug by re-calculating duration and billsec with microsecond precision based
on the start/answer/end times on the CDR.
ASTERISK-25179 #close
Change-Id: I8bc63822b496537a5bf80baf6102c06206bee841
|
|
Change-Id: I56240f537fb3205672cdb2a74f0591ae7bb73dbc
|
|
This change makes the thread_timeout_thrash unit test wait for
each task to complete. This fixes the problem where the test would
prematurely end when all threads were gone and a new one had to be
started to handle the last task. It also increases the thrasing as
it is now more likely for each task to encounter the above scenario.
This also fixes a memory leak where the data for each task was not
being freed.
ASTERISK-25611 #close
Change-Id: I5017d621a4dc911f509074c16229b86bff2fb3c6
|
|
|
|
Change-Id: I4892d6acbb580d6c207d006341eaf5e0f8f2a029
|
|
You have to call ast_taskprocessor_unref() outside of the taskprocessor
implementation code. Taskprocessor use since v12 has become more
transient than just the singleton uses in earlier versions.
Change-Id: If7675299924c0cc65f2a43a85254e6f06f2d61bb
|
|
Change-Id: I64ed21fec50eb833641ca49d92184f6aaabd86e8
|
|
This removes logchannels locking from init_logger_chain, puts the
responsibility on the caller. Adds locking around the one call that was
missing it.
ASTERISK-24833
Change-Id: I6cc42117338bf9575650a67bcb78ab1a33d7bad8
|
|
When the Asterisk is restared is not preseved reason paused of members.
This patch fixed this cases, retain data on astdb and set when Asterisk
is started.
ASTERISK-25732 #close
Report by: Rodrigo Ramírez Norambuena
Change-Id: Id3fb744c579e006d27cda4a02334ac0e4bed9eb5
|
|
|
|
Change-Id: I5387821f29e5caa0cba0b7d62b0fc0d341e7e20b
|
|
|
|
|
|
|
|
|
|
Update the version number in the comments from Asterisk 12 to Asterisk 12+
Change-Id: Ie692ac8cda3c993c3bf10f27f51a1cca3317ec7b
|
|
Corrects the qualify_timeout column type from Integer to Decimal
ASTERISK-25686 #close
Reported-by: Marcelo Terres
Change-Id: I757d0e3c011ee9be6cd5abd48bc92441a405d3c8
|
|
hangs up"
|
|
|
|
|
|
ASTERISK-25700 #close
Change-Id: I096da84f9c62c6095f68bcf98eac4b7c7868e808
|
|
The xferfailsound was read from the channel at the beginning of the transfer,
and that value is "cached" for the duration of the transfer. Therefore, changing
the xferfailsound on the channel using the FEATURE() dialplan function does
nothing once the transfer is under way.
This makes it so the transfer code instead gets the xferfailsound configuration
options from the channel when it is actually going to be used.
This patch also fixes a potential memory leak of the props object as well as
making sure the condition variable gets initialized before being destroyed.
ASTERISK-25696 #close
Change-Id: Ic726b0f54ef588bd9c9c67f4b0e4d787934f85e4
|
|
Change-Id: Id5bd18ef1f60ef8be453e677e98478298358a9d1
|
|
* Add freed regions totals to allocations and summary.
* Add totals for all allocations and not just the selected allocations.
Change-Id: I61d5a5112617b0733097f2545a3006a344b4032a
|
|
If the attended transfer destination answers (picks call up or goes to
voicemail) and then hangs up on the transferer then transferer hears the
fail sound.
This patch makes it so the fail sound is not played when the transfer
destination/target hangs up after answering.
ASTERISK-25697 #close
Change-Id: I97f142fe4fc2805d1a24b7c16143069dc03d9ded
|
|
Asterisk uses a Makefile macro to associate additional sources with a
module. This macro is responsible for creating clean targets but
previously left behind *.gcna and *.gcno files.
ASTERISK-25683 #close
Reported by yaron nahum
Change-Id: Idc0823fe80a25c42cefae901fde875e9fc38d8ea
|
|
Adding help text documentation for:
* hangupsource
* appname
* appdata
* exten
* context
* channame
* uniqueid
* linkedid
ASTERISK-24097 #close
Reported by: Steven T. Wheeler
Tested by: Rusty Newton
Change-Id: Ib94b00568b0433987df87d5b67ea529b5905754d
|
|
|
|
Added new global option (regcontext) to pjsip. When set, Asterisk will
dynamically create and destroy a NoOp priority 1 extension
for a given endpoint who registers or unregisters with us.
ASTERISK-25670 #close
Reported-by: Daniel Journo
Change-Id: Ib1530c5b45340625805c057f8ff1fb240a43ea62
|
|
This issue was exposed when executing a connected line subroutine.
When connected or redirected subroutines or macros are executed it is
expected that the underlying applications and logic invoked are fast
and do not consume frames. In practice this constraint is not enforced
and if not adhered to will cause channels to continue when they shouldn't.
This is because each caller of the connected or redirected logic does not
check whether the channel has been hung up on return. As a result the
the hung up channel continues.
This change makes it so when the API to execute a subroutine or
macro is invoked the channel is checked to determine if it has hung up.
If it has then a hangup is queued again so the caller will see it
and stop.
ASTERISK-25690 #close
Change-Id: I1f9a8ceb1487df0389f0d346ce0f6dcbcaf476ea
|
|
|
|
There are two ways in which the reload() function in res_musiconhold can be
called from the CLI:
* module reload res_musiconhold.so
* moh reload
In the former case, the module loader holds a lock that prevents multiple
concurrent calls, but in the latter there is no such protection.
This patch changes the 'moh reload' CLI command to invoke the module loader
directly, rather than call reload() explicitly.
ASTERISK-25687 #close
Change-Id: I408968b4c8932864411b7f9ad88cfdc7b9ba711c
|
|
PJPROJECT has a function available to dump the compile time
options used when building the library.
* Add CLI "pjsip show buildopts" command.
* Update contrib/scripts/autosupport to get pjproject information.
Change-Id: Id93a6a916d765b2a2e5a1aeb54caaf83206be748
|
|
|
|
|
|
|
|
* changes:
Sorcery: Create human friendly serializer names.
Stasis: Create human friendly taskprocessor/serializer names.
taskprocessor.c: New API for human friendly taskprocessor names.
taskprocessor.c: Sort CLI "core show taskprocessors" output.
|
|
|
|
* changes:
taskprocessor.c: Fix CLI "core show taskprocessors" unref.
taskprocessor.c: Add CLI "core ping taskprocessor" missing unlock.
|