Age | Commit message (Collapse) | Author |
|
Milliwatt is vulnerable to a remotely exploitable stack overrun when using
the 'o' option. This occurs due to the milliwatt_generate function not
accounting for AST_FRIENDLY_OFFSET when calculating the maximum number of
samples it can put in the output buffer.
This patch resolves this issue by taking into account AST_FRIENDLY_OFFSET
when determining the maximum number of samples allowed. Note that at no
point is remote code execution possible. The data that is written into the
buffer is the pre-defined Milliwatt data, and not custom data.
(closes issue ASTERISK-19541)
Reported by: Russell Bryant
Tested by: Matt Jordan
Patches:
milliwatt_stack_overrun.rev1.txt by Russell Bryant (license 6283)
Note that this patch was written by Russell, even though Matt uploaded it
........
Merged revisions 359645 from http://svn.asterisk.org/svn/asterisk/branches/1.6.2
........
Merged revisions 359656 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 359694 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@359704 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Missed on the previous commit
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@359651 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
The connected line interception macros do not get executed when the
outgoing channel is initially created and that channel's caller-id is
implicitly imported into the incoming channel's connected line data. If
you are using the interception macros, you would expect that they get run
for every change to a channel's connected line information outside of
normal dialplan execution.
Review: https://reviewboard.asterisk.org/r/1817/
........
Merged revisions 359609 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 359620 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@359644 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Review: https://reviewboard.asterisk.org/r/1696/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@359607 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Initialize a struct sockaddr_in in try_transfer() so that the code isn't
(potentially) trying to read from it while uninitialized.
........
Merged revisions 359558 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 359559 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@359560 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Avoid potential use of idroster in gtalk_alloc() before it has been
initialized.
........
Merged revisions 359508 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 359509 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@359510 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Ensure that status is set before it is used by resetting it during each loop
iteration. This could have resulted in incorrect results from this app.
........
Merged revisions 359486 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 359491 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@359495 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Scan results indicated that this array could be used uninitialized. At a quick
look, it looks correct. In any case, initializing it is a Good Thing (tm).
........
Merged revisions 359457 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 359458 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@359459 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This patch ensures that the struct defined by AST_DECLARE_APP_ARGS() is always
fully initialized. I'm not sure if this fixes any real bugs, but it silences
a bunch of warnings from coverity, and is generally a good thing to do anyway.
........
Merged revisions 359452 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 359454 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@359456 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Calling ast_indicate()/ast_indicate_data() with the channel lock held can
result in a deadlock with a local channel because of how local channels
need to avoid deadlock.
........
Merged revisions 359451 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 359453 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@359455 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This patch adds unit tests for main/jitterbuf.c. This includes checking for
the following:
* Nominal insertion and retrieval of frames
* Insertion and retrieval of frames where the frames are inserted out of
order with respect to the previous frame
* Insertion and retrieval of frames where some number of frames that would
occur in the expected sequence are instead dropped
* Insertion and retrieval of frames with an arrival time that does not occur
at the same rate as the surrounding frames
* Resynchronization of the jitter buffer when an inserted frame breaks the
resynchronization threshold
* Overfilling of the jitter buffer
For each of the tests, both JB_TYPE_VOICE and JB_TYPE_CONTROL permutations
exist.
Review: https://reviewboard.asterisk.org/r/1815
(issue: ASTERISK-18964)
Reported by: Kris Shaw
Tested by: Kris Shaw, Matt Jordan
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@359406 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@359360 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
When a change in time occurs, such that the timestamps associated with frames
being placed into an adaptive jitter buffer (implemented in jitterbuf.c)
are significantly different then the previously inserted frames, the jitter
buffer checks to see if it needs to be resynched to the new time frame. If
three consecutive packets break the threshold, the jitter buffer resynchs
itself to the new timestamps. This currently only occurs when history is
calculated, and hence only on JB_TYPE_VOICE frames.
JB_TYPE_CONTROL frames, on the other hand, are never passed to the history
calculations. Because of this, if the jump in time is greater then the
maximum allowed length of the jitter buffer, the JB_TYPE_CONTROL frames are
dropped and no resynchronization occurs. Alterntively, if the overfill
logic is not triggered, the JB_TYPE_CONTROL frame will be placed into the
buffer, but with a time reference that is not applicable. Subsequent
JB_TYPE_VOICE frames will quickly trigger the overflow logic until reads
from the jitter buffer reach the errant JB_TYPE_CONTROL frame.
This patch allows JB_TYPE_CONTROL frames to resynch the jitter buffer. As
JB_TYPE_CONTROL frames are unlikely to occur in multiples, it perform the
resynchronization on any JB_TYPE_CONTROL frame that breaks the resynch
threshold.
Note that this only impacts chan_iax2, as other consumers of the adaptive
jitter buffer use the abstract jitter buffer API, which does not use
JB_TYPE_CONTROL frames.
Review: https://reviewboard.asterisk.org/r/1814/
(closes issue ASTERISK-18964)
Reported by: Kris Shaw
Tested by: Kris Shaw, Matt Jordan
Patches:
jitterbuffer-2012-2-26.diff uploaded by Kris Shaw (license 5722)
........
Merged revisions 359356 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 359358 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@359359 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
When connected line support was added, the wait_for_answer() variable
single changed its meaning slightly. Unfortunately, the places where
single was used did not necessarily get updated to reflect that change.
Also audio/video frames were sent to all forked calls when the endpoints
were never made compatible.
* Don't pass audio/video media frames when the channels have not been made
compatible.
* Added handling of AST_CONTROL_SRCCHANGE to app_dial.c.
* Fixed app_dial.c passing on AST_CONTROL_HOLD because that frame can also
pass a requested MOH class.
(closes issue ASTERISK-16901)
Reported by: Chris Gentle
(closes issue ASTERISK-17541)
Reported by: clint
Review: https://reviewboard.asterisk.org/r/1805/
........
Merged revisions 359344 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 359355 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@359357 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
In r357272, astobj2 was changed to automatically enable REF_DEBUG when the
TEST_FRAMEWORK flag was enabled. Unfortunately, some compilers (gcc 4.5.1
at least) will attempt to inline ao2_iterator_destroy in handle_astobj2_test.
This by itself is not a problem; unfortunately, the compiler believes that
there is a code path wherein an object allocated on the stack will be
free'd. As warnings are treated as errors, this prevents compilation of
astobj2.
This patch works around that by adding the noinline attribue to
ao2_iterator_destroy, but only if the TEST_FRAMEWORK flag is enabled.
Preventing inlining is only needed for the test method defined in astobj2,
which is also only enabled if TEST_FRAMEWORK is enabled.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@359306 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This patch updates the NUMLOGLEVELS define in logger.h to 32, to match the fact
that logger.c implements 32 log levels (because of the custom log level stuff).
asterisk.c uses this define to size an array of levels per remote console.
This array is modified in ast_console_toggle_loglevel(), which is called by the
"logger set level" CLI command. While the documentation for the CLI command
doesn't make it terribly obvious, you can use this CLI command to toggle a
custom log level on a remote console, as well. However, doing so led to an
invalid array index in asterisk.c.
This array is read from any time a log message is written to a console. So,
all custom log level messages resulted in a bogus read if a remote console
was connected.
........
Merged revisions 359259 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 359260 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@359261 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
These few places in the code used sizeof() on h_addr in struct hostent.
This is sizeof(char *). The correct way to get the size of this address is to
use h_length. This error would result in reads/writes of 8 bytes instead of 4
on 64-bit machines.
........
Merged revisions 359211 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 359212 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@359213 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This code just needed sizeof(int), not sizeof(int *).
........
Merged revisions 359157 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 359162 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@359166 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
........
Merged revisions 359116 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 359117 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@359118 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
In this case, just remove the memset(). There was a redundant memset that is
done correctly just 2 lines later.
........
Merged revisions 359110 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 359114 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@359115 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
........
Merged revisions 359088 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 359091 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@359095 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This didn't actually result in a bug anywhere, luckily. The only place
where the result of these memcpys was used is in app_dial, and the only
field that it read out of ast_call_feature was the first one, which is an
int, so these memcpys always copied just enough to avoid a problem.
........
Merged revisions 359069 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 359072 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@359075 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
........
Merged revisions 359059 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 359060 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@359061 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
's' is set to 'workspace'. Make sure 'workspace' doesn't go out of scope while
the reference to it via 's' is still used.
........
Merged revisions 359056 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 359057 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@359058 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
........
Dump cache of published events when a node joins the cluster.
Also use a more reliable method for stopping the poll() thread.
........
Merged revisions 359053 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@359055 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
These modules are being maintained outside of the tree and have been for a long
time now, so it doesn't make sense to keep them here.
Review: https://reviewboard.asterisk.org/r/1764/
........
Merged revisions 359050 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 359051 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@359052 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
...again.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@359011 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Added new chan_dahdi.conf colp_send option parameter to block connected
line updates per span.
(closes issue ASTERISK-17025)
Reported by: Michael Smith
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@358997 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
A previous CDR fix for setting CDR variables during a bridge via
custom dialplan features broke setting CDR variables in the
hangup extension. This patch fixes the issue.
Review: https://reviewboard.asterisk.org/r/1794/
........
Merged revisions 358978 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 358989 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@358993 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This patch drastically simplifies the device state aggegation code.
The old method was not only overly complex, but also made it impossible
to return AST_DEVICE_INVALID from the aggregation code. The unit test
update is as a result of fixing that bug.
The SIP change stems from a bug introduced by removing a DNS lookup
for hostname-based SIP channels.
(closes issue ASTERISK-16702)
Review: https://reviewboard.asterisk.org/r/1808/
........
Merged revisions 358943 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 358944 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@358945 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
(closes issue ASTERISK-19513)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@358908 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Review: https://reviewboard.asterisk.org/r/1786/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@358907 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
The set_format() function was more subtle in how it modified the
struct ast_channel readtrans/writetrans values.
* Fixed ast_activate_generator() conversion correctly.
(closes issue ASTERISK-19434)
Reported by: Birger Harzenetter
Tested by: rmudgett
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@358861 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@358858 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
like in 1.4.
This change restores functionality that was present in 1.4, when AEL macros
were implemented with the Macro dialplan application. Macros are fraught with
functionality issues, because they consume a large portion of the underlying
application stack. This limits the ability of AEL users to call many layers
of subroutines, an issue which Gosub does not have (originally tested to
100,000 levels deep). Therefore, starting in 1.6.0, AEL macros were
implemented with Gosub.
However, there were some implicit behaviors of Macro, which were not replicated
at the same time as with the transition to Gosub, one of which is documented in
the related issue. In particular, the "h" extension is designed to execute not
in the Macro context, but in the topmost calling context. Due to legacy issues
with a misapplied bugfix many years ago, when a macro exited in 1.4, it looks
in all calling contexts, bubbling up from the deepest level until it finds an
"h" extension.
Since AEL hides the complexity of the underlying dialplan logic from the AEL
programmer, it's reasonable to assume that this behavior should not change in
the transition from Asterisk 1.4 LTS to Asterisk 1.8 LTS, lest we break
working AEL configurations in the transition to Asterisk 1.8 LTS. This fix
is the result, which implements a search for the "h" extension in all calling
Gosub contexts.
Fixes ASTERISK-19336
Patch: 20120308__ael_bugfix_for_trunk__2.diff (License #5003) by Tilghman Lesher
(with slight modifications for 1.8)
Tested by: Johan Wilfer
Review: https://reviewboard.asterisk.org/r/1776/
........
Merged revisions 358810 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 358811 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@358812 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
channel driver operation and add additional functionality:
* Added ability to use multiple lines on phone, so for one device in configuration multiple lines can be defined, it allows to have multiple calls on one phone, callwaiting and switching between calls.
* Added ability for translation on-screen menu to multiple languages. Tested on Russian languages. Supported encodings: ISO 8859-1, ISO 8859-2, ISO 8859-4, ISO 8859-5, ISO 2022-JP. Language controlled by 'language' and on-screen menu of phone
* Other described in CHANGES file
Testing done by issue tracker users: ibercom, scsiborg, idarwin, TeknoJuce, c0rnoTa.
Tested on production system by Jonn Taylor (jonnt) using phone models: Nortel i2004, 1120E and 1140E.
(closes issue ASTERISK-16890)
Review: https://reviewboard.asterisk.org/r/1243/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@358766 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
bridge portion of paging. This also adds a new 'announcement' option to ConfBridge user profiles.
Review: https://reviewboard.asterisk.org/r/1754/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@358730 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@358691 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@358647 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@358646 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Attempting to transfer with SIP to an address like 1XXXXX@ip.ad.re.ss:5061 would fail
because port would be cut from the host string and ignored. This simply keeps chan_sip
from cutting off the port number during these kinds of transfers.
(closes issue ASTERISK-19321)
Reported by: Federico Alves
Review: https://reviewboard.asterisk.org/r/1790/diff/#index_header
........
Merged revisions 358643 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 358644 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@358645 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Passing -Wshadow to gcc enables shadow warnings. From the gcc manual:
Warn whenever a local variable or type declaration shadows another
variable, parameter, type, or class member (in C++), or whenever a
built-in function is shadowed.
Asterisk will not currently compile with this option set, but a number of bugs
have been discovered by enabling this flag on specific files. The long-term
goal is to eliminate all of the suspect code that causes this warning to be
emitted.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@358622 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@358609 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Patch also implements correct handling of datetime2 and datetimeoffset new
datatypes in SQL Server 2008 and 2008 R2.
(closes issue ASTERISK-17548)
Review: https://reviewboard.asterisk.org/r/1160/
Review: https://reviewboard.asterisk.org/r/1804/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@358576 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Update to:
(issue ASTERISK-19372)
........
Merged revisions 358530 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 358531 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@358532 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
If the wctc4xxp returns more than a single packet, we need to update the number
of samples in the returned frame accordingly.
Acked-by: Shaun Ruffell <sruffell@digium.com>
........
Merged revisions 358484 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 358485 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@358486 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
........
Merged revisions 358438 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 358441 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@358444 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Without detecting these types, cel_odbc blows up when the character
set for the table is utf8. This also wraps cdr_adaptive_odbc's use of
those types in the HAVE_ODBC_WCHAR #ifdef seen in other parts of the
code.
........
Merged revisions 358435 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 358436 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@358437 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
* Fix referencing the wrong variable in chan_dahdi.c:my_set_cadence().
Thanks to Sean Bright for compiling with -Wshadow and finding this bug.
........
Merged revisions 358377 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 358378 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@358379 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
For analog lines, enables Asterisk to use dialtone detection per channel
if an incoming call was hung up before it was answered. If dialtone is
detected, the call is hung up.
no: Disabled. (Default)
yes: Look for dialtone for 10000 ms after answer.
<number>: Look for dialtone for the specified number of ms after answer.
always: Look for dialtone for the entire call. Dialtone may return
if the far end hangs up first.
dialtone_detect=yes
dialtone_detect=5000
dialtone_detect=always
(closes issue ASTERISK-19316)
Reported by: Jeremy Pepper
Patch by: Jeremy Pepper
Tested by: rmudgett,Jeremy Pepper
Review: https://reviewboard.asterisk.org/r/1737/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@358344 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|