| Age | Commit message (Collapse) | Author |
|---|
|
Updated the AMI version for the following reason (see CHANGES for more details):
The 'PJSIPShowEndpoint' command's response event of 'IdentifyDetail' now
contains a new optional parameter, 'MatchHeader'.
Change-Id: I9aeac4decc89f9b464b3f026e97c7ef1acc79242
|
|
|
|
|
|
|
|
bridge"" into 13
|
|
from queue" into 13
|
|
|
|
Support for RFC3578 overlap dialling (i.e. 484 Response to partially matched
destinations) as currently provided by chan_sip is missing from res_pjsip.
This patch adds a new endpoint attribute (allow_overlap) [defaults to yes]
which when set to yes enables 484 responses to partial destination
matches rather than the current 404.
ASTERISK-26864
Change-Id: Iea444da3ee7c7d4f1fde1d01d138a3d7b0fe40f6
|
|
references." into 13
|
|
|
|
Rather than hard-coding UDP, allow consumers of the HEP API to specify
which protocol is in use. Update the PJSIP provider to pass in the
current protocol type.
ASTERISK-26850 #close
Change-Id: I54bbb0a001cfe4c6a87ad4b6f2014af233349978
|
|
This reverts commit 163e9e53dc7d84dd42721e733b7706c8147bdd27.
Change-Id: Ief28479c77a298879dfe2c56be7ee92dc465da4b
|
|
We aren't validating that the URI we just parsed is a SIP/SIPS one before
trying to access the user, host, and port members of a possibly uninitialized
structure.
Also update the MessageSend documentation to indicate what 'from' formats are
accepted.
ASTERISK-26484 #close
Reported by: Vinod Dharashive
Change-Id: I476b5cc5f18a7713d0ee945374f2a1c164857d30
|
|
ASTERISK-26776 #close
Change-Id: I884b6f4e8233a355d0be687ec78d41bc0e4d3fd2
|
|
Some codecs - codec_speex specifically - take voice frames and return
other types of frames, like CNG. If we subsequently treat those as
voice frames, we'll run into trouble when destroying the frame because
of the requirement that each voice frame have an associated format.
ASTERISK-26880 #close
Reported by: Kirsty Tyerman
Change-Id: I43f8450c48fb276ad8b99db8512be82949c1ca7c
|
|
|
|
|
|
POSIX does not require getprotobyname() to be thread safe and some
implementations use static memory which causes issues when multiple
threads are used.
Further, our usage of it today is just to ultimately get IPPROTO_TCP
for calls to setsockopt(). So instead we just use IPPROTO_TCP directly.
Change-Id: I2e14e58674808f7ce99b2f5e900d0f90d0d8da48
|
|
We are currently passing in the capacity of the read buffer instead of the
number of bytes that we actually read off the wire.
Change-Id: I60465049727d955c7f9a5e529e6f2aaff04cda36
|
|
|
|
|
|
stopped." into 13
|
|
into 13
|
|
|
|
|
|
Queue member will get stuck in pending_members if queue calls a device
that is different from the one observed for state changes.
This patch removes members from pending_members as a result of channel stasis
events such as blind or attended transfers and hangup.
ASTERISK-26862 #close
Change-Id: I8bf6df487b9bb35726c08049ff25cdad5e357727
|
|
* Added CHANNEL(callid) to retrieve the call identifier log tag associated
with the channel. Dialplan now has access to the call log search key
associated with the channel so it can be saved in case there is a problem
with the call.
ASTERISK-26878
Change-Id: I2c97ebd928b6f3c5bc80c5729e4d3c07f453049f
|
|
The queue_stasis_data structure contains various mutable fields that require
appropriate locking. Specifically, the 'dying,' 'member_uniqueid,' and
'caller_uniqueid' fields need to be locked when read from or written to.
Change-Id: I246b7dbff8447acc957a1299f6ad0ebd0fd39088
|
|
transport" into 13
|
|
ASTERISK-26846 #close
Change-Id: I541a1602ff55ab73684e9f8002edb9e0e745d639
|
|
Thanks to Chris Howard for pointing this out on the wiki.
Change-Id: I18e56de09a70e736b5d04719d45ef29cf0636705
|
|
struct ast_rtcp does not define the dtls member if SRTP is not enabled.
ASTERISK-26732
Change-Id: Id15ea212e04490e012f2cf4a56818b4dd948875e
|
|
We were inadvertenly referencing the cos_video option to determine if we
should set the tos_audio and cos_audio value on the RTP instance.
Change-Id: Ia7964f486801d39dc6f5dae570baff079e1595b0
|
|
If local_net is not defined on a transport, transport_state->localnet
will be NULL. ast_apply_ha will, be default, return AST_SENSE_ALLOW in
this case, causing the external_media_address, if set, to be skipped.
This patch causes us to only check if we are sending within a network if
local_net is defined.
ASTERISK-26879 #close
Change-Id: Ib661c31a954cabc9c99f1f25c9c9a5c5b82cbbfb
|
|
Currently a wildcard address is used for the local RTP socket, which
will not always result in the same address as used by the SIP socket
(e.g. if explicit transport addresses are configured).
Use the transport's host address when binding new local RTP sockets if
available.
ASTERISK-26851
Change-Id: I098c29c9d1f79a4f970d72ba894874ac75954f1a
|
|
This change removes an assumption that when DTLS is stopped
an RTCP session will be present on the RTP session. This is not
always the case.
ASTERISK-26732
Change-Id: Ib9f7c09ce0b005efe362dbcc8795202b18f94611
|
|
A new transport parameter 'symmetric_transport' has been added.
When a request from a dynamic contact comes in on a transport with
this option set to 'yes', the transport name will be saved and used
for subsequent outgoing requests like OPTIONS, NOTIFY and INVITE.
It's saved as a contact uri parameter named 'x-ast-txp' and will
display with the contact uri in CLI, AMI, and ARI output. On the
outgoing request, if a transport wasn't explicitly set on the
endpoint AND the request URI is not a hostname, the saved transport
will be used and the 'x-ast-txp' parameter stripped from the
outgoing packet.
* config_transport was modified to accept and store the new parameter.
* config_transport/transport_apply was updated to store the transport
name in the pjsip_transport->info field using the pjsip_transport->pool
on UDP transports.
* A 'multihomed_on_rx_message' function was added to
pjsip_message_ip_updater that, for incoming requests, retrieves the
transport name from pjsip_transport->info and retrieves the transport.
If transport->symmetric_transport is set, an 'x-ast-txp' uri parameter
containing the transport name is added to the incoming Contact header.
* An 'ast_sip_get_transport_name' function was added to res_pjsip.
It takes an ast_sip_endpoint and a pjsip_sip_uri and returns a
transport name if endpoint->transport is set or if there's an
'x-ast-txp' parameter on the uri and the uri host is an ipv4 or
ipv6 address. Otherwise it returns NULL.
* An 'ast_sip_dlg_set_transport' function was added to res_pjsip
which takes an ast_sip_endpoint, a pjsip_dialog, and an optional
pjsip_tpselector. It calls ast_sip_get_transport_name() and if
a non-NULL is returned, sets the selector and sets the transport
on the dialog. If a selector was passed in, it's updated.
* res_pjsip/ast_sip_create_dialog_uac and ast_sip_create_dialog_uas
were modified to call ast_sip_dlg_set_transport() instead of their
original logic.
* res_pjsip/create_out_of_dialog_request was modified to call
ast_sip_get_transport_name() and pjsip_tx_data_set_transport()
instead of its original logic.
* Existing transport logic was removed from endpt_send_request
since that can only be called after a create_out_of_dialog_request.
* res_pjsip/ast_sip_create_rdata was converted to a wrapper around
a new 'ast_sip_create_rdata_with_contact' function which allows
a contact_uri to be specified in addition to the existing
parameters. (See below)
* res_pjsip_pubsub/internal_pjsip_evsub_send_request was eliminated
since all it did was transport selection and that is now done in
ast_sip_create_dialog_uac and ast_sip_create_dialog_uas.
* 'contact_uri' was added to subscription_persistence. This was
necessary because although the parsed rdata contact header has the
x-ast-txp parameter added (if appropriate),
subscription_persistence_update stores the raw packet which
doesn't have it. subscription_persistence_recreate was then
updated to call ast_sip_create_rdata_with_contact with the
persisted contact_uri so the recreated subscription has the
correct transport info to send the NOTIFYs.
* res_pjsip_session/internal_pjsip_inv_send_msg was eliminated since
all it did was transport selection and that is now done in
ast_sip_create_dialog_uac.
* pjsip_message_ip_updater/multihomed_on_tx_message was updated
to remove all traces of the x-ast-txp parameter from the
outgoing headers.
NOTE: This change does NOT modify the behavior of permanent
contacts specified on an aor. To do so would require that the
permanent contact's contact uri be updated with the x-ast-txp
parameter and the aor sorcery object updated. If we need to
persue this, we need to think about cloning permanent contacts into
the same store as the dynamic ones on an aor load so they can be
updated without disturbing the originally configured value.
You CAN add the x-ast-txp parameter to a permanent contact's uri
but it would be much simpler to just set endpoint->transport.
Change-Id: I4ee1f51473da32ca54b877cd158523efcef9655f
|
|
|
|
into 13
|
|
into 13
|
|
|
|
|
|
Dereferencing struct ast_autochan.chan without first calling
ast_autochan_channel_lock() is unsafe because the pointer could change at
any time due to a masquerade. Unfortunately, ast_autochan_channel_lock()
itself uses struct ast_autochan.chan unsafely and can result in a deadlock
if the original channel happens to get destroyed after a masquerade in
addition to the pointer getting changed.
The problem is more likely to happen with v11 and earlier because
masquerades are used to optimize out local channels on those versions.
However, it could still happen on newer versions if the channel is
executing a dialplan application when the channel is transferred or
redirected. In this situation a masquerade still must be used.
* Added a lock to struct ast_autochan to safely be able to use
ast_autochan.chan while trying to get the channel lock in
ast_autochan_channel_lock(). The locking order is the channel lock then
the autochan lock. Locking in the other direction requires deadlock
avoidance.
* Fix unsafe ast_autochan.chan usages in app_mixmonitor.c.
* Fix unsafe ast_autochan.chan usages in app_chanspy.c.
* app_chanspy.c: Removed unused autochan parameter from next_channel().
ASTERISK-26867
Change-Id: Id29dd22bc0f369b44e23ca423d2f3657187cc592
|
|
header_match." into 13
|
|
stdout" into 13
|
|
This commit adds support for RFC 5761: Multiplexing RTP Data and Control
Packets on a Single Port. Specifically, it enables the feature when
using chan_pjsip.
A new option, "rtcp_mux" has been added to endpoint configuration in
pjsip.conf. If set, then Asterisk will attempt to use rtcp-mux with
whatever it communicates with. Asterisk follows the rules set forth in
RFC 5761 with regards to falling back to standard RTCP behavior if the
far end does not indicate support for rtcp-mux.
The lion's share of the changes in this commit are in
res_rtp_asterisk.c. This is because it was pretty much hard wired to
have an RTP and an RTCP transport. The strategy used here is that when
rtcp-mux is enabled, the current RTCP transport and its trappings (such
as DTLS SSL session) are freed, and the RTCP session instead just
mooches off the RTP session. This leads to a lot of specialized if
statements throughout.
ASTERISK-26732 #close
Reported by Dan Jenkins
Change-Id: If46a93ba1282418d2803e3fd7869374da8b77ab5
|
|
A caller can leave the Queue() application after being bridged with a
member in a few ways:
* Caller or member hangup
* Caller is transferred somewhere else (blind or atx)
* Caller is externally redirected elsewhere
The first 2 scenarios are currently handled by subscribing to stasis
messages, but the 3rd is not explicitly covered. If a caller is
redirected away from the Queue() application, the member who was last
bridged with that caller will remain in an "In use" state until the
caller hangs up.
This patch adds handling of the caller leaving the queue via
redirection. We monitor the caller-member bridge, and if the caller is
the one that leaves, we treat it the same as we would a caller hangup.
ASTERISK-26400 #close
Reported by: Etienne Lessard
Change-Id: Iba160907770de5a6c9efeffc9df5a13e9ea75334
|
|
This change ensures that if no header_match option is set on an
identify an error message is not output stating the option is set
to an invalid value.
ASTERISK-26863
Change-Id: I239bc6d2319dd3da24ba96a38d4d6e9b5526d62a
|
|
|
|
|
