Age | Commit message (Collapse) | Author |
|
manager show commands now shows the full name of the command being displayed
regardless of size. The privilege column has also been removed from this
display. It will also now use the full length of the terminal if curses is
available. Manager show command will now always display the privilege of
the manager command within the CLI.
(closes ASTERISK-20396)
Reported by: Johan Wilfer
Review: https://reviewboard.asterisk.org/r/2143/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@375103 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Instead of a recompile, allow values to be adjusted in dsp.conf
For binary distributions allows easy adjustment for wobbly GSM calls, and other reasons.
Defaults to DTMF_HITS_TO_BEGIN=2 and DTMF_MISSES_TO_END=3
(closes issue ASTERISK-17493)
Reported by: alecdavis
Tested by: alecdavis
alecdavis (license 585)
Review https://reviewboard.asterisk.org/r/2144/
........
Merged revisions 374479 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 374481 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 374485 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@374493 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Asterisk's DTMF Specifications are based on AT&T specs, which may not be compatible in other countries.
Various countries have different specifications for the maximum power level differences
between the DTMF low group and high group of frequencies.
Power level difference between frequencies for different Administrations/RPOAs
NTT = Max. 5 dB
AT&T = 4dB(reverse) to 8dB(normal)
Danish = Max. 6 dB
Australian = Max. 10 dB
Brazilian = Max. 9 dB
ETSI = Max. 6 dB from ETSI ES 201 235-3 V1.3.1 (2006-03)
Now allow 4 variables to be individually configured in dsp.conf, with reasonable min/max of 2dB to 20dB.
Default is AT&T specifications
Add's the following variables to dsp.conf
;dtmf_normal_twist=6.31
;dtmf_reverse_twist=2.51
;relax_dtmf_normal_twist=6.31
;relax_dtmf_reverse_twist=3.98
(closes issue ASTERISK-20442)
Reported by: tbsky
Tested by: tbsky,alecdavis
alecdavis (license 585)
Review https://reviewboard.asterisk.org/r/2141/
........
Merged revisions 374384 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 374385 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 374386 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@374387 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This patch adds an optional header to the PlayDTMF AMI action, Duration.
It allows the duration of the DTMF digit to be played on the channel to be
specified in milliseconds.
(closes issue ASTERISK-18172)
Reported by: Renato dos Santos
patches:
send-dtmf.patch uploaded by Renato dos Santos (license #6267)
Modified slightly for this commit for Asterisk 12.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@373979 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Currently, if there are modifications to mailboxes that Asterisk is
not aware of, the user needs to add "pollmailboxes" to their mailbox
configuration, which repeatedly polls the subscribed mailboxes for
changes. This results in a lot of extra work for the CPU. This patch
introduces the AMI command VoicemailRefresh which permits external
applications to trigger the refresh themselves. The refresh can apply
to a specified mailbox only, an entire context, or all configured
mailboxes. Even a refresh performed on every mailbox would not consume
as much CPU as the pollmailboxes option, given that pollmailboxes runs
continuously and this only runs on demand.
(closes issue ASTERISK-17206)
(closes issue ASTERISK-19908)
Reported-by: Jeff Hutchins
Reported-by: Tilghman Lesher
Patch-by: Tilghman Lesher
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@373913 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This allows for the REDIRECTING dialplan function to be
used to set the reason to any string.
The SIP channel driver has been modified to set the redirecting
reason string to the value received in a Diversion header. In
addition, SIP 480 response reason text will set the redirecting
reason as well.
(closes issue AST-942)
reported by Malcolm Davenport
(closes issue AST-943)
reported by Malcolm Davenport
Review: https://reviewboard.asterisk.org/r/2101
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@373701 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This patch adds support for hints on a queue. Hints can be added using
the nomenclature 'Queue:name', where name is the name of the queue being
monitored.
This nifty feature was done by Alec Davis.
Review: https://reviewboard.asterisk.org/r/1619
Reported by: Alec Davis
Tested by: alecdavis
patches:
review1619.diff2 by alecdavis (license 585)
........
Merged revisions 373235 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@373239 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Sets INUSE when no free agents, NOT_INUSE when an agent is free.
modifes handle_statechange() scan members loop to scan for a free agent
and updates the Queue:queuename_avial devstate.
Previously exited early if the member was found in the queue.
Now Exits later when both a member was found, and a free agent was found.
alecdavis (license 585)
Reported by: Alec Davis
Tested by: alecdavis
Review: https://reviewboard.asterisk.org/r/2121/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@373188 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
(issue AST-969)
Reported by John Bigelow
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@372832 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Prior to this patch, if pause or unpause was issued on an interface
without specifying a specific queue, a PAUSEALL or UNPAUSEALL event
would be logged in the queue log even if that interface wasn't a
member of any queues. This patch changes it so that these events are
only logged when at least one member of any queue exists for that
interface.
(closes issue AST-946)
Reported by: John Bigelow
Review: https://reviewboard.asterisk.org/r/2079/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@372148 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
........
Merged revisions 371146 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@371147 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
(closes issue ASTERISK-18390)
Reported by: Peter Racz
Patches:
dundi_cli_cache.patch.v2 uploaded by Peter Racz (license #6290)
ASTERISK-18390_dundi_cli_cache_jrose_mods_v2.diff uploaded by Jonathan Rose (license #6182)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370978 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370953 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This is based on the work done by Olle Johansson on review board.
The idea is that the channel specified in an AMI originate or call
file is typically not connected to the outgoing extension until the
channel has been answered. With this change, an EarlyMedia header can
be specified for AMI originates and an early_media option can
be specified in call files. With this option set, once early media is
received on a channel, it will be connected with the outgoing extension.
(closes issue ASTERISK-18644)
Reported by Olle Johansson
Review: https://reviewboard.asterisk.org/r/1472
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370951 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Implementation of a dialplan function for checking manager accounts. Right now
it only returns the number of logged in sessions for a manager account, but
other attributes can be added later.
Patch by: Olle Johansson
Review: https://reviewboard.asterisk.org/r/421/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370943 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This patch adds named calledgroups/pickupgroups to Asterisk. Named groups are
implemented in parallel to the existing numbered callgroup/pickupgroup
implementation. However, unlike the existing implementation, which is limited
to a maximum of 64 defined groups, the number of defined groups allowed for
named callgroups/pickupgroups is effectively unlimited.
Named groups are configured with the keywords "namedcallgroup" and
"namedpickupgroup". This corresponds to the numbered group definitions of
"callgroup" and "pickupgroup". Note that as the implementation of named groups
coexists with the existing numbered implementation, a defined named group of
"4" does not equate to numbered group 4.
Support for the named groups has been added to the SIP, DAHDI, and mISDN channel
drivers.
Review: https://reviewboard.asterisk.org/r/2043
Uploaded by:
Guenther Kelleter(license #6372)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370831 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This is a patch from kkm from review board.
This is useful for adding headers to REFER requests that
emanate from a Transfer() dialplan application call.
This also fixes some uses of the Referred-by header, removing
an extra set of angle brackets.
I've modified the reporter's original patch to not require
any additions to the sip_refer header and to just remove the
referred_by_name from sip_refer since it is no longer needed
or used.
(closes Issue ASTERISK-17639)
reported by Kirill Katsnelson
Patches:
019059-sip-refer-addheaders-trunk-353549.diff
uploaded by Kirill Katsnelson (license #5845)
Review: https://reviewboard.asterisk.org/r/1159
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370691 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
With this option set, channel variables can be set on
every manager originate. The Variable header can still
be used to set additional channel variables for individual
calls if desired.
This work was completed by Olle Johansson on review board.
I have applied the review feedback and am committing it in
order to get this into trunk before Asterisk 11 is branched.
Review: https://reviewboard.asterisk.org/r/1412
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370681 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
From corruptor's review board posting:
"I've noticed that we can remove particular extension from context with
dialplan remove extension command but in order to remove all extensions
in the context we should delete them on by one. I've created dialplan
remove context command which uses ast_context_destroy to destroy the
whole context with all extensions. I've created to functions for in
pbx_config.c: handle_cli_dialplan_remove_context which actually removes
context and complete_dialplan_remove_context which completes input.
They are based on other similar functions and pretty trivial but I can be
mistaken somewhere.
"I've also modified dialplan add include <context2> into <context1>. I've
made it similar dialplan add extension ... command. It creates <context1>
if it doesn't exist and I've also modified complete_dialplan_add_include
and removed check for existance of <context2> because we can include
non-existent context into another one. (I usually include empty
(non-existent) contexts in advance). Should we raise warning in this case
as it's raised while reading extensions.conf?
"I use those functions with AMI. I think manager commands should be created
in addition to those CLI commands."
I've addressed the latest comments on review board and have made some other
coding guidelines-related cleanup. I also have modified the CHANGES file to
mention these new commands.
(closes issue ASTERISK-19292)
reported by Andrey Solovyev
Patches:
dialplan_add_include.patch
uploaded by Andrey Solovyev (license #5214)
dialplan_remove_context.patch
uploaded by Andrey Solovyev (license #5214)
Review: https://reviewboard.asterisk.org/r/2042
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370644 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This patch allows you to specify a port number for the MySQL server.
It's useful if a MySQL server is running on a non-standard port.
Even though this module is deprecated in favor of func_odbc, someone
asked for this feature and it seems pretty harmless to add.
It has been tested using a number of combinations of with/without a
port number specified in the dialplan and changing the port number
for mysqld.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370534 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This patch was submitted by mnicholson a while back. It adds a new AMI action
which allows users to request SIP peer status on demand similar to existing
PeerStatus events and to the output you would see from CLI with sip show peer
Review: https://reviewboard.asterisk.org/r/1098/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370518 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This patch changes the Asterisk configure script and build system to detect
the presence of the NetBSD editline library (libedit) on the system. If it is
found, it will be used in preference to the version included in the Asterisk
source tree.
(closes issue ASTERISK-18725)
Reported by: Jeffrey C. Ollie
Review: https://reviewboard.asterisk.org/r/1528/
Patches:
0001-Allow-linking-building-against-an-external-editline.patch uploaded by jcollie (license #5373) (heavily modified by kpfleming)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370481 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370427 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
The WebRTC version of the iLBC codec is now package as a library and is
available on some platforms. This patch allows codec_ilbc to be built against
that library if it is present.
Review: https://reviewboard.asterisk.org/r/1964/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370407 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
minexpiry and maxexpiry.
This offers more fine-grained control over how long subscriptions last without negatively
affecting the expiration range for registrations.
Uploaded by:
Guenther Kelleter(license #6372)
Review: https://reviewboard.asterisk.org/r/2051
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370386 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This updates the CHANGES file with things that were committed for
Asterisk 11, but were not noted in that file.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370353 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
(issue ASTERISK-19963)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370315 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
hardcoded dial timeout constant.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370165 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This is a significant change and mention of it should have gone into
UPGRADE.txt and CHANGES.
........
Merged revisions 370081 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 370082 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370083 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This allows SIP traffic to be exchanged over a WebSocket connection which is useful for rtcweb.
Review: https://reviewboard.asterisk.org/r/2008
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370072 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370066 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This patch adds Named ACL functionality to Asterisk. This allows system
administrators to define an ACL and refer to it by a unique name. Configurable
items can then refer to that name when specifying access control lists.
It also includes updates to all core supported consumers of ACLs. That includes
manager, chan_sip, and chan_iax2. This feature is based on the deluxepine-trunk
by Olle E. Johansson and provides a subset of the Named ACL functionality
implemented in that branch. For more information on this feature, see acl.conf
and/or the Asterisk wiki.
Review: https://reviewboard.asterisk.org/r/1978/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369959 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
written from scratch called chan_motif.
This channel driver is a replacement for both chan_gtalk and chan_jingle but adds additional features not found in either.
These features include full configuration reload, video, full codec support, bidirectional cause code mapping, hold,
unhold, and ringing indication. It is also compliant with the current published Jingle and Google Jingle specifications.
The original Google Talk protocol is also supported for Google Voice interoperability.
You may ask yourself though where the name motif comes from... and I would say to you... music!
motif: a perceivable or salient recurring fragment or succession of notes
Sorta like a jingle!
Review: https://reviewboard.asterisk.org/r/1917/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369769 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This patch adds a new CLI command, 'stun show status'. This command will show
a table describing all known STUN servers and statuses.
(closes issue ASTERISK-18046)
Reported by: Jeremy Kister
Tested by: Jeremy Kister
patches:
(stun-show-status-v4-trunk.patch license #6232 uploaded by Jeremy Kister)
Review: https://reviewboard.asterisk.org/r/2001
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369681 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
options are documented in config sample
sample config rename to proper name - ooh323.conf
To change media address ooh323 send empty TCS if there was
completed TCS exchange or send facility forwardedelements
with new fast start proposal if not.
Then close transmit logical channels and renew TCS exchange.
If new fast start proposal is received then ooh323 stack call back
channel driver routine to change rtp address in the rtp instance.
If empty TCS is received then close transmit logical channels and
renew TCS exchange
Review: https://reviewboard.asterisk.org/r/1607/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369613 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Hangup handlers are an alternative to the h extension. They can be used
in addition to the h extension. The idea is to attach a Gosub routine to
a channel that will execute when the call hangs up. Whereas which h
extension gets executed depends on the location of dialplan execution when
the call hangs up, hangup handlers are attached to the call channel. You
can attach multiple handlers that will execute in the order of most
recently added first.
(closes issue ASTERISK-19549)
Reported by: Mark Murawski
Tested by: rmudgett
Review: https://reviewboard.asterisk.org/r/2002/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369493 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This patch adds the core changes necessary to support AMI event documentation
in the source files of Asterisk, and adds documentation to those AMI events
defined in the core application modules. Event documentation is built from
the source by two new python scripts, located in build_tools:
get_documentation.py and post_process_documentation.py.
The get_documentation.py script mirrors the actions of the existing AWK
get_documentation scripts, except that it will scan the entirety of a source
file for Asterisk documentation. Upon encountering it, if the documentation
happens to be an AMI event, it will attempt to extract information about the
event directly from the manager event macro calls that raise the event. The
post_process_documentation.py script combines manager event instances that
are the same event but documented in multiple source files. It generates
the final core-[lang].xml file.
As this process can take longer to complete than a typical 'make all', it
is only performed if a new make target, 'full', is chosen.
Review: https://reviewboard.asterisk.org/r/1967/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369346 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This patch adds IPv6 support to AMI.
(Closes issue ASTERISK-19965)
Reported by: Michael L. Young
Tested by: Michael L. Young
Patches:
ami_ipv6_v3.diff uploaded by Michael L. Young (license 5026)
Review: https://reviewboard.asterisk.org/r/1968/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369126 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@368550 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Adds a number of methods for controlling the setting of 'ringinuse'
which is basically the same concept as the old ignorebusy setting,
only now the per member setting always controls whether or not the
member is actually ringed while in use. A CLI command and a manager
action have been added to change a given queue member's ringinuse
option while Asterisk is running and the an argument has been added
for adding members with deliberately set ringinuse in queues.conf
Some effort has been made to ensure compatability with dialplans and
databases still referring to 'ignorebusy'.
(issue ASTERISK-19536)
reported by: Philippe Lindheimer
Review: https://reviewboard.asterisk.org/r/1919/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@367080 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This patch improves the handling of call id logging significantly with regard
to transfers and adding APIs to better handle specific aspects of logging.
Also, changes have been made to chan_sip in order to better handle the creation
of callids and to enable the monitor thread to bind itself to a particular
call id when a dialog is determined to be related to a callid. It then unbinds
itself before returning to normal monitoring.
review: https://reviewboard.asterisk.org/r/1886/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@366842 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Like the new predial feature for Dial. This adds the same b/B options to
FollowMe.
Review: https://reviewboard.asterisk.org/r/1910/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@366507 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
the wiki.
The current CHANGES file refers to doc/ in many places and those files no longer exist.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@365213 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Review: https://reviewboard.asterisk.org/r/1896/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@365158 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
If enabled using the keepalive option in sip.conf a small packet will be sent
at a regular interval to keep the NAT mapping open. This is lightweight as the
remote side does not need to parse and handle a SIP message.
(closes issue AST-783)
Review: https://reviewboard.asterisk.org/r/1756/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@364500 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Add two new dialplan functions: FEATURE() and FEATUREMAP(). FEATURE()
lets you set some of the configuration options from the [general] section
of features.conf on a per-channel basis. FEATUREMAP() lets you customize
the key sequence used to activate built-in features, such as blindxfer,
and automon. See the built-in documentation for details.
Review: https://reviewboard.asterisk.org/r/1871/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@364437 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Thanks to Mark Murawski for the initial patch and feature definition.
(closes issue ASTERISK-19548)
Reported by: Mark Murawski
Review: https://reviewboard.asterisk.org/r/1878/
Review: https://reviewboard.asterisk.org/r/1229/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@364436 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Asterisk has a setting for the minimum allowed DTMF. If we get shorter
DTMF tones, these will be changed to the minimum on the outbound call
leg.
(closes issue ASTERISK-19772)
Review: https://reviewboard.asterisk.org/r/1882/
Reported by: oej
Tested by: oej
Patches by: oej
Thanks to the reviewers.
1.8 branch for this patch: agave-dtmf-duration-asterisk-conf-1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@363558 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
ISDN ETSI PTP and Q.SIG (And SS7 in future) have support for reporting who
was the original redirecting party of a call.
* Added support for the original redirecting party and reason to the
REDIRECTING function and the system core as well as to the stubbed
locations in sig_pri.c.
Review: https://reviewboard.asterisk.org/r/1829/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@362779 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
The current Security Events Framework API only supports IPv4 when it comes to
generating security events. This patch does the following:
* Changes the Security Events Framework API to support IPV6 and updates
the components that use this API.
* Eliminates an error message that was being generated since the current
implementation was treating an IPv6 socket address as if it was IPv4.
* Some copyright dates were updated on files touched by this patch.
(closes issue ASTERISK-19447)
Reported by: Michael L. Young
Tested by: Michael L. Young
Patches:
security_events_ipv6v3.diff uploaded by Michael L. Young (license 5026)
Review: https://reviewboard.asterisk.org/r/1777/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@362200 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|