| Age | Commit message (Collapse) | Author |
|---|
|
This adds support for parsing timelen values from config files. This
includes support for all flags which apply to PARSE_INT32. Support for
this parser is added to ACO via the OPT_TIMELEN_T option type.
Fixes an issue where extra characters provided to ast_app_parse_timelen
were ignored, they now cause an error.
Testing is included.
ASTERISK-27117 #close
Change-Id: I6b333feca7e3f83b4ef5bf2636fc0fd613742554
|
|
This has not worked for some time and is no longer actively maintained.
Change-Id: I5110b0db69c152761b58fa025cb0a53b0e544d99
|
|
ASTERISK-26846 #close
Change-Id: I541a1602ff55ab73684e9f8002edb9e0e745d639
|
|
This commit adds support for RFC 5761: Multiplexing RTP Data and Control
Packets on a Single Port. Specifically, it enables the feature when
using chan_pjsip.
A new option, "rtcp_mux" has been added to endpoint configuration in
pjsip.conf. If set, then Asterisk will attempt to use rtcp-mux with
whatever it communicates with. Asterisk follows the rules set forth in
RFC 5761 with regards to falling back to standard RTCP behavior if the
far end does not indicate support for rtcp-mux.
The lion's share of the changes in this commit are in
res_rtp_asterisk.c. This is because it was pretty much hard wired to
have an RTP and an RTCP transport. The strategy used here is that when
rtcp-mux is enabled, the current RTCP transport and its trappings (such
as DTLS SSL session) are freed, and the RTCP session instead just
mooches off the RTP session. This leads to a lot of specialized if
statements throughout.
ASTERISK-26732 #close
Reported by Dan Jenkins
Change-Id: If46a93ba1282418d2803e3fd7869374da8b77ab5
|
|
Dial events up to this point have come in two flavors
* A Dial event with no status to indicate that dialing has begun
* A Dial event with a status to indicate that dialing has ended
With this change, Dial events have been expanded to also give
intermediate events, such as "RINGING", "PROCEEDING", and "PROGRESS".
This is especially useful for ARI dialing, as it gives the application
writer the opportunity to place a channel into an early bridge when
early media is detected.
AMI handles these in-progress dial events by sending a new event called
"DialState" that simply indicates that dial state has changed but has
not ended. ARI never distinguished between DialBegin and DialEnd, so no
change was made to the event itself.
Another change here relates to dial forwards. A forward-related event
was previously only sent when a channel was successfully able to forward
a call to a new channel. With this set of changes, if forwarding is
blocked, we send a Dial event with a forwarding destination but no
forwarding channel, since we were prevented from creating one. This is
again useful for ARI since application writers can now handle call
forward attempts from within their own application.
ASTERISK-25925 #close
Reported by Mark Michelson
Change-Id: I42cbec7730d84640a434d143a0d172a740995543
|
|
Previously you could add [!dnid] to the SIP dial string to alter the To:
header. This change allows you to alter the From header as well.
SIP dial string extra options now look like this:
[![touser[@todomain]][![fromuser][@fromdomain]]]
INCOMPATIBLE CHANGE: If you were using an exclamation mark in your To:
header, that is no longer possible.
ASTERISK-25803 #close
Change-Id: I2457e9ba7a89eb1da22084bab5a4d4328e189db7
|
|
- The maximum_number_of_words was previously documented as being
the number of words that when exceeded, would result in the AMD
application returning that the audio represents a machine.
This was inconsistent with its actual functionality - it was
a number of words that when REACHED, would result in determination
as a machine.
This update corrects the functionality to match the previously
documented functionality. This is a backwards incompatible change
in configuration file, and has been added to UPGRADE.txt as a result.
The sample configuration file and application defaults have been updated
so that the default value is now 2, which reflects the same default
functionality as previous versions.
- Update documentation for silence_threshold, which previously implied
that it was measuring time, rather than noise averages in the sample.
- Update the comments in amd.conf.sample.
ASTERISK-25639 #close
Change-Id: I4b1451e5dc9cb3cb06d59b6ab872f5275ba79093
|
|
Previous versions of Asterisk processed command-line options before
processing asterisk.conf. This meant that if an option was set in
asterisk.conf, it could not be overridden with the equivelent command
line option. This change causes Asterisk to process the command-line
twice. First it processes options that are needed to load asterisk.conf,
then it processes the remaining options after the config is read.
This changes the function of -X slightly. Previously using -X without
disabling execincludes in asterisk.conf caused #exec to be usable in any
config. Now -X only enables #exec for the load of asterisk.conf, if it
is wanted in the rest of the system it must be enabled with execincludes
in asterisk.conf. Updated 'asterisk -h' and 'man asterisk' to reflect
the limited function of -X.
ASTERISK-25042 #close
Reported by: Corey Farrell
Change-Id: I1450d45c15b4467274b871914d893ed4f6564cd7
|
|
* The REF_DEBUG compiler flag no longer has any effect on code that uses
Astobj2. It is used to determine if reference debugging is enabled by
default. Reference debugging can be enabled or disabled in asterisk.conf.
* Caller information is provided in logger errors for ao2 bad magic numbers.
* Optimizes AO2 by merging internal functions with the public counterpart.
This was possible now that we no longer require a dual ABI.
ASTERISK-24974 #close
Reported by: Corey Farrell
Change-Id: Icf3552721fe999365ba8a8cf00a965aa6b897cc1
|
|
This change modifies how the the output from a CLI command is sent
to a client over AMI.
Output from the CLI command is now sent as a series of zero-or-more
Output: headers.
Additionally, commands that fail to execute (eg: no such command,
invalid syntax etc.) now cause an Error response instead of Success.
If the command executed successfully, but the manager unable to
provide the output the reason will be included in the Message:
header. Otherwise it will contain 'Command output follows'.
Depends on a new version of starpy (> 1.0.2) that supports the new
output format.
See pull-request https://github.com/asterisk/starpy/pull/34
ASTERISK-24730
Change-Id: I6718d95490f0a6b3f171c1a5cdad9207f9a44888
|
|
Git does not support the ability to replace a token with a version
string during check-in. While it does have support for replacing a
token on clone, this is somewhat sub-optimal: the token is replaced
with the object hash, which is not particularly easy for human
consumption. What's more, in practice, the source file version was often
not terribly useful. Generally, when triaging bugs, the overall version
of Asterisk is far more useful than an individual SVN version of a file. As a
result, this patch removes Asterisk's support for showing source file
versions.
Specifically, it does the following:
* Rename ASTERISK_FILE_VERSION macro to ASTERISK_REGISTER_FILE, and
remove passing the version in with the macro. Other facilities
than 'core show file version' make use of the file names, such as
setting a debug level only on a specific file. As such, the act of
registering source files with the Asterisk core still has use. The
macro rename now reflects the new macro purpose.
* main/asterisk:
- Refactor the file_version structure to reflect that it no longer
tracks a version field.
- Remove the "core show file version" CLI command. Without the file
version, it is no longer useful.
- Remove the ast_file_version_find function. The file version is no
longer tracked.
- Rename ast_register_file_version/ast_unregister_file_version to
ast_register_file/ast_unregister_file, respectively.
* main/manager: Remove value from the Version key of the ModuleCheck
Action. The actual key itself has not been removed, as doing so would
absolutely constitute a backwards incompatible change. However, since
the file version is no longer tracked, there is no need to attempt to
include it in the Version key.
* UPGRADE: Add notes for:
- Modification to the ModuleCheck AMI Action
- Removal of the "core show file version" CLI command
Change-Id: I6cf0ff280e1668bf4957dc21f32a5ff43444a40e
|
|
Switch logger callid's from AO2 objects to simple integers.
This helps in two ways. Copying integers is faster than
referencing AO2 objects, so this will result in a small
reduction in logger overhead. This also erases the possibility
of an infinate loop caused by an invalid callid in
threadstorage.
ASTERISK-24833 #comment Committed callid conversion to trunk.
Reported by: Corey Farrell
Review: https://reviewboard.asterisk.org/r/4466/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@432834 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
The distinctive ring feature interferes with detecting Caller ID and
appears to have been broken for years. What happens is if you have a
ring-ring cadence as used in the UK you get too many DAHDI events for the
distinctive ring pattern array and Caller ID detection is aborted. I
think when Zapata/DAHDI added the ring begin event it broke distinctive
ring. More events happen than before and the code does no filtering of
which event times are recorded in the pattern array.
* Made distinctive ring only record the ringt count when the ring ends
instead of on just any DAHDI event. Distinctive ring can be ring,
ring-ring, ring-ring-ring, or different ring durations for the up to three
rings.
* Fixed the distinctive ring detection enable (chan_dahdi.conf option
usedistinctiveringdetection) to be per port instead of somewhat per port
and somewhat global. This has been broken since v1.8.
* Fixed using the default distinctive ring context when the detected
pattern does not match any configured dringX patterns. The default
context did not get set when the previous call was a matched distinctive
ring pattern and the current call is not matched. This has been broken
since v1.8.
* Made distinctive ring have no effect on Caller ID detection when it is
disabled. Caller ID detection just monitors for 10 seconds before giving
up.
* Fixed leak of struct callerid_state memory when a polarity reversal
during Caller ID detection causes the incoming call to be aborted.
DAHDI-1143
AST-1545
ASTERISK-24825 #close
Reported by: Richard Mudgett
ASTERISK-17588
Reported by: Daniel Flounders
Review: https://reviewboard.asterisk.org/r/4444/
........
Merged revisions 432530 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 432534 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@432551 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@420497 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
The previous behavior was to simply set the accountcode of an outgoing
channel to the accountcode of the channel initiating the call. It was
done this way a long time ago to allow the accountcode set on the SIP/100
channel to be propagated to a local channel so the dialplan execution on
the Local;2 channel would have the SIP/100 accountcode available.
SIP/100 -> Local;1/Local;2 -> SIP/200
Propagating the SIP/100 accountcode to the local channels is very useful.
Without any dialplan manipulation, all channels in this call would have
the same accountcode.
Using dialplan, you can set a different accountcode on the SIP/200 channel
either by setting the accountcode on the Local;2 channel or by the Dial
application's b(pre-dial), M(macro) or U(gosub) options, or by the
FollowMe application's b(pre-dial) option, or by the Queue application's
macro or gosub options. Before Asterisk v12, the altered accountcode on
SIP/200 will remain until the local channels optimize out and the
accountcode would change to the SIP/100 accountcode.
Asterisk v1.8 attempted to add peeraccount support but ultimately had to
punt on the support. The peeraccount support was rendered useless because
of how the CDR code needed to unconditionally force the caller's
accountcode onto the peer channel's accountcode. The CEL events were thus
intentionally made to always use the channel's accountcode as the
peeraccount value.
With the arrival of Asterisk v12, the situation has improved somewhat so
peeraccount support can be made to work. Using the indicated example, the
the accountcode values become as follows when the peeraccount is set on
SIP/100 before calling SIP/200:
SIP/100 ---> Local;1 ---- Local;2 ---> SIP/200
acct: 100 \/ acct: 200 \/ acct: 100 \/ acct: 200
peer: 200 /\ peer: 100 /\ peer: 200 /\ peer: 100
If a channel already has an accountcode it can only change by the
following explicit user actions:
1) A channel originate method that can specify an accountcode to use.
2) The calling channel propagating its non-empty peeraccount or its
non-empty accountcode if the peeraccount was empty to the outgoing
channel's accountcode before initiating the dial. e.g., Dial and
FollowMe. The exception to this propagation method is Queue. Queue will
only propagate peeraccounts this way only if the outgoing channel does not
have an accountcode.
3) Dialplan using CHANNEL(accountcode).
4) Dialplan using CHANNEL(peeraccount) on the other end of a local
channel pair.
If a channel does not have an accountcode it can get one from the
following places:
1) The channel driver's configuration at channel creation.
2) Explicit user action as already indicated.
3) Entering a basic or stasis-mixing bridge from a peer channel's
peeraccount value.
You can specify the accountcode for an outgoing channel by setting the
CHANNEL(peeraccount) before using the Dial, FollowMe, and Queue
applications. Queue adds the wrinkle that it will not overwrite an
existing accountcode on the outgoing channel with the calling channels
values.
Accountcode and peeraccount values propagate to an outgoing channel before
dialing. Accountcodes also propagate when channels enter or leave a basic
or stasis-mixing bridge. The peeraccount value only makes sense for
mixing bridges with two channels; it is meaningless otherwise.
* Made peeraccount functional by changing accountcode propagation as
described above.
* Fixed CEL extracting the wrong ie value for the peeraccount. This was
done intentionally in Asterisk v1.8 when that version had to punt on
peeraccount.
* Fixed a few places dealing with accountcodes that were reading from
channels without the lock held.
AFS-65 #close
Review: https://reviewboard.asterisk.org/r/3601/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@419520 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
In the old times media formats were represented using a bit field. This was
fast but had a few limitations.
1. Asterisk was limited in how many formats it could handle.
2. Formats, being a bit field, could not include any attribute information.
A format was strictly its type, e.g., "this is ulaw".
This was changed in Asterisk 10 (see
https://wiki.asterisk.org/wiki/display/AST/Media+Architecture+Proposal for
notes on that work) which led to the creation of the ast_format structure.
This structure allowed Asterisk to handle attributes and bundle information
with a format.
Additionally, ast_format_cap was created to act as a container for multiple
formats that, together, formed the capability of some entity. Another
mechanism was added to allow logic to be registered which performed format
attribute negotiation. Everywhere throughout the codebase Asterisk was
changed to use this strategy.
Unfortunately, in software, there is no free lunch. These new capabilities
came at a cost.
Performance analysis and profiling showed that we spend an inordinate
amount of time comparing, copying, and generally manipulating formats and
their related structures. Basic prototyping has shown that a reasonably
large performance improvement could be made in this area. This patch is the
result of that project, which overhauled the media format architecture
and its usage in Asterisk to improve performance.
Generally, the new philosophy for handling formats is as follows:
* The ast_format structure is reference counted. This removed a large amount
of the memory allocations and copying that was done in prior versions.
* In order to prevent race conditions while keeping things performant, the
ast_format structure is immutable by convention and lock-free. Violate this
tenet at your peril!
* Because formats are reference counted, codecs are also reference counted.
The Asterisk core generally provides built-in codecs and caches the
ast_format structures created to represent them. Generally, to prevent
inordinate amounts of module reference bumping, codecs and formats can be
added at run-time but cannot be removed.
* All compatibility with the bit field representation of codecs/formats has
been moved to a compatibility API. The primary user of this representation
is chan_iax2, which must continue to maintain its bit-field usage of formats
for interoperability concerns.
* When a format is negotiated with attributes, or when a format cannot be
represented by one of the cached formats, a new format object is created or
cloned from an existing format. That format may have the same codec
underlying it, but is a different format than a version of the format with
different attributes or without attributes.
* While formats are reference counted objects, the reference count maintained
on the format should be manipulated with care. Formats are generally cached
and will persist for the lifetime of Asterisk and do not explicitly need
to have their lifetime modified. An exception to this is when the user of a
format does not know where the format came from *and* the user may outlive
the provider of the format. This occurs, for example, when a format is read
from a channel: the channel may have a format with attributes (hence,
non-cached) and the user of the format may last longer than the channel (if
the reference to the channel is released prior to the format's reference).
For more information on this work, see the API design notes:
https://wiki.asterisk.org/wiki/display/AST/Media+Format+Rewrite
Finally, this work was the culmination of a large number of developer's
efforts. Extra thanks goes to Corey Farrell, who took on a large amount of the
work in the Asterisk core, chan_sip, and was an invaluable resource in peer
reviews throughout this project.
There were a substantial number of patches contributed during this work; the
following issues/patch names simply reflect some of the work (and will cause
the release scripts to give attribution to the individuals who work on them).
Reviews:
https://reviewboard.asterisk.org/r/3814
https://reviewboard.asterisk.org/r/3808
https://reviewboard.asterisk.org/r/3805
https://reviewboard.asterisk.org/r/3803
https://reviewboard.asterisk.org/r/3801
https://reviewboard.asterisk.org/r/3798
https://reviewboard.asterisk.org/r/3800
https://reviewboard.asterisk.org/r/3794
https://reviewboard.asterisk.org/r/3793
https://reviewboard.asterisk.org/r/3792
https://reviewboard.asterisk.org/r/3791
https://reviewboard.asterisk.org/r/3790
https://reviewboard.asterisk.org/r/3789
https://reviewboard.asterisk.org/r/3788
https://reviewboard.asterisk.org/r/3787
https://reviewboard.asterisk.org/r/3786
https://reviewboard.asterisk.org/r/3784
https://reviewboard.asterisk.org/r/3783
https://reviewboard.asterisk.org/r/3778
https://reviewboard.asterisk.org/r/3774
https://reviewboard.asterisk.org/r/3775
https://reviewboard.asterisk.org/r/3772
https://reviewboard.asterisk.org/r/3761
https://reviewboard.asterisk.org/r/3754
https://reviewboard.asterisk.org/r/3753
https://reviewboard.asterisk.org/r/3751
https://reviewboard.asterisk.org/r/3750
https://reviewboard.asterisk.org/r/3748
https://reviewboard.asterisk.org/r/3747
https://reviewboard.asterisk.org/r/3746
https://reviewboard.asterisk.org/r/3742
https://reviewboard.asterisk.org/r/3740
https://reviewboard.asterisk.org/r/3739
https://reviewboard.asterisk.org/r/3738
https://reviewboard.asterisk.org/r/3737
https://reviewboard.asterisk.org/r/3736
https://reviewboard.asterisk.org/r/3734
https://reviewboard.asterisk.org/r/3722
https://reviewboard.asterisk.org/r/3713
https://reviewboard.asterisk.org/r/3703
https://reviewboard.asterisk.org/r/3689
https://reviewboard.asterisk.org/r/3687
https://reviewboard.asterisk.org/r/3674
https://reviewboard.asterisk.org/r/3671
https://reviewboard.asterisk.org/r/3667
https://reviewboard.asterisk.org/r/3665
https://reviewboard.asterisk.org/r/3625
https://reviewboard.asterisk.org/r/3602
https://reviewboard.asterisk.org/r/3519
https://reviewboard.asterisk.org/r/3518
https://reviewboard.asterisk.org/r/3516
https://reviewboard.asterisk.org/r/3515
https://reviewboard.asterisk.org/r/3512
https://reviewboard.asterisk.org/r/3506
https://reviewboard.asterisk.org/r/3413
https://reviewboard.asterisk.org/r/3410
https://reviewboard.asterisk.org/r/3387
https://reviewboard.asterisk.org/r/3388
https://reviewboard.asterisk.org/r/3389
https://reviewboard.asterisk.org/r/3390
https://reviewboard.asterisk.org/r/3321
https://reviewboard.asterisk.org/r/3320
https://reviewboard.asterisk.org/r/3319
https://reviewboard.asterisk.org/r/3318
https://reviewboard.asterisk.org/r/3266
https://reviewboard.asterisk.org/r/3265
https://reviewboard.asterisk.org/r/3234
https://reviewboard.asterisk.org/r/3178
ASTERISK-23114 #close
Reported by: mjordan
media_formats_translation_core.diff uploaded by kharwell (License 6464)
rb3506.diff uploaded by mjordan (License 6283)
media_format_app_file.diff uploaded by kharwell (License 6464)
misc-2.diff uploaded by file (License 5000)
chan_mild-3.diff uploaded by file (License 5000)
chan_obscure.diff uploaded by file (License 5000)
jingle.diff uploaded by file (License 5000)
funcs.diff uploaded by file (License 5000)
formats.diff uploaded by file (License 5000)
core.diff uploaded by file (License 5000)
bridges.diff uploaded by file (License 5000)
mf-codecs-2.diff uploaded by file (License 5000)
mf-app_fax.diff uploaded by file (License 5000)
mf-apps-3.diff uploaded by file (License 5000)
media-formats-3.diff uploaded by file (License 5000)
ASTERISK-23715
rb3713.patch uploaded by coreyfarrell (License 5909)
rb3689.patch uploaded by mjordan (License 6283)
ASTERISK-23957
rb3722.patch uploaded by mjordan (License 6283)
mf-attributes-3.diff uploaded by file (License 5000)
ASTERISK-23958
Tested by: jrose
rb3822.patch uploaded by coreyfarrell (License 5909)
rb3800.patch uploaded by jrose (License 6182)
chan_sip.diff uploaded by mjordan (License 6283)
rb3747.patch uploaded by jrose (License 6182)
ASTERISK-23959 #close
Tested by: sgriepentrog, mjordan, coreyfarrell
sip_cleanup.diff uploaded by opticron (License 6273)
chan_sip_caps.diff uploaded by mjordan (License 6283)
rb3751.patch uploaded by coreyfarrell (License 5909)
chan_sip-3.diff uploaded by file (License 5000)
ASTERISK-23960 #close
Tested by: opticron
direct_media.diff uploaded by opticron (License 6273)
pjsip-direct-media.diff uploaded by file (License 5000)
format_cap_remove.diff uploaded by opticron (License 6273)
media_format_fixes.diff uploaded by opticron (License 6273)
chan_pjsip-2.diff uploaded by file (License 5000)
ASTERISK-23966 #close
Tested by: rmudgett
rb3803.patch uploaded by rmudgetti (License 5621)
chan_dahdi.diff uploaded by file (License 5000)
ASTERISK-24064 #close
Tested by: coreyfarrell, mjordan, opticron, file, rmudgett, sgriepentrog, jrose
rb3814.patch uploaded by rmudgett (License 5621)
moh_cleanup.diff uploaded by opticron (License 6273)
bridge_leak.diff uploaded by opticron (License 6273)
translate.diff uploaded by file (License 5000)
rb3795.patch uploaded by rmudgett (License 5621)
tls_fix.diff uploaded by mjordan (License 6283)
fax-mf-fix-2.diff uploaded by file (License 5000)
rtp_transfer_stuff uploaded by mjordan (License 6283)
rb3787.patch uploaded by rmudgett (License 5621)
media-formats-explicit-translate-format-3.diff uploaded by file (License 5000)
format_cache_case_fix.diff uploaded by opticron (License 6273)
rb3774.patch uploaded by rmudgett (License 5621)
rb3775.patch uploaded by rmudgett (License 5621)
rtp_engine_fix.diff uploaded by opticron (License 6273)
rtp_crash_fix.diff uploaded by opticron (License 6273)
rb3753.patch uploaded by mjordan (License 6283)
rb3750.patch uploaded by mjordan (License 6283)
rb3748.patch uploaded by rmudgett (License 5621)
media_format_fixes.diff uploaded by opticron (License 6273)
rb3740.patch uploaded by mjordan (License 6283)
rb3739.patch uploaded by mjordan (License 6283)
rb3734.patch uploaded by mjordan (License 6283)
rb3689.patch uploaded by mjordan (License 6283)
rb3674.patch uploaded by coreyfarrell (License 5909)
rb3671.patch uploaded by coreyfarrell (License 5909)
rb3667.patch uploaded by coreyfarrell (License 5909)
rb3665.patch uploaded by mjordan (License 6283)
rb3625.patch uploaded by coreyfarrell (License 5909)
rb3602.patch uploaded by coreyfarrell (License 5909)
format_compatibility-2.diff uploaded by file (License 5000)
core.diff uploaded by file (License 5000)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@419044 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This moves all samples configs from configs/ to configs/samples. This allows
for additional sets of sample configuration files to be added in the future.
Review: https://reviewboard.asterisk.org/r/3804/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@418870 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
progressinband=never in sip.conf is easily defeated if an onward trunk sends a
progress indication of its own. This is almost certain to happen if the onward
trunk is ISDN or IAX as these technologies send a progress indication even if
early media is not required. This progress message is passed to the caller,
and causes the "never" option to be rather badly named.
This patch changes the behaviour of this setting in the following ways:
1) In sip_write(), do not pass the media unless we have either progressed
beyond INV_EARLY_MEDIA, or we are in INV_EARLY_MEDIA state, and early
media is both set-up and wanted. This helps resolve double-ringing on some
buggy handsets.
2) In sip_indicate(), if we see AST_CONTROL_PROGRESS, but
SIP_PROG_INBAND_NEVER is set, send a 180 Ringing instead to avoid implicitly
enabling early media. Avoid sending double ring indications.
NOTE: the meaning of the SIP_PROGRESS_SENT flag changes slightly in this patch
to also encapsulate the fact that a channel has *sent or received* a 183
Progress indication. This makes the updated code in sip_write() much more
simple.
Review: https://reviewboard.asterisk.org/r/3700
ASTERISK-23972 #close
Reported by: Steve Davies
patches:
inband_never_present_early_media2 uploaded by Steve Davies (License 5012)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@418868 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
The commit that added libxml2 support didn't fully check for the libxml2
development script in the Asterisk configure file. As a result, Asterisk could
be configured, then fail on menuselect. This patch fixes it so that Asterisk
should detect the libxml2 dependency failure first.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@418850 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This is the final patch in adding menuselect to Asterisk.
- The first patch (r418832) added menuselect along with mxml
- The second patch (r418833) removed mxml from menuselect
This patch adds support for libxml2 to menuselect, and makes libxml2 a
required library for Asterisk.
Note that the libxml2 portion of this patch was written by Sean Bright,
and was made available on a team branch:
http://svn.digium.com/svn/menuselect/team/seanbright/libxml2/
Review: https://reviewboard.asterisk.org/r/3773/
ASTERISK-20703 #close
patches:
some_mysterious_team_branch uploaded by seanbright (License 5060)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@418834 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
When the PresenceState action is executed, the nominal path fails to include
the ActionID in the successful response. This patch adds a call to
astman_start_ack, which guarantees that an ActionID (if provided) will be
sent back to the AMI client.
Unlike the Asterisk 11 and 12 patches, this patch also deprecates the
duplicate Message key in the response to the action, replacing it with the
key 'PresenceMessage'.
Review: https://reviewboard.asterisk.org/r/3776/
ASTERISK-23985 #close
........
Merged revisions 418713 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 418714 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@418717 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Billing records are fair,
To get paid is quite bright,
You should really use ODBC;
Good-bye cdr_sqlite.
Microsoft did once push H.323,
Hell, we all remember NetMeeting.
But try to compile chan_h323 now
And you will take quite a beating.
The XMPP and SIP war was fierce,
And in the distant fray
Was birthed res_jabber/chan_jingle;
But neither to stay.
For everyone did care and chase what Google professed.
"Free Internet Calling" was what devotees cried,
But Google did change the specs so often
That the developers were happy the day chan_gtalk died.
And then there was that odd application
Dedicated to the Polish tongue.
app_saycountpl was subsumed by Say;
One could say its bell was rung.
To read and parse a file from the dialplan
You could (I guess) use an application.
app_readfile did fill that purpose, but I think
A function is perhaps better in its creation.
Barging is rude, I'm not sure why we do it.
Inwardly, the caller will probably sigh.
But if you really must do it,
Don't use app_dahdibarge, use ChanSpy.
We all despise the sound of tinny robots
It makes our queues so cold.
To control such an abomination
It's better to not use Wait/SetMusicOnHold.
It's often nice to know properties of a channel
It makes our calls right
We have a nice function called CHANNEL
And so SIPCHANINFO is sent off into the night.
And now things get odd;
Apparently one could delimit with a colon
Properties from the SIPPEER function!
Commas are in; all others are done.
Finally, a word on pipes and commas.
We're sorry. We can't say it enough.
But those compatibility options in asterisk.conf;
To maintain them forever was just too tough.
This patch removes:
* cdr_sqlite
* chan_gtalk
* chan_jingle
* chan_h323
* res_jabber
* app_saycountpl
* app_readfile
* app_dahdibarge
It removes the following applications/functions:
* WaitMusicOnHold
* SetMusicOnHold
* SIPCHANINFO
It removes the colon delimiter from the SIPPEER function.
Finally, it also removes all compatibility options that were configurable from
asterisk.conf, as these all applied to compatibility with Asterisk 1.4 systems.
Review: https://reviewboard.asterisk.org/r/3698/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@418019 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
The new inband_on_setup_ack option causes Asterisk to assume inband audio
may be present when a SETUP_ACKNOWLEDGE message is received.
Q.931 Section 5.1.3 says that in scenarios with overlap dialing, when a
dialtone is sent from the network side, progress indicator 8 "Inband info
now available" MAY be sent to the CPE if no digits were received with the
SETUP. It is thus implied that the ie is mandatory if digits came with
the SETUP and dialtone is needed. This option should be enabled, when the
network sends dialtone and you want to hear it, but the network doesn't
send the progress indicator when needed.
NOTE: For Q.SIG setups this option should be enabled when outgoing overlap
dialing is also enabled because Q.SIG does not send the progress indicator
with the SETUP ACK.
The commit -r413714 (AST-1338) which causes this issue was dealing with a
SIP-to-ISDN interoperability issue.
This commit is a merge of the two patches indicated below.
ASTERISK-23897 #close
Reported by: Pavel Troller
Patches:
pri-4.diff (license #6302) patch uploaded by Pavel Troller
jira_asterisk_23897_v11.patch (license #5621) patch uploaded by rmudgett
Review: https://reviewboard.asterisk.org/r/3633/
........
Merged revisions 417956 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 417957 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 417958 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@417976 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Persistent HTTP connection support is needed due to the increased usage of
the Asterisk core HTTP transport and the frequency at which REST API calls
are going to be issued.
* Add http.conf session_keep_alive option to enable persistent
connections.
* Parse and discard optional chunked body extension information and
trailing request headers.
* Increased the maximum application/json and
application/x-www-form-urlencoded body size allowed to 4k. The previous
1k was kind of small.
* Removed a couple inlined versions of ast_http_manid_from_vars() by
calling the function. manager.c:generic_http_callback() and
res_http_post.c:http_post_callback()
* Add missing va_end() in ast_ari_response_error().
* Eliminated unnecessary RAII_VAR() use in http.c:auth_create().
ASTERISK-23552 #close
Reported by: Scott Griepentrog
Review: https://reviewboard.asterisk.org/r/3691/
........
Merged revisions 417880 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@417901 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
When a client takes a long time to process information received from Asterisk,
a write operation using fwrite may fail to write all information. This causes
the underlying file stream to be in an unknown state, such that the socket
must be disconnected. Unfortunately, there are two problems with this in
Asterisk's existing websocket code:
1. Periodically, during the read loop, Asterisk must write to the connected
websocket to respond to pings. As such, Asterisk maintains a reference to
the session during the loop. When ast_http_websocket_write fails, it may
cause the session to decrement its ref count, but this in and of itself
does not break the read loop. The read loop's write, on the other hand,
does not break the loop if it fails. This causes the socket to get in a
'stuck' state, preventing the client from reconnecting to the server.
2. More importantly, however, is that the fwrite in ast_http_websocket_write
fails with a large volume of data when the client takes awhile to process
the information. When it does fail, it fails writing only a portion of
the bytes. With some debugging, it was shown that this was failing in a
similar fashion to ASTERISK-12767. Switching this over to ast_careful_fwrite
with a long enough timeout solved the problem.
Note that this version of the patch, unlike r417310 in Asterisk 11, exposes
configuration options beyond just chan_sip's sip.conf. Configuration options
to configure the write timeout have also been added to pjsip.conf and ari.conf.
#ASTERISK-23917 #close
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/3624/
........
Merged revisions 417310 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 417311 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@417317 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
* SS7 support now requires libss7 v2.0 or later. The new libss7 is not
backwards compatible.
* Added SS7 support for connected line and redirecting.
* Most SS7 CLI commands are reworked as well as new SS7 commands added.
See online CLI help.
* Added several SS7 config option parameters described in
chan_dahdi.conf.sample.
* ISUP timer support reworked and now requires explicit configuration.
See ss7.timers.sample.
Special thanks to Kaloyan Kovachev for his support and persistence in
getting the original patch by adomjan updated and ready for release.
SS7-27 #close
Reported by: adomjan
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@416416 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Simply establishing a TCP connection and never sending anything to the
configured HTTP port in http.conf will tie up a HTTP connection. Since
there is a maximum number of open HTTP sessions allowed at a time you can
block legitimate connections.
A similar problem exists if a HTTP request is started but never finished.
* Added http.conf session_inactivity timer option to close HTTP
connections that aren't doing anything. Defaults to 30000 ms.
* Removed the undocumented manager.conf block-sockets option. It
interferes with TCP/TLS inactivity timeouts.
* AMI and SIP TLS connections now have better authentication timeout
protection. Though I didn't remove the bizzare TLS timeout polling code
from chan_sip.
* chan_sip can now handle SSL certificate renegotiations in the middle of
a session. It couldn't do that before because the socket was non-blocking
and the SSL calls were not restarted as documented by the OpenSSL
documentation.
* Fixed an off nominal leak of the ssl struct in
handle_tcptls_connection() if the FILE stream failed to open and the SSL
certificate negotiations failed.
The patch creates a custom FILE stream handler to give the created FILE
streams inactivity timeout and timeout after a specific moment in time
capability. This approach eliminates the need for code using the FILE
stream to be redesigned to deal with the timeouts.
This patch indirectly fixes most of ASTERISK-18345 by fixing the usage of
the SSL_read/SSL_write operations.
ASTERISK-23673 #close
Reported by: Richard Mudgett
........
Merged revisions 415841 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 415854 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 415896 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@415907 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
MixMonitor AMI commands StartMixMonitor and StopMixMonitor lacked class
authorization. StopMixMonitor now requires that the manager user either have
the call or system class authorization. StartMixMonitor is a slightly larger
issue since it can execute shell commands if the right arguments are passed
into it, and we consider this a permission escalation. A security release
will be issued for problem this shortly.
ASTERISK-23609 #close
Reported by: Corey Farrell
........
Merged revisions 415825 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 415832 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@415834 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
From now on, make install will overwrite safe_asterisk with the
latest version. You need to move any local modifications to files
inside /etc/asterisk/startup.d, if you have any.
See also commits r394939 and r397938.
ASTERISK-21965 #close
Patches:
safe_asterisk.patch uploaded by jkister (License 6232, modified by me)
........
Merged revisions 415748 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@415749 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
* Replaced a stray echo that should've been a message call in
safe_asterisk. This replaces a conditional log message by a slightly
different message. Please update your log parsing scripts.
* Made the $NOTIFY mail Subject more verbose by adding the machine name
and exitstatus.
(Note that a 'make install' still won't overwrite your old safe_asterisk
if it exists. See ASTERISK-21965.)
ASTERISK-23492 #close
........
Merged revisions 415521 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 415522 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 415523 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@415524 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
........
Merged revisions 414345 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 414346 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 414347 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@414348 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Per rfc3892, the Referred-By header in a REFER must be copied into the
referenced request (IE. The outgoing INVITE to the transfer target).
* Automatically put the Referred-By header in the outgoing INVITE message
if the SIPREFERREDBYHDR channel variable is defined with a value.
* Made chan_sip.c:get_refer_info() set SIPREFERREDBYHDR for inheritance so
chan_pjsip has a better chance to interoperate.
* Fixed refer_blind_callback() and refer_incoming_refer_request() to not
modify the data in the pointer returned by pjsip_msg_find_hdr_by_name().
It seems wrong to modify that data since the calling routine doesn't own
the buffer.
ASTERISK-23501 #close
Reported by: John Bigelow
Review: https://reviewboard.asterisk.org/r/3514/
........
Merged revisions 413210 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@413211 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
1) Added the unistim.conf variable dtmf_duration which can select the DTMF playback duration from 0ms to 150ms (0 is off and is the new default)
2) Enabled the transmission of month names, which are sent with the date and changed the dateformat variable to accept the values 0-3 as per the UNISTIM standard (2 & 3 match the previous 1 & 2 formats).
3) Enabled the "Mute" packet so muting microphone works as expected and microphone muted for all calls while LED light on
4) Changed Duree to Timer on i2004 display
(closes issue ASTERISK-23592)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@413048 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This patch does the following:
(1) It makes REF_DEBUG a meneselect item. Enabling REF_DEBUG now enables
REF_DEBUG globally throughout Asterisk.
(2) The ref debug log file is now created in the AST_LOG_DIR directory.
Every run will now blow away the previous run (as large ref files
sometimes caused issues). We now also no longer open/close the file
on each write, instead relying on fflush to make sure data gets written
to the file (in case the ao2 call being performed is about to cause a
crash)
(3) It goes with a comma delineated format for the ref debug file. This
makes parsing much easier. This also now includes the thread ID of the
thread that caused ref change.
(4) A new python script instead for refcounting has been added in the
contrib/scripts folder.
(5) The old refcounter implementation in utils/ has been removed.
Review: https://reviewboard.asterisk.org/r/3377/
........
Merged revisions 412114 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 412115 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 412153 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@412154 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
module is loaded.
The masquerade supertest frequently fails because either the local channel
chain doesn't completely optimize out or the DTMF handshake doesn't
completely get accross. Local channel optimization requires frames
flowing to trigger when optimization can happen. When optimization
happens the media frame that triggered the optimization is dropped.
Sending DTMF requires frames to flow in the other direction for timing
purposes while sending nothing. If internal timing is not enabled when
MOH is playing, Asterisk switches to received timing when an audio frame
is received. With optimization dropping media frames and MOH not sending
frames unless it receives frames, occasionaly there are no more frames
being passed and the test fails.
* The asterisk command line -I option and the asterisk.conf
internal_timing option are removed. Asterisk now always uses internal
timing when needed if any timing module is loaded. The issue
ASTERISK-14861 did this quite awhile ago in v1.4 but effectively is broken
if other internal timing modules besides DAHDI are used. The
ast_read_generator_actions() now only does received timing if it has no
choice for frame generators like MOH, silence, and playback streaming.
* Cleaned up some code dealing with frame generators in
ast_deactivate_generator(), generator_write_format_change(),
ast_activate_generator(), and ast_channel_stop_silence_generator().
* Removed ast_internal_timing_enabled(), AST_OPT_FLAG_INTERNAL_TIMING, and
ast_opt_internal_timing.
ASTERISK-22846 #close
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/3414/
........
Merged revisions 411715 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 411716 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 411717 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@411724 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This patch does the following:
* It updates the AMI version to 2.2.0 to indicate backwards compatible
changes have been made since the last release
* It updates the ARI version to 1.2.0 to indicate backwards compatible
changes have been made since the last release
* It updates the UPGRADE/CHANGES files with changes that were not
mentioned
........
Merged revisions 411529 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@411530 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
check in update_odbc.
This patch fixes setting nullable integer columns to NULL instead of an empty
string, which fails for PostgreSQL, for example. The current code is supposed
to do so, but the check is broken. The patch also allows the first column in
the list to be a nullable integer.
Also, the check for existence of a mandatory column checked for the first
column in the list instead of the key field lookup column. This patch fixes
that issue as well.
Finally, the compatibility option allow_empty_string_in_nontext, which was
added to previous revisions to allow for some database backends with certain
schemas to function, has been removed.
Review: https://reviewboard.asterisk.org/r/3335
ASTERISK-23459 #close
ASTERISK-23351 #close
(closes issue ASTERISK-23459)
Reported by: zvision
patches:
res_config_odbc.diff uploaded by zvision (License 5755)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@411515 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
........
Merged revisions 411457 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 411458 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 411459 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@411460 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
........
Merged revisions 411157 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@411158 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Transport TOS values were interpreted as DSCP values without being documented
as such. Endpoint TOS values (tos_audio/tos_video) behaved normally as TOS
values have historically. This patch makes the transport TOS values behave as
TOS values and makes all TOS values readable as string values (e.g. AF11).
In addition, alembic scripts have been updated to use the proper field types
for all TOS/COS values.
(issue ASTERISK-23235)
Reported by: George Joseph
Review: https://reviewboard.asterisk.org/r/3304/
........
Merged revisions 410028 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@410029 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
When an endpoint sends a REGISTER request to Asterisk, we now will
associate the User-Agent header with all contacts that were bound in
that REGISTER request.
........
Merged revisions 408270 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@408272 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Currently, when the first marked user enters the conference that
contains waitmarked users, a prompt is played indicating that the user
is being placed into the conference. Unfortunately, this prompt is
played to the marked user and not the waitmarked users which is not
very helpful.
This patch changes that behavior to play a prompt stating
"The conference will now begin" to the entire conference after adding
and unmuting the waitmarked users since the design of confbridge is not
conducive to playing a prompt to a subset of users in a conference in
an asynchronous manner.
(closes issue PQ-1396)
Review: https://reviewboard.asterisk.org/r/3155/
Reported by: Steve Pitts
........
Merged revisions 407857 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 407858 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@407859 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This patch adds documentation for the Security Events that are emited over
AMI. It also notes these events in the UPGRADE/CHANGES file.
........
Merged revisions 407589 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@407602 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Due to backwards compatible changes made to AMI/ARI, the version needs to
be bumped to 1.1.0/2.1.0, respectively.
........
Merged revisions 407402 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@407407 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This patch fixes a number of small-ish problems that were noticed when
witnessing the records that the FreePBX dialplan produces:
(1) Mid-call events (as well as privacy options) have the ability to change the
overall state of the Dial operation after the called party answers. This
means that publishing the DialEnd event when the called party is premature;
we have to wait for the execution of these subroutines to complete before
we can signal the overall status of the DialEnd. This patch moves that
publication and adds handlers for the mid-call events.
(2) The AST_FLAG_OUTGOING channel flag is cleared if an after bridge goto
datastore is detected. This flag was preventing CDRs from being recorded
for all outbound channels that had a 'continue' option enabled on them by
the Dial application.
(3) The CDR engine now locks the 'Dial' application as being the CDR
application if it detects that the current CDR has entered that app. This
is similar to the logic that is done for Parking. In general, if we entered
into Dial, then we want that CDR to record the application as such - this
prevents pre-dial handlers, mid-call handlers, and other shenaniganry
from changing the application value.
(4) The CDR engine now checks for the AST_SOFTHANGUP_HANGUP_EXEC in more places
to determine if the channel is in hangup logic or dead. In either case, we
don't want to record changes in the channel.
(5) The default option for "endbeforehexten" has been changed to "yes". In
general, you don't want to see CDRs in the 'h' exten or in hangup logic.
Since the semantics of that option changed in 12, it made sense to update
the default value as well.
(6) Finally, because we now have the ability to synchronize on the messages
published to the CDR topic, on shutdown the CDR engine will now synchronize
to the messages currently in flight. This helps to ensure that all
in-flight CDRs are written before shutting down.
(closes issue ASTERISK-23164)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/3154
........
Merged revisions 407084 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@407085 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Added a "debug" configuration option for res_pjsip that when set to "yes"
enables SIP messages to be logged. It is specified under the "system" type.
Also added an alembic script to add the option to realtime.
(closes issue ASTERISK-23038)
Reported by: Rusty Newton
Review: https://reviewboard.asterisk.org/r/3148/
........
Merged revisions 407036 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@407037 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
A couple of the scripts had errors that would not allow a full migration to
take place. The extensions table needed to make its 'id' column a primary
key in order to work with mysql. The other script ...add_endpoints... was
missing tables that it was trying to add columns to.
Added the primary key on id for extensions and added the tables in for the
missing pjsip configuration options. While it is not ideal to modify already
released scripts this was a case where it had to be done due to errors in
the script and lacking a better alternative.
Review: https://reviewboard.asterisk.org/r/3167/
........
Merged revisions 407019 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@407029 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
In pre-trunk versions (...12) it accepts a basic regex, which is
confusing because all other regexes in asterisk are of the
extended kind.
Review: https://reviewboard.asterisk.org/r/3147/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@406618 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
The per console verbose level feature as previously implemented caused a
large performance penalty. The fix required some minor incompatibilities
if the new rasterisk is used to connect to an earlier version. If the new
rasterisk connects to an older Asterisk version then the root console
verbose level is always affected by the "core set verbose" command of the
remote console even though it may appear to only affect the current
console. If an older version of rasterisk connects to the new version
then the "core set verbose" command will have no effect.
* Fixed the verbose performance by not generating a verbose message if
nothing is going to use it and then filtered any generated verbose
messages before actually sending them to the remote consoles.
* Split the "core set debug" and "core set verbose" CLI commands to remove
the per module verbose support that cannot work with the per console
verbose level.
* Added a silent option to the "core set verbose" command.
* Fixed "core set debug off" tab completion.
* Made "core show settings" list the current console verbosity in addition
to the root console verbosity.
* Changed the default verbose level of the 'verbose' setting in the
logger.conf [logfiles] section. The default is now to once again follow
the current root console level. As a result, using the AMI Command action
with "core set verbose" could again set the root console verbose level and
affect the verbose level logged.
(closes issue AST-1252)
Reported by: Guenther Kelleter
Review: https://reviewboard.asterisk.org/r/3114/
........
Merged revisions 405431 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 405432 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@405436 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This simply pulls in the changes that were breaking from the CHANGES file
and updates a few other areas accordingly. It also removes the 10 => 11
notes, which are traditionally removed from each major version and stored
in the appropriate UPGRADE-X.txt file.
........
Merged revisions 398100 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@398101 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
