| Age | Commit message (Collapse) | Author |
|---|
|
to be used within the dial app, before a call is bridged.
Many thanks to sobomax for submitting this patch.
Quoting from bug 11582:
"So the goal of the patch was to use the user configured feature code during the
call setup phase. The original ast_feature_interpret() function is not well suited
for this purpose as it uses much call bridge specific data and doesn't separate a
detection of feature from a feature handler call. So a new function ast_feature_detect()
has been extracted off the ast_feature_interpret() function but keeping the original
logic intact except some insignificant changes to locking.
"Having created the ast_feature_detect() function the possibility to use feature detection
in almost any place of the asterisk code. So a call to this function has been added to
wait_for_answer() function of app_dial.so module. This code doesn't call the feature handler
however and uses old call leg disconnect logic to make the changes as small and simple as
possible to prevent unexpected problems. A disconnect feature currently is the only one
supported during call setup as other features as call parking and call transfer don't make much
sense during call setup. However if need in some of the features would arise it is much easier to
implement as the infrastructure changes are already in place with this patch."
I have cleaned up the patch somewhat, and verified that the existing functionality is not
harmed, and that the new functionality works. Terry has committed his stuff, and there were
no conflicts (see 14274).
(closes issue #11583)
Reported by: sobomax
Patches:
patch-apps__app_dial.c uploaded by sobomax (license 359)
patch-include__asterisk__features.h uploaded by sobomax (license 359)
patch-res__res_features.c uploaded by sobomax (license 359)
enable-features-during-call-setup.diff uploaded by sobomax (license 359)
11583.newdiff uploaded by murf (license 17)
enable-features-during-call-setup-1.diff uploaded by sobomax (license 359)
11583.latest-patch uploaded by murf (license 17)
Tested by: sobomax, murf
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@172890 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r172517 | twilson | 2009-01-30 11:47:41 -0600 (Fri, 30 Jan 2009) | 37 lines
Fix feature inheritance with builtin features
When using builtin features like parking and transfers, the AST_FEATURE_* flags
would not be set correctly for all instances when either performing a builtin
attended transfer, or parking a call and getting the timeout callback. Also,
there was no way on a per-call basis to specify what features someone should
have on picking up a parked call (since that doesn't involve the Dial() command).
There was a global option for setting whether or not all users who pickup a
parked call should have AST_FEATURE_REDIRECT set, but nothing for DISCONNECT,
AUTOMON, or PARKCALL.
This patch:
1) adds the BRIDGE_FEATURES dialplan variable which can be set either in the
dialplan or with setvar in channels that support it. This variable can be set
to any combination of 't', 'k', 'w', and 'h' (case insensitive matching of the
equivalent dial options), to set what features should be activated on this
channel. The patch moves the setting of the features datastores into the
bridging code instead of app_dial to help facilitate this.
2) adds global options parkedcallparking, parkedcallhangup, and
parkedcallrecording to be similar to the parkedcalltransfers option for
globally setting features.
3) has builtin_atxfer call builtin_parkcall if being transfered to the parking
extension since tracking everything through multiple masquerades, etc. is
difficult and error-prone
4) attempts to fix all cases of return calls from parking and completed builtin
transfers not having the correct permissions
(closes issue #14274)
Reported by: aragon
Patches:
fix_feature_inheritence.diff.txt uploaded by otherwiseguy (license 396)
Tested by: aragon, otherwiseguy
Review http://reviewboard.digium.com/r/138/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@172580 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Also, implement a private cause code (as suggested by Tilghman). This works with
chan_sip, but doesn't propagate through chan_local.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@172318 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r170568 | file | 2009-01-23 15:06:54 -0400 (Fri, 23 Jan 2009) | 4 lines
When a call is forwarded stop any active indications. The new channel will provide an indication, if need be, itself.
(closes issue #14310)
Reported by: RadicAlish
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@170569 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@167935 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
When placing a call to a queue which ran a gosub on the member's
channel, Asterisk would crash every time, stemming from the fact
that the member's channel was being hung up unexpectedly when the
Gosub completed. The necessary change was pretty much copied and
pasted from app_dial's similar changes made last week.
I also took the opportunity to change a LOG_DEBUG message in
app_dial to use ast_debug. I am guessing this was due to a direct
merge from 1.4 that was not corrected to use trunk's preferred
syntax.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@166861 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
In order to merge this 1.4 patch into trunk,
I had to resolve some conflicts and wait for
Russell to make some changes to res_agi.
I re-ran all the tests; 39 calls in all, and
made fairly careful notes and comparisons: I
don't want this to blow up some aspect of
asterisk; I completely removed the KEEPALIVE
from the pbx.h decls. The first 3 scenarios
involving feature park; feature xfer to 700;
hookflash park to Park() app call all behave
the same, don't appear to leave hung channels,
and no crashes.
........
r166093 | murf | 2008-12-19 15:30:32 -0700 (Fri, 19 Dec 2008) | 131 lines
This merges the masqpark branch into 1.4
These changes eliminate the need for (and use of)
the KEEPALIVE return code in res_features.c;
There are other places that use this result code
for similar purposes at a higher level, these appear
to be left alone in 1.4, but attacked in trunk.
The reason these changes are being made in 1.4, is
that parking ends a channel's life, in some situations,
and the code in the bridge (and some other places),
was not checking the result code properly, and dereferencing
the channel pointer, which could lead to memory corruption
and crashes.
Calling the masq_park function eliminates this danger
in higher levels.
A series of previous commits have replaced some parking calls
with masq_park, but this patch puts them ALL to rest,
(except one, purposely left alone because a masquerade
is done anyway), and gets rid of the code that tests
the KEEPALIVE result, and the NOHANGUP_PEER result codes.
While bug 13820 inspired this work, this patch does
not solve all the problems mentioned there.
I have tested this patch (again) to make sure I have
not introduced regressions.
Crashes that occurred when a parked party hung up
while the parking party was listening to the numbers
of the parking stall being assigned, is eliminated.
These are the cases where parking code may be activated:
1. Feature one touch (eg. *3)
2. Feature blind xfer to parking lot (eg ##700)
3. Run Park() app from dialplan (eg sip xfer to 700)
(eg. dahdi hookflash xfer to 700)
4. Run Park via manager.
The interesting testing cases for parking are:
I. A calls B, A parks B
a. B hangs up while A is getting the numbers announced.
b. B hangs up after A gets the announcement, but
before the parking time expires
c. B waits, time expires, A is redialed,
A answers, B and A are connected, after
which, B hangs up.
d. C picks up B while still in parking lot.
II. A calls B, B parks A
a. A hangs up while B is getting the numbers announced.
b. A hangs up after B gets the announcement, but
before the parking time expires
c. A waits, time expires, B is redialed,
B answers, A and B are connected, after
which, A hangs up.
d. C picks up A while still in parking lot.
Testing this throroughly involves acting all the permutations
of I and II, in situations 1,2,3, and 4.
Since I added a few more changes (ALL references to KEEPALIVE in the bridge
code eliimated (I missed one earlier), I retested
most of the above cases, and no crashes.
H-extension weirdness.
Current h-extension execution is not completely
correct for several of the cases.
For the case where A calls B, and A parks B, the
'h' exten is run on A's channel as soon as the park
is accomplished. This is expected behavior.
But when A calls B, and B parks A, this will be
current behavior:
After B parks A, B is hung up by the system, and
the 'h' (hangup) exten gets run, but the channel
mentioned will be a derivative of A's...
Thus, if A is DAHDI/1, and B is DAHDI/2,
the h-extension will be run on channel
Parked/DAHDI/1-1<ZOMBIE>, and the
start/answer/end info will be those
relating to Channel A.
And, in the case where A is reconnected to
B after the park time expires, when both parties
hang up after the joyful reunion, no h-exten
will be run at all.
In the case where C picks up A from the
parking lot, when either A or C hang up,
the h-exten will be run for the C channel.
CDR's are a separate issue, and not addressed
here.
As to WHY this strange behavior occurs,
the answer lies in the procedure followed
to accomplish handing over the channel
to the parking manager thread. This procedure
is called masquerading. In the process,
a duplicate copy of the channel is created,
and most of the active data is given to the
new copy. The original channel gets its name
changed to XXX<ZOMBIE> and keeps the PBX
information for the sake of the original
thread (preserving its role as a call
originator, if it had this role to begin
with), while the new channel is without
this info and becomes a call target (a
"peer").
In this case, the parking lot manager
thread is handed the new (masqueraded)
channel. It will not run an h-exten
on the channel if it hangs up while
in the parking lot. The h exten will
be run on the original channel instead,
in the original thread, after the bridge
completes.
See bug 13820 for our intentions as
to how to clean up the h exten behavior.
Review: http://reviewboard.digium.com/r/29/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@166665 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This is part of an effort to completely remove AST_PBX_KEEPALIVE and other
similar return codes from the source. While this usage was perfectly safe,
there are others that are problematic. Since we know ahead of time that
we do not want to PBX to destroy the channel, the PBX API has been changed
so that information can be provided as an argument, instead, thus removing
the need for the KEEPALIVE return value.
Further changes to get rid of KEEPALIVE and related code is being done by
murf. There is a patch up for that on review 29.
Review: http://reviewboard.digium.com/r/98/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@165723 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
for app_dial and app_queue to run a gosub when the call is answered.
* Check for the existence of the gosub target in gosub_exec. If it is nonexistent,
then this will cause errors when we attempt to actually run the gosub, including
a definite memory leak and potential crashes. Return an error in this situation
* Check the return value of pbx_exec in app_dial and app_queue before attempting
to actually run the gosub routine. If there was an error, we should not attempt
to run the gosub.
* Change a '|' to a ',' in app_queue.
* Add some extra curly braces where they had been missing previously.
(closes issue #13548)
Reported by: fiddur
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@160626 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
a call fails
1) Hang up the original destination if the local channel cannot
be requested.
2) Hang up the local channel (in addition to the original destination)
if ast_call fails when calling the newly created local channel.
This prevents channels from sticking around forever in the
case of a botched call forward (e.g. to an extension which does not
exist).
(closes issue #13764)
Reported by: davidw
Patches:
13764_v2.patch uploaded by putnopvut (license 60)
Tested by: putnopvut, davidw
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@159554 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r158053 | mmichelson | 2008-11-20 11:33:06 -0600 (Thu, 20 Nov 2008) | 12 lines
Make sure to set the hangup cause on the calling channel in the case
that ast_call() fails. For incoming SIP channels, this was causing
us to send a 603 instead of a 486 when the call-limit was reached on
the destination channel.
(closes issue #13867)
Reported by: still_nsk
Patches:
13867.diff uploaded by putnopvut (license 60)
Tested by: blitzrage
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@158066 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r157305 | mmichelson | 2008-11-18 12:25:55 -0600 (Tue, 18 Nov 2008) | 12 lines
Fix a crash in the end_bridge_callback of app_dial and
app_followme which would occur at the end of an attended
transfer. The error occurred because we initially stored
a pointer to an ast_channel which then was hung up due
to a masquerade.
This commit adds a "fixup" callback to the bridge_config
structure to allow for end_bridge_callback_data to be
changed in the case that a new channel pointer is needed
for the end_bridge_callback.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@157306 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
a function: in these cases, we have to use the heap, or garbage will result.
(closes issue #13898)
Reported by: alecdavis
Patches:
20081114__bug13898__2.diff.txt uploaded by Corydon76 (license 14)
Tested by: alecdavis
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@157253 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r156386 | tilghman | 2008-11-12 15:18:57 -0600 (Wed, 12 Nov 2008) | 5 lines
When using call limits under 1 second, infinite call lengths are allowed,
instead.
(closes issue #13851)
Reported by: ruddy
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@156388 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r156167 | mmichelson | 2008-11-12 11:38:33 -0600 (Wed, 12 Nov 2008) | 7 lines
When doing some tests, I was having a crash at the end of every call
if an attended transfer occurred during the call. I traced the cause to
the CDR on one of the channels being NULL. murf suggested a check in
the end bridge callback to be sure the CDR is non-NULL before proceeding,
so that's what I'm adding.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@156169 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r155553 | seanbright | 2008-11-08 20:08:07 -0500 (Sat, 08 Nov 2008) | 6 lines
Use static functions here instead of nested ones. This requires a small
change to the ast_bridge_config struct as well. To understand the reason
for this change, see the following post:
http://gcc.gnu.org/ml/gcc-help/2008-11/msg00049.html
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@155554 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
branch, and add the ones needed for all the new code here too
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@153616 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@153468 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This commit introduces the first phase of an effort to manage documentation of the
interfaces in Asterisk in an XML format. Currently, a new format is available for
applications and dialplan functions. A good number of conversions to the new format
are also included.
For more information, see the following message to asterisk-dev:
http://lists.digium.com/pipermail/asterisk-dev/2008-October/034968.html
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@153365 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
variables that were set after ast_bridge_call was called would not show up in the 'h' exten. Added a callback function to handle setting variables, etc. from w/in the bridging code. Calls back into a nested function within the function calling ast_bridge_call
(closes issue #13793)
Reported by: greenfieldtech
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@153181 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r152538 | murf | 2008-10-28 23:19:04 -0600 (Tue, 28 Oct 2008) | 14 lines
A little documentation cross-ref between features and
dial and queue... I wasted some time (stupidly) trying
to get the one-touch parking stuff working, because it
didn't occur to me that I had to also have the corresponding
options in the dial command! Duh! (In all this time, I never
set this up before!)
So, to keep some poor fool from suffering the same fate,
I made the features.conf.sample file mention the corresponding
opts in dial/queue; and the docs for dial/app specifically
mention the corresponding decls in the feature.conf file.
I hope this doesn't spoil some vast, eternal plan...
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@152605 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r152535 | murf | 2008-10-28 22:36:32 -0600 (Tue, 28 Oct 2008) | 46 lines
The magic trick to avoid this crash is not to
try to find the channel by name in the list,
which is slow and resource consuming, but rather
to pay attention to the result codes from the
ast_bridge_call, to which I added the
AST_PBX_NO_HANGUP_PEER_PARKED value, which
now are returned when a channel is parked.
Why? because CDR's aren't generated via parking,
so nothing is needed, but if a transfer occurred,
there are critical things I need.
If you get AST_PBX_KEEPALIVE,
then don't touch the channel pointer.
If you get AST_PBX_NO_HANGUP_PEER, or
AST_PBX_NO_HANGUP_PEER_PARKED, then don't
touch the peer pointer.
Updated the several places where the results
from a bridge were not being properly obeyed,
and fixed some code I had introduced so that
the results of the bridge were not overridden
(in trunk).
All the places that previously tested for
AST_PBX_NO_HANGUP_PEER now have to check for
both AST_PBX_NO_HANGUP_PEER and AST_PBX_NO_HANGUP_PEER_PARKED.
I tested this against the 4 common parking
scenarios:
1. A calls B; B answers; A parks B; B hangs up while A is getting the parking
slot announcement, immediately after being put on hold.
2. A calls B; B answers; A parks B; B hangs up after A has been hung up, but
before the park times out.
3. A calls B; B answers; B parks A; A hangs up while B is getting the parking slot announcement, immediately after being put on hold.
4. A calls B; B answers; B parks A; A hangs up after B has been hung up, but before the park times out.
No crash.
I also ran the scenarios above against valgrind, and accesses looked good.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@152536 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r152368 | tilghman | 2008-10-28 12:04:56 -0500 (Tue, 28 Oct 2008) | 8 lines
Reset all DIAL variables back to blank, in case Dial is called multiple times
per call (which could otherwise lead to inconsistent status reports).
(closes issue #13216)
Reported by: ruddy
Patches:
20081014__bug13216.diff.txt uploaded by Corydon76 (license 14)
Tested by: ruddy
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@152369 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
to mean that no timeout is desired.
(closes issue #13625)
Reported by: atis
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@149279 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
so we don't have to hardcode anything.
(closes issue #13636)
Reported by: seanbright
Patches:
13636.diff uploaded by seanbright (license 71)
Reviewed by: russellb, putnopvut
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@147388 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
our DAHDI operator mode stuff. Technically, it would work fine, as 'DAH'
is currently unique amongst our channel technologies, but as Jared points
out:
<@jsmith> Sure... as long as the technology starts whith DAH.... but
it could be DAHDOO!
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@147050 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
(closes issue #13354)
Reported by: adomjan
Patches:
20080828__bug13354.diff.txt uploaded by Corydon76 (license 14)
20080829__bug13354__1.6.0.diff.txt uploaded by Corydon76 (license 14)
Tested by: Corydon76, adomjan
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@143031 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r142675 | murf | 2008-09-11 22:29:34 -0600 (Thu, 11 Sep 2008) | 29 lines
Tested by: sergee, murf, chris-mac, andrew, KNK
This is a "second attempt" to restore the previous "endbeforeh" behavior
in 1.4 and up. In order to capture information concerning all the
legs of transfers in all their infinite combinations, I was forced
to this particular solution by a chain of logical necessities, the
first being that I was not allowed to rewrite the CDR mechanism from
the ground up!
This change basically leaves the original machinery alone, which allows
IVR and local channel type situations to generate CDR's as normal, but
a channel flag can be set to suppress the normal running of the h exten.
That flag would be set by the code that runs the h exten from the
ast_bridge_call routine, to prevent the h exten from being run twice.
Also, a flag in the ast_bridge_config struct passed into ast_bridge_call
can be used to suppress the running of the h exten in that routine. This
would happen, for instance, if you use the 'g' option in the Dial app.
Running this routine 'early' allows not only the CDR() func to be used
in the h extension for reading CDR variables, but also allows them to
be modified before the CDR is posted to the backends.
While I dearly hope that this patch overcomes all problems, and
introduces no new problems, reality suggests that surely someone
will have problems. In this case, please re-open 13251 (or 13289),
and we'll see if we can't fix any remaining issues.
** trunk note: some code to suppress the h exten being run
from app_queue was added; for the 'continue' option available
only in trunk/1.6.x.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@142676 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r139347 | murf | 2008-08-21 17:03:50 -0600 (Thu, 21 Aug 2008) | 47 lines
(closes issue #13251)
Reported by: sergee
Tested by: murf
THis is a bold move for a static release fix, but I wouldn't have
made it if I didn't feel confident (at least a *bit* confident)
that it wouldn't mess everyone up.
The reasoning goes something like this:
1. We simply cannot do anything with CDR's at the current point
(in pbx.c, after the __ast_pbx_run loop). It's way too late to
have any affect on the CDRs. The CDR is already posted and gone,
and the remnants have been cleared.
2. I was very much afraid that moving the running of the 'h'
extension down into the bridge code (where it would be now
practical to do it), would result in a lot more calls to the
'h' exten, so I implemented it as another exten under another
name, but found, to my pleasant surprise, that there was a
1:1 correspondence to the running of the 'h' exten in the
pbx_run loop, and the new spot at the end of the bridge.
So, I ifdef'd out the current 'h' loop, and moved it into
the bridge code. The only difference I can see is the stuff
about the AST_PBX_KEEPALIVE, and hopefully, if this
is still an important decision point, I can replicate it
if there are complaints. To be perfectly honest,
the KEEPALIVE situation is not totally clear to me,
and how it relates to a post-bridge situation is less
clear. I suspect the users will point out everything
in total clarity if this steps on anyone's toes!
3. I temporarily swap the bridge_cdr into the channel
before running the 'h' exten, which makes it possible
for users to edit the cdr before it goes out the door.
And, of course, with the endbeforehexten config var set,
the users can also get at the billsec/duration vals.
After the h exten finishes, the cdr is swapped back
and processing continues as normal.
Please, all who deal with CDR's, please test this version
of Asterisk, and file bug reports as appropriate!
........
I also made a little fix to the app_dial's 'e' option,
that is related to my updates.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@139627 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
app_voicemail and app_queue.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@137055 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r135799 | murf | 2008-08-05 17:13:20 -0600 (Tue, 05 Aug 2008) | 34 lines
(closes issue #12982)
Reported by: bcnit
Tested by: murf
I discovered that also, in the previous bug fixes and changes,
the cdr.conf 'unanswered' option is not being obeyed, so
I fixed this.
And, yes, there are two 'answer' times involved in this
scenario, and I would agree with you, that the first
answer time is the time that should appear in the CDR.
(the second 'answer' time is the time that the bridge
was begun).
I made the necessary adjustments, recording the first
answer time into the peer cdr, and then using that to
override the bridge cdr's value.
To get the 'unanswered' CDRs to appear, I purposely
output them, using the dial cmd to mark them as
DIALED (with a new flag), and outputting them if
they bear that flag, and you are in the right mode.
I also corrected one small mention of the Zap device
to equally consider the dahdi device.
I heavily tested 10-sec-wait macros in dial, and
without the macro call; I tested hangups while the
macro was running vs. letting the macro complete
and the bridge form. Looks OK. Removed all the
instrumentation and debug.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@135821 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
channel related, and add the ability to add/find/remove datastores to manager sessions
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@135680 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r130792 | mmichelson | 2008-07-14 12:50:21 -0500 (Mon, 14 Jul 2008) | 8 lines
Add a check to the CAN_EARLY_BRIDGE macro in app_dial to
be sure there are no audiohooks present on the channels
involved. This fixed a one-way audio situation I had in
my test setup. I couldn't find any open issues that suggested
one-way audio with regards to mixmonitor (or other audiohook)
usage, though.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@130794 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r129149 | tilghman | 2008-07-08 15:27:47 -0500 (Tue, 08 Jul 2008) | 8 lines
Cause SIP to return a 480 instead of a 404 when a sip peer exists, but is not
registered.
(closes issue #12885)
Reported by: ibc
Patches:
20080701__bug12885__2.diff.txt uploaded by Corydon76 (license 14)
Tested by: ibc
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@129152 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
'dialcontext' is only going to be set once during the channel's lifetime, so make it a string field instead of a char array
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@126960 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
to how language is handled between two channels whose native
language is different. Prior to this patch, app_dial would have
the callee inherit the caller's language, and app_queue would not.
After this patch, app_dial no longer has the language inheritance
capability. This seems to make the most sense since it seems more
natural for a person to hear files played back in his/her native
language instead of the language of the person on the far end of
the call. See the CHANGES file for hints on how to keep the
previous behavior of app_dial if desired.
(closes issue #12489)
Reported by: bcnit
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@125647 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
(closes issue #12840)
Reported by: pputman
Patches:
app_dial_threadsafe3.patch uploaded by pputman (license 81)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@123648 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Reported by: ys
Many thanks to ys for doing the research on this problem.
I didn't think it would be best to unlock the contexts
and then relock them after the remove_extension2() call,
so I added an extra arg to remove_extension2() and set it
appropriately in each call. There were not that many.
I considered forcing the code to lock the contexts before
the call to remove_extension2(), but that would require
a slightly greater degree of changes, especially since
the find_context_locked is local to pbx.c
I did a simple sanity test to make sure the code doesn't
mess things up in general.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@123165 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Configuration file and dialplan backwards compatability has been put in place where appropiate. Release announcement to follow.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@122234 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r119530 | russell | 2008-06-01 20:03:22 -0500 (Sun, 01 Jun 2008) | 2 lines
Fix another typo in documentation
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@119531 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r119478 | mvanbaak | 2008-06-01 22:47:55 +0200 (Sun, 01 Jun 2008) | 2 lines
small typo fix 'retires' => 'retries'
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@119479 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
properly.
(closes issue #12760)
Reported by: Corydon76
Patches:
20080530__bug12760.diff.txt uploaded by Corydon76 (license 14)
Tested by: tim_ringenbach, Corydon76
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@119296 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
- make data member of the ast_frame struct a named union instead of a void
Recently the ast_queue_hangup function got a new parameter, the hangupcause
Feedback came in that this is no good and that instead a new function should be created.
This I did.
The hangupcause was stored in the seqno member of the ast_frame struct. This is not very
elegant, and since there's already a data member that one should be used.
Problem is, this member was a void *.
Now it's a named union so it can hold a pointer, an uint32 and there's a padding in case someone
wants to store another type in there in the future.
This commit is so massive, because all ast_frame.data uses have to be
altered to ast_frame.data.data
Thanks russellb and kpfleming for the feedback.
(closes issue #12674)
Reported by: mvanbaak
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@117802 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
(closes issue #10540)
Reported by: spendergrass
Patches:
20080417__bug10540.diff.txt uploaded by Corydon76 (license 14)
Tested by: blitzrage
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@115076 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
(closes issue #12351)
Reported by: Corydon76
Patches:
20080402__pbx_incomplete__3.diff.txt uploaded by Corydon76 (license 14)
pbx_incomplete_with_timeout.diff uploaded by fabled (license 448)
Tested by: Corydon76, fabled
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@114773 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@114667 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
(closes issue #11328)
Reported by: rain
Patches:
20071207__pass_cause_in_hangup_control_frame.diff.txt uploaded by Corydon76 (license 14)
brought up-to-date to trunk by me
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@114637 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r114112 | mmichelson | 2008-04-14 11:24:22 -0500 (Mon, 14 Apr 2008) | 9 lines
If the datastore has been moved to another channel due to a masquerade, then
freeing the datastore here causes an eventual double free when the new channel
hangs up. We should only free the datastore if we were able to successfully remove
it from the channel we are referencing (i.e. the datastore was not moved).
(closes issue #12359)
Reported by: pguido
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@114113 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
(closes issue #11954)
Reported by: johan
Patches:
app_dial_rev104031.patch uploaded by johan (license 334)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@113649 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
of one of
those XXX comments from the code.
The redundancy occurs because the 'single' flag implies that the 'r' and 'm' flags are
not set, so there's no need to explicitly check them again.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@107530 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
