Age | Commit message (Collapse) | Author |
|
Added a new manager command to mute/unmute MixMonitor audio on a channel.
Added a new feature to audiohooks so that you can mute either read / write
(or both) types of frames - this allows for MixMonitor to mute either side
of the conversation without affecting the conversation itself.
(closes issue #16740)
Reported by: jmls
Review: https://reviewboard.asterisk.org/r/487/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@258190 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r257686 | dhubbard | 2010-04-16 16:15:43 -0500 (Fri, 16 Apr 2010) | 21 lines
Make the mixmonitor thread process audio frames faster
Mantis issue 17078 reports MixMonitor recordings have shorter durations than
the call duration. This was because the mixmonitor thread was not processing
frames from the audiohook fast enough. The mixmonitor thread would slowly fall
behind the most recent audio frame and when the channel hangs up, the mixmonitor
thread would exit without processing the same number of frames as the channel;
leaving the mixmonitor recording shorter than actual call duration.
This revision fixes this issue by moving the ast_audiohook_trigger_wait() and
the subsequent audiohook.status check into the block where the
ast_audiohook_read_frame() function returns NULL.
(closes issue #17078)
Reported by: geoff2010
Patches:
dw-M17078.patch uploaded by dhubbard (license 733)
Tested by: dhubbard, geoff2010
Review: https://reviewboard.asterisk.org/r/611/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@257713 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
(closes issue #16534)
Reported by: jlaguilar
Fix as suggested by jlaguilar in the bugreport
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@237656 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r230508 | dvossel | 2009-11-19 15:22:46 -0600 (Thu, 19 Nov 2009) | 10 lines
fixes MixMonitor thread not exiting when StopMixMonitor is used
(closes issue #16152)
Reported by: AlexMS
Patches:
stopmixmonitor_1.4.diff uploaded by dvossel (license 671)
Tested by: dvossel, AlexMS
Review: https://reviewboard.asterisk.org/r/424/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@230509 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r213103 | dvossel | 2009-08-19 16:18:37 -0500 (Wed, 19 Aug 2009) | 8 lines
Fixes memory leak caused by incorrectly freeing mixmonitor
(closes issue #15699)
Reported by: edantie
Patches:
mixmonitor.patch uploaded by edantie (license 862)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@213113 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@211539 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r201423 | dvossel | 2009-06-17 14:28:12 -0500 (Wed, 17 Jun 2009) | 19 lines
StopMixMonitor race condition (not giving up file immediately)
StopMixMonitor only indicates to the MixMonitor thread to stop
writing to the file. It does not guarantee that the recording's
file handle is available to the dialplan immediately after execution.
This results in a race condition. To resolve this, the filestream
pointer is placed in a datastore on the channel. When StopMixMonitor
is called, the datastore is retrieved from the channel and the
filestream is closed immediately before returning to the dialplan.
Documentation indicating the use of StopMixMonitor to free files
has been updated as well.
(closes issue #15259)
Reported by: travisghansen
Tested by: dvossel
Review: https://reviewboard.asterisk.org/r/283/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@201445 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r200991 | kpfleming | 2009-06-16 12:05:38 -0500 (Tue, 16 Jun 2009) | 11 lines
Improve support for media paths that can generate multiple frames at once.
There are various media paths in Asterisk (codec translators and UDPTL, primarily)
that can generate more than one frame to be generated when the application calling
them expects only a single frame. This patch addresses a number of those cases,
at least the primary ones to solve the known problems. In addition it removes the
broken TRACE_FRAMES support, fixes a number of bugs in various frame-related API
functions, and cleans up various code paths affected by these changes.
https://reviewboard.asterisk.org/r/175/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@201056 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Fix up modules in the 'apps' directory, and also correct the bad example of
enum definitions in include/asterisk/app.h, which many developers followed
(thanks for reading the documentation!). In addition, add some basic usage
examples of the 'pahole' and 'pglobal' tools to the coding guidelines.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@200656 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Updated the MixMonitor documentation for the 'b' option so that
it is more obvious that you must not optimize away the Local
channel when using this option.
(closes issue #14829)
Reported by: licedey
Tested by: mmichelson, licedey, lmadsen
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@197828 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This patch adds 'const' tags to a number of Asterisk APIs where they are appropriate (where the API already demanded that the function argument not be modified, but the compiler was not informed of that fact). The list includes:
- CLI command handlers
- CLI command handler arguments
- AGI command handlers
- AGI command handler arguments
- Dialplan application handler arguments
- Speech engine API function arguments
In addition, various file-scope and function-scope constant arrays got 'const' and/or 'static' qualifiers where they were missing.
Review: https://reviewboard.asterisk.org/r/251/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@196072 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@193832 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
There is a lot that could be said about this, but the patch is a big
improvement for performance, stability, code maintainability,
and ease of future code development.
The channel list is no longer an unsorted linked list. The main container
for channels is an astobj2 hash table. All of the code related to searching
for channels or iterating active channels has been rewritten. Let n be
the number of active channels. Iterating the channel list has gone from
O(n^2) to O(n). Searching for a channel by name went from O(n) to O(1).
Searching for a channel by extension is still O(n), but uses a new method
for doing so, which is more efficient.
The ast_channel object is now a reference counted object. The benefits
here are plentiful. Some benefits directly related to issues in the
previous code include:
1) When threads other than the channel thread owning a channel wanted
access to a channel, it had to hold the lock on it to ensure that it didn't
go away. This is no longer a requirement. Holding a reference is
sufficient.
2) There are places that now require less dealing with channel locks.
3) There are places where channel locks are held for much shorter periods
of time.
4) There are places where dealing with more than one channel at a time becomes
_MUCH_ easier. ChanSpy is a great example of this. Writing code in the
future that deals with multiple channels will be much easier.
Some additional information regarding channel locking and reference count
handling can be found in channel.h, where a new section has been added that
discusses some of the rules associated with it.
Mark Michelson also assisted with the development of this patch. He did the
conversion of ChanSpy and introduced a new API, ast_autochan, which makes it
much easier to deal with holding on to a channel pointer for an extended period
of time and having it get automatically updated if the channel gets masqueraded.
Mark was also a huge help in the code review process.
Thanks to David Vossel for his assistance with this branch, as well. David
did the conversion of the DAHDIScan application by making it become a wrapper
for ChanSpy internally.
The changes come from the svn/asterisk/team/russell/ast_channel_ao2 branch.
Review: http://reviewboard.digium.com/r/203/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@190423 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r173592 | mmichelson | 2009-02-05 12:47:24 -0600 (Thu, 05 Feb 2009) | 3 lines
Add some missing cleanup to app_mixmonitor
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@173593 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r173559 | mmichelson | 2009-02-05 11:34:33 -0600 (Thu, 05 Feb 2009) | 25 lines
Fix a problem where a channel pointer becomes invalid due to masquerading or hanging up.
app_mixmonitor runs its own thread to monitor the channel's activity and write the mixed
audio to a file. Since this thread runs independently of the channel, it is possible that
the mixmonitor thread's channel pointer will point to freed memory when the channel either
is masqueraded or hangs up (technically, both cases are hangups, but we need to handle the
cases slightly differently).
The solution for this is to employ a datastore, which has the nice benefit of allowing us
to hook into channel masquerades and hangups and update our pointer as necessary. If this
looks familiar, this same technique is employed in app_chanspy. app_chanspy is a bit more
involved since it does a lot more operations on the channel that is being spied upon.
app_mixmonitor does have an extra touch that app_chanspy doesn't have, though. Since there
is a thread race between the channel's thread and the mixmonitor thread on a hangup, we em-
ploy a condition-and-boolean combination to ensure that the channel thread finishes with
our structure before the mixmonitor thread attempts to free it. No crashes!
(closes issue #14374)
Reported by: aragon
Patches:
14374.patch uploaded by putnopvut (license 60)
Tested by: aragon, putnopvut
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@173589 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
(closes issue #13990)
Reported by: eliel
Patches:
array_len.diff uploaded by eliel (license 64)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@161218 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@154798 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This commit introduces the first phase of an effort to manage documentation of the
interfaces in Asterisk in an XML format. Currently, a new format is available for
applications and dialplan functions. A good number of conversions to the new format
are also included.
For more information, see the following message to asterisk-dev:
http://lists.digium.com/pipermail/asterisk-dev/2008-October/034968.html
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@153365 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
administrator to make the decision of what permissions will actually be given,
through the use of the process umask.
(Closes issue# 13751)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@151371 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This work is done by lmadsen, junky and mvanbaak
during AstriDevCon.
This is the second audit the CLI got, and
this time lmadsen made sure he had _ALL_ modules
loaded that have CLI commands in them.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@145121 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r108083 | file | 2008-03-12 15:26:37 -0300 (Wed, 12 Mar 2008) | 4 lines
Add a trigger mode that triggers on both read and write. The actual function that returns the combined audio frame though will wait until both sides have fed in audio, or until one side stops (such as the case when you call Wait).
(closes issue #11945)
Reported by: xheliox
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@108084 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Reported by: snuffy
Patch by: snuffy
(Closes issue #11547)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@92913 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
formatting fixes.
Reported by: eliel
Patch by: eliel,tilghman
(Closes issue #11209)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@92594 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r89587 | file | 2007-11-26 13:20:58 -0400 (Mon, 26 Nov 2007) | 6 lines
Close the audio file before sending it to the post processing application.
(closes issue #11357)
Reported by: reformed
Patches:
mixmonitor.patch uploaded by reformed (license 330)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89589 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
In this commit:
- move the ast_register/unregister_app functions to module.h
to avoid the need to include pbx.h for the simpler apps;
- move the ast_group structure to channel.h to remove the
dependency of app.h on linkedlists.h
Note, this is a long process that I am doing in small steps.
The main difficulty is that now for each subsystem we
have a single header (e.g. channel.h) included by the subsystem
provider (usually one file, e.g. channel.c) and by its clients
(dozens of them, e.g. we have some 70+ apps and 30+ functions).
This requires the clients to include all the extra headers
required by the provider (eg. lock.h, linkedlists.h, definitions
of substructures...) even though many of the clients would be
just happy with opaque struct declarations and function prototypes.
The long term plan is to eventually rectify this structure
so that the compilation can become faster, and also APIs
are more stable.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89522 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89519 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89512 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
who really need it.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89466 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
were included almost everywhere.
Remove some of the instances.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89424 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
build times - tested, there is no measureable difference before and
after this commit.
In this change:
use asterisk/compat.h to include a small set of system headers:
inttypes.h, unistd.h, stddef.h, stddint.h, sys/types.h, stdarg.h,
stdlib.h, alloca.h, stdio.h
Where available, the inclusion is conditional on HAVE_FOO_H as determined
by autoconf.
Normally, source files should not include any of the above system headers,
and instead use either "asterisk.h" or "asterisk/compat.h" which does it
better.
For the time being I have left alone second-level directories
(main/db1-ast, etc.).
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89333 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r89241 | mmichelson | 2007-11-13 10:02:02 -0600 (Tue, 13 Nov 2007) | 5 lines
Reverting commit made in revision 89205 since it is unnecessary.
Thanks to Kevin for pointing this out
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89242 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
mixmonitor->post_process
string. This fix prevents that.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89207 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r89205 | mmichelson | 2007-11-12 18:56:46 -0600 (Mon, 12 Nov 2007) | 5 lines
Some sanity checking for MixMonitor. If only 1 argument is given, then the args.options
and args.post_process strings are uninitialized and could contain garbage. This change
handles this situation properly by only using arguments that we have parsed.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89206 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
agressive in not initializing arrays passed to pbx_substitute_variables_xxxx; I reviewed the code (again) and hopefully found every possible spot where substitute_variables is called conditionally, and made sure the char array involved was set to a null string.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89186 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
(closes issue #11171, reported and patched by blitzrage)
Many thanks!
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89044 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
in the pbx, a 25-30% speed boost. The two updates used, are, first, to merge the ast_exists_extension() and the ast_spawn_extension() where they are called sequentially in a loop in the code, into a slightly upgraded version of ast_spawn_extension(), with a few extra args; and, second, I modified the substitute_variables_helper_full, so it zeroes out the byte after the evaluated string instead of demanding you pre-zero the buffer; I also went thru the code and removed the code that zeroed this buffer before every call to the substitute_variables_helper_full. The first fix provides about a 9% speedup, and the second the rest. These figures come from the 'PIPS' benchmark I describe in blogs, conf. reports, etc.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@88166 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@87851 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@87850 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
didn't make much sense
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@86820 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Closes issue #11039, as suggested by seanbright.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@86536 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
(closes issue #10724)
Reported by: eliel
Patches:
chan_skinny.c.patch uploaded by eliel (license 64)
chan_oss.c.patch uploaded by eliel (license 64)
chan_mgcp.c.patch2 uploaded by eliel (license 64)
pbx_config.c.patch uploaded by seanbright (license 71)
iax2-provision.c.patch uploaded by eliel (license 64)
chan_gtalk.c.patch uploaded by eliel (license 64)
pbx_ael.c.patch uploaded by seanbright (license 71)
file.c.patch uploaded by seanbright (license 71)
image.c.patch uploaded by seanbright (license 71)
cli.c.patch uploaded by moy (license 222)
astobj2.c.patch uploaded by moy (license 222)
asterisk.c.patch uploaded by moy (license 222)
res_limit.c.patch uploaded by seanbright (license 71)
res_convert.c.patch uploaded by seanbright (license 71)
res_crypto.c.patch uploaded by seanbright (license 71)
app_osplookup.c.patch uploaded by seanbright (license 71)
app_rpt.c.patch uploaded by seanbright (license 71)
app_mixmonitor.c.patch uploaded by seanbright (license 71)
channel.c.patch uploaded by seanbright (license 71)
translate.c.patch uploaded by seanbright (license 71)
udptl.c.patch uploaded by seanbright (license 71)
threadstorage.c.patch uploaded by seanbright (license 71)
db.c.patch uploaded by seanbright (license 71)
cdr.c.patch uploaded by moy (license 222)
pbd_dundi.c.patch uploaded by moy (license 222)
app_osplookup-rev83558.patch uploaded by moy (license 222)
res_clioriginate.c.patch uploaded by moy (license 222)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@85460 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
listen and manipulate the audio going through a channel.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@78649 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
few other formatting cleanups, too.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@77808 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
universal mod to make ast_flags a 64 bit thing. Instead, I added a 64-bit version of ast_flags (ast_flags64), and 64-bit versions of the test-flag, set-flag, etc. macros, and an app_parse_options64 routine, and I use these in app_dial alone, to eliminate the 30-option limit it had grown to meet. There is room now for 32 more options and flags. I was heavily tempted to implement some of the other ideas that were presented, but this solution does not intro any new versions of dial, doesn't have a different API, has a minimal/zero impact on code outside of dial, and doesn't seriously (I hope) affect the code structure of dial. It's the best I can think of right now. My goal was NOT to rewrite dial. I leave that to a future, coordinated effort.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@75983 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
run on peer. Had to upgrade ast_flag stuff to 64 bits to do this.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@75400 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
ast_module_user_remove. This is now taken care of in the pbx_exec function outside of the application.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@75200 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
ast_module_user_hangup_all in it's unload function. The loader will automatically perform this action for it.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@75183 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
................
r72381 | file | 2007-06-27 19:25:12 -0400 (Wed, 27 Jun 2007) | 10 lines
Merged revisions 72378 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.2
........
r72378 | file | 2007-06-27 19:24:01 -0400 (Wed, 27 Jun 2007) | 2 lines
Update documentation to clarify variable usage with MixMonitor. (issue #9494 reported by netoguy)
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@72382 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@71268 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
guidelines changes
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@67864 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|