| Age | Commit message (Collapse) | Author |
|---|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@157940 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
'queue remove member'
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@157939 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
hashing used by app_queue.c to be case-insensitive.
This is accomplished by adding a new case-insensitive
hashing function.
This was necessary to prevent bad refcount errors
(and potential crashes) which would occur due to the
fact that queues were initially read from the config
file in a case-sensitive manner. Then, when a user
issued a CLI command or manager action, we allowed
for case-insensitive input and used that input to
directly try to find the queue in the hash table. The result
was either that we could not find a queue that was input or
worse, we would end up hashing to a completely bogus value
based on the input.
This commit resolves the problem presented in
issue #13703. However, that issue was reported against
1.6.0. Since this fix introduces a behavior change, I am
electing to not place this same fix in to the 1.6.0 or 1.6.1
branches, and instead will opt for a change which does not
change behavior.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@156883 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r155553 | seanbright | 2008-11-08 20:08:07 -0500 (Sat, 08 Nov 2008) | 6 lines
Use static functions here instead of nested ones. This requires a small
change to the ast_bridge_config struct as well. To understand the reason
for this change, see the following post:
http://gcc.gnu.org/ml/gcc-help/2008-11/msg00049.html
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@155554 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
ao2_callback and ao2_find). Currently, passing OBJ_POINTER to either
of these mandates that the passed 'arg' is a hashable object, making
searching for an ao2 object based on outside criteria difficult.
Reviewed by Russell and Mark M. via ReviewBoard:
http://reviewboard.digium.com/r/36/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@155401 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@154542 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
and config_text_file_save to have an ast_ prefix
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@154260 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
branch, and add the ones needed for all the new code here too
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@153616 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This commit introduces the first phase of an effort to manage documentation of the
interfaces in Asterisk in an XML format. Currently, a new format is available for
applications and dialplan functions. A good number of conversions to the new format
are also included.
For more information, see the following message to asterisk-dev:
http://lists.digium.com/pipermail/asterisk-dev/2008-October/034968.html
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@153365 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
variables that were set after ast_bridge_call was called would not show up in the 'h' exten. Added a callback function to handle setting variables, etc. from w/in the bridging code. Calls back into a nested function within the function calling ast_bridge_call
(closes issue #13793)
Reported by: greenfieldtech
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@153181 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r152538 | murf | 2008-10-28 23:19:04 -0600 (Tue, 28 Oct 2008) | 14 lines
A little documentation cross-ref between features and
dial and queue... I wasted some time (stupidly) trying
to get the one-touch parking stuff working, because it
didn't occur to me that I had to also have the corresponding
options in the dial command! Duh! (In all this time, I never
set this up before!)
So, to keep some poor fool from suffering the same fate,
I made the features.conf.sample file mention the corresponding
opts in dial/queue; and the docs for dial/app specifically
mention the corresponding decls in the feature.conf file.
I hope this doesn't spoil some vast, eternal plan...
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@152605 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r152535 | murf | 2008-10-28 22:36:32 -0600 (Tue, 28 Oct 2008) | 46 lines
The magic trick to avoid this crash is not to
try to find the channel by name in the list,
which is slow and resource consuming, but rather
to pay attention to the result codes from the
ast_bridge_call, to which I added the
AST_PBX_NO_HANGUP_PEER_PARKED value, which
now are returned when a channel is parked.
Why? because CDR's aren't generated via parking,
so nothing is needed, but if a transfer occurred,
there are critical things I need.
If you get AST_PBX_KEEPALIVE,
then don't touch the channel pointer.
If you get AST_PBX_NO_HANGUP_PEER, or
AST_PBX_NO_HANGUP_PEER_PARKED, then don't
touch the peer pointer.
Updated the several places where the results
from a bridge were not being properly obeyed,
and fixed some code I had introduced so that
the results of the bridge were not overridden
(in trunk).
All the places that previously tested for
AST_PBX_NO_HANGUP_PEER now have to check for
both AST_PBX_NO_HANGUP_PEER and AST_PBX_NO_HANGUP_PEER_PARKED.
I tested this against the 4 common parking
scenarios:
1. A calls B; B answers; A parks B; B hangs up while A is getting the parking
slot announcement, immediately after being put on hold.
2. A calls B; B answers; A parks B; B hangs up after A has been hung up, but
before the park times out.
3. A calls B; B answers; B parks A; A hangs up while B is getting the parking slot announcement, immediately after being put on hold.
4. A calls B; B answers; B parks A; A hangs up after B has been hung up, but before the park times out.
No crash.
I also ran the scenarios above against valgrind, and accesses looked good.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@152536 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
(closes issue #13731)
reported and patched by: caio1982
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@150773 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r149200 | mmichelson | 2008-10-14 17:40:42 -0500 (Tue, 14 Oct 2008) | 12 lines
Update the queue with the correct number of calls and
whether the call was completed within the service level
when a transfer takes place. This way, we do not "break"
the leastrecent and fewestcalls strategies by not logging
a call until after the transferred call has ended.
(closes issue #13395)
Reported by: Marquis
Patches:
app_queue.c.transfer.patch uploaded by Marquis (license 32)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@149201 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
and "leavewhenempty" options are configured in queues.conf.
Instead of using vague terms like "yes," "no," "loose," and
"strict," we now accept a comma-separated list of values
to determine when to consider a member available.
Extended details can be found in the queues.conf.sample
file. Note also that the above four referenced values are
still accepted for backwards-compatibility, but are mapped
internally to the new method of representing the option.
AST-105
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@146640 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This work is done by lmadsen, junky and mvanbaak
during AstriDevCon.
This is the second audit the CLI got, and
this time lmadsen made sure he had _ALL_ modules
loaded that have CLI commands in them.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@145121 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@144879 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
when a file is invalid from when a file is missing. This is most important when
we have two configuration files. Consider the following example:
Old system:
sip.conf users.conf Old result New result
======== ========== ========== ==========
Missing Missing SIP doesn't load SIP doesn't load
Missing OK SIP doesn't load SIP doesn't load
Missing Invalid SIP doesn't load SIP doesn't load
OK Missing SIP loads SIP loads
OK OK SIP loads SIP loads
OK Invalid SIP loads incompletely SIP doesn't load
Invalid Missing SIP doesn't load SIP doesn't load
Invalid OK SIP doesn't load SIP doesn't load
Invalid Invalid SIP doesn't load SIP doesn't load
So in the case when users.conf doesn't load because there's a typo that
disrupts the syntax, we may only partially load users, instead of failing with
an error, which may cause some calls not to get processed. Worse yet, the old
system would do this with no indication that anything was even wrong.
(closes issue #10690)
Reported by: dtyoo
Patches:
20080716__bug10690.diff.txt uploaded by Corydon76 (license 14)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@142992 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r142675 | murf | 2008-09-11 22:29:34 -0600 (Thu, 11 Sep 2008) | 29 lines
Tested by: sergee, murf, chris-mac, andrew, KNK
This is a "second attempt" to restore the previous "endbeforeh" behavior
in 1.4 and up. In order to capture information concerning all the
legs of transfers in all their infinite combinations, I was forced
to this particular solution by a chain of logical necessities, the
first being that I was not allowed to rewrite the CDR mechanism from
the ground up!
This change basically leaves the original machinery alone, which allows
IVR and local channel type situations to generate CDR's as normal, but
a channel flag can be set to suppress the normal running of the h exten.
That flag would be set by the code that runs the h exten from the
ast_bridge_call routine, to prevent the h exten from being run twice.
Also, a flag in the ast_bridge_config struct passed into ast_bridge_call
can be used to suppress the running of the h exten in that routine. This
would happen, for instance, if you use the 'g' option in the Dial app.
Running this routine 'early' allows not only the CDR() func to be used
in the h extension for reading CDR variables, but also allows them to
be modified before the CDR is posted to the backends.
While I dearly hope that this patch overcomes all problems, and
introduces no new problems, reality suggests that surely someone
will have problems. In this case, please re-open 13251 (or 13289),
and we'll see if we can't fix any remaining issues.
** trunk note: some code to suppress the h exten being run
from app_queue was added; for the 'continue' option available
only in trunk/1.6.x.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@142676 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
issue 12979. The difference between this and the
1.6.0 and 1.6.1 versions is that this is a much more
invasive change. With this, we completely get rid
of the interfaces list, along with all its helper
functions.
Let me take a moment to say that this change personally
excites me since it may mean huge steps forward regarding
proper lock order in app_queue without having to strew
seemingly unnecessary locks all over the place. It also
results in a huge reduction in lines of code and complexity.
Way to go Brett!
(closes issue #12979)
Reported by: sigxcpu
Patches:
20080710_issue12979_queue_custom_state_interface_trunk_2.diff uploaded by bbryant (license 36)
Tested by: sigxcpu, putnopvut
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@142146 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
messages weren't showing up when I had set the debug level
high for just app_queue.c. It's because we were only checking
the global option_debug variable instead of using the awesome
macro which checks both the global and file-specific value
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@141998 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
status is if the queue has a joinempty or a leavewhenempty
setting which could cause the caller to not join the queue
or exit the queue. Prior to this patch, we could potentially
traverse the entire queue's member list for no reason since
even if the members are currently not available in some way
we're going to let the caller join the queue anyway.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@141906 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
brought up by atis on IRC a while ago.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@140975 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r140488 | mmichelson | 2008-08-29 12:34:17 -0500 (Fri, 29 Aug 2008) | 22 lines
After working on the ao2_containers branch, I noticed
something a bit strange. In all cases where we provide
a callback function to ao2_container_alloc, the callback
function would only return 0 or CMP_MATCH. After inspecting
the ao2_callback() code carefully, I found that if you're
only looking for one specific item, then you should return
CMP_MATCH | CMP_STOP. Otherwise, astobj2 will continue
traversing the current bucket until the end searching for
more matches.
In cases like chan_iax2 where in 1.4, all the peers are
shoved into a single bucket, this makes for potentially
terrible performance since the entire bucket will be
traversed even if the peer is one of the first ones come
across in the bucket.
All the changes I have made were for cases where the
callback function defined was passed to ao2_container_alloc
so that calls to ao2_find could find a unique instance
of whatever object was being stored in the container.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@140489 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
event if eventwhencalled is set to "vars" in
queues.conf. Yay for consistency.
(closes issue #13369)
Reported by: srt
Patches:
13369_agentringnoanswer_variables.diff uploaded by srt (license 378)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@139832 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
and confusing code pieces. Clarify the logic within
queues.conf.sample.
(closes issue #12690)
Reported by: atis
Patches:
queue_timeoutpriority.patch uploaded by atis (license 242)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@138694 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r138685 | mmichelson | 2008-08-18 15:01:14 -0500 (Mon, 18 Aug 2008) | 10 lines
Change the inequalities used in app_queue with regards
to timeouts from being strict to non-strict for more
accuracy.
(closes issue #13239)
Reported by: atis
Patches:
app_queue_timeouts_v2.patch uploaded by atis (license 242)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@138687 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
files from main/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@137089 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r136488 | tilghman | 2008-08-07 11:50:47 -0500 (Thu, 07 Aug 2008) | 7 lines
Update persistent state on all exit conditions.
(closes issue #12916)
Reported by: sgenyuk
Patches:
app_queue.patch.txt uploaded by neutrino88 (license 297)
Tested by: sgenyuk, aragon
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@136489 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
channel related, and add the ability to add/find/remove datastores to manager sessions
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@135680 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r134758 | mmichelson | 2008-07-31 10:56:18 -0500 (Thu, 31 Jul 2008) | 16 lines
Add more timeout checks into app_queue, specifically
targeting areas where an unknown and potentially
long time has just elapsed. Also added a check
to try_calling() to return early if the timeout
has elapsed instead of potentially setting a negative
timeout for the call (thus making it have *no* timeout
at all).
(closes issue #13186)
Reported by: miquel_cabrespina
Patches:
13186.diff uploaded by putnopvut (license 60)
Tested by: miquel_cabrespina
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@134759 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/trunk
........
r134556 | mmichelson | 2008-07-30 15:24:40 -0500 (Wed, 30 Jul 2008) | 7 lines
Fix the parsing of the "reason" parameter in the
Diversion: header.
(closes issue #13195)
Reported by: woodsfsg
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@134598 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
UPGRADE-1.4.txt)
(Closes issue #13181)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@134483 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Pointed out by Atis Lezdins in #asterisk-dev
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@133570 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r131369 | mmichelson | 2008-07-16 15:23:02 -0500 (Wed, 16 Jul 2008) | 14 lines
Move the init_queue call back to where it used to be (changed
Sept 12 last year). It was moved then to prevent a memory leak.
Since then, the same memory leak recurred and was fixed in a
better way.
Now it has been found that the placement of this init_queue
call can cause problems if a realtime queue has values changed
to an empty string. The problem is that the default value
for that queue parameter would not be set.
(closes issue #13084)
Reported by: elbriga
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@131375 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r131357 | mmichelson | 2008-07-16 14:37:08 -0500 (Wed, 16 Jul 2008) | 6 lines
Apparently, "thread safety" is important, whatever
that means. :P
(Thanks Russell!)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@131358 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r131299 | mmichelson | 2008-07-16 13:57:34 -0500 (Wed, 16 Jul 2008) | 13 lines
Make absolutely certain that the transfer datastore
is removed from the calling channel once the caller
is finished in the queue. This could have weird con-
sequences when dialing local queue members when multiple
transfers occur on a single call.
Also fixed a memory leak that would occur when an
attended transfer occurred from a queue member.
(closes issue #13047)
Reported by: festr
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@131300 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
a member of any queue.
(closes issue #13073)
Reported by: eliel
Patches:
app_queue.c.patch uploaded by eliel (license 64)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@131015 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
state_interface, if a state_interface was set, on reload because the
state_interface isn't stored in the ast_db.
(closes issue #13043)
Reported by: jvandal
Patches:
app_queue.patch uploaded by jvandal (license 413)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@129684 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
explanation of the change may be found in configs/queues.conf.sample
(closes issue #12690)
Reported by: atis
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@127720 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
'dialcontext' is only going to be set once during the channel's lifetime, so make it a string field instead of a char array
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@126960 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@125856 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Thanks to Russell for pointing out the problem
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@125855 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@125666 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
MixMonitor to mix audio. However, it was pointed out to me that because
of this, the command set for the MONITOR_EXEC variable is ignored as well.
This means that people can't do their own custom mixing commands at the end
of recordings in order to make, for instance, stereo recordings of calls.
With this patch, app_queue will set the "joinfiles" variable for the channel's
monitor if MONITOR_EXEC is not zero-length. This means that for normal audio
mixing, MixMonitor is still the preferred choice, but we allow custom
mixing to be done with the two Monitor streams if desired.
(closes issue #12923)
Reported by: snyfer
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@125649 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@125591 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r125585 | mmichelson | 2008-06-26 17:52:39 -0500 (Thu, 26 Jun 2008) | 11 lines
Add the interface of a queue member to the output of the "queue show" command
so that it can easily be associated with a queue member's name. This helps
so that the appropriate queue member can be removed or paused since the
interface is required, not the member's name.
(closes issue #12783)
Reported by: davevg
Patches:
app_queue.diff uploaded by davevg (license 209) with small mod from me
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@125586 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r125476 | mmichelson | 2008-06-26 15:56:01 -0500 (Thu, 26 Jun 2008) | 11 lines
Prior to this patch, the "queue show" command used cached
information for realtime queues instead of giving up-to-date
info. Now realtime is queried for the latest and greatest in
queue info.
(closes issue #12858)
Reported by: bcnit
Patches:
queue_show.patch uploaded by putnopvut (license 60)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@125477 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
They want (char *)NULL as sentinel.
An example is OpenBSD (confirmed on 4.3) that ships with gcc 3.3.4
This commit introduces a contstant SENTINEL which is declared as:
#define SENTINEL ((char *)NULL)
All places I could test compile on my openbsd system are converted.
Update CODING-GUIDELINES to tell about this constant.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@124127 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
(closes issue #12888)
Reported by: slavon
Patches:
app_queue_transfer_patch_trunk.diff uploaded by slavon (license 288)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@123828 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
