Age | Commit message (Collapse) | Author |
|
Fixes a bug on the "confbridge show profile bridge" cli command
that showed "video_mode=no video" when video_mode was set
to "sfu"
ASTERISK-27418 #close
Change-Id: I481e3172c7f872664c7ac7809879d541c9f031e9
|
|
This change adds the ability for multiple REMB reports in
bridge_softmix to be combined according to a configured
behavior into a single report. This single report is sent
back to the sender of video, which adjusts the encoding bitrate
to be at or below the bitrate of the report. The available
behaviors are: lowest, highest, and average. Lowest uses the
lowest received bitrate. Highest uses the highest received
bitrate. Average goes through the received bitrates adding
them to the previous average and creates a new average.
Other behaviors can be added in the future and the existing
average one may be adjusted, but this provides the foundation
to do so.
Support for configuring which behavior to use has been
added to app_confbridge.
ASTERISK-27804
Change-Id: I9eafe4e7c1f72d67074a8d6acb26bfcf19322b66
|
|
|
|
|
|
Change-Id: Ib427ffc2c802620eaafb08b1c2a17dddd8fb8eb6
|
|
This change adds a configuration option to app_confbridge which can be
used to set the interval at which we will send a combined REMB (remote
estimated maximum bitrate) frame to sources of video. The bridging API
has also been extended slightly to allow setting this so bridge_softmix
can use it.
ASTERISK-27786
Change-Id: I0e49eae60f369c86434414f3cb8278709c793c82
|
|
Add an option to make app_originate not wait for the created channel
to answer.
Change-Id: I7fc2facd77079abc6321f44e8bcd4e39298de2ae
Requested-by: Frederic Steinfels <fst@highdefinition.ch>
Signed-off-by: Russell Bryant <russell@russellbryant.net>
|
|
|
|
|
|
|
|
|
|
Asterisk does not need the development package of libltdl, because it does not
use any symbol of -lltdl directly. Instead, it uses the runtime package via the
shared library -lodbc. On the supported platforms, that shared library declares
its dependency on -lltdl correctly, otherwise AST_EXT_LIB_CHECK would have
failed.
ASTERISK-27745
Change-Id: Icd315809b8e7978203431f3afb66240dd3a040ba
|
|
Certain applications (e.g. door-phone) require that also video is transmitted
before a call is accepted.
Change-Id: I9842e1dc2f6e1c2c49dc33fe615255007d2f821e
|
|
When app_voicemail calls ast_test_suite_notify with the results of
a user keypress, it formats the keypress as '%c'. If the user hung up
or some other error occurrs, the result of the keypress is a non
printable character. This ultimately causes json_vpack_ex to think
it's being passed a non utf-8 string and return an error.
* Keypress results passed to ast_test_suite_notify are now checked with
isprint() and a '?' is substituted if the check fails.
Change-Id: I78ee188916bbac840f3d03f40201b692347ea865
|
|
* acl (named_acl.c)
* cdr
* cel
* ccss
* dnsmgr
* dsp
* enum
* extconfig (config.c)
* features
* http
* indications
* logger
* manager
* plc
* sounds
* udptl
These modules are now loaded at appropriate time by the module loader.
Unlike loadable modules these use AST_MODULE_LOAD_FAILURE on error so
the module loader will abort startup on failure of these modules.
Some of these modules are still initialized or shutdown from outside the
module loader. logger.c is initialized very early and shutdown very
late, manager.c is initialized by the module loader but is shutdown by
the Asterisk core (too much uses it without holding references).
Change-Id: I371a9a45064f20026c492623ea8062d02a1ab97f
|
|
|
|
|
|
|
|
|
|
The menuselect comment was updated to deprecate these modules but the
AST_MODULE_INFO block at the end of file was missed.
ASTERISK-27671
Change-Id: I63070b5c4d4f08af010c6034acd4793c1bcef839
|
|
Checking option_debug directly is incorrect as it ignores file/module
specific debug settings. This system-wide change replaces nearly all
direct checks for option_debug with the DEBUG_ATLEAST macro.
Change-Id: Ic342d4799a945dbc40ac085ac142681094a4ebf0
|
|
Fixed wrong voicemail mailbox reference for Action: VoicemailUsersList.
ASTERISK-27703
Change-Id: Ie6578ad80bba2bfaf34b84f0be978f59045ce6cd
|
|
astosp.h is leftover from when logic was split between app_osplookup and
res_osp. All logic was moved into app_osplookup by 109737eb1c in 2006,
but astosp.h remained. This moves the remaining defines into
app_osplookup and deletes astosp.h.
Change-Id: I0a6c4debd7c9543b608520b1765abfa4fab7b2fd
|
|
Between Asterisk 11 and Asterisk 13 there was a significant increase
in the number of AST_FRAME_NULL frames being processed by app_amd.c's
main loop. Each AST_FRAME_NULL frame was being counted as 100ms
towards the total time and silence. This may have been accurate
when app_amd.c was orginally added, but it is not in Asterisk 13.
As such the total analysis time and silence calculations were way
off effectively breaking app_amd.c
* Additional debug messages were added
* AST_FRAME_NULL are now ignored
ASTERISK-27610
Change-Id: I18aca01af98f87c1e168e6ae0d85c136d1df5ea9
|
|
* app_fax (replaced by res_fax).
* res_config_sqlite (replaced by res_config_sqlite3).
* res_monitor (replaced by app_mixmonitor).
This is related to ASTERISK~23657 but does not resolve that ticket.
Resolving that ticket would require complete removal of res_monitor.
ASTERISK-27671 #close
Change-Id: I16a3edd61fc1abd4a7b2e9357693ed663f62dd49
|
|
* Made the AMI ConfbridgeList action's ConfbridgeList events output all
the standard channel snapshot headers instead of a few hand-coded channel
snapshot headers. The benefit is that the CallerIDName gets disruptive
characters like CR, LF, Tab, and a few others escaped. However, an empty
CallerIDName is now output as "<unknown>" instead of "<no name>".
ASTERISK-27651
Change-Id: Iaf7d54a9d40194c2db060bc9b4979fab6720d977
|
|
ASTERISK-27651
Change-Id: Idef2ca54d242d1b894efd3fc7b360bc6fd5bdc34
|
|
dsp_talking_threshold docs."
|
|
|
|
The dsp_talking_threshold does not represent time in milliseconds. It
represents the average magnitude per sample in the audio packets. This is
what the DSP uses to determine if a packet is silence or talking/noise.
Change-Id: If6f939c100eb92a5ac6c21236559018eeaf58443
|
|
|
|
clang 4.0 warned about this.
ASTERISK-27635
Change-Id: I213f230607d7fbe97c0f5f2d60da9cbf5a2d8231
|
|
This removes references that are no longer needed due to automatic
references created by module dependencies.
In addition this removes most calls to ast_module_check as they were
checking modules which are listed as dependencies.
Change-Id: I332a6e8383d4c72c8e89d988a184ab8320c4872e
|
|
I've audited all modules that include any header which includes
asterisk/optional_api.h. All modules which use OPTIONAL_API now declare
those dependencies in AST_MODULE_INFO using requires or optional_modules
as appropriate.
In addition ARI dependency declarations have been reworked. Instead of
declaring additional required modules in res/ari/resource_*.c we now add
them to an optional array "requiresModules" in api-docs for each module.
This allows the AST_MODULE_INFO dependencies to include those missing
modules.
Change-Id: Ia0c70571f5566784f63605e78e1ceccb4f79c606
|
|
This patch adds the ability to configure a prompt which will be read
to the "winner" who pressed 1 (or the configured value) and received
the call.
ASTERISK-24372 #close
Change-Id: I6ec1c6c883347f7d1e1f597189544993c8d65272
|
|
* Declare 'requires' and 'enhances' text fields on module info structure.
* Rename 'nonoptreq' to 'optional_modules'.
* Update doxygen comments.
Still need to investigate dependencies among modules I cannot compile.
Change-Id: I3ad9547a0a6442409ff4e352a6d897bef2cc04bf
|
|
GCC 7 warned about this.
ASTERISK-27578
Change-Id: I4a00458dbe9b575ef04338b6a7852272745e1552
|
|
The check for last_user == NULL needs to happen before we dereference
the variable, previously it was possible for us to check flags of a NULL
last_user.
Change-Id: I274f737aa8af9d2d53e4a78cdd7ad57561003945
|
|
clang 5.0 warned about this.
ASTERISK-27557
Change-Id: I7cceaa88e147cbdf81a3a7beec5c1c20210fa41e
|
|
Change-Id: I873c1c6d00f447269bd841494459efccdd2c19c0
|
|
|
|
|
|
Fix error where input/output file descriptors would be closed multiple
times.
Change-Id: Iba5140b60cb7de79e3d5d92be3c256947aa99da9
|
|
Fix instances of:
* Retreive
* Recieve
* other then
* different then
* Repeated words ("the the", "an an", "and and", etc).
* othterwise, teh
ASTERISK-24198 #close
Change-Id: I3809a9c113b92fd9d0d9f9bac98e9c66dc8b2d31
|
|
Change-Id: If5efaddcf735ff7d17e55c36cc1388946cee9e0f
|
|
|
|
* mwi_sub_event_cb: mwist leaked on separate_mailbox failure.
* add_email_attachment: A reference to sox_gain_tmpdir was used
after the storage was out of scope.
Change-Id: I6282c542ff7b82fa091177a912d11234a8b00a30
|
|
This patch adds the ability to set the wrapuptime on the queue member
config.
When the option is set the wrapuptime on the queue member is used instead
of the queue's wrapuptime.
ASTERISK-27483 #close
Change-Id: I11c85809537f974eb44dc5bbf82bcedd8a458902
|
|
* changes:
aco: Minimize use of regex.
aco: Create ways to minimize use of regex.
|
|
The Local channel has never supported app_transfer
from what I can see so remove it from the documentation.
ASTERISK-25649
Change-Id: Icbcfe297f6f866285a26b3e9fd5c6d00fa22e0e9
|