| Age | Commit message (Collapse) | Author |
|---|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r197466 | file | 2009-05-28 10:44:58 -0300 (Thu, 28 May 2009) | 8 lines
Fix a bug where the flag indicating the presence of rport would get overwritten by the nat setting.
The presence of rport is now stored as a separate flag. Once the dialog is setup and authenticated
(or it passes through unauthenticated) the proper nat flag is set.
(closes issue #13823)
Reported by: dimas
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@197467 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Previously they always set hangupcause 0, which is generally wrong. With this
change, we're setting some generic hangup causes. For 5xx errors, which indicate
some sort of problem with the remote server, we're now setting CONGESTION.
EDVX002
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@197266 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@196893 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
the peer.
(closes issue #15118)
Reported by: alecdavis
Patches:
chan_sip_unregister.diff2.txt uploaded by alecdavis (license 585)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@196721 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
In sip.conf the transport option allows for the configuration of what transport types (udp, tcp, and tls) a peer will accept, but only the first type listed was used for outbound connections. This patch changes this. Now the default transport type is only used until the peer registers. When registration takes place the transport type is parsed out of the Contact header. If the Contact header's transport type is equal to one that the peer supports, the peer's default transport type for outbound connections is set to match the Contact header's type. If the Contact header's transport type is not present, then the peer's default transport type is set to match the one the peer registered with. When a peer unregisters or the registration expires, the default transport type for that peer is reset.
(closes issue #12282)
Reported by: rjain
Patches:
reg_patch_1.diff uploaded by dvossel (license 671)
Tested by: dvossel
(closes issue #14727)
Reported by: pj
Patches:
reg_patch_3.diff uploaded by dvossel (license 671)
Tested by: pj, dvossel
Review: https://reviewboard.asterisk.org/r/249/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@196416 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
A new xml element was created to manage the AMI actions documentation,
using AstXML.
To register a manager action using XML documentation it is now possible
using ast_manager_register_xml().
The CLI command 'manager show command' can be used to show the parsed
documentation.
Example manager xml documentation:
<manager name="ami action name" language="en_US">
<synopsis>
AMI action synopsis.
</synopsis>
<syntax>
<xi:include xpointer="xpointer(...)" /> <-- for ActionID
<parameter name="header1" required="true">
<para>Description</para>
</parameter>
...
</syntax>
<description>
<para>AMI action description</para>
</description>
<see-also>
...
</see-also>
</manager>
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@196308 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@196268 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This patch adds 'const' tags to a number of Asterisk APIs where they are appropriate (where the API already demanded that the function argument not be modified, but the compiler was not informed of that fact). The list includes:
- CLI command handlers
- CLI command handler arguments
- AGI command handlers
- AGI command handler arguments
- Dialplan application handler arguments
- Speech engine API function arguments
In addition, various file-scope and function-scope constant arrays got 'const' and/or 'static' qualifiers where they were missing.
Review: https://reviewboard.asterisk.org/r/251/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@196072 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
When receiving a 200 OK response to an INVITE, it was possible to transmit two
connected line updates instead of a single one. Furthermore, the second did not
have the proper information present.
Now the two have been combined into a single update and the correct information
is presented.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@195798 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
SIP purists may want to look the other way...
When COLP/CONP support for SIP was committed, there was a condition under
which Asterisk may transmit a SIP UPDATE in order to communicate the change
in connected line information. The issue here is that while we could send a
SIP UPDATE message, we were not prepared to receive such an UPDATE and would
always responde with a 501 when we received an UPDATE.
The situation was a bit rough. We really want to be able to receive UPDATEs
having to do with connected line changes, but the amount of effort involved
in properly supporting RFC 3311 was staggering. This commit represents a
compromise.
First, it was decided that it is important to only send a SIP UPDATE to
an endpoint that is able to handle one. So, now we have added parsing of
the Allow header into SIP. We store the allowed methods on SIP peers so
that when we communicate with them, we already will know what we can and
cannot send to them. We will parse the peer's allowed methods when he registers
with us. If the peer is not the type to register with us, but the qualify option
is enabled, then we will use the response to the OPTIONS request we send
the peer to determine the peer's allowed methods. When the peer's registration
expires, or when qualify deems the peer to be unreachable, we clear the allowed
methods from the peer.
For an actual call, we will copy the peer's allowed methods to the sip_pvt
representing the call leg. If we are communicating with an endpoint which is
not a peer, then we will just parse the Allow header from the first message
we receive during the call and store the information in the sip_pvt.
If, during communication with a peer, we receive a 501 response, then we will
make sure to save the fact that we cannot use that method when communicating
with that peer.
Now, with all that infrastructure in place, the only actual place we use this
information currently is when attempting to send a connected line change using
an UPDATE request. If we cannot send the change immediately using an UPDATE,
we will set the SIP_NEEDREINVITE flag so that we can send a REINVITE as soon
as it is allowed.
The second part of the changes here is for Asterisk to accept UPDATE requests
that have connected line changes. Since we are not fully supporting RFC 3311,
Asterisk will NOT place the UPDATE method in Allow headers it sends. Instead,
if you are communicating with what you know to be another Asterisk box, you may
set the rpid_update parameter in sip.conf so that we will send UPDATEs to that
Asterisk box. When we send a connected line update, we set a custom header
called "X-Asterisk-rpid-update."
On the receiving end, if Asterisk receives an UPDATE that does not have the
"X-Asterisk-rpid-update" header present, then Asterisk will respond with a 501
since media-changing UPDATEs are not supported. We should never get such
UPDATEs, since as was stated earlier, Asterisk does not put UPDATE in its Allow
header. If the custom header is present in the received UPDATE, though, then we
will check the incoming request for connected line updates and queue the update
on the channel where the change occurred.
ABE-1840
ABE-1822
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@195589 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r195448 | file | 2009-05-19 11:41:45 -0300 (Tue, 19 May 2009) | 7 lines
Fix a bug where direct RTP setup would partially occur even when disabled if the calling channel was answered.
(issue #13545)
Reported by: davidw
(issue #14244)
Reported by: mbnwa
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@195449 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
sent to ourself.
(closes issue #15106)
Reported by: timeshell
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@195089 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r194484 | mmichelson | 2009-05-14 17:17:55 -0500 (Thu, 14 May 2009) | 24 lines
Fix a race condition where a reinvite could trigger a 482 response.
The loop detection/spiral detection code in chan_sip used the owner
channel's state as a criterion for determining if the incoming INVITE
is a looped request. The problem with this is that the INVITE-handling
code happens in a different thread than the thread that marks the owner
channel as being up. As a result, if a reinvite were to come in very quickly,
say from another Asterisk on the same LAN, it was possible for the reinvite
to arrive before the owner channel had been set to the up state.
This patch corrects the problem by using the invitestate of the sip_pvt
instead, since that can be guaranteed to be set correctly by the time
the reinvite arrives. Since there is a switch statement further in the
INVITE-handling code, the AST_STATE_RINGING state also checks the invitestate
of the sip_pvt in case we should actually be treating the channel as if it were
up already.
(closes issue #12215)
Reported by: jpyle
Patches:
12215_confirmed.patch uploaded by mmichelson (license 60)
Tested by: lmadsen
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@194496 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
In 1.4, a SIP spiral is treated the same way as a call forward. This
works much better than what is currently in trunk and 1.6.X. The code
in trunk and 1.6.X did not create a new call to the recipient of the spiral,
instead trying to continue the same call. In addition to just being plain
wrong, this also had the side effect of only being able to spiral calls
to other SIP channels.
With this in place, as long as call forwards are honored, SIP spirals
will work properly. This means that it will work for outbound calls
made by the Queue, Dial, and Page applications. For originated calls and
spool calls, however, the spiral will not work properly until a generic
call forward mechanism is introduced into Asterisk.
(relates to issue #13630)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@193954 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
find_peer() does not find a valid peer when using pvt->recv as the sockaddr_in argument. Because of the way TCP works, the port number in pvt->recv is not what we're looking for at all. There is currently only one place that find_peer searches for a peer using the sockaddr_in argument. If the peer is not found after using pvt->recv (works for UDP since the port number will be correct), a temp sockaddr_in struct is made using the Contact header in the sip_request. This has the correct port number in it.
Review: http://reviewboard.digium.com/r/236/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@193387 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r192932 | tilghman | 2009-05-07 11:29:08 -0500 (Thu, 07 May 2009) | 10 lines
Eliminate repetition of fullcontact during reconstruction.
If the fullcontact field appears in both the sippeers and the
sipregs table, then during reconstruction of the field, it will
otherwise be doubled.
(closes issue #14754)
Reported by: Alexei Gradinari
Patches:
20090506__bug14754.diff.txt uploaded by tilghman (license 14)
Tested by: lmadsen
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@192933 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r192633 | file | 2009-05-06 10:30:51 -0300 (Wed, 06 May 2009) | 7 lines
Update some old logic to stop both begin and end DTMF frames from reaching the core if rfc2833 is not enabled.
(closes issue #15036)
Reported by: dimas
Patches:
v1-15036.patch uploaded by dimas (license 88)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@192634 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
The local struct ast_party_connected_line connected_caller variable
was uninitialized when the copy function was called.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@192590 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
If an incoming call authenticated as a user or peer and t38pt_udptl was
not set to yes in general then no UDPTL session would be present and any
T38 related things would fail. This commit changes it so that if after
authenticating T38 is enabled but no UDPTL session is present one will be
created.
(issue AST-215)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@192387 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r191559 | tilghman | 2009-05-01 15:00:23 -0500 (Fri, 01 May 2009) | 6 lines
SIP Response 410 maps to cause code 22 (or 23), not 1.
(closes issue #14993)
Reported by: BigJimmy
Patches:
causepatch uploaded by BigJimmy (license 371)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@191560 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
ast_tls_read_conf() is a new api call for handling SSL/TLS options across all conf files. Before this change, SSL/TLS options were not consistent. http.conf and manager.conf required the 'ssl' prefix while sip.conf used options with the 'tls' prefix. While the options had different names in different conf files, they all did the exact same thing. Now, instead of mixing 'ssl' or 'tls' prefixes to do the same thing depending on what conf file you're in, all SSL/TLS options use the 'tls' prefix. For example. 'sslenable' in http.conf and manager.conf is now 'tlsenable' which matches what already existed in sip.conf. Since this has the potential to break backwards compatibility, previous options containing the 'ssl' prefix still work, but they are no longer documented in the sample.conf files. The change is noted in the CHANGES file though.
Review: http://reviewboard.digium.com/r/237/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@191028 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Adds option to specify a private key .pem file when configuring TLS or SSL in AMI, HTTP, and SIP. Before this, the certificate file was used for both the public and private key. It is possible for this file to hold both, but most configurations allow for a separate private key file to be specified. Clarified in .conf files how these options are to be used. The current conf files do not explain how the private key is handled at all, so without knowledge of Asterisk's TLS implementation, it would be hard to know for sure what was going on or how to set it up.
Review: http://reviewboard.digium.com/r/234/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@190545 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
There is a lot that could be said about this, but the patch is a big
improvement for performance, stability, code maintainability,
and ease of future code development.
The channel list is no longer an unsorted linked list. The main container
for channels is an astobj2 hash table. All of the code related to searching
for channels or iterating active channels has been rewritten. Let n be
the number of active channels. Iterating the channel list has gone from
O(n^2) to O(n). Searching for a channel by name went from O(n) to O(1).
Searching for a channel by extension is still O(n), but uses a new method
for doing so, which is more efficient.
The ast_channel object is now a reference counted object. The benefits
here are plentiful. Some benefits directly related to issues in the
previous code include:
1) When threads other than the channel thread owning a channel wanted
access to a channel, it had to hold the lock on it to ensure that it didn't
go away. This is no longer a requirement. Holding a reference is
sufficient.
2) There are places that now require less dealing with channel locks.
3) There are places where channel locks are held for much shorter periods
of time.
4) There are places where dealing with more than one channel at a time becomes
_MUCH_ easier. ChanSpy is a great example of this. Writing code in the
future that deals with multiple channels will be much easier.
Some additional information regarding channel locking and reference count
handling can be found in channel.h, where a new section has been added that
discusses some of the rules associated with it.
Mark Michelson also assisted with the development of this patch. He did the
conversion of ChanSpy and introduced a new API, ast_autochan, which makes it
much easier to deal with holding on to a channel pointer for an extended period
of time and having it get automatically updated if the channel gets masqueraded.
Mark was also a huge help in the code review process.
Thanks to David Vossel for his assistance with this branch, as well. David
did the conversion of the DAHDIScan application by making it become a wrapper
for ChanSpy internally.
The changes come from the svn/asterisk/team/russell/ast_channel_ao2 branch.
Review: http://reviewboard.digium.com/r/203/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@190423 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
(closes issue #14827)
Reported by: pj
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@190421 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r190356 | russell | 2009-04-23 16:07:07 -0500 (Thu, 23 Apr 2009) | 2 lines
Remove a bogus ast_channel_unlock().
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@190357 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
If transport in sip.conf is switched from UDP to TCP, Asterisk segfaults right after issuing a sip reload. The problem is the socket type is changed to TCP but the fd may still be present for UDP. Later, when the TCP session should be created or set using an existing one, it isn't because the old file descriptor is still present. Now every time transport is changed during a sip.conf reload, the file descriptor is set to -1, signifying it must be created or found.
(closes issue #14727)
Reported by: pj
Tested by: dvossel
Review: http://reviewboard.digium.com/r/229/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@189771 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This issue crept up because of a reference count issue on non-UDP based dialogs.
The dialog reference count was increased when transmitting a packet reliably but never
decreased. This caused the dialog structure to hang around despite being unlinked from
the dialogs container.
(closes issue #14919)
Reported by: vrban
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@189350 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
If one attempts to use the attended transfer button on a SIP phone
to transfer an unbridged call (such as a call to an IVR) but hangs
up while the target of the transfer is still ringing, we need to not
crash.
The problem was that ast_hangup was called from outside the channel
thread.
AST-211
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@189097 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r188946 | file | 2009-04-17 11:41:25 -0300 (Fri, 17 Apr 2009) | 15 lines
Fix a bug where a value used to create the channel name was bogus.
This commit fixes the scenario where an incoming call is authenticated
using a peer entry. Previously the channel name was created using either
the username setting from the sip.conf entry or the IP address that the
call came from. Now the channel name will be created using the peer name
itself. This commit will not change the way the channel name is generated
for users or friends.
(closes issue #14256)
Reported by: Nick_Lewis
Patches:
chan_sip.c-chname.patch uploaded by Nick (license 657)
Tested by: Nick_Lewis, file
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@188947 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r188835 | tilghman | 2009-04-16 16:41:13 -0500 (Thu, 16 Apr 2009) | 7 lines
Only update realtime, if global option rtupdate != false
(closes issue #14885)
Reported by: deepesh
Patches:
20090413__bug14885.diff.txt uploaded by tilghman (license 14)
Tested by: deepesh
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@188836 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
What I've done here is simply break up how a state NOTIFY is built. Originally both the XML and sip header information were built within the same function. While this does work, it does not allow for the creation of multipart/related message bodies that can contain multiple XML entries with only one sip header. Now a separate function builds the XML for each notify. This patch also makes maintaining and modifying state notifications in the future much less of a pain.
Review: http://reviewboard.digium.com/r/224/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@188742 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Per discussion with oej on IRC we need the actual IP address, not the
outbound proxy IP address, in the sa field. This change matches the already
existing code for all other uses of the outbound proxy setting.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@188247 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
127.0.0.1.
Copy the outbound proxy IP address into the SIP dialog structure as the IP address we will
be sending to. This has to be done because the logic that determines what local IP address to use
in the SIP messages is not aware of an outbound proxy being in place. It only knows what IP address
we are sending to.
(closes issue #12006)
Reported by: mnicholson
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@188067 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@187772 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
(closes issue #14784)
Reported by: pj
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@187674 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This allows for you to change the From header for outgoing MWI
NOTIFY requests. Prior to this, the best you could do was to
set a callerid in the general section of sip.conf. The problem
was that this was used for all outbound requests, not just
MWI NOTIFY requests.
AST-201
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@187560 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r187484 | mmichelson | 2009-04-09 13:51:20 -0500 (Thu, 09 Apr 2009) | 18 lines
Handle a SIP race condition (reinvite before an ACK) properly.
RFC 5047 explains the proper course of action to take if a
reINVITE is received before the ACK from a previous invite
transaction. What we are to do is to treat the reINVITE as
if it were both an ACK and a reINVITE and process it normally.
Later, when we receive the ACK we had been expecting, we will
ignore it since its CSeq is less than the current iseqno of
the sip_pvt representing this dialog.
(closes issue #13849)
Reported by: klaus3000
Patches:
13849_v2.patch uploaded by mmichelson (license 60)
Tested by: mmichelson, klaus3000
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@187488 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
(closes issue #14668)
Reported by: Netview
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@187381 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r187362 | tilghman | 2009-04-09 11:38:37 -0500 (Thu, 09 Apr 2009) | 3 lines
Permit zero-length text messages in SIP.
(Related to an issue posted to the -users list, subject "AEL2, BASE64_DECODE and hexadecimal")
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@187363 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This was accomplished using a set of options and the setoption channel callback.
The core calls into the channel driver using these options and the channel driver
either returns success or failure.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@187360 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@187105 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
While browsing chan_sip the other day, I noticed this dangerous code in
dialog_needdestroy(). This function is an ao2_callback. It is absolutely
_not_ okay to unlock the container from within this function. It's also not
clear why it was useful. Given that it could cause memory corruption, I have
removed it.
There was also a TODO comment left describing a potential implementation of
an improvement to the needdestroy handling. I'm not convinced that what was
described is the best choice here, so I have briefly described the way that
this function is used today that could be improved.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@186928 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@186899 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
(closes issue #14686)
Reported by: davidw
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@186837 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@186653 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
a dialplan variable.
This adds a dialplan variable (SIP_CODEC_OUTBOUND) which controls
the codec offered for an outgoing SIP call. This is much like the
SIP_CODEC dialplan variable and has the same restrictions. The codec
set must be one that is configured for the call.
(closes issue #13243)
Reported by: samdell3
Patches:
13243.diff uploaded by file (license 11)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@186624 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Asterisk.
The channel drivers which have been most heavily tested with these enhancements are
chan_sip and chan_misdn. Further work is being done to add Q.SIG support and will be
introduced in a later commit. chan_skinny has code added to it here, but according
to user pj, the support on chan_skinny is not working as of now. This will be fixed in
a later commit.
A special thanks goes out to bugtracker user gareth for getting the ball rolling and
providing the initial support for this work. Without his initial work on this, this would
not have been nearly as painless as it was.
This functionality has been tested by Digium's product quality department, as well as a
customer site running thousands of calls every day. In addition, many many many many bugtracker
users have tested this, too.
(closes issue #8824)
Reported by: gareth
Review: http://reviewboard.digium.com/r/201
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@186525 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
call.
This API call now waits for a special frame from the underlying channel driver to
indicate success or failure. This allows the return value to truly convey whether
the transfer worked or not. In the case of the Transfer() dialplan application this
means the value of the TRANSFERSTATUS dialplan variable is actually true.
(closes issue #12713)
Reported by: davidw
Tested by: file
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@186382 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This API provides a generic way for multiple RTP stacks to be
integrated into Asterisk. Right now there is only one present, res_rtp_asterisk,
which is the existing Asterisk RTP stack. Functionality wise this commit
performs the same as previously. API documentation can be viewed in the
rtp_engine.h header file.
Review: http://reviewboard.digium.com/r/209/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@186078 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
................
r186059 | tilghman | 2009-04-02 12:09:13 -0500 (Thu, 02 Apr 2009) | 9 lines
Merged revisions 186056 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.2
........
r186056 | tilghman | 2009-04-02 12:02:18 -0500 (Thu, 02 Apr 2009) | 2 lines
Fix for AST-2009-003
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@186060 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
