Age | Commit message (Collapse) | Author |
|
Using the AMI redirect action to take an ISDN call out of a parking lot
causes the MOH state to get confused. The redirect action does not take
the call off of hold. When the call is subsequently parked again, the
call no longer hears MOH.
* Make chan_dahdi/sig_pri restart MOH on repeated AST_CONTROL_HOLD frames
if it is already in a state where it is supposed to be sending MOH. The
MOH may have been stopped by other means. (Such as killing the generator.)
This simple fix is done rather than making the AMI redirect action post an
AST_CONTROL_UNHOLD unconditionally when it redirects a channel and thus
potentially breaking something with an unexpected AST_CONTROL_UNHOLD.
(closes issue ABE-2873)
Patches:
jira_abe_2873_c.3_bier.patch (license #5621) patch uploaded by rmudgett
........
Merged revisions 372521 from https://origsvn.digium.com/svn/asterisk/be/branches/C.3-bier
........
Merged revisions 372522 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 372523 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@372524 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This adds HANGUPCAUSE information to called channels so that hangup
handlers can, in conjunction with predial dialplan execution, access
the hangupcause information when the dialed channel hangs up on a
one-to-one basis instead of a many-to-one basis as with HANGUPCAUSE
usage on the caller channel.
Review: https://reviewboard.asterisk.org/r/2069/
(closes issue ASTERISK-20198)
........
Merged revisions 371258 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@371259 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This patch adds the feature "Private representation of caller, connected
and redirecting party ids", as previously discussed with us (DATUS) and
Digium.
1. Feature motivation
Until now it is quite difficult to modify a party number or name which can
only be seen by exactly one particular instantiated technology channel
subscriber. One example where a modified party number or name on one
channel is spread over several channels are supplementary services like
call transfer or pickup. To implement these features Asterisk internally
copies caller and connected ids from one channel to another. Another
example are extension subscriptions. The monitoring entities (watchers)
are notified of state changes and - if desired - of party numbers or names
which represent the involving call parties. One major feature where a
private representation of party names is essentially needed, i.e. where a
party name shall be exclusively signaled to only one particular user, is a
private user-specific name resolution for party numbers. A lookup in a
private destination-dependent telephone book shall provide party names
which cannot be seen by any other user at any time.
2. Feature Description
This feature comes along with the implementation of additional private
party id elements for caller id, connected id and redirecting ids inside
Asterisk channels.
The private party id elements can be read or set by the user using
Asterisk dialplan functions.
When a technology channel is initiating a call, receives an internal
connected-line update event, or receives an internal redirecting update
event, it merges the corresponding public id with the private id to create
an effective party id. The effective party id is then used for protocol
signaling.
The channel technologies which initially support the private id
representation with this patch are SIP (chan_sip), mISDN (chan_misdn) and
PRI (chan_dahdi).
Once a private name or number on a channel is set and (implicitly) made
valid, it is generally used for any further protocol signaling until it is
rewritten or invalidated.
To simplify the invalidation of private ids all internally generated
connected/redirecting update events and also all connected/redirecting
update events which are generated by technology channels -- receiving
regarding protocol information - automatically trigger the invalidation of
private ids.
If not using the private party id representation feature at all, i.e. if
using only the 'regular' caller-id, connected and redirecting related
functions, the current characteristic of Asterisk is not affected by the
new extended functionality.
3. User interface Description
To grant access to the private name and number representation from the
Asterisk dialplan, the CALLERID, CONNECTEDLINE and REDIRECTING dialplan
functions are extended by the following data types. The formats of these
data types are equal to the corresponding regular 'non-private' already
existing data types:
CALLERID:
priv-all
priv-name priv-name-valid priv-name-charset priv-name-pres
priv-num priv-num-valid priv-num-plan priv-num-pres
priv-subaddr priv-subaddr-valid priv-subaddr-type priv-subaddr-odd
priv-tag
CONNECTEDLINE:
priv-name priv-name-valid priv-name-pres priv-name-charset
priv-num priv-num-valid priv-num-pres priv-num-plan
priv-subaddr priv-subaddr-valid priv-subaddr-type priv-subaddr-odd
priv-tag
REDIRECTING:
priv-orig-name priv-orig-name-valid priv-orig-name-pres priv-orig-name-charset
priv-orig-num priv-orig-num-valid priv-orig-num-pres priv-orig-num-plan
priv-orig-subaddr priv-orig-subaddr-valid priv-orig-subaddr-type priv-orig-subaddr-odd
priv-orig-tag
priv-from-name priv-from-name-valid priv-from-name-pres priv-from-name-charset
priv-from-num priv-from-num-valid priv-from-num-pres priv-from-num-plan
priv-from-subaddr priv-from-subaddr-valid priv-from-subaddr-type priv-from-subaddr-odd
priv-from-tag
priv-to-name priv-to-name-valid priv-to-name-pres priv-to-name-charset
priv-to-num priv-to-num-valid priv-to-num-pres priv-to-num-plan
priv-to-subaddr priv-to-subaddr-valid priv-to-subaddr-type priv-to-subaddr-odd
priv-to-tag
Reported by: Thomas Arimont
Review: https://reviewboard.asterisk.org/r/2030/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@371120 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
........
Merged revisions 371012 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 371013 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@371030 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370893 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This replaces all calls to alloca() with ast_alloca() which calls gcc's
__builtin_alloca() to avoid BSD semantics and removes all NULL checks
on memory allocated via ast_alloca() and ast_strdupa().
(closes issue ASTERISK-20125)
Review: https://reviewboard.asterisk.org/r/2032/
Patch-by: Walter Doekes (wdoekes)
........
Merged revisions 370642 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 370643 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370655 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
The HANGUPCAUSE hash (trunk only) meant to replace SIP_CAUSE has now
been replaced with the HANGUPCAUSE and HANGUPCAUSE_KEYS dialplan
functions to better facilitate access to the AST_CAUSE translations
for technology-specific cause codes. The HangupCauseClear application
has also been added to remove this data from the channel.
(closes issue SWP-4738)
Review: https://reviewboard.asterisk.org/r/2025/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370316 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
The awk script parses out the first instance of the DOCUMENTATION tag that it
finds within a file. If a file did not previously have a DOCUMENTATION tag
but received one due to it having an AMI event, then the XML fragment
associated with the AMI event was erroneously placed in the resulting XML
file. Without the python scripts, these XML fragments will not validate.
This patch adds DOCUMENTATION tags at the top of those files that did
not previously have them to prevent the awk script from pulling AMI event
documentation.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369910 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This patch adds some basic documentation for a number of modules. This
includes core source files in Asterisk (those in main), as well as
chan_agent, chan_dahdi, chan_local, sig_analog, and sig_pri. The DTD
has also been updated to allow referencing of AMI commands.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369905 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
It is not necessary to generate information cause code frames on every
protocol event that occurs. This removes all the instances where the
frame was not conveying a cause code and was instead just conveying a
protocol-specific message. This also corrects the generation of the
message associated with disconnects for MFC/R2 to use the MFC/R2
specific text for the disconnect cause.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369765 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Adds call ID logging changes to specific channel drivers that weren't handled
handled in phase II of Call ID Logging. Also covers logging for threads for
threads created by systems that may be involved with many different calls.
Extra special thanks to Richard for rigorous review of chan_dahdi and its
various signalling modules.
review: https://reviewboard.asterisk.org/r/1927/
review: https://reviewboard.asterisk.org/r/1950/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369414 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This is part of the DAHDI support for the Asterisk 11 "Who Hung Up?"
project and covers the implementation for the technologies implemented
in sig_analog.c and sig_pri.c. Tested on a local machine to verify
protocol and cause information is available.
Review: https://reviewboard.asterisk.org/r/1953/
(issue SWP-4222)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369185 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
........
r369001 | kpfleming | 2012-06-15 10:56:08 -0500 (Fri, 15 Jun 2012) | 11 lines
Add support-level indications to many more source files.
Since we now have tools that scan through the source tree looking for files
with specific support levels, we need to ensure that every file that is
a component of a 'core' or 'extended' module (or the main Asterisk binary)
is explicitly marked with its support level. This patch adds support-level
indications to many more source files in tree, but avoids adding them to
third-party libraries that are included in the tree and to source files
that don't end up involved in Asterisk itself.
........
r369002 | kpfleming | 2012-06-15 10:57:14 -0500 (Fri, 15 Jun 2012) | 3 lines
Add a script to enable finding source files without support-levels defined.
........
Merged revisions 369001-369002 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 369005 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369013 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
commands.
* Fix sig_pri_lock_owner() to avoid deadlock properly.
* Code pri_grab() better.
* Fix sig_ss7_lock_owner() to avoid deadlock properly.
* Code ss7_grab() better.
(closes issue ASTERISK-19854)
Reported by: Jaxon
Patches:
jira_asterisk_19854_v1.8.6.patch (license #5621) patch uploaded by rmudgett (Modified to do the same thing to sig_ss7)
Tested by: Jaxon
........
Merged revisions 367976 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 367978 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@367979 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
disconnecting the call.
Some switches may not handle the call-deflection/call-rerouting message if
the call is disconnected too soon after being sent. Asteisk was not
waiting for any reply before disconnecting the call.
* Added a 5 second delay before disconnecting the call to wait for a
potential response if the peer does not disconnect first.
(closes issue ASTERISK-19708)
Reported by: mehdi Shirazi
Patches:
jira_asterisk_19708_v1.8.patch (license #5621) patch uploaded by rmudgett
Tested by: rmudgett
........
Merged revisions 363730 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 363734 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@363740 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Some ISDN switches occasionally fail to send a RESTART ACKNOWLEDGE in
response to a RESTART request.
* Made the second SETUP received after sending a RESTART request clear the
channel resetting state as if the peer had sent the expected RESTART
ACKNOWLEDGE before continuing to process the SETUP. The peer may not be
sending the expected RESTART ACKNOWLEDGE.
(issue ASTERISK-19608)
(issue AST-844)
(issue AST-815)
Patches:
jira_ast_815_v1.8.patch (license #5621) patch uploaded by rmudgett (modified)
........
Merged revisions 363687 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 363688 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@363689 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
ISDN ETSI PTP and Q.SIG (And SS7 in future) have support for reporting who
was the original redirecting party of a call.
* Added support for the original redirecting party and reason to the
REDIRECTING function and the system core as well as to the stubbed
locations in sig_pri.c.
Review: https://reviewboard.asterisk.org/r/1829/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@362779 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Several telcos bring the BRI PTMP layer 1 down when the line is idle.
When layer 1 goes down, Asterisk cannot make outgoing calls. Incoming
calls could fail as well because the alarm processing is handled by a
different code path than the Q.931 messages.
* Add the layer1_presence configuration option to ignore layer 1 alarms
when the telco brings layer 1 down. This option can be configured by span
while the similar DAHDI driver teignorered=1 option is system wide. This
option unlike layer2_persistence does not require libpri v1.4.13 or newer.
Related to JIRA AST-598
JIRA ABE-2845
........
Merged revisions 362428 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 362429 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@362430 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Q.951 indicates that when the presentation indicator is "Number not
available due to interworking" for a number then the screening indicator
field should be "Network provided".
* Made ast_party_id_presentation() return AST_PRES_NUMBER_NOT_AVAILABLE
when the presentation is "Number not available due to interworking". This
fix makes Asterisk consistent and it also makes it consistent with earlier
branches as far as this presentation value is concerned.
* Made pri_to_ast_presentation() and ast_to_pri_presentation() conversions
handle the "Number not available due to interworking" case better in
sig_pri.c. This change is possible because the minimum required libpri
version (v1.4.11) has the necessary defines in libpri.h.
........
Merged revisions 360309 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 360310 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@360311 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Added new chan_dahdi.conf colp_send option parameter to block connected
line updates per span.
(closes issue ASTERISK-17025)
Reported by: Michael Smith
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@358997 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
The check if an ISDN call is bridged before it could be placed on hold is
not necessary and is overly restrictive. The check was originally done to
prevent problems with call transfers in case a user tried to transfer a
call connected to an application to another call connected to an
application. The ISDN transfer code has not required this restriction for
quite some time because ECT could transfer any two active calls to each
other.
* Remove ISDN hold restriction for calls connected to applications.
* Made ast_waitfordigit_full() ignore AST_CONTROL_HOLD and
AST_CONTROL_UNHOLD instead of generating a warning message.
(closes issue ASTERISK-19388)
Reported by: Birger Harzenetter
Tested by: rmudgett
........
Merged revisions 357894 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 357895 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@357896 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Review: https://reviewboard.asterisk.org/r/1784/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@357721 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Review: https://reviewboard.asterisk.org/r/1773/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@357542 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
(closes issue ASTERISK-19397)
Reported by: Birger Harzenetter
Patches:
nochannel-cause.patch (license #5870) patch uploaded by Birger Harzenetter
........
Merged revisions 357407 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 357408 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@357409 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Review: https://reviewboard.asterisk.org/r/1753/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@356042 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
'p->outgoing' in chan_dahdi and sig_analog wern't kept in sync, particulary FXS ast_hangup didn't clear the 'outgoing' flag.
sig_pri and sig_ss7 were keeping 'outgoing' flag insync.
Now provides a callback for all the low level sig_XXX modules.
(issue ASTERISK-19316)
alecdavis (license 585)
Reported by: Jeremy Pepper
Tested by: alecdavis
Review: https://reviewboard.asterisk.org/r/1747/
........
Merged revisions 355850 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 355851 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@355852 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Review: https://reviewboard.asterisk.org/r/1733/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@354968 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This feature also causes the sending complete ie to be sent for switch
types that do not automatically send the ie. (EuroISDN/ETSI)
The main difference between dialing Dial(DAHDI/g0/1234w888) and
Dial(DAHDI/g0/1234,,D(888)) is the sending of the sending complete ie.
(closes issue ASTERISK-19176)
Reported by: rmudgett
Tested by: rmudgett
........
Merged revisions 353867 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 353868 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@353872 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Review: https://reviewboard.asterisk.org/r/1707/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@353685 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Continue channel opaque-ification by wrapping all of the stringfields.
Eventually, we will restrict what can actually set these variables, but
the purpose for now is to hide the implementation and keep people from
adding code that directly accesses the channel structure. Semantic
changes will follow afterward.
Review: https://reviewboard.asterisk.org/r/1661/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@352348 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
There are many benefits to making the ast_channel an opaque handle, from
increasing maintainability to presenting ways to kill masquerades. This patch
kicks things off by taking things a field at a time, renaming the field to
'__do_not_use_${fieldname}' and then writing setters/getters and converting the
existing code to using them. When all fields are done, we can move ast_channel
to a C file from channel.h and lop off the '__do_not_use_'.
This patch sets up main/channel_interal_api.c to be the only file that actually
accesses the ast_channel's fields directly. The intent would be for any API
functions in channel.c to use the accessor functions. No more monkeying around
with channel internals. We should use our own APIs.
The interesting changes in this patch are the addition of
channel_internal_api.c, the moving of the AST_DATA stuff from channel.c to
channel_internal_api.c (note: the AST_DATA stuff will have to be reworked to
use accessor functions when ast_channel is really opaque), and some re-working
of the way channel iterators/callbacks are handled so as to avoid creating fake
ast_channels on the stack to pass in matching data by directly accessing fields
(since "name" is a stringfield and the fake channel doesn't init the
stringfields, you can't use the ast_channel_name_set() function). I went with
ast_channel_name(chan) for a getter, and ast_channel_name_set(chan, name) for a
setter.
The majority of the grunt-work for this change was done by writing a semantic
patch using Coccinelle ( http://coccinelle.lip6.fr/ ).
Review: https://reviewboard.asterisk.org/r/1655/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@350223 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Dead code makes programmers sick. I am sick of looking at it.
........
Merged revisions 345546 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 345558 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@345559 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
It is fortunate that the typo does not alter generated code since the
e->restart.channel and e->ring.channel members are in the same position.
(closes issue ASTERISK-18868)
Reported by: zvision
Patches:
sig_pri.c.diff (License #5755) patch uploaded by zvision
........
Merged revisions 345370 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 345371 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@345375 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
The "No D-channels available! Using Primary channel as D-channel anyway!"
WARNING message has been confusing on non-NFAS setups. The message refers
to things that are NFAS specific.
* Changed the warning to several different warnings to be more accurate
for the situation and less confusing as a result:
"No D-channels up! Switching selected D-channel from X to Y.",
"No D-channels up!", and
"D-channel is down!".
........
Merged revisions 342484 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 342485 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@342486 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/10
................
r338323 | rmudgett | 2011-09-28 17:36:57 -0500 (Wed, 28 Sep 2011) | 12 lines
Merged revisions 338322 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r338322 | rmudgett | 2011-09-28 17:35:52 -0500 (Wed, 28 Sep 2011) | 5 lines
Make duplicate call ptr warning message more helpful.
* Adds the value of the call ptr to the duplicate call ptr message to help
trace why there is a duplicate call ptr.
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@338324 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/10
................
r337721 | rmudgett | 2011-09-22 16:37:41 -0500 (Thu, 22 Sep 2011) | 25 lines
Merged revisions 337720 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r337720 | rmudgett | 2011-09-22 16:29:46 -0500 (Thu, 22 Sep 2011) | 18 lines
Made ISDN not add numbering plan prefix strings to empty numbers.
When the Caller-ID is restricted, the expected behavior is for the
Caller-ID to be blank. In chan_dahdi, the national prefix is placed onto
the Caller-ID number even if it is restricted (empty) causing the
Caller-ID to be the national prefix rather than blank.
This behavior was lost when sig_pri was extracted from chan_dahdi.
* Made not add prefix strings to empty connected line, calling, and ANI
number strings.
(closes issue ASTERISK-18577)
Reported by: Kris Shaw
Patches:
jira_asterisk_18577_v1.8.patch (license #5621) patch uploaded by rmudgett
Tested by: Kris Shaw
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@337722 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/10
................
r336570 | rmudgett | 2011-09-19 10:32:00 -0500 (Mon, 19 Sep 2011) | 11 lines
Merged revisions 336569 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r336569 | rmudgett | 2011-09-19 10:25:34 -0500 (Mon, 19 Sep 2011) | 4 lines
Rework sig_pri_hangup() to be simpler and clearer.
JIRA AST-675
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@336571 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/10
................
r335078 | mjordan | 2011-09-09 11:27:01 -0500 (Fri, 09 Sep 2011) | 29 lines
Merged revisions 335064 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r335064 | mjordan | 2011-09-09 11:09:09 -0500 (Fri, 09 Sep 2011) | 23 lines
Updated SIP 484 handling; added Incomplete control frame
When a SIP phone uses the dial application and receives a 484 Address
Incomplete response, if overlapped dialing is enabled for SIP, then
the 484 Address Incomplete is forwarded back to the SIP phone and the
HANGUPCAUSE channel variable is set to 28. Previously, the Incomplete
application dialplan logic was automatically triggered; now, explicit
dialplan usage of the application is required.
Additionally, this patch adds a new AST_CONTOL_FRAME type called
AST_CONTROL_INCOMPLETE. If a channel driver receives this control frame,
it is an indication that the dialplan expects more digits back from the
device. If the device supports overlap dialing it should attempt to
notify the device that the dialplan is waiting for more digits; otherwise,
it can handle the frame in a manner appropriate to the channel driver.
(closes issue ASTERISK-17288)
Reported by: Mikael Carlsson
Tested by: Matthew Jordan
Review: https://reviewboard.asterisk.org/r/1416/
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@335079 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/10
................
r332265 | rmudgett | 2011-08-17 11:01:29 -0500 (Wed, 17 Aug 2011) | 33 lines
Merged revisions 332264 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r332264 | rmudgett | 2011-08-17 10:51:08 -0500 (Wed, 17 Aug 2011) | 26 lines
Outgoing BRI calls fail when using Asterisk 1.8 with HA8, HB8, and B410P cards.
France Telecom brings layer 2 and layer 1 down on BRI lines when the line
is idle. When layer 1 goes down Asterisk cannot make outgoing calls and
the HA8 and HB8 cards also get IRQ misses.
The inability to make outgoing calls is because the line is in red alarm
and Asterisk will not make calls over a line it considers unavailable.
The IRQ misses for the HA8 and HB8 card are because the hardware is
switching clock sources from the line which just brought layer 1 down to
internal timing.
There is a DAHDI option for the B410P card to not tell Asterisk that layer
1 went down so Asterisk will allow outgoing calls: "modprobe wcb4xxp
teignored=1". There is a similar DAHDI option for the HA8 and HB8 cards:
"modprobe wctdm24xxp bri_teignored=1". Unfortunately that will not clear
up the IRQ misses when the telco brings layer 1 down.
* Add layer 2 persistence option to customize the layer 2 behavior on BRI
PTMP lines. The new option has three settings: 1) Use libpri default
layer 2 setting. 2) Keep layer 2 up. Bring layer 2 back up when the peer
brings it down. 3) Leave layer 2 down when the peer brings it down.
Layer 2 will be brought up as needed for outgoing calls.
JIRA AST-598
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@332270 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/10
................
r330051 | rmudgett | 2011-07-28 12:10:37 -0500 (Thu, 28 Jul 2011) | 29 lines
Merged revisions 330050 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r330050 | rmudgett | 2011-07-28 12:04:24 -0500 (Thu, 28 Jul 2011) | 22 lines
Merged revisions 330033 from
https://origsvn.digium.com/svn/asterisk/be/branches/C.3-bier
..........
r330033 | rmudgett | 2011-07-28 11:26:38 -0500 (Thu, 28 Jul 2011) | 15 lines
Datacalls with B410P fail.
Incoming and outgoing call legs of a data call are using different
formats: a-law, u-law. When the call is bridged, the media stream is run
through translation to convert the media formats. The translation is bad
for data calls.
* Make incoming call that does not explicitly specify u-law or a-law use
the DAHDI channel's default law. The outgoing call always uses the
default law from the DAHDI channel.
(closes issue ABE-2800)
Patches:
jira_abe_2800_companding.patch (license #5621) patch uploaded by rmudgett
..........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@330052 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/10
........
r329257 | russell | 2011-07-21 15:22:36 -0500 (Thu, 21 Jul 2011) | 2 lines
s/1.10/10.0/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@329258 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
The NEC SV8300 rejects the Q931_IE_TIME_DATE for Q.SIG.
Add option to specify if and how much of the current time is put in
Q931_IE_TIME_DATE.
* Send date/time ie never.
* Send date/time ie date only.
* Send date/time ie date and hour.
* Send date/time ie date, hour, and minute.
* Send date/time ie date, hour, minute, and second.
* Send date/time ie default: Libpri will send date and hhmm only when in
NT PTMP mode to support ISDN phones.
(closes issue #19221)
Reported by: kenner
JIRA SWP-3396
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@319427 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r318783 | rmudgett | 2011-05-12 20:47:05 -0500 (Thu, 12 May 2011) | 14 lines
PRI early media won't ring.
And another way to pass early media. Don't indicate that there is inband
information present, just assume that the B channel is connected.
* Restore clearing the dialing flag Rx squelch unconditionally when a
PROCEEDING message comes in.
(closes issue #19268)
Reported by: tbsky
Patches:
issue19268_v1.8.patch uploaded by rmudgett (license 664)
Tested by: tbsky
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@318784 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r318499 | rmudgett | 2011-05-10 18:41:08 -0500 (Tue, 10 May 2011) | 15 lines
Unable to pickup DAHDI/PRI call because call state is reported as DIALING.
The channel state is not updated to RINGING when an ALERTING message is
received. Regression caused when sig_pri.c (also sig_ss7.c) extracted
from chan_dahdi.c.
* Added missing channel state update to RINGING when the
AST_CONTROL_RINGING frame is queued for ISDN and SS7.
(closes issue #19257)
Reported by: alecdavis
Patches:
issue19257_v1.8_v2.patch uploaded by rmudgett (license 664)
Tested by: alecdavis, rmudgett
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@318500 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r318231 | rmudgett | 2011-05-09 11:57:18 -0500 (Mon, 09 May 2011) | 41 lines
Don't get early media for ISDN on outgoing calls.
It looks to be a long-standing misinterpretation of the progress indicator
ie values:
1 - Call is not end-to-end ISDN; further call progress information may be
available in-band.
8 - In-band information or an appropriate pattern is now available.
Only value 8 is handled by chan_dahdi/sig_pri. The 1 value is not handled
as early media probably because the meaning of the second half of it's
description was overlooked.
* Test to see if either PRI_PROG_CALL_NOT_E2E_ISDN(1) or
PRI_PROG_INBAND_AVAILABLE(8) bits are set to open the media path.
(closes issue #18868)
Reported by: isrl
Patches:
issue18868_19246_v1.8.patch uploaded by rmudgett (license 664)
Tested by: satish_lx
..........
No inband progress on PRI_EVENT_RINGING even if inband flag set.
My ISDN-PRI provider sends an ALERTING with "Inband information or
appropriate pattern now available", but Asterisk only generates and passes
the RING to the SIP extension, not the inband message. Unfortunately, the
inband message is not a ringback tone but a prompt that says the number is
not in service. The SIP extension then hears two rings and the call is
hungup which confuses the caller.
* Post an AST_CONTROL_PROGRESS as well as opening the media path if inband
audio is indicated with an ALERTING message.
(closes issue #19246)
Reported by: cristiandimache
Patches:
issue19246_v1.8.patch uploaded by rmudgett (license 664)
Tested by: cristiandimache
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@318232 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r316224 | rmudgett | 2011-05-03 14:18:30 -0500 (Tue, 03 May 2011) | 16 lines
The dahdi_hangup() call does not clean up the channel fully.
After dahdi_hangup() has supposedly hungup an ISDN channel there is still
traffic on the S0-bus because the channel was not cleaned up fully.
Shuffled the hangup code to include some missing cleanup. Also fixed some
code formatting in the area. I think the primary missing clean up code
was the call to tone_zone_play_tone() to turn off any active tones on the
channel.
(closes issue #19188)
Reported by: jg1234
Patches:
issue19188_v1.8.patch uploaded by rmudgett (license 664)
Tested by: jg1234
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@316240 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
PRIShowSpans works like the AMI action DAHDIShowChannels but for PRI
spans. It is similar to the CLI command "pri show spans".
(closes issue #15980)
Reported by: dwery
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@314735 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@314734 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
The "controlling user number" is always the number of the voice mail box
which is identical with the subscriber number itself. This number which
is listed in the ISDN phone MWI menu cannot be called back to contact the
voice mail box. The controlling user number should be made configurable.
JIRA ABE-2738
JIRA SWP-2846
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@314116 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Factor out the equivalent function for analog.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@313100 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|