summaryrefslogtreecommitdiff
path: root/channels/sig_pri.h
AgeCommit message (Collapse)Author
2015-07-17sig_pri.h: force_restart_unavailable_chans in wrong scopePatric Marschall
In channels/sig_pri.h, struct sig_pri_span, the field force_restart_unavailable_chans is only defined if #if defined(HAVE_PRI_MCID) is true. All other occurences of force_restart_unavailable_chans are outside of the #if defined(HAVE_PRI_MCID) endif scope. ASTERISK-25257 #close Reported by: Patric Marschall Change-Id: I071de89cc2cd0d85927a013036e235851f672549
2015-04-30chan_dahdi: Add the chan_dahdi.conf force_restart_unavailable_chans option.Richard Mudgett
Some telco switches occasionally ignore ISDN RESTART requests. The fix for ASTERISK-19608 added an escape clause for B channels in the restarting state if the telco ignores a RESTART request. If the telco fails to acknowledge the RESTART then Asterisk will assume the telco acknowledged the RESTART on the second call attempt requesting the B channel by the telco. The escape clause is good for dealing with RESTART requests in general but it does cause the next call for the restarting B channel to be rejected if the telco insists the call must go on that B channel. chan_dahdi doesn't really need to issue a RESTART request in response to receiving a cause 44 (Requested channel not available) code. Sending the RESTART in such a situation is not required (nor prohibited) by the standards. I think chan_dahdi does this for historical reasons to deal with buggy peers to get channels unstuck in a similar fashion as the chan_dahdi.conf resetinterval option. * Add the chan_dahdi.conf force_restart_unavailable_chans compatability option that when disabled will prevent chan_dahdi from trying to RESTART the channel in response to a cause 44 code. ASTERISK-25034 #close Reported by: Richard Mudgett Change-Id: Ib8b17a438799920f4a2038826ff99a1884042f65
2014-07-03chan_dahdi: Add inband_on_setup_ack compatibility option.Richard Mudgett
The new inband_on_setup_ack option causes Asterisk to assume inband audio may be present when a SETUP_ACKNOWLEDGE message is received. Q.931 Section 5.1.3 says that in scenarios with overlap dialing, when a dialtone is sent from the network side, progress indicator 8 "Inband info now available" MAY be sent to the CPE if no digits were received with the SETUP. It is thus implied that the ie is mandatory if digits came with the SETUP and dialtone is needed. This option should be enabled, when the network sends dialtone and you want to hear it, but the network doesn't send the progress indicator when needed. NOTE: For Q.SIG setups this option should be enabled when outgoing overlap dialing is also enabled because Q.SIG does not send the progress indicator with the SETUP ACK. The commit -r413714 (AST-1338) which causes this issue was dealing with a SIP-to-ISDN interoperability issue. This commit is a merge of the two patches indicated below. ASTERISK-23897 #close Reported by: Pavel Troller Patches: pri-4.diff (license #6302) patch uploaded by Pavel Troller jira_asterisk_23897_v11.patch (license #5621) patch uploaded by rmudgett Review: https://reviewboard.asterisk.org/r/3633/ ........ Merged revisions 417956 from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged revisions 417957 from http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged revisions 417958 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@417976 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2014-06-23suspended destructions of pri spans on eventsTzafrir Cohen
If a DAHDI span disappears, we wish for its representation in Asterisk to be destroyed as well. The information about the span's removal may come from several paths: 1. DAHDI sends DAHDI_EVENT_REMOVE on every channel. 2. An extra DAHDI_EVENT_REMOVED is sent on every subsequent call to DAHDI_GET_EVENT. 3. Every read (including the internal one by libpri on the D-channel) returns -ENODEV. Asterisk responsds to DAHDI_EVENT_REMOVE on a channel by destroying it. Destroying a channel requires holding the channel list lock (iflock). Destroying a channel that is part of a span requires holding the span's lock. Destroying a channel from a context that holds the span lock, while at the same time another channel is destroyed directly, leads to a deadlock. Solution: don't destroy span while holding the channels list lock. Thus changes in this patch: * Deferring removal of PRI spans in response to events: doomed spans are collected on a list. * Doomed spans are removed periodically by the monitor thread. * ENODEV reads from the D-channel will warant the same deferred removal. Review: https://reviewboard.asterisk.org/r/3548/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@417059 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2014-03-07uniqueid: Fix chan_dahdi, sig_pri, sig_ss7, test_cdr, and test_cel compiler ↵Richard Mudgett
errors. (issue ASTERISK-23120) ........ Merged revisions 410171 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@410174 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2013-12-19Voicemail: Remove mailbox identifier format (box@context) assumptions in the ↵Richard Mudgett
system. This change is in preparation for external MWI support. Removed code from the system for normal mailbox handling that appends @default to the mailbox identifier if it does not have a context. The only exception is the legacy hasvoicemail users.conf option. The legacy option will only work for app_voicemail mailboxes. The system cannot make any assumptions about the format of the mailbox identifer used by app_voicemail. chan_sip and chan_dahdi/sig_pri had the most changes because they both tried to interpret the mailbox identifier. chan_sip just stored and compared the two components. chan_dahdi actually used the box information. The ISDN MWI support configuration options had to be reworked because chan_dahdi was parsing the box@context format to get the box number. As a result the mwi_vm_boxes chan_dahdi.conf option was added and is documented in the chan_dahdi.conf.sample file. Review: https://reviewboard.asterisk.org/r/3072/ ........ Merged revisions 404348 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@404350 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2013-08-17Strip down the old event systemKinsey Moore
This removes unused code, event types, IE pltypes, and event IE types where possible and makes several functions private that were once public. This includes a renumbering of the remaining event and IE types which breaks binary compatibility with previous versions. The last remaining consumers of the old event system (or parts thereof) are main/security_events.c, res/res_security_log.c, tests/test_cel.c, tests/test_event.c, main/cel.c, and the CEL backends. Review: https://reviewboard.asterisk.org/r/2703/ (closes issue ASTERISK-22139) git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396887 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2013-06-07Refactor chan_dahdi/sig_analog/sig_pri and chan_misdn to use the common ↵Richard Mudgett
transfer functions. (closes issue ASTERISK-21523) Reported by: Matt Jordan (closes issue ASTERISK-21524) Reported by: Matt Jordan Review: https://reviewboard.asterisk.org/r/2600/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@390804 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2013-04-03chan_dahdi: Add inband_on_proceeding compatibility option.Richard Mudgett
The new inband_on_proceeding option causes Asterisk to assume inband audio may be present when a PROCEEDING message is received. Q.931 Section 5.1.2 says the network cannot assume that the CPE side has attached to the B channel at this time without explicitly sending the progress indicator ie informing the CPE side to attach to the B channel for audio. However, some non-compliant ISDN switches send a PROCEEDING without the progress indicator ie indicating inband audio is available and assume that the CPE device has connected the media path for listening to ringback and other messages. ASTERISK-17834 which causes this issue was dealing with a non-compliant network switch. (closes issue ASTERISK-21151) Reported by: Gianluca Merlo Tested by: rmudgett ........ Merged revisions 384685 from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged revisions 384689 from http://svn.asterisk.org/svn/asterisk/branches/11 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@384696 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2013-03-16Transition MWI to Stasis-coreKinsey Moore
Remove MWI's dependency on the event system by moving it to Stasis-core. This also introduces forwarding topic pools in Stasis-core which aggregate many dynamically allocated topics into a single primary topic. Review: https://reviewboard.asterisk.org/r/2368/ (closes issue ASTERISK-21097) Patch-by: Kinsey Moore git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@383284 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2012-08-30Clean up doxygen warningsMatthew Jordan
This patch fixes numerous doxygen warnings across Asterisk. It also updates the makefile to regenerate the doxygen configuration on the local system before running doxygen to help prevent warnings/errors on the local system. Much thanks to Andrew for tackling one of the Asterisk janitor projects! (issue ASTERISK-20259) Reported by: Andrew Latham Patches: doxygen_partial.diff uploaded by Andrew Latham (license 5985) make_progdocs.diff uploaded by Andrew Latham (license 5985) git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@371989 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2012-08-08Convert sig_pri to use a global callback table.Richard Mudgett
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370893 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2012-04-25Clear ISDN channel resetting state if the peer continues to use it.Richard Mudgett
Some ISDN switches occasionally fail to send a RESTART ACKNOWLEDGE in response to a RESTART request. * Made the second SETUP received after sending a RESTART request clear the channel resetting state as if the peer had sent the expected RESTART ACKNOWLEDGE before continuing to process the SETUP. The peer may not be sending the expected RESTART ACKNOWLEDGE. (issue ASTERISK-19608) (issue AST-844) (issue AST-815) Patches: jira_ast_815_v1.8.patch (license #5621) patch uploaded by rmudgett (modified) ........ Merged revisions 363687 from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged revisions 363688 from http://svn.asterisk.org/svn/asterisk/branches/10 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@363689 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2012-04-18Add ability to ignore layer 1 alarms for BRI PTMP lines.Richard Mudgett
Several telcos bring the BRI PTMP layer 1 down when the line is idle. When layer 1 goes down, Asterisk cannot make outgoing calls. Incoming calls could fail as well because the alarm processing is handled by a different code path than the Q.931 messages. * Add the layer1_presence configuration option to ignore layer 1 alarms when the telco brings layer 1 down. This option can be configured by span while the similar DAHDI driver teignorered=1 option is system wide. This option unlike layer2_persistence does not require libpri v1.4.13 or newer. Related to JIRA AST-598 JIRA ABE-2845 ........ Merged revisions 362428 from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged revisions 362429 from http://svn.asterisk.org/svn/asterisk/branches/10 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@362430 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2012-03-13Add ability for chan_dahdi ISDN to block connected line updates per span.Richard Mudgett
Added new chan_dahdi.conf colp_send option parameter to block connected line updates per span. (closes issue ASTERISK-17025) Reported by: Michael Smith git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@358997 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2012-02-18push 'outgoing' flag from sig_XXX up to chan_dahdiAlec L Davis
'p->outgoing' in chan_dahdi and sig_analog wern't kept in sync, particulary FXS ast_hangup didn't clear the 'outgoing' flag. sig_pri and sig_ss7 were keeping 'outgoing' flag insync. Now provides a callback for all the low level sig_XXX modules. (issue ASTERISK-19316) alecdavis (license 585) Reported by: Jeremy Pepper Tested by: alecdavis Review: https://reviewboard.asterisk.org/r/1747/ ........ Merged revisions 355850 from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged revisions 355851 from http://svn.asterisk.org/svn/asterisk/branches/10 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@355852 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2012-02-06Restore alternate SIG_PRI_DEBUG_DEFAULT meaning.Richard Mudgett
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@354174 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2012-02-06Allow more control over the output of pri debugKinsey Moore
This changes the debuglevel of 'pri set debug' to a bit mask allowing the user to independently select bits of output: 1 libpri internals including state machine 2 Decoded Q.931 messages 4 Decoded Q.921 headers 8 raw hex dump of the full frames Additionally, this ensures that the meaning of "on" does not change and intrudces intense and hex to simplify usage. (closes issue ASTERISK-17159) Original-patch-by: wimpy git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@354165 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2012-02-02Restore the 'w' modifier support for ISDN spans. Dial(DAHDI/g0/1234w888)Richard Mudgett
This feature also causes the sending complete ie to be sent for switch types that do not automatically send the ie. (EuroISDN/ETSI) The main difference between dialing Dial(DAHDI/g0/1234w888) and Dial(DAHDI/g0/1234,,D(888)) is the sending of the sending complete ie. (closes issue ASTERISK-19176) Reported by: rmudgett Tested by: rmudgett ........ Merged revisions 353867 from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged revisions 353868 from http://svn.asterisk.org/svn/asterisk/branches/10 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@353872 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2012-02-01Constify some more channel driver technology callback parameters.Richard Mudgett
Review: https://reviewboard.asterisk.org/r/1707/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@353685 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2011-08-17Merged revisions 332265 via svnmerge from Richard Mudgett
https://origsvn.digium.com/svn/asterisk/branches/10 ................ r332265 | rmudgett | 2011-08-17 11:01:29 -0500 (Wed, 17 Aug 2011) | 33 lines Merged revisions 332264 via svnmerge from https://origsvn.digium.com/svn/asterisk/branches/1.8 ........ r332264 | rmudgett | 2011-08-17 10:51:08 -0500 (Wed, 17 Aug 2011) | 26 lines Outgoing BRI calls fail when using Asterisk 1.8 with HA8, HB8, and B410P cards. France Telecom brings layer 2 and layer 1 down on BRI lines when the line is idle. When layer 1 goes down Asterisk cannot make outgoing calls and the HA8 and HB8 cards also get IRQ misses. The inability to make outgoing calls is because the line is in red alarm and Asterisk will not make calls over a line it considers unavailable. The IRQ misses for the HA8 and HB8 card are because the hardware is switching clock sources from the line which just brought layer 1 down to internal timing. There is a DAHDI option for the B410P card to not tell Asterisk that layer 1 went down so Asterisk will allow outgoing calls: "modprobe wcb4xxp teignored=1". There is a similar DAHDI option for the HA8 and HB8 cards: "modprobe wctdm24xxp bri_teignored=1". Unfortunately that will not clear up the IRQ misses when the telco brings layer 1 down. * Add layer 2 persistence option to customize the layer 2 behavior on BRI PTMP lines. The new option has three settings: 1) Use libpri default layer 2 setting. 2) Keep layer 2 up. Bring layer 2 back up when the peer brings it down. 3) Leave layer 2 down when the peer brings it down. Layer 2 will be brought up as needed for outgoing calls. JIRA AST-598 ........ ................ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@332270 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2011-05-17Option needed for Q931_IE_TIME_DATE to be optional in CONNECT message.Richard Mudgett
The NEC SV8300 rejects the Q931_IE_TIME_DATE for Q.SIG. Add option to specify if and how much of the current time is put in Q931_IE_TIME_DATE. * Send date/time ie never. * Send date/time ie date only. * Send date/time ie date and hour. * Send date/time ie date, hour, and minute. * Send date/time ie date, hour, minute, and second. * Send date/time ie default: Libpri will send date and hhmm only when in NT PTMP mode to support ISDN phones. (closes issue #19221) Reported by: kenner JIRA SWP-3396 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@319427 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2011-04-21Implement AMI action PRIShowSpans.Richard Mudgett
PRIShowSpans works like the AMI action DAHDIShowChannels but for PRI spans. It is similar to the CLI command "pri show spans". (closes issue #15980) Reported by: dwery git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@314735 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2011-04-18Problems with ISDN MWI to phones.Richard Mudgett
The "controlling user number" is always the number of the voice mail box which is identical with the subscriber number itself. This number which is listed in the ISDN phone MWI menu cannot be called back to contact the voice mail box. The controlling user number should be made configurable. JIRA ABE-2738 JIRA SWP-2846 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@314116 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2011-04-08Add private lock deadlock avoidance callback to PRI and SS7.Richard Mudgett
Factor out the equivalent function for analog. git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@313100 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2011-04-05Merged revisions 312949 via svnmerge from Richard Mudgett
https://origsvn.digium.com/svn/asterisk/branches/1.8 ........ r312949 | rmudgett | 2011-04-05 13:45:24 -0500 (Tue, 05 Apr 2011) | 6 lines Crash if ISDN span layer 1 is down on initial load. Regression from -r312575 B channel shifting during negotiation. * Also combine updating the alarm flag with clearing the resetting flag. ........ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@312950 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2011-04-04Merged revisions 312575 via svnmerge from Richard Mudgett
https://origsvn.digium.com/svn/asterisk/branches/1.8 ................ r312575 | rmudgett | 2011-04-04 11:10:50 -0500 (Mon, 04 Apr 2011) | 52 lines Merged revisions 312574 via svnmerge from https://origsvn.digium.com/svn/asterisk/branches/1.6.2 ................ r312574 | rmudgett | 2011-04-04 11:00:02 -0500 (Mon, 04 Apr 2011) | 45 lines Merged revisions 312573 via svnmerge from https://origsvn.digium.com/svn/asterisk/branches/1.4 ........ r312573 | rmudgett | 2011-04-04 10:49:30 -0500 (Mon, 04 Apr 2011) | 38 lines Issues with ISDN calls changing B channels during call negotiations. The handling of the PROCEEDING message was not using the correct call structure if the B channel was changed. (The same for PROGRESS.) The call was also not hungup if the new B channel is not provisioned or is busy. * Made all call connection messages (SETUP_ACKNOWLEDGE, PROCEEDING, PROGRESS, ALERTING, CONNECT, CONNECT_ACKNOWLEDGE) ensure that they are using the correct structure and B channel. If there is any problem with the operations then the call is now hungup with an appropriate cause code. * Made miscellaneous messages (INFORMATION, FACILITY, NOTIFY) find the correct structure by looking for the call and not using the channel ID. NOTIFY is an exception with versions of libpri before v1.4.11 because a call pointer is not available for Asterisk to use. * Made all hangup messages (DISCONNECT, RELEASE, RELEASE_COMPLETE) find the correct structure by looking for the call and not using the channel ID. (closes issue #18313) Reported by: destiny6628 Tested by: rmudgett JIRA SWP-2620 (closes issue #18231) Reported by: destiny6628 Tested by: rmudgett JIRA SWP-2924 (closes issue #18488) Reported by: jpokorny JIRA SWP-2929 JIRA AST-437 (The issues fixed here are most likely causing this JIRA issue.) JIRA DAHDI-406 JIRA LIBPRI-33 (Stuck resetting flag likely fixed) ........ ................ ................ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@312579 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2011-03-04Merged revisions 309445 via svnmerge from Richard Mudgett
https://origsvn.digium.com/svn/asterisk/branches/1.8 ........ r309445 | rmudgett | 2011-03-04 09:22:04 -0600 (Fri, 04 Mar 2011) | 46 lines Get real channel of a DAHDI call. Starting with Asterisk v1.8, the DAHDI channel name format was changed for ISDN calls to: DAHDI/i<span>/<number>[:<subaddress>]-<sequence-number> There were several reasons that the channel name had to change. 1) Call completion requires a device state for ISDN phones. The generic device state uses the channel name. 2) Calls do not necessarily have B channels. Calls placed on hold by an ISDN phone do not have B channels. 3) The B channel a call initially requests may not be the B channel the call ultimately uses. Changes to the internal implementation of the Asterisk master channel list caused deadlock problems for chan_dahdi if it needed to change the channel name. Chan_dahdi no longer changes the channel name. 4) DTMF attended transfers now work with ISDN phones because the channel name is "dialable" like the chan_sip channel names. For various reasons, some people need to know which B channel a DAHDI call is using. * Added CHANNEL(dahdi_span), CHANNEL(dahdi_channel), and CHANNEL(dahdi_type) so the dialplan can determine the B channel currently in use by the channel. Use CHANNEL(no_media_path) to determine if the channel even has a B channel. * Added AMI event DAHDIChannel to associate a DAHDI channel with an Asterisk channel so AMI applications can passively determine the B channel currently in use. Calls with "no-media" as the DAHDIChannel do not have an associated B channel. No-media calls are either on hold or call-waiting. (closes issue #17683) Reported by: mrwho Tested by: rmudgett (closes issue #18603) Reported by: arjankroon Patches: issue17683_18603_v1.8_v2.patch uploaded by rmudgett (license 664) Tested by: stever28, rmudgett ........ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@309446 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2011-02-15Add CLI "pri show channels" command.Richard Mudgett
List the current mapping of DAHDI B channels to Asterisk channel names and which calls are on hold or call-waiting. Calls on hold or call-waiting are not associated with any B channel. JIRA LIBPRI-27 JIRA SWP-2547 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@307964 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2011-02-15Merged revisions 307879 via svnmerge from Richard Mudgett
https://origsvn.digium.com/svn/asterisk/branches/1.8 ........ r307879 | rmudgett | 2011-02-15 10:13:55 -0600 (Tue, 15 Feb 2011) | 37 lines No response sent for SIP CC subscribe/resubscribe request. Asterisk does not send a response if we try to subscribe for call completion after we have received a 180 Ringing. You can only subscribe for call completion when the call has been cleared. When we receive the 180 Ringing, for this call, its call-completion state is 'CC_AVAILABLE'. If we then send a subscribe message to Asterisk, it trys to change the call-completion state to 'CC_CALLER_REQUESTED'. Because this is an invalid state change, it just ignores the message. The only state Asterisk will accept our subscribe message is in the 'CC_CALLER_OFFERED' state. Asterisk will go into the 'CC_CALLER_OFFERED' when the SIP client clears the call by sending a CANCEL. Asterisk should always send a response. Even if its a negative one. The fix is to allow for the CCSS core to notify a CC agent that a failure has occurred when CC is requested. The "ack" callback is replaced with a "respond" callback. The "respond" callback has a parameter indicating either a successful response or a specific type of failure that may need to be communicated to the requester. (closes issue #18336) Reported by: GeorgeKonopacki Tested by: mmichelson, rmudgett JIRA SWP-2633 (closes issue #18337) Reported by: GeorgeKonopacki Tested by: mmichelson JIRA SWP-2634 ........ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@307883 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2011-02-08Use correct conditional for MCID send.Richard Mudgett
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@306791 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2011-02-07Pass a MCID request to the bridged channel.Richard Mudgett
Pass a MCID request to the bridged channel so the bridged channel can send it to the network. The ability to send the MCID request on an ISDN span is enabled with the new chan_dahdi.conf mcid_send option. JIRA SWP-2845 JIRA ABE-2736 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@306755 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2011-02-04Add ISDN display ie text handling options to chan_dahdi.conf.Richard Mudgett
The display ie handling can be controlled independently in the send and receive directions with the following options: * Block display text data. * Use display text in SETUP/CONNECT messages for name. * Use display text for COLP name updates (FACILITY/NOTIFY as appropriate). * Pass arbitrary display text during a call. Sent in INFORMATION messages. Received from any message that the display text was not used as a name. If the display options are not set then the options default to legacy behavior. The arbitrary display text is exchanged between bridged channels using the AST_FRAME_TEXT frame type. To send display text from the dialplan use the SendText() application when the arbitrary display text option is enabled. JIRA SWP-2688 JIRA ABE-2693 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@306396 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2011-01-27Merged from revision 304341Richard Mudgett
https://origsvn.digium.com/svn/asterisk/be/branches/C.3-bier .......... r304341 | rmudgett | 2011-01-26 16:38:39 -0600 (Wed, 26 Jan 2011) | 7 lines Add connected line chan_dahdi.conf pricpndialplan option. * Added from_channel value to prilocaldialplan option. JIRA ABE-2731 JIRA SWP-2842 .......... git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@304385 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2011-01-25Merged revisions 303771 via svnmerge from Richard Mudgett
https://origsvn.digium.com/svn/asterisk/branches/1.8 ................ r303771 | rmudgett | 2011-01-25 11:49:20 -0600 (Tue, 25 Jan 2011) | 54 lines Merged revisions 303769 via svnmerge from https://origsvn.digium.com/svn/asterisk/branches/1.6.2 ................ r303769 | rmudgett | 2011-01-25 11:42:42 -0600 (Tue, 25 Jan 2011) | 47 lines Merged revisions 303765 via svnmerge from https://origsvn.digium.com/svn/asterisk/branches/1.4 ........ r303765 | rmudgett | 2011-01-25 11:36:50 -0600 (Tue, 25 Jan 2011) | 40 lines Sending out unnecessary PROCEEDING messages breaks overlap dialing. Issue #16789 was a good idea. Unfortunately, it breaks overlap dialing through Asterisk. There is not enough information available at this point to know if dialing is complete. The ast_exists_extension(), ast_matchmore_extension(), and ast_canmatch_extension() calls are not adequate to detect a dial through extension pattern of "_9!". Workaround is to use the dialplan Proceeding() application early in non-dial through extensions. * Effectively revert issue #16789. * Allow outgoing overlap dialing to hear dialtone and other early media. A PROGRESS "inband-information is now available" message is now sent after the SETUP_ACKNOWLEDGE message for non-digital calls. An AST_CONTROL_PROGRESS is now generated for incoming SETUP_ACKNOWLEDGE messages for non-digital calls. * Handling of the AST_CONTROL_CONGESTION in chan_dahdi/sig_pri was inconsistent with the cause codes. * Added better protection from sending out of sequence messages by combining several flags into a single enum value representing call progress level. * Added diagnostic messages for deferred overlap digits handling corner cases. (closes issue #17085) Reported by: shawkris (closes issue #18509) Reported by: wimpy Patches: issue18509_early_media_v1.8_v3.patch uploaded by rmudgett (license 664) Expanded upon issue18509_early_media_v1.8_v3.patch to include analog and SS7 because of backporting requirements. Tested by: wimpy, rmudgett ........ ................ ................ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@303772 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2011-01-04Optional HOLD/RETRIEVE signaling for PTMP TE when the bridge goes on and off ↵Richard Mudgett
hold. Added the moh_signaling option to specify what to do when the channel's bridged peer puts the ISDN channel on and off of hold. Implemented as a FSM to control libpri ISDN signaling when the bridged peer places the channel on and off of hold with the AST_CONTROL_HOLD and AST_CONTROL_UNHOLD control frames. JIRA SWP-2687 JIRA ABE-2691 Review: https://reviewboard.asterisk.org/r/1063/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@300212 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2010-12-20Typos: recieved => receivedTzafrir Cohen
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@299005 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2010-11-24Merged revisions 296167 via svnmerge from Richard Mudgett
https://origsvn.digium.com/svn/asterisk/branches/1.8 ................ r296167 | rmudgett | 2010-11-24 16:49:48 -0600 (Wed, 24 Nov 2010) | 57 lines Merged revisions 296166 via svnmerge from https://origsvn.digium.com/svn/asterisk/branches/1.6.2 ................ r296166 | rmudgett | 2010-11-24 16:42:45 -0600 (Wed, 24 Nov 2010) | 50 lines Merged revisions 296165 via svnmerge from https://origsvn.digium.com/svn/asterisk/branches/1.4 ........ r296165 | rmudgett | 2010-11-24 16:41:07 -0600 (Wed, 24 Nov 2010) | 43 lines Oneway audio to SIP phone from FXS port after FXS port gets a CallWaiting pip. The FXS connected phone has to have CW/CID support to fail, as it will send back a DTMF 'A' or 'D' when it's ready to receive CallerID. A normal phone with no CID never fails. Also the SIP phone does not hear MOH when the CW call is answered. The DTMF end frame is suppressed when the phone acknowledges the CW signal for CID. The problem is the DTMF begin frame needs to be suppressed as well. The DTMF begin frame is causing SIP to start sending the DTMF RTP frames. Since the DTMF end frame is suppressed, SIP will not stop sending those DTMF RTP packets. * Suppress the DTMF begin and end frames when the channel driver is looking for DTMF digits. * Fixed a couple issues caused by not cleaning up the CID spill if you answer the CW call while it is sending the CID spill. * Fixed not sending CW/CID spill to the phone when the call is natively bridged. (Fixed by not using native bridge if CW/CID is possible.) * Suppress received audio when sending CW/CID spills. The other parties involved do not need to hear the CW/CID spills and may be confused if the CW call is for them. (closes issue #18129) Reported by: alecdavis Patches: issue_18129_v1.8_v3.patch uploaded by rmudgett (license 664) Tested by: alecdavis, rmudgett NOTE: * v1.4 does not have the main problem fixed by suppressing the DTMF start frames. The other three items fixed are relevant. * If you really must restore native bridging between analog ports, you need to disable CW/CID either by configuring chan_dahdi.conf callwaitingcallerid=no or dialing *70 before dialing the number to temporarily disable CW. ........ ................ ................ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@296168 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2010-11-12Merged revisions 294823 via svnmerge from Richard Mudgett
https://origsvn.digium.com/svn/asterisk/branches/1.8 ................ r294823 | rmudgett | 2010-11-11 20:45:22 -0600 (Thu, 11 Nov 2010) | 25 lines Merged revisions 294822 via svnmerge from https://origsvn.digium.com/svn/asterisk/branches/1.6.2 ................ r294822 | rmudgett | 2010-11-11 20:44:12 -0600 (Thu, 11 Nov 2010) | 18 lines Merged revisions 294821 via svnmerge from https://origsvn.digium.com/svn/asterisk/branches/1.4 ........ r294821 | rmudgett | 2010-11-11 20:41:13 -0600 (Thu, 11 Nov 2010) | 11 lines Asterisk is getting a "No D-channels available!" warning message every 4 seconds. Asterisk is just whining too much with this message: "No D-channels available! Using Primary channel XXX as D-channel anyway!". Filtered the message so it only comes out once if there is no D channel available without an intervening D channel available period. (closes issue #17270) Reported by: jmls ........ ................ ................ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@294824 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2010-09-02Merged revisions 284779-284780 via svnmerge from Richard Mudgett
https://origsvn.digium.com/svn/asterisk/branches/1.8 ........ r284779 | rmudgett | 2010-09-02 15:59:12 -0500 (Thu, 02 Sep 2010) | 8 lines Made output libpri event names if pri debugging is enabled when sig_pri processes them. * Simplified CLI "pri debug xx span xx" command code and removed redundant debugging enabled messages. * Made CLI "pri debug xx span xx" command only close the debugging log file if it was opened. ........ r284780 | rmudgett | 2010-09-02 16:02:54 -0500 (Thu, 02 Sep 2010) | 2 lines Simplified pri_dchannel() poll timeout duration code. ........ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@284782 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2010-08-18Merged revisions 282671-282672 via svnmerge from Richard Mudgett
https://origsvn.digium.com/svn/asterisk/branches/1.8 ........ r282671 | rmudgett | 2010-08-18 10:27:51 -0500 (Wed, 18 Aug 2010) | 1 line Use the correct operator when calculating the PRI span devstate. ........ r282672 | rmudgett | 2010-08-18 10:28:27 -0500 (Wed, 18 Aug 2010) | 1 line Use the correct type for aoce_delayhangup bit field. ........ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@282673 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2010-07-23Rename sig_pri_pri to sig_pri_span. More descriptive of concept.Richard Mudgett
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@278942 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2010-06-14Add digit manipulation tag support to chan_dahdi/sig_pri like chan_misdn.Richard Mudgett
Add the append_msn_to_cid_tag option to chan_dahdi like chan_misdn. Review: https://reviewboard.asterisk.org/r/696/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@270219 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2010-06-08Fix some doxygen warnings.Leif Madsen
(closes issue #17336) Reported by: snuffy Patches: doxygen-fixes1.diff uploaded by snuffy (license 35) Tested by: russell git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@268969 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2010-06-07Extract sig_ss7 out of chan_dahdi.Richard Mudgett
Extract the SS7 specific code out of chan_dahdi like what was done to ISDN/PRI and analog signaling. The new SS7 structures were modeled on sig_pri. The changes to sig_pri are an enhancement and a bug fix made possible because SS7 was extracted. 1) The sig_pri TRANSFERCAPABILITY channel variable should have been set unconditionally in sig_pri_new_ast_channel(). 2) SS7/PRI transfer capability interaction in dahdi_new() fixed because of SS7 extraction. 3) Module ref count error in dahdi_new() if startpbx failed to start the PBX for some reason. Review: https://reviewboard.asterisk.org/r/661/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@268774 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2010-06-03Add ETSI Message Waiting Indication (MWI) support.Richard Mudgett
Add the ability to report waiting messages to ISDN endpoints (phones). Relevant specification: EN 300 650 and EN 300 745 Review: https://reviewboard.asterisk.org/r/599/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@267399 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2010-06-02Add ETSI Call Waiting support.Richard Mudgett
Add the ability to announce a call to an endpoint when there are no B channels available. A call waiting call is a SETUP message with no B channel selected. Relevant specification: EN 300 056, EN 300 057, EN 300 058 For DAHDI/ISDN channels, the CHANNEL() dialplan function now supports the "no_media_path" option. * Returns "0" if there is a B channel associated with the call. * Returns "1" if no B channel is associated with the call. The call is either on hold or is a call waiting call. If you are going to allow incoming call waiting calls then you need to use CHANNEL(no_media_path) do determine if you must drop a call to accept the new call. Review: https://reviewboard.asterisk.org/r/568/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@267261 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2010-06-02Generic Advice of Charge.Richard Mudgett
Asterisk Generic AOC Representation - Generic AOC encode/decode routines. (Generic AOC must be encoded to be passed on the wire in the AST_CONTROL_AOC frame) - AST_CONTROL_AOC frame type to represent generic encoded AOC data - Manager events for AOC-S, AOC-D, and AOC-E messages Asterisk App Support - app_dial AOC-S pass-through support on call setup - app_queue AOC-S pass-through support on call setup AOC Unit Tests - AOC Unit Tests for encode/decode routines - AOC Unit Test for manager event representation. SIP AOC Support - Pass-through of generic AOC-D and AOC-E messages to snom phones via the snom AOC specification. - Creation of chan_sip page3 flags for the addition of the new 'snom_aoc_enabled' sip.conf option. IAX AOC Support - Natively supports AOC pass-through through the use of the new AST_CONTROL_AOC frame type DAHDI AOC Support - ETSI PRI full AOC Pass-through support - 'aoc_enable' chan_dahdi.conf option for independently enabling pass-through of AOC-S, AOC-D, AOC-E. - 'aoce_delayhangup' option for retrieving AOC-E on disconnect. - DAHDI A() dial string option for requesting AOC services. example usage: ;requests AOC-S, AOC-D, and AOC-E on call setup exten=>1111,1,Dial(DAHDI/g1/1112/A(s,d,e)) Review: https://reviewboard.asterisk.org/r/552/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@267096 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2010-06-02Add ETSI Explicit Call Transfer (ECT) support.Richard Mudgett
Added ability to send and receive ETSI Explicit Call Transfer (ECT) messages to eliminate tromboned calls. Note: Asterisk already supported initiating the transfer of calls to eliminate tromboned calls to libpri so there was nothing to do for the asterisk portion. Review: https://reviewboard.asterisk.org/r/520/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@266926 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2010-05-04The inalarm flag is not passed up from the sig_analog and sig_pri submodules.Richard Mudgett
The CLI "dahdi show channel" command was not correctly reporting the InAlarm status. The inalarm flag is now consistently passed between chan_dahdi and submodules. git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@261007 65c4cc65-6c06-0410-ace0-fbb531ad65f3
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-04 07:40:36 +0000