Age | Commit message (Collapse) | Author |
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r199138 | dvossel | 2009-06-04 14:00:15 -0500 (Thu, 04 Jun 2009) | 3 lines
Additional updates to AST-2009-001
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@199139 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Iax2 currently does not support native bridging if the timeoutms value is set. We check for that in iax2_bridge, but then set timeoutms to 0 by default. If the timeoutms is not provided it is set to -1. By setting timeoutms to 0 it is processed causing a bridging retry loop.
(closes issue #15216)
Reported by: oxymoron
Tested by: dvossel
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@198824 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
should be specified.
(closes issue #14367)
Reported by: Nick_Lewis
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@198791 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@198729 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
When connected line updates are received or generated in the middle
of an application call, it is now possible to execute a macro to
manipulate the connected line data. This way, phone numbers may be
manipulated to be more presentable to users, names may be changed
for...whatever reason, or whatever else needs to be done may be.
Review: https://reviewboard.asterisk.org/r/256
AST-165
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@198727 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Oh, and this fixes a deadlock I was seeing.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@198529 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@198511 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Since AgentCallbackLogin has been removed, this should not be documented
any more.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@198500 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
outgoing SIP NOTIFY messages.
(closes issue #15239)
Reported by: pj
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@198498 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
present.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@198248 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This code was there because of the AgentCallbackLogin() application.
->loginchan[] member was only used by AgentCallbackLogin().
Agent where dumped to astdb if they where logged in using AgentCallbacklogin()
so they are not being dumper anymore.
Review: https://reviewboard.asterisk.org/r/267/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@198217 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This branch splits all the analog signaling logic out of chan_dahdi.c into
sig_analog.c. Functionality in theory should not change at all. As noted
in the code, there is still some unused code remaining that will be cleaned
up in a later commit.
Review: https://reviewboard.asterisk.org/r/253/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@198088 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
should have.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@197996 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
* Set the invitestate to INV_CALLING when we send a connected line reinvite.
This prevents us from potentially rapid-firing reinvites to a single peer.
* Use the astdb to store a peer's allowed methods. This prevents us from sending
an UPDATE during the interval between startup and the peer's first registration
if the peer does not support the UPDATE method.
* Handle Polycom's method of indicating allowed methods in REGISTER. Instead of
using an Allow header, they place the allowed methods in a methods= parameter
in the Contact header.
ABE-1873
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@197959 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@197824 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This makes sure that we mark a method as being unallowed if we
receive a 405 response so that we don't continue to try to
send that same type of message.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@197740 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@197701 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
1240 on load but was on reload.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@197697 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r197562 | eliel | 2009-05-28 11:21:32 -0400 (Thu, 28 May 2009) | 13 lines
Use the address we already know when reloading a peer with nat=yes.
If we already have an address for a peer, and we are reloading the sip
configuration, try to use that address to contact the peer, instead of
getting it from the Contact.
(closes issue #15194)
Reported by: ibc
Patches:
sip.patch uploaded by eliel (license 64)
Tested by: manwe
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@197621 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
(closes issue #14833)
Reported by: contactmayankjain
Patches:
all_changes.patch uploaded by contactmayankjain (license 740)
slightly modified by me
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@197616 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r197466 | file | 2009-05-28 10:44:58 -0300 (Thu, 28 May 2009) | 8 lines
Fix a bug where the flag indicating the presence of rport would get overwritten by the nat setting.
The presence of rport is now stored as a separate flag. Once the dialog is setup and authenticated
(or it passes through unauthenticated) the proper nat flag is set.
(closes issue #13823)
Reported by: dimas
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@197467 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Previously they always set hangupcause 0, which is generally wrong. With this
change, we're setting some generic hangup causes. For 5xx errors, which indicate
some sort of problem with the remote server, we're now setting CONGESTION.
EDVX002
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@197266 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
or inaccessible configuration file.
Before this change, when chan_alsa failed to load due to a missing or
inaccessible configuration file, no message would be displayed. With this
change, when chan_alsa fails to load due to a missing or inaccessible
configuration file, a message will be displayed.
(closes issue #14760)
Reported by: Nick_Lewis
Patches:
chan_alsa.c-confload.patch uploaded by Nick (license 657)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@196988 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@196893 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
the peer.
(closes issue #15118)
Reported by: alecdavis
Patches:
chan_sip_unregister.diff2.txt uploaded by alecdavis (license 585)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@196721 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@196456 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
In sip.conf the transport option allows for the configuration of what transport types (udp, tcp, and tls) a peer will accept, but only the first type listed was used for outbound connections. This patch changes this. Now the default transport type is only used until the peer registers. When registration takes place the transport type is parsed out of the Contact header. If the Contact header's transport type is equal to one that the peer supports, the peer's default transport type for outbound connections is set to match the Contact header's type. If the Contact header's transport type is not present, then the peer's default transport type is set to match the one the peer registered with. When a peer unregisters or the registration expires, the default transport type for that peer is reset.
(closes issue #12282)
Reported by: rjain
Patches:
reg_patch_1.diff uploaded by dvossel (license 671)
Tested by: dvossel
(closes issue #14727)
Reported by: pj
Patches:
reg_patch_3.diff uploaded by dvossel (license 671)
Tested by: pj, dvossel
Review: https://reviewboard.asterisk.org/r/249/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@196416 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
invalid bindaddr was specified in gtalk.conf.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@196381 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
A new xml element was created to manage the AMI actions documentation,
using AstXML.
To register a manager action using XML documentation it is now possible
using ast_manager_register_xml().
The CLI command 'manager show command' can be used to show the parsed
documentation.
Example manager xml documentation:
<manager name="ami action name" language="en_US">
<synopsis>
AMI action synopsis.
</synopsis>
<syntax>
<xi:include xpointer="xpointer(...)" /> <-- for ActionID
<parameter name="header1" required="true">
<para>Description</para>
</parameter>
...
</syntax>
<description>
<para>AMI action description</para>
</description>
<see-also>
...
</see-also>
</manager>
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@196308 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@196268 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@196246 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
a result of the const-ify the world patch.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@196227 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@196187 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r196116 | file | 2009-05-22 10:54:17 -0300 (Fri, 22 May 2009) | 5 lines
Fix a bug where using immediate with mISDN caused a cause code of 16 to get sent back instead of 1 if the 's' extension did not exist.
(closes issue #12286)
Reported by: lmamane
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@196117 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This patch adds 'const' tags to a number of Asterisk APIs where they are appropriate (where the API already demanded that the function argument not be modified, but the compiler was not informed of that fact). The list includes:
- CLI command handlers
- CLI command handler arguments
- AGI command handlers
- AGI command handler arguments
- Dialplan application handler arguments
- Speech engine API function arguments
In addition, various file-scope and function-scope constant arrays got 'const' and/or 'static' qualifiers where they were missing.
Review: https://reviewboard.asterisk.org/r/251/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@196072 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r195991 | dvossel | 2009-05-21 14:04:56 -0500 (Thu, 21 May 2009) | 14 lines
Sign problem calculating timestamp for iax frame leads to no audio on the receiving peer.
There are rare cases in which a frame's delivery timestamp is slightly less than the iax2_pvt's offset. This causes the pvt's timestamp to be a small negative number, but since the timestamp value is unsigned it looks like a huge positive number. This patch checks for this negative case and sets the ms to zero. A similar check is already done right below this one in the 'else' statement.
(closes issue #15032)
Reported by: guillecabeza
Patches:
chan_iax2.c.patch_timestamp uploaded by guillecabeza (license 380)
Tested by: guillecabeza
(closes issue #14216)
Reported by: Andrey Sofronov
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@195995 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
When receiving a 200 OK response to an INVITE, it was possible to transmit two
connected line updates instead of a single one. Furthermore, the second did not
have the proper information present.
Now the two have been combined into a single update and the correct information
is presented.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@195798 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
SIP purists may want to look the other way...
When COLP/CONP support for SIP was committed, there was a condition under
which Asterisk may transmit a SIP UPDATE in order to communicate the change
in connected line information. The issue here is that while we could send a
SIP UPDATE message, we were not prepared to receive such an UPDATE and would
always responde with a 501 when we received an UPDATE.
The situation was a bit rough. We really want to be able to receive UPDATEs
having to do with connected line changes, but the amount of effort involved
in properly supporting RFC 3311 was staggering. This commit represents a
compromise.
First, it was decided that it is important to only send a SIP UPDATE to
an endpoint that is able to handle one. So, now we have added parsing of
the Allow header into SIP. We store the allowed methods on SIP peers so
that when we communicate with them, we already will know what we can and
cannot send to them. We will parse the peer's allowed methods when he registers
with us. If the peer is not the type to register with us, but the qualify option
is enabled, then we will use the response to the OPTIONS request we send
the peer to determine the peer's allowed methods. When the peer's registration
expires, or when qualify deems the peer to be unreachable, we clear the allowed
methods from the peer.
For an actual call, we will copy the peer's allowed methods to the sip_pvt
representing the call leg. If we are communicating with an endpoint which is
not a peer, then we will just parse the Allow header from the first message
we receive during the call and store the information in the sip_pvt.
If, during communication with a peer, we receive a 501 response, then we will
make sure to save the fact that we cannot use that method when communicating
with that peer.
Now, with all that infrastructure in place, the only actual place we use this
information currently is when attempting to send a connected line change using
an UPDATE request. If we cannot send the change immediately using an UPDATE,
we will set the SIP_NEEDREINVITE flag so that we can send a REINVITE as soon
as it is allowed.
The second part of the changes here is for Asterisk to accept UPDATE requests
that have connected line changes. Since we are not fully supporting RFC 3311,
Asterisk will NOT place the UPDATE method in Allow headers it sends. Instead,
if you are communicating with what you know to be another Asterisk box, you may
set the rpid_update parameter in sip.conf so that we will send UPDATEs to that
Asterisk box. When we send a connected line update, we set a custom header
called "X-Asterisk-rpid-update."
On the receiving end, if Asterisk receives an UPDATE that does not have the
"X-Asterisk-rpid-update" header present, then Asterisk will respond with a 501
since media-changing UPDATEs are not supported. We should never get such
UPDATEs, since as was stated earlier, Asterisk does not put UPDATE in its Allow
header. If the custom header is present in the received UPDATE, though, then we
will check the incoming request for connected line updates and queue the update
on the channel where the change occurred.
ABE-1840
ABE-1822
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@195589 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r195448 | file | 2009-05-19 11:41:45 -0300 (Tue, 19 May 2009) | 7 lines
Fix a bug where direct RTP setup would partially occur even when disabled if the calling channel was answered.
(issue #13545)
Reported by: davidw
(issue #14244)
Reported by: mbnwa
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@195449 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
parameters.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@195266 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
sent to ourself.
(closes issue #15106)
Reported by: timeshell
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@195089 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r194873 | dvossel | 2009-05-15 17:43:13 -0500 (Fri, 15 May 2009) | 17 lines
IAX2 REGAUTH loop
IAX was not sending REGREJ to terminate invalid registrations. Instead it sent another REGAUTH if the authentication challenge failed. This caused a loop of REGREQ and REGAUTH frames.
(Related to Security fix AST-2009-001)
(closes issue #14867)
Reported by: aragon
Tested by: dvossel
(closes issue #14717)
Reported by: mobeck
Patches:
regauth_loop_update_patch.diff uploaded by dvossel (license 671)
Tested by: dvossel
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@194874 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r194557 | dvossel | 2009-05-14 17:59:43 -0500 (Thu, 14 May 2009) | 10 lines
IAX2 "Ghost" Channels
There is a bug tracker issue where people are reporting "Ghost" channels in their 'iax2 show channels' output. The confusion is caused by channels being listed as "(NONE)" with format "unknown". These are not channels of coarse. They are usually just pending registration or poke requests, but it is confusing output. To help make sense of this I have added two columns to 'iax2 show channels'. One shows the first message which started the transaction, and the second shows the last message sent by either side of the call. This helps diagnose why the entry exists and why it may not go away.
(closes issue #14207)
Reported by: clive18
Review: https://reviewboard.asterisk.org/r/246/
........
r194685 | dvossel | 2009-05-15 10:40:37 -0500 (Fri, 15 May 2009) | 6 lines
Update to previous IAX2 "Ghost" Channels patch.
Fixed some comments made on reviewboard for the previous patch.
(issue #14207)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@194833 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r194484 | mmichelson | 2009-05-14 17:17:55 -0500 (Thu, 14 May 2009) | 24 lines
Fix a race condition where a reinvite could trigger a 482 response.
The loop detection/spiral detection code in chan_sip used the owner
channel's state as a criterion for determining if the incoming INVITE
is a looped request. The problem with this is that the INVITE-handling
code happens in a different thread than the thread that marks the owner
channel as being up. As a result, if a reinvite were to come in very quickly,
say from another Asterisk on the same LAN, it was possible for the reinvite
to arrive before the owner channel had been set to the up state.
This patch corrects the problem by using the invitestate of the sip_pvt
instead, since that can be guaranteed to be set correctly by the time
the reinvite arrives. Since there is a switch statement further in the
INVITE-handling code, the AST_STATE_RINGING state also checks the invitestate
of the sip_pvt in case we should actually be treating the channel as if it were
up already.
(closes issue #12215)
Reported by: jpyle
Patches:
12215_confirmed.patch uploaded by mmichelson (license 60)
Tested by: lmadsen
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@194496 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Select what to do with outgoing COLP information on this port.
0 - Send out COLP information unaltered. (default)
1 - Force COLP to restricted on all outgoing COLP information.
2 - Do not send COLP information.
outgoing_colp=0
Also fixed sending the EctInform message so it always has the
required redirectionNumber parameter when the status is active.
JIRA ABE-1853
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@194479 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
In 1.4, a SIP spiral is treated the same way as a call forward. This
works much better than what is currently in trunk and 1.6.X. The code
in trunk and 1.6.X did not create a new call to the recipient of the spiral,
instead trying to continue the same call. In addition to just being plain
wrong, this also had the side effect of only being able to spiral calls
to other SIP channels.
With this in place, as long as call forwards are honored, SIP spirals
will work properly. This means that it will work for outbound calls
made by the Queue, Dial, and Page applications. For originated calls and
spool calls, however, the spiral will not work properly until a generic
call forward mechanism is introduced into Asterisk.
(relates to issue #13630)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@193954 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@193832 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r193613 | rmudgett | 2009-05-11 14:09:00 -0500 (Mon, 11 May 2009) | 12 lines
Sent wrong message to clear a call we started if the other end has not responed yet.
In the state MISDN_CALLING (i.e. SETUP was sent but no answer has arrived yet),
it is not allowed to clear the call with RELEASE_COMPLETE. It must be
cleared with DISCONNECT. A RELEASE_COMPLETE is only allowed as an answer
to a SETUP. (See Q.931 ch. 5.3.2, 5.3.2.a, 5.3.2.b)
Patches:
chan-misdn-ccstate7.patch uploaded by customer.
JIRA ABE-1862
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@193614 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
find_peer() does not find a valid peer when using pvt->recv as the sockaddr_in argument. Because of the way TCP works, the port number in pvt->recv is not what we're looking for at all. There is currently only one place that find_peer searches for a peer using the sockaddr_in argument. If the peer is not found after using pvt->recv (works for UDP since the port number will be correct), a temp sockaddr_in struct is made using the Contact header in the sip_request. This has the correct port number in it.
Review: http://reviewboard.digium.com/r/236/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@193387 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r193262 | dvossel | 2009-05-08 09:51:09 -0500 (Fri, 08 May 2009) | 9 lines
"misdn show config" segfaults asterisk, if no MSN lists
(closes issue #14976)
Reported by: alecdavis
Patches:
misdn_config.diff.txt uploaded by alecdavis (license 585)
Tested by: alecdavis, FabienToune
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@193263 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|