Age | Commit message (Collapse) | Author |
|
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r286426 | rmudgett | 2010-09-13 10:52:14 -0500 (Mon, 13 Sep 2010) | 1 line
Update chan_dahdi.conf.sample to reflect new libpri T309 default value.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@286427 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
FXS lines normally connect to a telephone. However, when FXS lines are routed
to an external PBX or Key System to act as "external" or "CO" lines, it is
extremely difficult, if not impossible for the external PBX to know when
the call has been disconnected without receiving a polarity reversal on the line.
Now using answeronpolarityswitch and hanguponpolarityswitch keywords that
previously were used only for FXO ports, now applies like functionality for
an FXS port, but from the connected equipment's point of view.
(closes issue #17318)
Reported by: armeniki
Patches:
fxs_linepolarity.diff5.txt uploaded by alecdavis (license 585)
Tested by: alecdavis
Review: https://reviewboard.asterisk.org/r/797/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@278809 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Add the append_msn_to_cid_tag option to chan_dahdi like chan_misdn.
Review: https://reviewboard.asterisk.org/r/696/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@270219 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
* chan_dahdi supports dialing configuring and dialing by device file name.
DAHDI/span-name!local!1 will use /dev/dahdi/span-name/local/1 . Likewise
it may appear in chan_dahdi.conf as 'channel => span-name!local!1'.
* A new options for chan_dahdi.conf: 'ignore_failed_channels'. Boolean.
False by default. If set, chan_dahdi will ignore failed 'channel' entries.
Handy for the above name-based syntax as it does not depend on
initialization order.
* have my_pri_make_cc_dialstring() only manupulate dial-strings of group
(gGrR) dialing, which make it lsightly more complicated.
https://reviewboard.asterisk.org/r/535/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@269238 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Add the ability to report waiting messages to ISDN endpoints (phones).
Relevant specification: EN 300 650 and EN 300 745
Review: https://reviewboard.asterisk.org/r/599/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@267399 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Add the ability to announce a call to an endpoint when there are no B
channels available. A call waiting call is a SETUP message with no B
channel selected.
Relevant specification: EN 300 056, EN 300 057, EN 300 058
For DAHDI/ISDN channels, the CHANNEL() dialplan function now supports the
"no_media_path" option.
* Returns "0" if there is a B channel associated with the call.
* Returns "1" if no B channel is associated with the call. The call is
either on hold or is a call waiting call.
If you are going to allow incoming call waiting calls then you need to use
CHANNEL(no_media_path) do determine if you must drop a call to accept the
new call.
Review: https://reviewboard.asterisk.org/r/568/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@267261 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Asterisk Generic AOC Representation
- Generic AOC encode/decode routines.
(Generic AOC must be encoded to be passed on the wire in the AST_CONTROL_AOC frame)
- AST_CONTROL_AOC frame type to represent generic encoded AOC data
- Manager events for AOC-S, AOC-D, and AOC-E messages
Asterisk App Support
- app_dial AOC-S pass-through support on call setup
- app_queue AOC-S pass-through support on call setup
AOC Unit Tests
- AOC Unit Tests for encode/decode routines
- AOC Unit Test for manager event representation.
SIP AOC Support
- Pass-through of generic AOC-D and AOC-E messages to snom phones via the
snom AOC specification.
- Creation of chan_sip page3 flags for the addition of the new
'snom_aoc_enabled' sip.conf option.
IAX AOC Support
- Natively supports AOC pass-through through the use of the new
AST_CONTROL_AOC frame type
DAHDI AOC Support
- ETSI PRI full AOC Pass-through support
- 'aoc_enable' chan_dahdi.conf option for independently enabling
pass-through of AOC-S, AOC-D, AOC-E.
- 'aoce_delayhangup' option for retrieving AOC-E on disconnect.
- DAHDI A() dial string option for requesting AOC services.
example usage:
;requests AOC-S, AOC-D, and AOC-E on call setup
exten=>1111,1,Dial(DAHDI/g1/1112/A(s,d,e))
Review: https://reviewboard.asterisk.org/r/552/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@267096 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Added ability to send and receive ETSI Explicit Call Transfer (ECT)
messages to eliminate tromboned calls.
Note: Asterisk already supported initiating the transfer of calls to
eliminate tromboned calls to libpri so there was nothing to do for the
asterisk portion.
Review: https://reviewboard.asterisk.org/r/520/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@266926 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r259270 | rmudgett | 2010-04-27 13:14:54 -0500 (Tue, 27 Apr 2010) | 14 lines
hidecalleridname parameter in chan_dahdi.conf
Issue #7321 implements a new chan_dahdi configuration option. However, a
change mentioned in the issue was never implemented. This is the change
that will allow the feature to work.
I added a note to chan_dahdi.conf.sample about the feature.
(closes issue #17143)
Reported by: djensen99
Patches:
diff.txt uploaded by djensen99 (license NA) (One line change)
Tested by: djensen99
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@259307 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
From Reviewboard:
CCSS stands for Call Completion Supplementary Services. An admittedly out-of-date
overview of the architecture can be found in the file doc/CCSS_architecture.pdf
in the CCSS branch. Off the top of my head, the big differences between what is
implemented and what is in the document are as follows:
1. We did not end up modifying the Hangup application at all.
2. The document states that a single call completion monitor may be used across
multiple calls to the same device. This proved to not be such a good idea
when implementing protocol-specific monitors, and so we ended up using one
monitor per-device per-call.
3. There are some configuration options which were conceived after the document
was written. These are documented in the ccss.conf.sample that is on this
review request.
For some basic understanding of terminology used throughout this code, see the
ccss.tex document that is on this review.
This implements CCBS and CCNR in several flavors.
First up is a "generic" implementation, which can work over any channel technology
provided that the channel technology can accurately report device state. Call
completion is requested using the dialplan application CallCompletionRequest and can
be canceled using CallCompletionCancel. Device state subscriptions are used in order
to monitor the state of called parties.
Next, there is a SIP-specific implementation of call completion. This method uses the
methods outlined in draft-ietf-bliss-call-completion-06 to implement call completion
using SIP signaling. There are a few things to note here:
* The agent/monitor terminology used throughout Asterisk sometimes is the reverse of
what is defined in the referenced draft.
* Implementation of the draft required support for SIP PUBLISH. I attempted to write
this in a generic-enough fashion such that if someone were to want to write PUBLISH
support for other event packages, such as dialog-state or presence, most of the effort
would be in writing callbacks specific to the event package.
* A subportion of supporting PUBLISH reception was that we had to implement a PIDF
parser. The PIDF support added is a bit minimal. I first wrote a validation
routine to ensure that the PIDF document is formatted properly. The rest of the
PIDF reading is done in-line in the call-completion-specific PUBLISH-handling
code. In other words, while there is PIDF support here, it is not in any state
where it could easily be applied to other event packages as is.
Finally, there are a variety of ISDN-related call completion protocols supported. These
were written by Richard Mudgett, and as such I can't really say much about their
implementation. There are notes in the CHANGES file that indicate the ISDN protocols
over which call completion is supported.
Review: https://reviewboard.asterisk.org/r/523
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@256528 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
New config parameter "reportalarms" added in chan_dahdi.conf which supports the
following possible values:
"channels": report each channel alarms (current behavior, default for backward compatibility)
"spans": report an "SpanAlarm" event when the span of any configured channel is alarmed
"all": report channel and span alarms (aggregated behavior)
"none": do not report any alarms
(closes issue #16709)
Reported by: nahuelgreco
Patches:
chan_dahdi.c.reportalarms.patch uploaded by nahuelgreco (license 162)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@250392 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
When configuring the adaptive jitterbuffer, the target_extra
value not only could not be set from the configuration, but was
not even being set to its proper default. This value is required
in order for the adaptive jitterbuffer to work correctly. To resolve
this a config option has been added to expose this value to the conf
files, and a default value is provided when no config specific value
is present.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@249893 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
* Added handling of received HOLD/RETRIEVE messages and the optional ability
to transfer a held call on disconnect similar to an analog phone.
* Added CallRerouting/CallDeflection support for Q.SIG, ETSI PTP, ETSI PTMP.
Will reroute/deflect an outgoing call when receive the message.
Can use the DAHDISendCallreroutingFacility to send the message for the
supported switches.
* Added ability to send/receive keypad digits in the SETUP message.
Send keypad digits in SETUP message: Dial(DAHDI/g1[/K<keypad_digits>][/extension])
Access any received keypad digits in SETUP message by: ${CHANNEL(keypad_digits)}
* Added support for BRI PTMP NT mode.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@225692 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
(closes issue AST-29)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@224637 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Explains new options for detecting DTMF CID on fxo lines
(issue #9096)
Reported by: fleed
Patches:
chan_dahid_sample_config.patch uploaded by sum (license 766)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@224144 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
ISDN PTMP CPE spans.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@215757 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@214272 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@207095 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@206603 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This is a continuation of revision 885 to LibPRI (Capture and expose the Reverse
Charging Indication IE on ISDN PRI) which added the ability to get/set Reverse
Charging Indication in LibPRI. This patch adds the ability to specify RCI on
the outbound leg of a PRI call from within Asterisk, by prefixing the dialed
number with a capital 'C' like:
...,Dial(DAHDI/g1/C4445556666)
And to read it off an inbound channel:
exten => s,1,Set(RCI=${CHANNEL(reversecharge)})
Thanks again to rmudgett for the thorough review.
(closes issue #13760)
Reported by: mrgabu
Review: https://reviewboard.asterisk.org/r/303/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@204749 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
GR-303.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@203402 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
the new skip category feature unless supported
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@200799 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
realize this was never done but was working anyways
also added support for skip category request feature of openr2 and updated chan_dahdi.conf.sample
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@200477 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Let's try that again, this time removing trailing whitespace and not leading
whitespace. I can't believe no one noticed.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@197535 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@197528 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
the sample configuration files.
(closes issue #15207)
Reported by: seandarcy
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@197089 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This is the companion commit to libpri r732. Service messages are now supported
for switch types 4ess/5ess. A new option service_message_support has been added
to chan_dahdi.conf and is noted in the sample config file. The service message
support is turned off by default. The current implementation relies on AstDB
to keep track of channel state, which allows the statuses to be preserved
across Asterisk restarts. Below is a description of the storage format.
The state and reason for the service state are in the form <state>:<reason>,
where:
<state> ::= { 'O' } // 'O' – Out Of Service
<reason> ::= { '0' | '1' | '2' | '3' }, where:
'0' – No reason (backwards compatibility)
'1' – NEAR END
'2' – FAR END
'3' – both NEAR and FAR END
The new CLI commands to handle channel service state are:
pri service disable channel <chan>
pri service enable channel <chan>
Many people contributed to the development of this functionality. Because I
entered at the very end I do not know the exact history. Special thanks to
all who moved the bug forward one way or another:
cmaj, PCadach, markster, mattf, drmac, MikeJ, serge-v, murf, kanelbullar, Seb7,
tilghman, lmadsen, and especially dhubbard (he answered lots of my questions
and did a large portion of the work)
(closes issue #3450)
Reported by: cmaj
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@188342 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This commit introduces official support for R2 signaling in chan_dahdi. The
modifications to chan_dahdi, and the supporting library, LibOpenR2, were both
written by Moises Silva.
Many users are using this code, or a variant of it, in Asterisk 1.2, 1.4 and 1.6
in Brazil, México and Argentina. An unknown number of users (but at least 1)
are using it in each of the following countries: Colombia, Nepal, Thailand,
Venezuela, Perú, and probably others.
To use this code, LibOpenR2 must be installed from http://www.libopenr2.org/.
Information about configuration can be found in configs/chan_dahdi.conf.sample.
The code committed is the most up to date version, which was being maintained
in svn/asterisk/team/moy/mfcr2/.
I would also like to include a Thank You to the many others that tested this
code beyond those listed in this commit message. These are the names that I
could find in the mantis issue.
(closes issue #12509)
Reported by: moy
Patches:
chan_zap-mfr2.patch uploaded by moy (license 222)
Tested by: moy, korihor, viniciusfontes, Skarmeth, loloski, asbestoshead, titogarrido, heliocoelhojr, konsultex, ncorrare, ecarruda, rtorresduque, PTorres, ychen
Review: http://reviewboard.digium.com/r/40/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@182355 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
When the 'faxdetect' configuration option is used, one may also want to use
the 'faxbuffers' configuration option in chan_dahdi.conf. This option will
dynamically use the configured 'faxbuffers' buffer policy on a channel for
the life of the call following the detection of fax tones. The faxbuffers
buffer policy will be reverted during call teardown.
An example use of 'faxbuffers' is below. This example would switch to using
6 buffers with a full buffer policy.
faxbuffers=>6,full
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@175411 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
* Added doxygen comments to the major dahdi structures.
* Fixed PRI and SS7 using an incorrect string value if the extension
delimiter is not present in the Dial() function.
* Fixed SS7 not checking if the dialed extension is at least as long
as the stripmsd option.
* Fixed PRI not handling unknown TON/NPI prefix letters correctly.
* Fixed some uninitialized string variables on FXS ports.
configs/chan_dahdi.conf.sample
* Updated some documentation.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@172400 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
ability.
(closes issue #14104)
Reported by: alecdavis
Patches:
asttrunk-14104.diff2.txt uploaded by dbailey (license )
chan_dahdi.rpas_and_fsk.diff.txt uploaded by alecdavis (license 585)
Tested by: alecdavis, dbailey
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@169277 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This prevents the situation when MWI messages are added to caller ID spills causing the channel to be hung up
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@169153 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
until the originating line hangs up.
(closes issue #12382)
Reported by: one47
Patches:
zap-waitfordialtone-trunk.080901.patch uploaded by one47 (license 23)
zap-waitfordialtone-bra-1.4.21.2.patch uploaded by fleed (license 463)
Tested by: fleed
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@159317 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@155671 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@155637 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
option for discard of remote hold messages, and using the alternate logical channel mapping in Q.SIG instead of the default physical channel mapping.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@150640 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r135536 | russell | 2008-08-04 15:15:03 -0500 (Mon, 04 Aug 2008) | 2 lines
fix a config sample typo
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@135537 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r135473 | russell | 2008-08-04 11:26:17 -0500 (Mon, 04 Aug 2008) | 2 lines
Add a minor clarification to the documentation of mohinterpret and mohsuggest
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@135474 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
driver into a common place for multiple channel drivers.
(closes issue #13152)
Reported by: caio1982
Patches:
atxfer_complete_sound3.diff uploaded by caio1982 (license 22)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@134401 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@134086 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r132641 | kpfleming | 2008-07-22 14:49:11 -0500 (Tue, 22 Jul 2008) | 2 lines
use renamed libpri API call for controlling this feature (was improperly named before)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@132643 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r130039 | kpfleming | 2008-07-11 10:41:56 -0500 (Fri, 11 Jul 2008) | 4 lines
add support for a configuration parameter for 'inband audio during RELEASE', which is currently mandatory in libpri-1.4.4 but will become configurable in libpri-1.4.5 later today
(related to issue #13042)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@130040 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
application in the dialplan. Also minor documentation update explaining how to setup multiple signalling links within a linkset
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@128122 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@126675 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|