| Age | Commit message (Collapse) | Author |
|---|
|
|
|
This adds support for parsing timelen values from config files. This
includes support for all flags which apply to PARSE_INT32. Support for
this parser is added to ACO via the OPT_TIMELEN_T option type.
Fixes an issue where extra characters provided to ast_app_parse_timelen
were ignored, they now cause an error.
Testing is included.
ASTERISK-27117 #close
Change-Id: I6b333feca7e3f83b4ef5bf2636fc0fd613742554
|
|
ASTERISK-27127 #close
Reported by: HZMI8gkCvPpom0tM
Change-Id: I2b0c54570d58156e37166ac536728af3b6c01789
|
|
By default, when res_musiconhold reloads or unloads, it sends a HUP
signal to custom applications (and all descendants), waits 100ms,
then sends a TERM signal, waits 100ms, then finally sends a KILL
signal. An application which is interacting with an external
device and/or spawns children of its own may not be able to exit
cleanly in the default times, expecially if sent a KILL signal, or
if it's children are getting signals directly from
res_musiconhoild.
* To allow extra time, the 'kill_escalation_delay'
class option can be used to set the number of milliseconds
res_musiconhold waits before escalating kill signals, with the
default being the current 100ms.
* To control to whom the signals are sent, the "kill_method" class
option can be set to "process_group" (the default, existing
behavior), which sends signals to the application and its
descendants directly, or "process" which sends signals only to the
application itself.
Change-Id: Iff70a1a9405685a9021a68416830c0db5158603b
|
|
|
|
When connected_line_method is "invite", we're supposed to determine
if the client can support UPDATE and if it can, send UPDATE instead
of INVITE to avoid the SDP renegotiation. Not only was pjproject
not setting the PJSIP_INV_SUPPORT_UPDATE flag, we were testing
that invite_tsx wasn't NULL which isn't always the case.
* Updated chan_pjsip/update_connected_line_information to drop the
requirement that invite_tsx isn't NULL.
* Submitted patch to pjproject sip_inv.c that sets the
PJSIP_INV_SUPPORT_UPDATE flag correctly.
* Updated pjsip.conf.sample to clarify what happens when "invite"
is specified.
ASTERISK-27095
Change-Id: Ic2381b3567b8052c616d96fbe79564c530e81560
|
|
|
|
Change-Id: I7a610bef369924523a445c7e849ee88cc45dc5df
|
|
A new global option "imap_poll_logout" was added to specify whether need to
disconnect from the IMAP server after polling of mailboxes.
ASTERISK-27068 #close
Closing IMAP connection after loading mailbox from voicemail.conf
ASTERISK-24052 #close
Change-Id: Ib7558ba04516240a32b65f42e9be64372a0ae12a
|
|
|
|
This option was added to control whether to notify dialog-info state
'early' or 'confirmed' on Ringing when already INUSE.
The value "yes" is useful for some SIP phones (Cisco SPA)
to be able to indicate and pick up ringing devices.
ASTERISK-26919 #close
Change-Id: Ie050bc30023543c7dfb4365c5be3ce58c738c711
|
|
Reported by Sylvain Boily via asterisk-dev mailing list.
Change-Id: Idc7623f335aea3e144dd369ba383b9a757480a9d
|
|
|
|
ASTERISK-25101 #close
Change-Id: I09a97793e5577b4422d0ae883fadb3f0d86725cc
|
|
Change-Id: Ie1c2d83af66f27a449da09a68d987e0992627fee
|
|
This option was added to turn off notifying the progress details
on Blind Transfer. If this option is not set then the chan_pjsip
will send NOTIFY "200 OK" immediately after "202 Accepted".
Some SIP phones like Mitel/Aastra or Snom keep the line busy until
receive "200 OK".
ASTERISK-26333 #close
Change-Id: Id606fbff2e02e967c02138457badc399144720f2
|
|
|
|
This change adds the required logic to allow the SIP
Call-ID to be placed into the HEP RTCP traffic if the
chan_sip module is used. In cases where the option is
enabled but the channel is not either SIP or PJSIP then
the code will fallback to the channel name as done
previously.
Based on the change on Nir's branch at:
team/nirs/hep-chan-sip-support
ASTERISK-26427
Change-Id: I09ffa5f6e2fdfd99ee999650ba4e0a7aad6dc40d
|
|
All log messages go to a queue serviced by a single thread
which does all the IO. This setting controls how big that
queue can get (and therefore how much memory is allocated)
before new messages are discarded. The default is 1000.
Should something go bezerk and log tons of messages in a tight
loop, this will prevent memory escalation.
When the limit is reached, a WARNING is logged to that effect
and messages are discarded until the queue is empty again. At
that time another WARNING will be logged with the count of
discarded messages. There's no "low water mark" for this queue
because the logger thread empties the entire queue and processes it
in 1 batch before going back and waiting on the queue again.
Implementing a low water mark would mean additional locking as
the thread processes each message and it's not worth it.
A "test" was added to test_logger.c but since the outcome is
non-deterministic, it's really just a cli command, not a unit
test.
Change-Id: Ib4520c95e1ca5325dbf584c7989ce391649836d1
|
|
Added the stun_blacklist option to rtp.conf. Some multihomed servers have
IP interfaces that cannot reach the STUN server specified by stunaddr.
Blacklist those interface subnets from trying to send a STUN packet to
find the external IP address. Attempting to send the STUN packet
needlessly delays processing incoming and outgoing SIP INVITEs because we
will wait for a response that can never come until we give up on the
response. Multiple subnets may be listed.
ASTERISK-26890 #close
Change-Id: I3ff4f729e787f00c3e6e670fe6435acce38be342
|
|
This include was accidentally removed in changeset
Ia79aea64de89531362e993e34230c2044a70aa93. My bad.
Change-Id: I1d716c7f9590b4e97909fb8bca1f2ed9bd0e4082
|
|
|
|
|
|
This change adds database tables for the PUBLISH support so it
can be configured using realtime. A minor fix to the
res_pjsip_publish_asterisk module was done so that it read the
sorcery configuration from the correct section. Finally the
sample configuration files have been updated.
ASTERISK-26928
Change-Id: I81991ae5c75af98d247f7eacd1c0b0a763675952
|
|
Added:
* outbound-publish
* resource_list
* inbound-publication
* asterisk-publication
Change-Id: I65043a896c35483f30a92d30b5b118359af7ba5a
|
|
This takes care of warnings by ossobv/asterisklint.
Change-Id: Ia79aea64de89531362e993e34230c2044a70aa93
|
|
config" into 13
|
|
Two new parameters have been added to the pjsip config wizard.
* Setting 'sends_line_with_registrations' to true will cause the wizard
to skip the creation of an identify object to match incoming request
to the endpoint and instead add the line and endpoint parameters to
the outbound registration object.
* Setting 'outbound_proxy' is a shortcut for adding individual
endpoint/outbound_proxy, aor/outbound_proxy and
registration/outbound_proxy parameters.
Change-Id: I678e5f80765734c056620528a6d40d82736ceeb0
|
|
ASTERISK-26086 #close
Reported by: Jens Bürger
Change-Id: I6aab666c0bf01fd0c64d7a5bcb22fa7f5d41335e
|
|
Support for RFC3578 overlap dialling (i.e. 484 Response to partially matched
destinations) as currently provided by chan_sip is missing from res_pjsip.
This patch adds a new endpoint attribute (allow_overlap) [defaults to yes]
which when set to yes enables 484 responses to partial destination
matches rather than the current 404.
ASTERISK-26864
Change-Id: Iea444da3ee7c7d4f1fde1d01d138a3d7b0fe40f6
|
|
ASTERISK-26846 #close
Change-Id: I541a1602ff55ab73684e9f8002edb9e0e745d639
|
|
A new transport parameter 'symmetric_transport' has been added.
When a request from a dynamic contact comes in on a transport with
this option set to 'yes', the transport name will be saved and used
for subsequent outgoing requests like OPTIONS, NOTIFY and INVITE.
It's saved as a contact uri parameter named 'x-ast-txp' and will
display with the contact uri in CLI, AMI, and ARI output. On the
outgoing request, if a transport wasn't explicitly set on the
endpoint AND the request URI is not a hostname, the saved transport
will be used and the 'x-ast-txp' parameter stripped from the
outgoing packet.
* config_transport was modified to accept and store the new parameter.
* config_transport/transport_apply was updated to store the transport
name in the pjsip_transport->info field using the pjsip_transport->pool
on UDP transports.
* A 'multihomed_on_rx_message' function was added to
pjsip_message_ip_updater that, for incoming requests, retrieves the
transport name from pjsip_transport->info and retrieves the transport.
If transport->symmetric_transport is set, an 'x-ast-txp' uri parameter
containing the transport name is added to the incoming Contact header.
* An 'ast_sip_get_transport_name' function was added to res_pjsip.
It takes an ast_sip_endpoint and a pjsip_sip_uri and returns a
transport name if endpoint->transport is set or if there's an
'x-ast-txp' parameter on the uri and the uri host is an ipv4 or
ipv6 address. Otherwise it returns NULL.
* An 'ast_sip_dlg_set_transport' function was added to res_pjsip
which takes an ast_sip_endpoint, a pjsip_dialog, and an optional
pjsip_tpselector. It calls ast_sip_get_transport_name() and if
a non-NULL is returned, sets the selector and sets the transport
on the dialog. If a selector was passed in, it's updated.
* res_pjsip/ast_sip_create_dialog_uac and ast_sip_create_dialog_uas
were modified to call ast_sip_dlg_set_transport() instead of their
original logic.
* res_pjsip/create_out_of_dialog_request was modified to call
ast_sip_get_transport_name() and pjsip_tx_data_set_transport()
instead of its original logic.
* Existing transport logic was removed from endpt_send_request
since that can only be called after a create_out_of_dialog_request.
* res_pjsip/ast_sip_create_rdata was converted to a wrapper around
a new 'ast_sip_create_rdata_with_contact' function which allows
a contact_uri to be specified in addition to the existing
parameters. (See below)
* res_pjsip_pubsub/internal_pjsip_evsub_send_request was eliminated
since all it did was transport selection and that is now done in
ast_sip_create_dialog_uac and ast_sip_create_dialog_uas.
* 'contact_uri' was added to subscription_persistence. This was
necessary because although the parsed rdata contact header has the
x-ast-txp parameter added (if appropriate),
subscription_persistence_update stores the raw packet which
doesn't have it. subscription_persistence_recreate was then
updated to call ast_sip_create_rdata_with_contact with the
persisted contact_uri so the recreated subscription has the
correct transport info to send the NOTIFYs.
* res_pjsip_session/internal_pjsip_inv_send_msg was eliminated since
all it did was transport selection and that is now done in
ast_sip_create_dialog_uac.
* pjsip_message_ip_updater/multihomed_on_tx_message was updated
to remove all traces of the x-ast-txp parameter from the
outgoing headers.
NOTE: This change does NOT modify the behavior of permanent
contacts specified on an aor. To do so would require that the
permanent contact's contact uri be updated with the x-ast-txp
parameter and the aor sorcery object updated. If we need to
persue this, we need to think about cloning permanent contacts into
the same store as the dynamic ones on an aor load so they can be
updated without disturbing the originally configured value.
You CAN add the x-ast-txp parameter to a permanent contact's uri
but it would be much simpler to just set endpoint->transport.
Change-Id: I4ee1f51473da32ca54b877cd158523efcef9655f
|
|
This patch updates the documenation in hep.conf.sample to better specify
how the various HEP modules interact.
ASTERISK-26717 #close
Change-Id: I337fb742a89e3ec5edc7fc7a7a0295218d841124
|
|
* apps/app_voicemail.c fromstring field added to mailbox which will
override the global fromstring if set.
ASTERISK-24562 #close
Change-Id: I5e90e3a1ec2b2d5340b49a0db825e4bbb158b2fe
|
|
into 13
|
|
Use the description of useragent from sip.conf here.
ASTERISK-26825 #close
Change-Id: I5b33a4aaa0ae1d793289d05e3bc09521affbf755
|
|
This change updates the documentation for the outbound_proxy option
to ensure it is consistently stated that a full SIP URI must be
provided for the option.
The res_pjsip_outbound_registration module has also been changed so
that the provided outbound_proxy value is checked to ensure it is a
URI and if not an error is output stating so.
ASTERISK-26782
Change-Id: I6c239a32274846fd44e65b44ad9bf6373479b593
|
|
Using the same auth section for inbound and outbound authentication is not
recommended. There is a difference in meaning for an empty realm setting
between inbound and outbound authentication uses.
An empty inbound auth realm represents the global section's default_realm
value when the authentication object is used to challenge an incoming
request. An empty outgoing auth realm is treated as a don't care wildcard
when the authentication object is used to respond to an incoming
authentication challenge.
ASTERISK-26799
Change-Id: Id3952f7cfa1b6683b9954f2c5d2352d2f11059ce
|
|
Original patch by John Covert, slight modifications by me.
ASTERISK-17428 #close
Reported by: John Covert
Patches:
app_voicemail.c.patch (license #5512) patch uploaded by
John Covert
Change-Id: Ic3361b0782e5a5397a19ab18eb8550923a9bd6a6
|
|
The entry for 'identify' was incorrectly placed in the
res_pjsip section when it should be in
res_pjsip_endpoint_identifier_ip.
ASTERISK-26785 #close
Change-Id: Ia1372b12a952bfe2df6b1b1e0e725ca306a5d41a
|
|
ASTERISK-26704 #close
Reported by: Anthony Messina
Change-Id: I976a1f94cf79c5f31e76174c61f5c6a65fd6354f
|
|
ast_loggrabber gathers log files from customizable search patterns,
optionally converts POSIX timestamps to a readable format and
tarballs the results.
Also a few tweaks were made to ast_coredumper.
Change-Id: I8bfe1468ada24c1344ce4abab7b002a59a659495
(cherry picked from commit 5fa1c56d7e76999aa14f133a33f6b168e7c3b99c)
|
|
This utility allows easy manipulation of asterisk coredumps.
* Configurable search paths and patterns for existing coredumps
* Can generate a consistent coredump from the running instance
* Can dump the lock_infos table from a coredump
* Dumps backtraces to separate files...
- thread apply 1 bt full -> <coredump>.thread1.txt
- thread apply all bt -> <coredump>.brief.txt
- thread apply all bt full -> <coredump>.full.txt
- lock_infos table -> <coredump>.locks.txt
* Can tarball corefiles and optionally delete them after processing
* Can tarball results files and optionally delete them after processing
* Converts ':' in coredump and results file names '-' to facilitate
uploading. Jira for instance, won't accept file names with colons
in them.
Tested on Fedora24+, Ubuntu14+, Debian6+, CentOS6+ and FreeBSD9+[1].
[1] For *BSDs, the "devel/gdb" package might have to be installed to
get a recent gdb. The utility will check all instances of gdb
it finds in $PATH and if one isn't found that can run python, it
prints a friendly error.
Change-Id: I935d37ab9db85ef923f32b05579897f0893d33cd
|
|
Use of the new logging is as simple as issuing the new CLI command or
setting the new pjproject.conf option.
Other options that can affect the logging are how you have the pjproject
log levels mapped to Asterisk log types in pjproject.conf and if you have
configured Asterisk to log the DEBUG type messages. Altering the
pjproject.conf level mapping shouldn't be necessary for most installations
as the default mapping is sensible. Configuring Asterisk to log the DEBUG
message type is standard practice for collecting debug information.
* Added CLI "pjproject set log level" command to dynamically adjust the
maximum pjproject log message level.
* Added CLI "pjproject show log level" command to see the currently set
maximum pjproject log message level.
* Added pjproject.conf startup section "log_level" option to set the
initial maximum pjproject log message level so all messages could be
captured from initialization.
* Set PJ_LOG_MAX_LEVEL to 6 to compile in all defined logging levels into
bundled pjproject. Pjproject will use the currently set run time log
level to determine if a log message is generated just like Asterisk
verbose and debug logging levels.
* In log_forwarder(), made always log enabled and mapped pjproject log
messages. DEBUG mapped log messages are no longer gated by the current
Asterisk debug logging level.
* Removed RAII_VAR() from res_pjproject.c:get_log_level().
ASTERISK-26630 #close
Change-Id: I6dca12979f482ffb0450aaf58db0fe0f6d2e5389
|
|
The dynamic range (96-127) allows 32 RTP Payload Types. RFC 3551 section 3
allows to reassign other ranges. Consequently, when the dynamic range is
exhausted, you can go for "rtp_pt_dynamic = 35" (or 0) in asterisk.conf. This
enables the range 35-63 (or 0-63) giving room for another 29 (or 64) payload
types.
ASTERISK-26311 #close
Change-Id: I7bc96ab764bc30098a178b841cbf7146f9d64964
(cherry picked from commit 9ac53877f688c06acaa7c377f15da8770e4ee88b)
|
|
codecs.conf.sample was missing codec opus's configuration options, descriptions,
and examples. This patch adds the configuration options and examples to
codecs.conf.sample that can be used with codec_opus.
ASTERISK-26538 #close
Change-Id: I1d89bb5e01d3e3b5bd78951b8dd0ff077a83dc8b
|
|
Removing explicit transport definition for endpoints and registrations. It
isn't necessary and isn't generally advised.
ASTERISK-26514 #close
Change-Id: Ifdec5e631962438a4683600968dfa4bfd15909fb
|
|
When channel format changes occurred as a result of an RTP
re-negotiation the bridge was not informed this had happened.
As a result the bridge technology was not re-evaluated and the
channel may have been in a bridge technology that was incompatible
with its formats. The bridge is now unbridged and the technology
re-evaluated when this occurs.
The chan_pjsip module also allowed asymmetric codecs for sending
and receiving. This did not work with all devices and caused one
way audio problems. The default has been changed to NOT do this
but to match the sending codec to the receiving codec. For users
who want asymmetric codecs an option has been added, asymmetric_rtp_codec,
which will return chan_pjsip to the previous behavior.
The codecs returned by the chan_pjsip module when queried by
the bridge_native_rtp module were also not reflective of the
actual negotiated codecs. The nativeformats are now returned as
they reflect the actual negotiated codecs.
ASTERISK-26423 #close
Change-Id: I6ec88c6e3912f52c334f1a26983ccb8f267020dc
|
|
This change adds support for dual stack automatically. No
configuration is required and the IP address and version
in the SIP messages and SDP will be automatically changed
based on the transport over which the message is being
sent. RTP usage has also been changed to listen on both
IPv4 and IPv6 simultaneously to allow media to flow, and
to allow ICE support on both simultaneously. This also
allows failover between IPv6 and IPv4 to work as expected.
ASTERISK-26309 #close
Change-Id: I235a421d8f9a326606d861b449fa6fe3a030572d
|
|
Introduces ice_blacklist configuration in rtp.conf. Subnets listed in the
form ice_blacklist = <subnet spec>, e.g. ice_blacklist =
192.168.1.0/255.255.255.0, are excluded from ICE host, srflx and relay
discovery. This is useful for optimizing the ICE process where a system
has multiple host address ranges and/or physical interfaces and certain
of them are not expected to be used for RTP. Multiple ice_blacklist
configuration lines may be used. If left unconfigured, all discovered
host addresses are used, as per previous behavior.
Documention in rtp.conf.sample.
ASTERISK-26418 #close
Change-Id: Ibee88f80d7693874fda1cceaef94a03bd86012c9
|
