| Age | Commit message (Collapse) | Author |
|---|
|
Change-Id: I873c1c6d00f447269bd841494459efccdd2c19c0
|
|
The mute/unmute sounds are only played when the
action is initiated using the DTMF menu.
ASTERISK-24756
Change-Id: I55b3dd5bc166096bf5e2f547ddd0ce355f36e3dc
|
|
streams." into 13
|
|
We should not do flood detection on video RTP streams. Video RTP streams
are very bursty by nature. They send out a burst of packets to update the
video frame then wait for the next video frame update. Really only audio
streams can be checked for flooding. The others are either bursty or
don't have a set rate.
* Added code to selectively disable packet flood detection for video RTP
streams.
ASTERISK-27440
Change-Id: I78031491a6e75c2d4b1e9c2462dc498fe9880a70
|
|
This no longer appears to exist, so no sense in causing confusion.
ASTERISK-27175 #close
Reported by: Tzafrir Cohen
Change-Id: Idde967924c69f6a741dc9a5ab7dacb44d22cf100
|
|
With Asterisk 12 (commit 866d968), the default of "icesupport" changed to
- "yes" in the module "res_rtp_asterisk" and
- "no" in the module "chan_sip".
The latter was reflected in the sample configuration file for "sip.conf". The
former did not make it into "rtp.conf.sample".
ASTERISK-20643
Change-Id: I2a2e0a900455d0767a99ea576e30adc6d7608a36
|
|
Change-Id: Id2899331fe05d1909a862ea879742879d086bc64
|
|
The OUTPUTDIR environment variable can now be set either in the
environment itself or in ast_debug_tools.conf. If set, it's used
for all work products instead of /tmp.
Also added the --tarball-config option that includes the contents
of /etc/asterisk when either --tarball-coredumps or --tarball-results
are used.
Change-Id: I66b2553319df61caea5b313d084f51978f730b4c
|
|
The media frame cache gets in the way of finding use after free errors of
media frames. Tools like valgrind and MALLOC_DEBUG don't know when a
frame is released because it gets put into the cache instead of being
freed.
* Added the "cache_media_frames" option to asterisk.conf. Disabling the
option helps track down media frame mismanagement when using valgrind or
MALLOC_DEBUG. The cache gets in the way of determining if the frame is
used after free and who freed it. NOTE: This option has no effect when
Asterisk is compiled with the LOW_MEMORY compile time option enabled
because the cache code does not exist.
To disable the media frame cache simply disable the cache_media_frames
option in asterisk.conf and restart Asterisk.
Sample asterisk.conf setting:
[options]
cache_media_frames=no
ASTERISK-27413
Change-Id: I0ab2ce0f4547cccf2eb214901835c2d951b78c00
|
|
When the identify_by option on an endpoint is set to ip it will
only be identified using the res_pjsip_endpoint_identifier_ip module.
This ensures that it is not mistakenly matched using the username of
the From header. To ensure behavior has not changed the default has
been changed to "username,ip" for the identify_by option.
ASTERISK-27206
Change-Id: I2170b86a7f7e221b4f00bf14aa1ef1ac5b050bbd
|
|
into 13
|
|
When "rewrite_contact" is enabled, the "max_contacts" count option can
block re-registrations because the source port from the endpoint can be
random. When the re-registration is blocked, the endpoint may give up
re-registering and require manual intervention.
* The "remove_existing" option now allows a registration to succeed by
displacing any existing contacts that now exceed the "max_contacts" count.
Any removed contacts are the next to expire. The behaviour change is
beneficial when "rewrite_contact" is enabled and "max_contacts" is greater
than one. The removed contact is likely the old contact created by
"rewrite_contact" that the device is refreshing.
ASTERISK-27192
Change-Id: I64c107a10b70db1697d17136051ae6bf22b5314b
|
|
Change-Id: I65a5190b2732b2246d67472db70dd37db64ddad4
|
|
|
|
Incoming requests with non sip(s) URIs in the Request, To, From
or Contact URIs are now rejected with
PJSIP_SC_UNSUPPORTED_URI_SCHEME (416). This is performed in
pjsip_message_filter (formerly pjsip_message_ip_updater) and is
done at pjproject's "TRANSPORT" layer before a request can even
reach the distributor.
URIs read by res_pjsip_outbound_publish from pjsip.conf are now
also checked for both length and sip(s) scheme. Those URIs read
by outbound registration and aor were already being checked for
scheme but their error messages needed to be updated to include
scheme failure as well as length failure.
Change-Id: Ibb2f9f1d2dc7549da562af4cbd9156c44ffdd460
|
|
A new endpoint parameter "incoming_mwi_mailbox" allows Asterisk to
receive unsolicited MWI NOTIFY requests and make them available to
other modules via the stasis message bus.
res_pjsip_pubsub has a new handler "pubsub_on_rx_mwi_notify_request"
that parses a simple-message-summary body and, if
endpoint->incoming_mwi_account is set, calls ast_publish_mwi_state
with the voice-message counts from the message.
Change-Id: I08bae3d16e77af48fcccc2c936acce8fc0ef0f3c
|
|
An admin can configure app_minivm with an externnotify program to be run
when a voicemail is received. The app_minivm application MinivmNotify
uses ast_safe_system() for this purpose which is vulnerable to command
injection since the Caller-ID name and number values given to externnotify
can come from an external untrusted source.
* Add ast_safe_execvp() function. This gives modules the ability to run
external commands with greater safety compared to ast_safe_system().
Specifically when some parameters are filled by untrusted sources the new
function does not allow malicious input to break argument encoding. This
may be of particular concern where CALLERID(name) or CALLERID(num) may be
used as a parameter to a script run by ast_safe_system() which could
potentially allow arbitrary command execution.
* Changed app_minivm.c:run_externnotify() to use the new ast_safe_execvp()
instead of ast_safe_system() to avoid command injection.
* Document code injection potential from untrusted data sources for other
shell commands that are under user control.
ASTERISK-27103
Change-Id: I7552472247a84cde24e1358aaf64af160107aef1
|
|
Add ability to use tokens instead of passwords according to Google OAuth 2.0
protocol.
ASTERISK-27169
Reported by: Andrey Egorov
Tested by: Andrey Egorov
Change-Id: I07f7052a502457ab55010a4d3686653b60f4c8db
|
|
|
|
This adds support for parsing timelen values from config files. This
includes support for all flags which apply to PARSE_INT32. Support for
this parser is added to ACO via the OPT_TIMELEN_T option type.
Fixes an issue where extra characters provided to ast_app_parse_timelen
were ignored, they now cause an error.
Testing is included.
ASTERISK-27117 #close
Change-Id: I6b333feca7e3f83b4ef5bf2636fc0fd613742554
|
|
ASTERISK-27127 #close
Reported by: HZMI8gkCvPpom0tM
Change-Id: I2b0c54570d58156e37166ac536728af3b6c01789
|
|
By default, when res_musiconhold reloads or unloads, it sends a HUP
signal to custom applications (and all descendants), waits 100ms,
then sends a TERM signal, waits 100ms, then finally sends a KILL
signal. An application which is interacting with an external
device and/or spawns children of its own may not be able to exit
cleanly in the default times, expecially if sent a KILL signal, or
if it's children are getting signals directly from
res_musiconhoild.
* To allow extra time, the 'kill_escalation_delay'
class option can be used to set the number of milliseconds
res_musiconhold waits before escalating kill signals, with the
default being the current 100ms.
* To control to whom the signals are sent, the "kill_method" class
option can be set to "process_group" (the default, existing
behavior), which sends signals to the application and its
descendants directly, or "process" which sends signals only to the
application itself.
Change-Id: Iff70a1a9405685a9021a68416830c0db5158603b
|
|
|
|
When connected_line_method is "invite", we're supposed to determine
if the client can support UPDATE and if it can, send UPDATE instead
of INVITE to avoid the SDP renegotiation. Not only was pjproject
not setting the PJSIP_INV_SUPPORT_UPDATE flag, we were testing
that invite_tsx wasn't NULL which isn't always the case.
* Updated chan_pjsip/update_connected_line_information to drop the
requirement that invite_tsx isn't NULL.
* Submitted patch to pjproject sip_inv.c that sets the
PJSIP_INV_SUPPORT_UPDATE flag correctly.
* Updated pjsip.conf.sample to clarify what happens when "invite"
is specified.
ASTERISK-27095
Change-Id: Ic2381b3567b8052c616d96fbe79564c530e81560
|
|
|
|
Change-Id: I7a610bef369924523a445c7e849ee88cc45dc5df
|
|
A new global option "imap_poll_logout" was added to specify whether need to
disconnect from the IMAP server after polling of mailboxes.
ASTERISK-27068 #close
Closing IMAP connection after loading mailbox from voicemail.conf
ASTERISK-24052 #close
Change-Id: Ib7558ba04516240a32b65f42e9be64372a0ae12a
|
|
|
|
This option was added to control whether to notify dialog-info state
'early' or 'confirmed' on Ringing when already INUSE.
The value "yes" is useful for some SIP phones (Cisco SPA)
to be able to indicate and pick up ringing devices.
ASTERISK-26919 #close
Change-Id: Ie050bc30023543c7dfb4365c5be3ce58c738c711
|
|
Reported by Sylvain Boily via asterisk-dev mailing list.
Change-Id: Idc7623f335aea3e144dd369ba383b9a757480a9d
|
|
|
|
ASTERISK-25101 #close
Change-Id: I09a97793e5577b4422d0ae883fadb3f0d86725cc
|
|
Change-Id: Ie1c2d83af66f27a449da09a68d987e0992627fee
|
|
This option was added to turn off notifying the progress details
on Blind Transfer. If this option is not set then the chan_pjsip
will send NOTIFY "200 OK" immediately after "202 Accepted".
Some SIP phones like Mitel/Aastra or Snom keep the line busy until
receive "200 OK".
ASTERISK-26333 #close
Change-Id: Id606fbff2e02e967c02138457badc399144720f2
|
|
|
|
This change adds the required logic to allow the SIP
Call-ID to be placed into the HEP RTCP traffic if the
chan_sip module is used. In cases where the option is
enabled but the channel is not either SIP or PJSIP then
the code will fallback to the channel name as done
previously.
Based on the change on Nir's branch at:
team/nirs/hep-chan-sip-support
ASTERISK-26427
Change-Id: I09ffa5f6e2fdfd99ee999650ba4e0a7aad6dc40d
|
|
All log messages go to a queue serviced by a single thread
which does all the IO. This setting controls how big that
queue can get (and therefore how much memory is allocated)
before new messages are discarded. The default is 1000.
Should something go bezerk and log tons of messages in a tight
loop, this will prevent memory escalation.
When the limit is reached, a WARNING is logged to that effect
and messages are discarded until the queue is empty again. At
that time another WARNING will be logged with the count of
discarded messages. There's no "low water mark" for this queue
because the logger thread empties the entire queue and processes it
in 1 batch before going back and waiting on the queue again.
Implementing a low water mark would mean additional locking as
the thread processes each message and it's not worth it.
A "test" was added to test_logger.c but since the outcome is
non-deterministic, it's really just a cli command, not a unit
test.
Change-Id: Ib4520c95e1ca5325dbf584c7989ce391649836d1
|
|
Added the stun_blacklist option to rtp.conf. Some multihomed servers have
IP interfaces that cannot reach the STUN server specified by stunaddr.
Blacklist those interface subnets from trying to send a STUN packet to
find the external IP address. Attempting to send the STUN packet
needlessly delays processing incoming and outgoing SIP INVITEs because we
will wait for a response that can never come until we give up on the
response. Multiple subnets may be listed.
ASTERISK-26890 #close
Change-Id: I3ff4f729e787f00c3e6e670fe6435acce38be342
|
|
This include was accidentally removed in changeset
Ia79aea64de89531362e993e34230c2044a70aa93. My bad.
Change-Id: I1d716c7f9590b4e97909fb8bca1f2ed9bd0e4082
|
|
|
|
|
|
This change adds database tables for the PUBLISH support so it
can be configured using realtime. A minor fix to the
res_pjsip_publish_asterisk module was done so that it read the
sorcery configuration from the correct section. Finally the
sample configuration files have been updated.
ASTERISK-26928
Change-Id: I81991ae5c75af98d247f7eacd1c0b0a763675952
|
|
Added:
* outbound-publish
* resource_list
* inbound-publication
* asterisk-publication
Change-Id: I65043a896c35483f30a92d30b5b118359af7ba5a
|
|
This takes care of warnings by ossobv/asterisklint.
Change-Id: Ia79aea64de89531362e993e34230c2044a70aa93
|
|
config" into 13
|
|
Two new parameters have been added to the pjsip config wizard.
* Setting 'sends_line_with_registrations' to true will cause the wizard
to skip the creation of an identify object to match incoming request
to the endpoint and instead add the line and endpoint parameters to
the outbound registration object.
* Setting 'outbound_proxy' is a shortcut for adding individual
endpoint/outbound_proxy, aor/outbound_proxy and
registration/outbound_proxy parameters.
Change-Id: I678e5f80765734c056620528a6d40d82736ceeb0
|
|
ASTERISK-26086 #close
Reported by: Jens Bürger
Change-Id: I6aab666c0bf01fd0c64d7a5bcb22fa7f5d41335e
|
|
Support for RFC3578 overlap dialling (i.e. 484 Response to partially matched
destinations) as currently provided by chan_sip is missing from res_pjsip.
This patch adds a new endpoint attribute (allow_overlap) [defaults to yes]
which when set to yes enables 484 responses to partial destination
matches rather than the current 404.
ASTERISK-26864
Change-Id: Iea444da3ee7c7d4f1fde1d01d138a3d7b0fe40f6
|
|
ASTERISK-26846 #close
Change-Id: I541a1602ff55ab73684e9f8002edb9e0e745d639
|
|
A new transport parameter 'symmetric_transport' has been added.
When a request from a dynamic contact comes in on a transport with
this option set to 'yes', the transport name will be saved and used
for subsequent outgoing requests like OPTIONS, NOTIFY and INVITE.
It's saved as a contact uri parameter named 'x-ast-txp' and will
display with the contact uri in CLI, AMI, and ARI output. On the
outgoing request, if a transport wasn't explicitly set on the
endpoint AND the request URI is not a hostname, the saved transport
will be used and the 'x-ast-txp' parameter stripped from the
outgoing packet.
* config_transport was modified to accept and store the new parameter.
* config_transport/transport_apply was updated to store the transport
name in the pjsip_transport->info field using the pjsip_transport->pool
on UDP transports.
* A 'multihomed_on_rx_message' function was added to
pjsip_message_ip_updater that, for incoming requests, retrieves the
transport name from pjsip_transport->info and retrieves the transport.
If transport->symmetric_transport is set, an 'x-ast-txp' uri parameter
containing the transport name is added to the incoming Contact header.
* An 'ast_sip_get_transport_name' function was added to res_pjsip.
It takes an ast_sip_endpoint and a pjsip_sip_uri and returns a
transport name if endpoint->transport is set or if there's an
'x-ast-txp' parameter on the uri and the uri host is an ipv4 or
ipv6 address. Otherwise it returns NULL.
* An 'ast_sip_dlg_set_transport' function was added to res_pjsip
which takes an ast_sip_endpoint, a pjsip_dialog, and an optional
pjsip_tpselector. It calls ast_sip_get_transport_name() and if
a non-NULL is returned, sets the selector and sets the transport
on the dialog. If a selector was passed in, it's updated.
* res_pjsip/ast_sip_create_dialog_uac and ast_sip_create_dialog_uas
were modified to call ast_sip_dlg_set_transport() instead of their
original logic.
* res_pjsip/create_out_of_dialog_request was modified to call
ast_sip_get_transport_name() and pjsip_tx_data_set_transport()
instead of its original logic.
* Existing transport logic was removed from endpt_send_request
since that can only be called after a create_out_of_dialog_request.
* res_pjsip/ast_sip_create_rdata was converted to a wrapper around
a new 'ast_sip_create_rdata_with_contact' function which allows
a contact_uri to be specified in addition to the existing
parameters. (See below)
* res_pjsip_pubsub/internal_pjsip_evsub_send_request was eliminated
since all it did was transport selection and that is now done in
ast_sip_create_dialog_uac and ast_sip_create_dialog_uas.
* 'contact_uri' was added to subscription_persistence. This was
necessary because although the parsed rdata contact header has the
x-ast-txp parameter added (if appropriate),
subscription_persistence_update stores the raw packet which
doesn't have it. subscription_persistence_recreate was then
updated to call ast_sip_create_rdata_with_contact with the
persisted contact_uri so the recreated subscription has the
correct transport info to send the NOTIFYs.
* res_pjsip_session/internal_pjsip_inv_send_msg was eliminated since
all it did was transport selection and that is now done in
ast_sip_create_dialog_uac.
* pjsip_message_ip_updater/multihomed_on_tx_message was updated
to remove all traces of the x-ast-txp parameter from the
outgoing headers.
NOTE: This change does NOT modify the behavior of permanent
contacts specified on an aor. To do so would require that the
permanent contact's contact uri be updated with the x-ast-txp
parameter and the aor sorcery object updated. If we need to
persue this, we need to think about cloning permanent contacts into
the same store as the dynamic ones on an aor load so they can be
updated without disturbing the originally configured value.
You CAN add the x-ast-txp parameter to a permanent contact's uri
but it would be much simpler to just set endpoint->transport.
Change-Id: I4ee1f51473da32ca54b877cd158523efcef9655f
|
