Age | Commit message (Collapse) | Author |
|
The "contact" object is not meant to be configured from the pjsip.conf
configuration file. It is meant to be created as a result of a registration
and stored elsewhere.
ASTERISK-24085 #close
Reported by: Rusty Newton
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@431860 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Looking at the Super Awesome Company sample reminded me that creating hints is
just plain gruntwork. So you can now have the pjsip conifg wizard auto-create
them for you.
Specifying 'hint_exten' in the wizard will create
'exten => <hint_exten>,hint/PJSIP/<wizard_id>'
in whatever is specified for 'hint_context'.
Specifying 'hint_application' in the wizard will create
'exten => <hint_exten>,1,<hint_application>'
in whatever is specified for 'hint_context'.
The default for 'hint_context' is the endpoint's context.
There's no default for 'hint_application'. If not specified, no app is added.
There's no default for 'hint_exten'. If not specified, neither the hint itself
nor the application will be created.
Some may think this is the slippery slope to users.conf but hints are a basic
necessity for phones unlike voicemail, manager, etc that users.conf creates.
Tested-by: George Joseph
Review: https://reviewboard.asterisk.org/r/4383/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@431643 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Added a new config property [servername] to the http.conf file; updated the http server to use the new property when sending responses, for showing http status through the CLI and when reporting status through the 'httpstatus' webpage.
ASTERISK-24316 #close
Reported By: Andrew Nagy
Review: https://reviewboard.asterisk.org/r/4374/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@431471 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
across a bridge.
Calling ast_channel_bridge_peer() cannot be done while holding any channel
locks. The reported issue hit the deadlock in chan_iax2, but an audit of
the ast_channel_bridge_peer() calls found three more locations where the
same deadlock can occur.
* Made CHANNEL(peer), res_fax, and the SNMP agent not call
ast_channel_bridge_peer() with any channel locked. For CHANNEL(peer) I
had to rework the logic to not hold the channel lock.
* Made chan_iax2 no longer call ast_channel_bridge_peer(). It was done
for legacy reasons that no longer apply.
* Removed the iax.conf forcejitterbuffer option. It is now always enabled
when the jitterbuffer option is enabled. If you put a jitter buffer on a
channel it will be on the channel.
ASTERISK-24600 #close
Reported by: Jeff Collell
Review: https://reviewboard.asterisk.org/r/4342/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@430817 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This allows for a path to be specified that has a collection of CA
certificates in it.
ASTERISK-24575 #close
Reported by cloos
Patches:
pj-ca-path-trunk.diff uploaded by cloos (License #5956)
Review: https://reviewboard.asterisk.org/r/4344
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@430709 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
The sample config was missing the configuration options for DTMF attended
transfer completion scenarios. The configuration options 'atxferabort',
'atxfercomplete', 'atxferthreeway', and 'atxferswap' are now documented in the
appropriate configuration file.
ASTERISK-24678 #close
Reported by: Niklas Larsson
patches:
features.conf.sample.diff uploaded by Niklas Larsson (License 5068)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@430526 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This change makes the T.38 negotiation timeout configurable via
't38timeout' in res_fax.conf or FAXOPT(t38timeout). It was previously
hard coded to be 5000 milliseconds.
This change also handles T.38 switch failures by aborting the fax since
in the case where this can happen, both sides have agreed to switch to
T.38 and Asterisk is unable to do so.
Review: https://reviewboard.asterisk.org/r/4320/
........
Merged revisions 430415 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@430416 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Updated the queues.conf.sample file to explicitly state which channel queue
variables are propagated to.
ASTERISK-24267
Reported by: Mitch Claborn
........
Merged revisions 430126 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@430127 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
connection-oriented transports.
Note that this is backport from trunk of r425825.
This change adds a module which is configurable using the keep_alive_interval setting in the
global section that will send a CRLF keep alive to all active connection-oriented transports at
the provided interval. This is useful because it can help keep connections open through NATs.
This functionality also exists within PJSIP but can not be controlled at runtime and requires
recompiling it.
Review: https://reviewboard.asterisk.org/r/4084/
ASTERISK-24644 #close
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@430084 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
res_pjsip_config_wizard
------------------
* This is a new module that adds streamlined configuration capability for
chan_pjsip. It's targetted at users who have lots of basic configuration
scenarios like 'phone' or 'agent' or 'trunk'. Additional information
can be found in the sample configuration file at
config/samples/pjsip_wizard.conf.sample.
Tested-by: George Joseph
Review: https://reviewboard.asterisk.org/r/4190/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@429592 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Prior to this patch, all Stasis subscriptions would receive a dedicated
thread for servicing published messages. In contrast, prior to r400178
(see review https://reviewboard.asterisk.org/r/2881/), the subscriptions
shared a thread pool. It was discovered during some initial work on Stasis
that, for a low subscription count with high message throughput, the
threadpool was not as performant as simply having a dedicated thread per
subscriber.
For situations where a subscriber receives a substantial number of messages
and is always present, the model of having a dedicated thread per subscriber
makes sense. While we still have plenty of subscriptions that would follow
this model, e.g., AMI, CDRs, CEL, etc., there are plenty that also fall into
the following two categories:
* Large number of subscriptions, specifically those tied to endpoints/peers.
* Low number of messages. Some subscriptions exist specifically to coordinate
a single message - the subscription is created, a message is published, the
delivery is synchronized, and the subscription is destroyed.
In both of the latter two cases, creating a dedicated thread is wasteful (and
in the case of a large number of peers/endpoints, harmful). In those cases,
having shared delivery threads is far more performant.
This patch adds the ability of a subscriber to Stasis to choose whether or not
their messages are dispatched on a dedicated thread or on a threadpool. The
threadpool is configurable through stasis.conf.
Review: https://reviewboard.asterisk.org/r/4193
ASTERISK-24533 #close
Reported by: xrobau
Tested by: xrobau
........
Merged revisions 428681 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@428687 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Optimistic SRTP is the ability to enable SRTP but not have it be
a fatal requirement. If SRTP can be used it will be, if not it won't be.
This gives you a better chance of using it without having your sessions
fail when it can't be.
Encrypt all the things!
Review: https://reviewboard.asterisk.org/r/3992/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@428222 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This allows for a configurable number of attempts for a transferer
to dial an extension to transfer the call to. For Asterisk 13, the
default values are such that upgrading between versions will not
cause a behaivour change. For trunk, though, the defaults will be
changed to be more user-friendly.
Review: https://reviewboard.asterisk.org/r/4167
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@428145 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
ASTERISK-24279 #close
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/4109/
........
Merged revisions 427901 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@427902 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Testing has shown repeatedly that PJSIP's default behavior of switching
automatically to TCP for large messages can cause issues. The most common
issues are that devices that we are communicating with do not handle the
switch to TCP gracefully, thus causing situations such as broken calls or
broken subscriptions. Now, in order to have this behavior happen, you must
opt into it. The sample file has been updated to warn that enabling the
TCP switch behavior may cause issues for you, so use at your own risk.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@427334 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
When a packet exceeds the MTU, pjproject will switch from UDP to TCP. In
some circumstances (on some networks), this can cause some issues with
messages not getting sent to the correct destination - and can also cause
connections to get dropped due to quirks in pjproject deciding to
terminate TCP connections with no messages.
While fixing the routing/messaging issues is important, having a
configuration option in Asterisk that tells pjproject to not switch over
to TCP would be useful. That way, if some glitch is discovered on some
other network/site, we can at least disable the behavior until a fix is
put into place.
AFS-197 #close
Review: https://reviewboard.asterisk.org/r/4137/
........
Merged revisions 427129 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@427130 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
A question arose as to whether a .pem file
could be provided in place of the .crt and
.key files in a PJSIP TLS configuration. I
tested this and discovered that although a
cert will be read from the pem file, a key
will not, and thus the priv_key_file entry
is still required. This update to the fine
documentation clarifies the option usage.
AST-1448 #close
Review: https://reviewboard.asterisk.org/r/4129/
Reported by: John Bigelow
........
Merged revisions 426928 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@426930 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@426459 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
extensions.conf.sample
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@426294 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
AST-1432 #close
Reported by: John Bigelow
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@425905 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This module allows res_pjsip to integrate with res_phoneprov. It handles
the pjsip 'phoneprov' object type.
Tested-by: George Joseph
Review: https://reviewboard.asterisk.org/r/3976/
........
Merged revisions 425007 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@425008 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This patch makes res_phoneprov more modular so other modules (like pjsip)
can provide configuration information instead of res_phoneprov relying solely
on users.conf and sip.conf. To accomplish this a new ast_phoneprov public API
is now exposed which allows config providers to register themselves, set
defaults (server profile, etc) and add user extensions.
* ast_phoneprov_provider_register registers the provider and provides callbacks
for loading default settings and loading users.
* ast_phoneprov_provider_unregister clears the defaults and users.
* ast_phoneprov_add_extension should be called once for each user/extension
by the provider's load_users callback to add them.
* ast_phoneprov_delete_extension deletes one extension.
* ast_phoneprov_delete_extensions deletes all extensions for the provider.
Tested-by: George Joseph
Review: https://reviewboard.asterisk.org/r/3970/
........
Merged revisions 424963 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@424964 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
The pjsip config option default fixups from r424263 altered the
functional default from "allowed_not_screened" to "allowed". This
change restores the functional default value when none is provided.
........
Merged revisions 424426 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@424427 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
cipher names.
Improvements to the res_pjsip transport cipher option.
* Made the cipher option accept a comma separated list of OpenSSL cipher
names. Users of realtime will be glad if they have more than one name to
list.
* Added the CLI command 'pjsip list ciphers' so a user can know what
OpenSSL names are available for the cipher option.
* Updated the cipher option online XML documentation to specify what is
expected for the value.
* Updated pjsip.conf.sample to not indicate that ALL is acceptable since
ALL does not imply a preference order for the ciphers and PJSIP does not
simply pass the string to OpenSSL for interpretation.
ASTERISK-24199 #close
Reported by: Joshua Colp
Review: https://reviewboard.asterisk.org/r/4018/
........
Merged revisions 424393 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@424394 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Without setting rewrite_contact, an invite to an endpoint
behind NAT will not reach it - unless the endpoint itself
uses STUN or TURN to discover it's public URI. Thus, the
use of this should be in the sample documentation.
Review: https://reviewboard.asterisk.org/r/4036/
........
Merged revisions 424337 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@424338 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
During the latest update to DTLS-SRTP support the ability to configure
the hash used for fingerprints was added. This gave us two supported ones:
SHA-1 and SHA-256. The default was accordingly updated to SHA-256.
Unfortunately this configuration ability was not exposed within res_pjsip.
This change adds a dtls_fingerprint option that controls it.
#SIPit31
........
Merged revisions 424290 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@424291 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This updates the code behind PJSIP configuration options with custom
handlers to deal with the assigned default values properly where it
makes sense and adjusting the default value where it doesn't. Before
applying this patch, there were several cases where the default value
for an option would prevent that config section from loading properly.
Reported by: Thomas Thompson
Review: https://reviewboard.asterisk.org/r/4019/
........
Merged revisions 424263 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@424266 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Document it in sip.conf.
ASTERISK-24249 #close
Reported by: Avinash Mohod
Review: https://reviewboard.asterisk.org/r/3926/
........
Merged revisions 423066 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 423067 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 423068 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@423069 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@422855 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
On review /r/3977, it was recommended to note in the
sample configuration about the size limitation for
resource lists. However, since there was no section in
the sample configuration at all for resource list
subscriptions, I decided to make a separate commit
where I have added the necessary sample configuration
as well as the size limitation warning.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@422853 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This patch gives the optional ability to keep queue rules in RealTime. It is
important to note that with this patch:
(a) Queue rules in RealTime are only examined on module load/reload
(b) Queue rules are loaded both from the queuerules.conf file as well as the
RealTime backend
To inform app_queue to examine RealTime for queue rules, a new setting has been
added to queuerules.conf's general section "realtime_rules". RealTime queue
rules will only be used when this setting is set to "yes".
The schema for the database table supports a rule_name, time, min_penalty, and
max_penalty columns. min_penalty and max_penalty can be relative, if a '-' or
'+' literal is provided. Otherwise, the penalties are treated as constants.
For example:
rule_name, time, min_penalty, max_penalty
'default', '10', '20', '30'
'test2', '20', '30', '55'
'test2', '25', '-11', '+1111'
'test2', '400', '112', '333'
'test3', '0', '4564', '46546'
'test_rule', '40', '15', '50'
which would result in :
Rule: default
- After 10 seconds, adjust QUEUE_MAX_PENALTY to 30 and adjust
QUEUE_MIN_PENALTY to 20
Rule: test2
- After 20 seconds, adjust QUEUE_MAX_PENALTY to 55 and adjust
QUEUE_MIN_PENALTY to 30
- After 25 seconds, adjust QUEUE_MAX_PENALTY by 1111 and adjust
QUEUE_MIN_PENALTY by -11
- After 400 seconds, adjust QUEUE_MAX_PENALTY to 333 and adjust
QUEUE_MIN_PENALTY to 112
Rule: test3
- After 0 seconds, adjust QUEUE_MAX_PENALTY to 46546 and adjust
QUEUE_MIN_PENALTY to 4564
Rule: test_rule
- After 40 seconds, adjust QUEUE_MAX_PENALTY to 50 and adjust
QUEUE_MIN_PENALTY to 15
If you use RealTime, the queue rules will be always reloaded on a module
reload, even if the underlying file did not change. With the option disabled,
the rules will only be reloaded if the file was modified.
Review: https://reviewboard.asterisk.org/r/3607/
ASTERISK-23823 #close
Reported by: Michael K
patches:
app_queue.c_realtime_trunk.patch uploaded by Michael K (License 6621)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@420624 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
ASTERISK-24045
Reported by: Jacob Barber
Review: https://reviewboard.asterisk.org/r/3833/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@420577 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This introduces stasis.conf and a mechanism to prevent certain message
types from being published. Internally, this works by preventing the
chosen message types from being created which ensures that those
message types can never be published. This patch also adjusts message
publishers such that message payloads are not created if the related
message type is not available.
ASTERISK-23943 #close
Review: https://reviewboard.asterisk.org/r/3823/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@420124 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This moves all samples configs from configs/ to configs/samples. This allows
for additional sets of sample configuration files to be added in the future.
Review: https://reviewboard.asterisk.org/r/3804/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@418870 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Most channel drivers let you specify a default accountcode to be set on
channels associated with a particular peer/endpoint/object. Prior to this
patch, chan_pjsip/res_pjsip did not support such a setting.
This patch adds a new setting to the res_pjsip endpoint object, 'accountcode'.
When a channel is created that is associated with an endpoint with this value
set, the channel will automatically have its accountcode property set to the
value configured for the endpoint.
Review: https://reviewboard.asterisk.org/r/3724/
ASTERISK-24000 #close
Reported by: Matt Jordan
........
Merged revisions 418756 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@418757 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This patch adds support for the PostgreSQL application_name connection setting.
When the appropriate PostgreSQL module's configuration is set with an
application name, the name will be passed to PostgreSQL on connection and
displayed in the database's pg_stat_activity view, as well as in CSV logs. This
aids in managing which applications/servers are connected to a PostgreSQL
database, as well as tracing the activity of those connections.
Review: https://reviewboard.asterisk.org/r/3591
ASTERISK-23737 #close
Reported by: Gergely Domodi
patches:
pgsql_application_name.patch uploaded by Gergely Domodi (License 6610)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@418755 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@418566 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This change removes h323.conf.sample, jingle.h, jabber.h left behind by r3698.
Review: https://reviewboard.asterisk.org/r/3755/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@418448 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Billing records are fair,
To get paid is quite bright,
You should really use ODBC;
Good-bye cdr_sqlite.
Microsoft did once push H.323,
Hell, we all remember NetMeeting.
But try to compile chan_h323 now
And you will take quite a beating.
The XMPP and SIP war was fierce,
And in the distant fray
Was birthed res_jabber/chan_jingle;
But neither to stay.
For everyone did care and chase what Google professed.
"Free Internet Calling" was what devotees cried,
But Google did change the specs so often
That the developers were happy the day chan_gtalk died.
And then there was that odd application
Dedicated to the Polish tongue.
app_saycountpl was subsumed by Say;
One could say its bell was rung.
To read and parse a file from the dialplan
You could (I guess) use an application.
app_readfile did fill that purpose, but I think
A function is perhaps better in its creation.
Barging is rude, I'm not sure why we do it.
Inwardly, the caller will probably sigh.
But if you really must do it,
Don't use app_dahdibarge, use ChanSpy.
We all despise the sound of tinny robots
It makes our queues so cold.
To control such an abomination
It's better to not use Wait/SetMusicOnHold.
It's often nice to know properties of a channel
It makes our calls right
We have a nice function called CHANNEL
And so SIPCHANINFO is sent off into the night.
And now things get odd;
Apparently one could delimit with a colon
Properties from the SIPPEER function!
Commas are in; all others are done.
Finally, a word on pipes and commas.
We're sorry. We can't say it enough.
But those compatibility options in asterisk.conf;
To maintain them forever was just too tough.
This patch removes:
* cdr_sqlite
* chan_gtalk
* chan_jingle
* chan_h323
* res_jabber
* app_saycountpl
* app_readfile
* app_dahdibarge
It removes the following applications/functions:
* WaitMusicOnHold
* SetMusicOnHold
* SIPCHANINFO
It removes the colon delimiter from the SIPPEER function.
Finally, it also removes all compatibility options that were configurable from
asterisk.conf, as these all applied to compatibility with Asterisk 1.4 systems.
Review: https://reviewboard.asterisk.org/r/3698/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@418019 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
The new inband_on_setup_ack option causes Asterisk to assume inband audio
may be present when a SETUP_ACKNOWLEDGE message is received.
Q.931 Section 5.1.3 says that in scenarios with overlap dialing, when a
dialtone is sent from the network side, progress indicator 8 "Inband info
now available" MAY be sent to the CPE if no digits were received with the
SETUP. It is thus implied that the ie is mandatory if digits came with
the SETUP and dialtone is needed. This option should be enabled, when the
network sends dialtone and you want to hear it, but the network doesn't
send the progress indicator when needed.
NOTE: For Q.SIG setups this option should be enabled when outgoing overlap
dialing is also enabled because Q.SIG does not send the progress indicator
with the SETUP ACK.
The commit -r413714 (AST-1338) which causes this issue was dealing with a
SIP-to-ISDN interoperability issue.
This commit is a merge of the two patches indicated below.
ASTERISK-23897 #close
Reported by: Pavel Troller
Patches:
pri-4.diff (license #6302) patch uploaded by Pavel Troller
jira_asterisk_23897_v11.patch (license #5621) patch uploaded by rmudgett
Review: https://reviewboard.asterisk.org/r/3633/
........
Merged revisions 417956 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 417957 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 417958 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@417976 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Persistent HTTP connection support is needed due to the increased usage of
the Asterisk core HTTP transport and the frequency at which REST API calls
are going to be issued.
* Add http.conf session_keep_alive option to enable persistent
connections.
* Parse and discard optional chunked body extension information and
trailing request headers.
* Increased the maximum application/json and
application/x-www-form-urlencoded body size allowed to 4k. The previous
1k was kind of small.
* Removed a couple inlined versions of ast_http_manid_from_vars() by
calling the function. manager.c:generic_http_callback() and
res_http_post.c:http_post_callback()
* Add missing va_end() in ast_ari_response_error().
* Eliminated unnecessary RAII_VAR() use in http.c:auth_create().
ASTERISK-23552 #close
Reported by: Scott Griepentrog
Review: https://reviewboard.asterisk.org/r/3691/
........
Merged revisions 417880 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@417901 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
http://svn.asterisk.org/svn/asterisk/branches/11
........
res_rtp_asterisk: Add SHA-256 support for DTLS and perform DTLS negotiation on RTCP.
This change fixes up DTLS support in res_rtp_asterisk so it can accept and provide
a SHA-256 fingerprint, so it occurs on RTCP, and so it occurs after ICE negotiation
completes. Configuration options to chan_sip and chan_pjsip have also been added to
allow behavior to be tweaked (such as forcing the AVP type media transports in SDP).
ASTERISK-22961 #close
Reported by: Jay Jideliov
Review: https://reviewboard.asterisk.org/r/3679/
Review: https://reviewboard.asterisk.org/r/3686/
........
Merged revisions 417678 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@417679 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
When a client takes a long time to process information received from Asterisk,
a write operation using fwrite may fail to write all information. This causes
the underlying file stream to be in an unknown state, such that the socket
must be disconnected. Unfortunately, there are two problems with this in
Asterisk's existing websocket code:
1. Periodically, during the read loop, Asterisk must write to the connected
websocket to respond to pings. As such, Asterisk maintains a reference to
the session during the loop. When ast_http_websocket_write fails, it may
cause the session to decrement its ref count, but this in and of itself
does not break the read loop. The read loop's write, on the other hand,
does not break the loop if it fails. This causes the socket to get in a
'stuck' state, preventing the client from reconnecting to the server.
2. More importantly, however, is that the fwrite in ast_http_websocket_write
fails with a large volume of data when the client takes awhile to process
the information. When it does fail, it fails writing only a portion of
the bytes. With some debugging, it was shown that this was failing in a
similar fashion to ASTERISK-12767. Switching this over to ast_careful_fwrite
with a long enough timeout solved the problem.
Note that this version of the patch, unlike r417310 in Asterisk 11, exposes
configuration options beyond just chan_sip's sip.conf. Configuration options
to configure the write timeout have also been added to pjsip.conf and ari.conf.
#ASTERISK-23917 #close
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/3624/
........
Merged revisions 417310 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 417311 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@417317 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
The sample extensions.lua was causing pbx_lua to fail to load when parsing
'app.goto("default", "s", 1)' because in Lua 5.2, 'goto' is now a reserved
word. This patch adds guidance to extensions.lua.sample and changed
'app.goto("default", "s", 1)' to 'app.['goto']("default", "s", 1)'.
ASTERISK-23844 #close
Reported by: rnewton
Tested by: gtjoseph
Review: https://reviewboard.asterisk.org/r/3627/
........
Merged revisions 416581 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 416582 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@416589 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
* SS7 support now requires libss7 v2.0 or later. The new libss7 is not
backwards compatible.
* Added SS7 support for connected line and redirecting.
* Most SS7 CLI commands are reworked as well as new SS7 commands added.
See online CLI help.
* Added several SS7 config option parameters described in
chan_dahdi.conf.sample.
* ISUP timer support reworked and now requires explicit configuration.
See ss7.timers.sample.
Special thanks to Kaloyan Kovachev for his support and persistence in
getting the original patch by adomjan updated and ready for release.
SS7-27 #close
Reported by: adomjan
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@416416 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Simply establishing a TCP connection and never sending anything to the
configured HTTP port in http.conf will tie up a HTTP connection. Since
there is a maximum number of open HTTP sessions allowed at a time you can
block legitimate connections.
A similar problem exists if a HTTP request is started but never finished.
* Added http.conf session_inactivity timer option to close HTTP
connections that aren't doing anything. Defaults to 30000 ms.
* Removed the undocumented manager.conf block-sockets option. It
interferes with TCP/TLS inactivity timeouts.
* AMI and SIP TLS connections now have better authentication timeout
protection. Though I didn't remove the bizzare TLS timeout polling code
from chan_sip.
* chan_sip can now handle SSL certificate renegotiations in the middle of
a session. It couldn't do that before because the socket was non-blocking
and the SSL calls were not restarted as documented by the OpenSSL
documentation.
* Fixed an off nominal leak of the ssl struct in
handle_tcptls_connection() if the FILE stream failed to open and the SSL
certificate negotiations failed.
The patch creates a custom FILE stream handler to give the created FILE
streams inactivity timeout and timeout after a specific moment in time
capability. This approach eliminates the need for code using the FILE
stream to be redesigned to deal with the timeouts.
This patch indirectly fixes most of ASTERISK-18345 by fixing the usage of
the SSL_read/SSL_write operations.
ASTERISK-23673 #close
Reported by: Richard Mudgett
........
Merged revisions 415841 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 415854 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 415896 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@415907 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Changed naming of included alias templates to avoid confusion between version names. For example, asterisk12 was for asterisk 1.2, so I changed it to asterisk_1dot2, so that later we can use asterisk_12 for Asterisk 12.
Added alias for "features reload" to the template for Asterisk 11 style syntax template, as features reload was removed in 12, but you can still do "module reload features"
Added alias for "pjsip reload" to the friendly template. It is shorter than "module reload res_pjsip.so" and if some are like me; I constantly forget that reloading chan_pjsip doesn't parse config. Remembering "pjsip reload" is just easier.
ASTERISK-23654 #close
ASTERISK-23654 #comment Fixed by adding two new aliases and enhancements for context names.
Review: https://reviewboard.asterisk.org/r/3572/
........
Merged revisions 415301 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@415302 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
be mediaencryption=sdes
privkey_file was missed in the snake case update. An example included an invalid value for the mediaencryption option.
........
Merged revisions 414780 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@414781 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
1) Added the unistim.conf variable dtmf_duration which can select the DTMF playback duration from 0ms to 150ms (0 is off and is the new default)
2) Enabled the transmission of month names, which are sent with the date and changed the dateformat variable to accept the values 0-3 as per the UNISTIM standard (2 & 3 match the previous 1 & 2 formats).
3) Enabled the "Mute" packet so muting microphone works as expected and microphone muted for all calls while LED light on
4) Changed Duree to Timer on i2004 display
(closes issue ASTERISK-23592)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@413048 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
In r411189, some behavior was changed which made sendrpid behavior
act in a more trusting manner by sending full user data for peers
set with private caller presence in P-Asserted-Identity headers.
Since this changed long time expected behaviors, we decided to pull
that patch when that was pointed out by the community. Instead, this
patch provides a trust_id_outbound setting which will expose the data
per RFC-3325 if set to 'yes' and simply not send the PAI/RPID headers
at all if set to 'no'. By default trust_id_outbound will be set to
'legacy' which will preserve the behavior prior to these patches.
Extra special thanks to Walter Doekes for providing advice and
feedback.
(closes issue AST-1301)
(closes issue ASTERISK-19465)
Reported by: Krzysztof Chmielewski
Review: https://reviewboard.asterisk.org/r/3447/
........
Merged revisions 412744 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 412746 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 412747 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@412759 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|