Age | Commit message (Collapse) | Author |
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r218331 | tilghman | 2009-09-14 14:16:35 -0500 (Mon, 14 Sep 2009) | 4 lines
Don't say "Please try again" if we don't give the user another chance to try again.
(issue #15055, SWP-129)
Reported by: jthurman
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@218361 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@216846 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@216694 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r216430 | oej | 2009-09-04 15:45:48 +0200 (Fre, 04 Sep 2009) | 27 lines
Make apps send PROGRESS control frame for early media and fix too early media issue in SIP
The issue at hand is that some legacy (dying) PBX systems send empty media frames on PRI
links *before* any call progress. The SIP channel receives these frames and by default
signals 183 Session progress and starts sending media. This will cause phones to
play silence and ignore the later 180 ringing message. A bad user experience.
The fix is twofold:
- We discovered that asterisk apps that support early media ("noanswer") did not send
any PROGRESS frame to indicate early media. Fixed.
- We introduce a setting in chan_sip so that users can disable any relay of media frames
before the outbound channel actually indicates any sort of call progress.
In 1.4, 1.6.0 and 1.6.1, this will be disabled for backward compatibility. In later versions
of Asterisk, this will be enabled. We don't assume that it will change your Asterisk
phone experience - only for the better.
We encourage third-party application developers to make sure that if they have applications
that wants to send early media, add a PROGRESS control frame transmission to make sure that
all channel drivers actually will start sending early media. This has not been the default
in Asterisk previous to this patch, so if you got inspiration from our code, you need to
update accordingly. Sorry for the trouble and thanks for your support.
This code has been running for a few months in a large scale installation (over 250
servers with PRI and/or BRI links to old PBX systems).
That's no proof that this is an excellent patch, but, well, it's tested :-)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@216438 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
(closes issue #12912)
Reported by: rathaus
Tested by: tilghman, russell, dvossel, dbrooks
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@215955 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
ISDN PTMP CPE spans.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@215757 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@214272 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r213493 | qwell | 2009-08-21 11:03:21 -0500 (Fri, 21 Aug 2009) | 5 lines
Clarify queues.conf comments to specify that variables should be set in the dialplan.
(closes issue #15755)
Reported by: trendboy
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@213494 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Allows characters that are otherwise used as delimiters to be used within
certain fields (like the secret).
(closes issue #15008, closes issue #15672)
Reported by: tilghman
Patches:
20090818__issue15008.diff.txt uploaded by tilghman (license 14)
Tested by: lmadsen, tilghman
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@213098 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This eliminates a future source of possible confusion with the configuration of
1.6.1 and higher.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@212857 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
or To header in the incoming request. Eligible domains are taken from the domains list in the config file. This functionality is enabled when domainsasrealm is enabled in the config file.
(closes issue #11361)
Reported by: arkadia
Patches:
sip_realm_mnich_to_added_2.patch uploaded by arkadia (license 233)
Tested by: arkadia
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@211947 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
It is clear from multiple mailing list, forum, wiki and other sorts of posts
that users don't really understand the effects that the 'canreinvite' config
option actually has, and that in some cases they think that setting it to 'no'
will actually cause various other features (T.38, MOH, etc.) to not work properly,
when in fact this is not the case. This patch changes the proper name of the
option to what it should have been from the beginning ('directmedia'), but
preserves backwards compatibility for existing configurations.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@210190 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
(closes issue #15071)
Reported by: ughnz
Patches:
optional-sms1.diff uploaded by mnicholson (license 96)
Tested by: ughnz, mnicholson
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@209993 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@209674 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r209131 | mmichelson | 2009-07-27 12:44:06 -0500 (Mon, 27 Jul 2009) | 18 lines
Allow for UDPTL to use only even-numbered ports if desired.
There are some VoIP providers out there that will not accept SDP
offers with odd numbered UDPTL ports. While it is my personal opinion
that these VoIP providers are misinterpreting RFC 2327, it really is
not a big deal to play along with their silly little games. Of course,
since restricting UDPTL ports to only even numbers reduces the range
of available ports by half, so the option to use only even port numbers
is off by default. A user can enable the behavior by setting
use_even_ports=yes in udptl.conf.
(closes issue #15182)
Reported by: CGMChris
Patches:
15182.patch uploaded by mmichelson (license 60)
Tested by: CGMChris
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@209132 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Requiring 'module reload' to reload everything, including
core etc makes russell very unhappy.
The default configuration already loads the 'friendly' aliases template.
Added 'reload=module reload' to that template.
Also removed the comment in main/cli.c that reload should come back.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@208813 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@207095 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r206872 | dvossel | 2009-07-16 16:33:19 -0500 (Thu, 16 Jul 2009) | 6 lines
error in iax.conf related IP-based access control
(closes issue #15518)
Reported by: pkempgen
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@206873 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@206603 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This is a continuation of revision 885 to LibPRI (Capture and expose the Reverse
Charging Indication IE on ISDN PRI) which added the ability to get/set Reverse
Charging Indication in LibPRI. This patch adds the ability to specify RCI on
the outbound leg of a PRI call from within Asterisk, by prefixing the dialed
number with a capital 'C' like:
...,Dial(DAHDI/g1/C4445556666)
And to read it off an inbound channel:
exten => s,1,Set(RCI=${CHANNEL(reversecharge)})
Thanks again to rmudgett for the thorough review.
(closes issue #13760)
Reported by: mrgabu
Review: https://reviewboard.asterisk.org/r/303/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@204749 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@204654 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
.sample).
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@204440 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@204428 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@204423 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@204422 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@204419 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Someone asked yesterday, "is there a good reason why we can't just put these
modules in Asterisk?". After a brief discussion, as long as the modules are
clearly set aside in their own directory and not enabled by default, it is
perfectly fine.
For more information about why a module goes in addons, see README-addons.txt.
chan_ooh323 does not currently compile as it is behind some trunk API updates.
However, it will not build by default, so it should be okay for now.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@204413 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@204217 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@204119 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This might seem like a legitimate comment that merely needed semicolon
prefixes, but in reality, the adaptive layer is designed to allow arbitrary
CDR variables, without needing the use of a userfield to store multiple items.
It's therefore not only invalid syntax but also goes against the intent of the
adaptive method.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@204069 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
The original patch for this was written by Brett Bryant, and I split it out into
it's own module.
(closes issue #12876)
Reported by: bbryant
Patches:
06162008_cdr_custom_syslog.diff uploaded by bbryant (license 36)
05212009_cdr_syslog.patch uploaded by seanbright (license 71)
Tested by: seanbright
Review: https://reviewboard.asterisk.org/r/297/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@203846 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
configurable values for finer control.
(closes issue #8855)
Reported by: mikma
Tested by: klaus3000, file
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@203735 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
application and channel.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@203699 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
CEL is the new system for logging channel events. This was inspired after
facing many problems trying to represent what is possible to happen to a call
in Asterisk using CDR records. For more information on CEL, see the built in
HTML or PDF documentation generated from the files in doc/tex/.
Many thanks to Steve Murphy (murf) and Brian Degenhardt (bmd) for their hard
work developing this code. Also, thanks to Matt Nicholson (mnicholson) and
Sean Bright (seanbright) for their assistance in the final push to get this
code ready for Asterisk trunk.
Review: https://reviewboard.asterisk.org/r/239/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@203638 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
GR-303.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@203402 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Also change the preferred configuration option from 'hostname' (which was
misleading because it didn't actually treat the value as a hostname) to
'connection' and added some verbage explaining that the user would need to
refer to their freetds.conf file for those settings. 'hostname' was kept
as a backwards compatible configuration parameter.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@202887 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
chan_sip has an option to save the sysname on rtupdate. This patch copies that same logic to chan_iax.
(closes issue #14837)
Reported by: barthpbx
Patches:
iax2-rtsavesysname.patch uploaded by barthpbx (license 744)
rt_iax.diff uploaded by dvossel (license 671)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@201534 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
the new skip category feature unless supported
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@200799 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
realize this was never done but was working anyways
also added support for skip category request feature of openr2 and updated chan_dahdi.conf.sample
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@200477 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
should be specified.
(closes issue #14367)
Reported by: Nick_Lewis
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@198791 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This code was there because of the AgentCallbackLogin() application.
->loginchan[] member was only used by AgentCallbackLogin().
Agent where dumped to astdb if they where logged in using AgentCallbacklogin()
so they are not being dumper anymore.
Review: https://reviewboard.asterisk.org/r/267/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@198217 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@198186 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@197824 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@197777 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This commit add Calendaring support to Asterisk for iCalendar, CalDAV, and MS
Exchange calendars. Exchange support has only been tested on Exchange Server 2k3
and does not support forms-based authentication at this time (patches *very*
welcome). Exchange support is also currently missing the ability to return a
list of a meting's attendees (again, patches are very, very welcome).
Features include:
Querying a calendar for events over a specific time range
Checking a calendar's busy status via the dialplan
Writing calendar events via the dialplan (CalDAV and Exchange only)
Handling calendar event notifications through the dialplan
(closes issue #14771)
Tested by: lmadsen, twilson, Shivaprakash
Review: https://reviewboard.asterisk.org/r/58
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@197738 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Let's try that again, this time removing trailing whitespace and not leading
whitespace. I can't believe no one noticed.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@197535 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@197528 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@197406 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@197189 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
the sample configuration files.
(closes issue #15207)
Reported by: seandarcy
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@197089 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|