Age | Commit message (Collapse) | Author |
|
When r383579 was committed, it made Jansson a required dependency.
While libjansson-dev and jansson-devel are available on recent
distros, some older (but still supported) distros don't have
it. There's a pull request[1] to get it into repoforge, but that still
doesn't help everyone. (And helps no one until the pull request is
merged and packages are built).
This patch adds Jansson install from source to the install_unpackaged()
function. There are a few gotcha's, which makes this change not
completely trivial.
* Since Jansson may be installed by a package, don't install from
source if a package installation can be found
* libresample may also be installed via package, so I added a
similar check to that.
* Since Jansson installs into /usr/local, this patch also adds
/usr/local/lib to /etc/ld.so.conf.d so that the library can be
found.
* The alternative was to install into /usr, but then it gets
complicated having to deal with EL's /usr/lib{32,64} shenanigans.
[1]: https://github.com/repoforge/rpms/pull/250
Review: https://reviewboard.asterisk.org/r/2414/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@384488 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@383747 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@383728 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This patch adds support for RFC 3327 "Path" headers. This can be enabled in
sip.conf using the 'supportpath' setting, either on a global basis or on a
peer basis. This setting enables Asterisk to route outgoing out-of-dialog
requests via a set of proxies by using a pre-loaded route-set defined by the
Path headers in the REGISTER request. This patch also adds Realtime support
for dynamically updating the Path information for a peer.
A huge thank-you to Klaus Darillion and Olle E Johansson for their efforts
in writing this patch.
Review: https://reviewboard.asterisk.org/r/2235/
Review: https://reviewboard.asterisk.org/r/991/
(closes issue ASTERISK-16884)
Reported by: klaus3000
Tested by: klaus3000, oej, mjordan
patches:
path-1.8.0-patch.txt uploaded by klaus3000 (License 5054)
oolong-path-support-trunk in team branch by oej (License 5267)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@382440 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This adds the ability to get the DPMA version, a listing of the local
firmware directory, and indexes of configured remote directories.
(closes issue AST-1070)
Reported By: Malcolm Davenport
Tested By: Kinsey Moore <kmoore@digium.com>
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@380004 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
When r376428 was commited to re-order start up sequences to be more tolerant of
forking with thread primitives, a few items were changed that caused changes
in behavior on some distros. This includes:
* Not displaying the splash screen on a remote console.
* Displaying an error message on stderr when a remote console cannot connect
to a running instance of Asterisk.
In the first case, the splash screen was re-added (thanks to Michael L. Young).
In the second case, the various init.d scripts were modified to pipe stderr
to /dev/null, as the error message is useful - if you execute a remote
console or a remote console command execution and it fail, it should tell
you. Note that the error message was always present, it just failed to be
printed prior to r376428.
Much thanks to the folks who quickly reported this problem, provided solutions,
and promptly tested the various init.d scripts on a variety of distros.
(closes issue ASTERISK-20945)
Reported by: Warren Selby
Tested by: Michael L. Young, Jamuel Starkey, kaldemar, Danny Nicholas, mjordan
patches:
asterisk-20945-remote-intro-msg.diff uploaded by elguero (license 5026)
ASTERISK-20945-1.8-mjordan.diff uploaded by mjordan (license 6283)
........
Merged revisions 379760 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 379777 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 379790 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@379791 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Add LDAP dev package to Debian/Ubuntu install list. Existed in Redhat already.
(issue ASTERISK-20886)
........
Merged revisions 379643 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@379644 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
'search' will look for any package containing the name provided, so we need to
force a more exact search.
........
Merged revisions 379276 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 379277 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@379278 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This provides a JSON API by pulling in and wrapping the Jansson JSON
library[1]. The Asterisk API basically mirrors the Jansson
functionality, with a few minor tweaks.
* Some names have been asteriskified to protect the innocent.
* Jansson provides both reference-stealing and reference-borrowing
versions of several API's. The Asterisk API is exclusively
reference-stealing for operations that put elements into arrays and
objects.
* No support for doubles, since we usually don't need that.
* Coming along for the ride is the ast_test_validate macro, which made
the unit tests much easier to write.
[1]: http://www.digip.org/jansson/
(issue ASTERISK-20887)
(closes issue ASTERISK-20888)
Review: https://reviewboard.asterisk.org/r/2264/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@378915 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
In ASTERISK-20726 UUID was added to Asterisk. This commit is to add the dependancies to the install script
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@378259 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
I ran this script and my build failed. pjproject requires this.
........
Merged revisions 377195 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@377196 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
(closes issue ASTERISK-20260)
Reported by: Daniel O'Connor
Patches:
ast_tls_cert-update.diff uploaded by Daniel O'Connor (license 6419)
........
Merged revisions 375325 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 375326 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 375327 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@375328 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Add Doxygen to the Debian install list. I will check for other platforms like Red Hat
(issue ASTERISK-20259)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@374897 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This patch changes the Asterisk configure script and build system to detect
the presence of the NetBSD editline library (libedit) on the system. If it is
found, it will be used in preference to the version included in the Asterisk
source tree.
(closes issue ASTERISK-18725)
Reported by: Jeffrey C. Ollie
Review: https://reviewboard.asterisk.org/r/1528/
Patches:
0001-Allow-linking-building-against-an-external-editline.patch uploaded by jcollie (license #5373) (heavily modified by kpfleming)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370481 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
contrib/scripts/live_ast currently assumes that it is being run from the
top-level directory of the source tree. It creates a script that will
also set the working directory.
This fix avoids the need to set the working directory if the caller sets
LIVE_AST_BASE_DIR instead.
It relies on realpath for that. If realpath is not available, it will
fall back to the original behaviour.
Review: https://reviewboard.asterisk.org/r/2027/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370048 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
move SQLite3.
(closes issue ASTERISK-19367)
Reported by: Andrew Latham
Patches:
debian_install_prereq.diff uploaded by Andrew Latham (license 5985)
........
Merged revisions 360138 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 360139 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@360140 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
actually remove res_ais. This commit removes it.
In addition, the 'install_prereq' script has been updated to no longer install
AIS dependency packages, and instead install Corosync packages instead.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@354459 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
be empty, don't check for it, instead of check if LD_LIBRARY_PATH is
already set and if so, append LIVE_AST_LD_PATH_EXTRA properly.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@354314 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
libasteriskssl.so at run time when using live_ast.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@354313 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@354312 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This patch includes the iLBC source code for distribution with Asterisk.
Clarification regarding the iLBC source code was provided by Google, and
the appropriate licenses have been included in the codecs/ilbc folder.
Review: https://reviewboard.asterisk.org/r/1675
Review: https://reviewboard.asterisk.org/r/1649
(closes issue: ASTERISK-18943)
Reporter: Leif Madsen
Tested by: Matt Jordan
........
Merged revisions 351450 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 351451 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@351452 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
........
r350788 | kpfleming | 2012-01-14 09:22:33 -0600 (Sat, 14 Jan 2012) | 8 lines
Ensure that two prerequisites are properly installed on Debian-style distributions.
* Don't specify a specific version of libgmime; newer versions are available
now and acceptable.
* Install libsrtp so that res_srtp can be built.
........
r350789 | kpfleming | 2012-01-14 09:23:32 -0600 (Sat, 14 Jan 2012) | 3 lines
Correct some 'set-but-not-used' variable warnings.
........
Merged revisions 350788-350789 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 350790 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@350791 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
........
r350127 | rmudgett | 2012-01-09 12:40:33 -0600 (Mon, 09 Jan 2012) | 12 lines
Update contrib script live_ast to invoke Asterisk with valgrind and suppression file.
* Added valgrind_compare script to compare two valgrind log files for
differences.
(issue ASTERISK-17339)
Reported by: Tzafrir Cohen
Patches:
valgrind_compare (license #5035) script uploaded by Tzafrir Cohen
live_ast_valgrind.diff (license #5035) patch uploaded by Tzafrir Cohen
live_ast_valgrind_v2.diff (license #5185) patch uploaded by Paul Belanger
........
r350128 | rmudgett | 2012-01-09 12:54:56 -0600 (Mon, 09 Jan 2012) | 11 lines
live_ast: valgrind: run asterisk under valgrind
Adds a new sub-command, "valgrind" to live_ast. It runs asterisk under
valgrind. The extra command-line parameters are passed to Asterisk as
usual, and parameters to valgrind are passed through LIVE_AST_VALGRIND_ARGS
in live.conf .
Review: https://reviewboard.asterisk.org/r/1109/
Merged revisions 326636 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 350127-350128 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 350129 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@350130 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Added information collection from the output of the utilities: top, free, uptime, ifconfig
Added information collection from the output of the Asterisk command 'dahdi show status'
Added option / flag '-n, --non-interactive'
Updated man page to reflect new option / flag '-n, --non-interactive'
Patch-by: John Bigelow (itzanger)
(closes issue AST-749)
........
Merged revisions 349504 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 349505 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@349506 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
environment variables and also enables a custom run directory for asterisk
(instead of defaulting to /tmp).
Patch by: Byron Clark (byronclark)
(closes ASTERISK-17810)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@348698 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r336572 | lmadsen | 2011-09-19 10:41:16 -0500 (Mon, 19 Sep 2011) | 7 lines
Update get_ilbc_source.sh script to work again.
Recently iLBC support in Asterisk has changed after the acquisition of GIPS
by Google. More information about how this may affect you is available in a
blog post at:
http://blogs.asterisk.org/2011/09/19/ilbc-support-in-asterisk-after-googles-acquisition-of-gips/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@336574 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Adds a new sub-command, "valgrind" to live_ast. It runs asterisk under
valgrind. The extra command-line parameters are passed to Asterisk as
usual, and parameters to valgrind are passed through LIVE_AST_VALGRIND_ARGS
in live.conf .
Review: https://reviewboard.asterisk.org/r/1109/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@326636 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Several variables in the script control which files are converted and the
source and destination formats.
Patch-by: Trey Blancher <support@digium.com>
(closes AST-560)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@326368 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
(closes issue #17036)
Reported by: precisenetworks
Patches:
import-cdr-csv-mysql.pl uploaded by precisenetworks (license 1010)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@317916 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r317104 | lmadsen | 2011-05-05 11:04:24 -0400 (Thu, 05 May 2011) | 15 lines
Merged revisions 317102 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r317102 | lmadsen | 2011-05-05 10:54:46 -0400 (Thu, 05 May 2011) | 8 lines
Disable console colourization inside safe_asterisk checks.
(closes issue #19213)
Reported by: lefoyer
Patches:
issue19213_strip_color_in_safe_asterisk-svn.patch uploaded by wdoekes (license 717)
Tested by: wdoekes, lefoyer
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@317105 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@303547 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r302831 | pabelanger | 2011-01-19 18:29:45 -0500 (Wed, 19 Jan 2011) | 2 lines
Add binutils-dev for BETTER_BACKTRACES
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@302832 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
change defaults to make a little more sense. Default log location is now asterisk log location and default email notification has been changed to root on the local machine
Review: https://reviewboard.asterisk.org/r/1067/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@300761 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r300430 | russell | 2011-01-04 15:00:16 -0600 (Tue, 04 Jan 2011) | 18 lines
Merged revisions 300429 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r300429 | russell | 2011-01-04 14:59:56 -0600 (Tue, 04 Jan 2011) | 11 lines
Merged revisions 300428 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r300428 | russell | 2011-01-04 14:56:04 -0600 (Tue, 04 Jan 2011) | 4 lines
Update the autosupport script from Digium support.
(closes AST-395)
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@300432 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r295404 | pabelanger | 2010-11-18 00:12:05 -0500 (Thu, 18 Nov 2010) | 2 lines
Add RedHat specific dependencies
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@295405 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r294049 | twilson | 2010-11-05 09:05:50 -0700 (Fri, 05 Nov 2010) | 2 lines
Corret spelling and example
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@294050 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r294047 | twilson | 2010-11-05 08:36:20 -0700 (Fri, 05 Nov 2010) | 2 lines
Tell people to use the correct common name for clients as well
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@294048 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r292825 | twilson | 2010-10-22 15:35:29 -0700 (Fri, 22 Oct 2010) | 4 lines
Don't create directories without at least o+x
Also, making files that you are going to modify read-only is dumb.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@292826 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r292794 | twilson | 2010-10-22 15:18:36 -0700 (Fri, 22 Oct 2010) | 2 lines
Make files readable only by the owner
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@292808 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r292787 | lmadsen | 2010-10-22 16:28:43 -0500 (Fri, 22 Oct 2010) | 21 lines
Merged revisions 292786 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r292786 | lmadsen | 2010-10-22 16:16:12 -0500 (Fri, 22 Oct 2010) | 13 lines
Update the LDIF file for LDAP.
The LDIF file asterisk.ldif was quite a bit out of date from the asterisk.ldap-schema file, so I've
now updated that to be in sync. The asterisk.ldif file being out of sync was a problem on my systems
where I was doing an ldapadd to import the schema into the LDAP database, and the existing file
would cause problems and ERROR messages when registering.
Additional documention has been added based on feedback in the issue I'm closing.
(closes issue #13861)
Reported by: scramatte
Patches:
ldap-update.txt uploaded by lmadsen (license 10)
Tested by: lmadsen, jcovert, suretec, rgenthner
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@292788 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r292740 | twilson | 2010-10-22 09:49:34 -0700 (Fri, 22 Oct 2010) | 45 lines
Add TLS cert helper script
This script is useful for quickly generating self-signed CA, server, and client
certificates for use with Asterisk. It is still recommended to obtain
certificates from a recognized Certificate Authority and to develop an
understanding how SSL certificates work. Real security is hard work.
OPTIONS:
-h Show this message
-m Type of cert "client" or "server". Defaults to server.
-f Config filename (openssl config file format)
-c CA cert filename (creates new CA cert/key as ca.crt/ca.key if not passed)
-k CA key filename
-C Common name (cert field)
For a server cert, this should be the same address that clients
attempt to connect to. Usually this will be the Fully Qualified
Domain Name, but might be the IP of the server. For a CA or client
cert, it is merely informational. Make sure your certs have unique
common names.
-O Org name (cert field)
An informational string (company name)
-o Output filename base (defaults to asterisk)
-d Output directory (defaults to the current directory)
Example:
To create a CA and a server (pbx.mycompany.com) cert with output in /tmp:
ast_tls_cert -C pbx.mycompany.com -O "My Company" -d /tmp
This will create a CA cert and key as well as asterisk.pem and the the two
files that it is made from: asterisk.crt and asterisk.key. Copy asterisk.pem
and ca.crt somewhere (like /etc/asterisk) and set tlscertfile=/etc/asterisk.pem
and tlscafile=/etc/ca.crt. Since this is a self-signed key, many devices will
require you to import the ca.crt file as a trusted cert.
To create a client cert using the CA cert created by the example above:
ast_tls_cert -m client -c /tmp/ca.crt -k /tmp/ca.key -C "Joe User" -O \
"My Company" -d /tmp -o joe_user
This will create client.crt/key/pem in /tmp. Use this if your device supports
a client certificate. Make sure that you have the ca.crt file set up as
a tlscafile in the necessary Asterisk configs. Make backups of all .key files
in case you need them later.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@292743 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r292343 | pabelanger | 2010-10-19 18:14:23 -0400 (Tue, 19 Oct 2010) | 2 lines
Add resample and imap_tk dependencies.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@292345 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r290026 | kpfleming | 2010-10-02 12:57:13 -0500 (Sat, 02 Oct 2010) | 6 lines
Allow users to pass additional arguments to the Subversion command that
obtains the MP-3 source code.
(reported on IRC by jmls)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@290027 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r280742 | russell | 2010-08-03 13:48:45 -0500 (Tue, 03 Aug 2010) | 4 lines
Remove the MP3 decoder source code and replace it with a small shell script.
Review: https://reviewboard.asterisk.org/r/836/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@280743 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r280090 | lmadsen | 2010-07-28 08:52:50 -0500 (Wed, 28 Jul 2010) | 16 lines
Merged revisions 280089 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r280089 | lmadsen | 2010-07-28 08:51:16 -0500 (Wed, 28 Jul 2010) | 9 lines
Merged revisions 280088 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r280088 | lmadsen | 2010-07-28 08:50:38 -0500 (Wed, 28 Jul 2010) | 1 line
Update help text to be less confusing.
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@280091 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@278096 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@276616 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r275909 | tilghman | 2010-07-13 09:47:30 -0500 (Tue, 13 Jul 2010) | 2 lines
Move SQL scripts into their own database-specific directories.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@275910 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
(closes issue #17628)
Reported by: lmadsen
Tested by: russell, lmadsen
Review: https://reviewboard.asterisk.org/r/774/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@275863 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@269205 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|