Age | Commit message (Collapse) | Author |
|
Support for RFC3578 overlap dialling (i.e. 484 Response to partially matched
destinations) as currently provided by chan_sip is missing from res_pjsip.
This patch adds a new endpoint attribute (allow_overlap) [defaults to yes]
which when set to yes enables 484 responses to partial destination
matches rather than the current 404.
ASTERISK-26864
Change-Id: Iea444da3ee7c7d4f1fde1d01d138a3d7b0fe40f6
|
|
A new transport parameter 'symmetric_transport' has been added.
When a request from a dynamic contact comes in on a transport with
this option set to 'yes', the transport name will be saved and used
for subsequent outgoing requests like OPTIONS, NOTIFY and INVITE.
It's saved as a contact uri parameter named 'x-ast-txp' and will
display with the contact uri in CLI, AMI, and ARI output. On the
outgoing request, if a transport wasn't explicitly set on the
endpoint AND the request URI is not a hostname, the saved transport
will be used and the 'x-ast-txp' parameter stripped from the
outgoing packet.
* config_transport was modified to accept and store the new parameter.
* config_transport/transport_apply was updated to store the transport
name in the pjsip_transport->info field using the pjsip_transport->pool
on UDP transports.
* A 'multihomed_on_rx_message' function was added to
pjsip_message_ip_updater that, for incoming requests, retrieves the
transport name from pjsip_transport->info and retrieves the transport.
If transport->symmetric_transport is set, an 'x-ast-txp' uri parameter
containing the transport name is added to the incoming Contact header.
* An 'ast_sip_get_transport_name' function was added to res_pjsip.
It takes an ast_sip_endpoint and a pjsip_sip_uri and returns a
transport name if endpoint->transport is set or if there's an
'x-ast-txp' parameter on the uri and the uri host is an ipv4 or
ipv6 address. Otherwise it returns NULL.
* An 'ast_sip_dlg_set_transport' function was added to res_pjsip
which takes an ast_sip_endpoint, a pjsip_dialog, and an optional
pjsip_tpselector. It calls ast_sip_get_transport_name() and if
a non-NULL is returned, sets the selector and sets the transport
on the dialog. If a selector was passed in, it's updated.
* res_pjsip/ast_sip_create_dialog_uac and ast_sip_create_dialog_uas
were modified to call ast_sip_dlg_set_transport() instead of their
original logic.
* res_pjsip/create_out_of_dialog_request was modified to call
ast_sip_get_transport_name() and pjsip_tx_data_set_transport()
instead of its original logic.
* Existing transport logic was removed from endpt_send_request
since that can only be called after a create_out_of_dialog_request.
* res_pjsip/ast_sip_create_rdata was converted to a wrapper around
a new 'ast_sip_create_rdata_with_contact' function which allows
a contact_uri to be specified in addition to the existing
parameters. (See below)
* res_pjsip_pubsub/internal_pjsip_evsub_send_request was eliminated
since all it did was transport selection and that is now done in
ast_sip_create_dialog_uac and ast_sip_create_dialog_uas.
* 'contact_uri' was added to subscription_persistence. This was
necessary because although the parsed rdata contact header has the
x-ast-txp parameter added (if appropriate),
subscription_persistence_update stores the raw packet which
doesn't have it. subscription_persistence_recreate was then
updated to call ast_sip_create_rdata_with_contact with the
persisted contact_uri so the recreated subscription has the
correct transport info to send the NOTIFYs.
* res_pjsip_session/internal_pjsip_inv_send_msg was eliminated since
all it did was transport selection and that is now done in
ast_sip_create_dialog_uac.
* pjsip_message_ip_updater/multihomed_on_tx_message was updated
to remove all traces of the x-ast-txp parameter from the
outgoing headers.
NOTE: This change does NOT modify the behavior of permanent
contacts specified on an aor. To do so would require that the
permanent contact's contact uri be updated with the x-ast-txp
parameter and the aor sorcery object updated. If we need to
persue this, we need to think about cloning permanent contacts into
the same store as the dynamic ones on an aor load so they can be
updated without disturbing the originally configured value.
You CAN add the x-ast-txp parameter to a permanent contact's uri
but it would be much simpler to just set endpoint->transport.
Change-Id: I4ee1f51473da32ca54b877cd158523efcef9655f
|
|
This commit adds support for RFC 5761: Multiplexing RTP Data and Control
Packets on a Single Port. Specifically, it enables the feature when
using chan_pjsip.
A new option, "rtcp_mux" has been added to endpoint configuration in
pjsip.conf. If set, then Asterisk will attempt to use rtcp-mux with
whatever it communicates with. Asterisk follows the rules set forth in
RFC 5761 with regards to falling back to standard RTCP behavior if the
far end does not indicate support for rtcp-mux.
The lion's share of the changes in this commit are in
res_rtp_asterisk.c. This is because it was pretty much hard wired to
have an RTP and an RTCP transport. The strategy used here is that when
rtcp-mux is enabled, the current RTCP transport and its trappings (such
as DTLS SSL session) are freed, and the RTCP session instead just
mooches off the RTP session. This leads to a lot of specialized if
statements throughout.
ASTERISK-26732 #close
Reported by Dan Jenkins
Change-Id: If46a93ba1282418d2803e3fd7869374da8b77ab5
|
|
This patch adds a new features to the endpoint identifier module,
'match_header'. When set, inbound requests are matched by a provided SIP
header: value pair. This option works in conjunction with the existing
'match' configuration option, such that if any 'match*' attribute
matches an inbound request, the request is associated with the specified
endpoint.
Since this module now identifies by more than just IP address,
appropriate renaming of the module and/or variables can be done in a
non-release branch.
ASTERISK-26863 #close
Change-Id: Icfc14835c962f92e35e67bbdb235cf0589de5453
(cherry picked from commit 30f52d79d7fc9ab0b628bef2b61ea515413795a2)
|
|
Forgot to install it with the original patch
Change-Id: I8bdb540a6694971ae5fe21f48d532332c6482e4c
|
|
The escalator works by creating a set of startup commands in cli.conf
that set up logger channels and issue the debug commands for the
subsystems specified. If asterisk is running when it is executed,
the same commands will be issued to the running instance. The original
cli.conf is saved before any changes are made and can be restored by
executing '$prog --reset'.
The log output will be stored in...
$astlogdir/message.$uniqueid
$astlogdir/debug.$uniqueid
$astlogdir/dtmf.$uniqueid
$astlogdir/fax.$uniqueid
$astlogdir/security.$uniqueid
$astlogdir/pjsip_history.$uniqueid
$astlogdir/sip_history.$uniqueid
Some minor tweaks were made to chan_sip, and res_pjsip_history
so their history output could be send to a log channel as packets
are captured.
A minor tweak was also made to manager so events are output to verbose
when "manager set debug on" is issued.
Change-Id: I799f8e5013b86dc5282961b27383d134bf09e543
|
|
ast_loggrabber gathers log files from customizable search patterns,
optionally converts POSIX timestamps to a readable format and
tarballs the results.
Also a few tweaks were made to ast_coredumper.
Change-Id: I8bfe1468ada24c1344ce4abab7b002a59a659495
(cherry picked from commit 5fa1c56d7e76999aa14f133a33f6b168e7c3b99c)
|
|
This utility allows easy manipulation of asterisk coredumps.
* Configurable search paths and patterns for existing coredumps
* Can generate a consistent coredump from the running instance
* Can dump the lock_infos table from a coredump
* Dumps backtraces to separate files...
- thread apply 1 bt full -> <coredump>.thread1.txt
- thread apply all bt -> <coredump>.brief.txt
- thread apply all bt full -> <coredump>.full.txt
- lock_infos table -> <coredump>.locks.txt
* Can tarball corefiles and optionally delete them after processing
* Can tarball results files and optionally delete them after processing
* Converts ':' in coredump and results file names '-' to facilitate
uploading. Jira for instance, won't accept file names with colons
in them.
Tested on Fedora24+, Ubuntu14+, Debian6+, CentOS6+ and FreeBSD9+[1].
[1] For *BSDs, the "devel/gdb" package might have to be installed to
get a recent gdb. The utility will check all instances of gdb
it finds in $PATH and if one isn't found that can run python, it
prints a friendly error.
Change-Id: I935d37ab9db85ef923f32b05579897f0893d33cd
|
|
This change implements SRV support for the IP based endpoint
identifier module. All possible addresses through SRV are looked
up and added as matches. If no SRV records are available a
fallback to normal host resolution is done. If an IP address
is provided then no SRV lookup occurs.
This is configured using the "srv_lookups" option on the
identify section and defaults to "yes".
ASTERISK-26693
Change-Id: I6b641e275bf96629320efa8b479737062aed82ac
|
|
Change-Id: I8aa55a7c3fb175235ddc7f85e9457d5102d06fa7
|
|
Change-Id: Id79e2226c31084f9252d5aede9050d3cf13322c8
|
|
|
|
When channel format changes occurred as a result of an RTP
re-negotiation the bridge was not informed this had happened.
As a result the bridge technology was not re-evaluated and the
channel may have been in a bridge technology that was incompatible
with its formats. The bridge is now unbridged and the technology
re-evaluated when this occurs.
The chan_pjsip module also allowed asymmetric codecs for sending
and receiving. This did not work with all devices and caused one
way audio problems. The default has been changed to NOT do this
but to match the sending codec to the receiving codec. For users
who want asymmetric codecs an option has been added, asymmetric_rtp_codec,
which will return chan_pjsip to the previous behavior.
The codecs returned by the chan_pjsip module when queried by
the bridge_native_rtp module were also not reflective of the
actual negotiated codecs. The nativeformats are now returned as
they reflect the actual negotiated codecs.
ASTERISK-26423 #close
Change-Id: I6ec88c6e3912f52c334f1a26983ccb8f267020dc
|
|
This change adds support for dual stack automatically. No
configuration is required and the IP address and version
in the SIP messages and SDP will be automatically changed
based on the transport over which the message is being
sent. RTP usage has also been changed to listen on both
IPv4 and IPv6 simultaneously to allow media to flow, and
to allow ICE support on both simultaneously. This also
allows failover between IPv6 and IPv4 to work as expected.
ASTERISK-26309 #close
Change-Id: I235a421d8f9a326606d861b449fa6fe3a030572d
|
|
|
|
Change-Id: I68321c4bea50730c39fdb486e5f23aeadd1ad636
|
|
cdr, config and voicemail are all separate alembic trees. Because
alembic's default is to use a table named 'alembic_version' to store
the current tree revision, the 3 trees can't exist in the same schema
without stepping on each other.
Now each tree uses 'alembic_version_<tree_name>' as the version table.
Each tree's env.py script now first checks for 'alembic_version'. If
it finds it AND its revision is in the tree's history, the script
renames it to 'alembic_version_<tree_name>'. Regardless, the script
then continues with the migration using 'alembic_version_<tree_name>'
and creates that table if it's not found. The result is that if an
existing 'alembic_version' table was found but it didn't belong to this
tree, it's left alone and 'alembic_version_<tree_name>' is used or
created.
WARNING: If multiple trees are using the same schema, they MUST NOT
CRU or D any objects with names that might exist in the other trees.
An example would be 'yesno_values' type. If two trees perform
operations on it, one tree could pull it out from under the other.
Thankfully we currently don't share any names among cdr, config and
voicemail.
NOTE: Since the env.py scripts in each tree were identical, a common
env.py has been placed in the ast-db-manage directory and a symlink
to it has been placed in each tree directory.
ASTERISK-24311 #close
Reported-by: Dafi Ni
Change-Id: I4d593f000350deb5d21a14fa1e9bc3896844d898
|
|
|
|
|
|
Map the sip.conf general section legacy_useroption_parsing to the
new pjsip.conf global ignore_uri_user_options.
ASTERISK-26316
Reported by: Kevin Harwell
Change-Id: I78108a31995db19d41f4e1a07b3324692c5363fc
|
|
This implements the chan_sip legacy_useroption_parsing option but with a
better name.
* Made the caller-id number and redirecting number strings obtained from
incoming SIP URI user fields always truncated at the first semicolon.
People don't care about anything after the semicolon showing up on their
displays even though the RFC allows the semicolon.
ASTERISK-26316 #close
Reported by: Kevin Harwell
Change-Id: Ib42b0e940dd34d84c7b14bc2e90d1ba392624f62
|
|
If you use the safe_asterisk script, it uses hardcoded defaults before
running configurable values from /etc/asterisk/startup.d. The hardcoded
default has TTY=9. Some containerized environments don't have such a
TTY, and safe_asterisk would stop.
The custom configuration from /etc/asterisk/startup.d/* isn't read until
after it stopped, so changing TTY in a custom config did not help.
This changeset changes safe_asterisk to continue if the TTY setting was
untouched and /dev/tty9 and /dev/vc/9 aren't found.
Change-Id: I2c7cdba549b77f418a0af4cb1227e8e6fe4148fc
|
|
|
|
|
|
Change-Id: I48b8e150f96a3d2a24d8fc25fbe4f5aff9f4a6b2
|
|
Change-Id: I6f30e5f9fcf8469ba0079fbf884047d54c2c0b15
|
|
Change-Id: If35174614545727817d329c60ba4456c028941b5
|
|
When using the migration script sip_to_pjsip.py, and your sip.conf is
configured with bindaddr=::, two transports are written to pjsip.conf, one for
0.0.0.0 (IPv4) and one for [::] (IPv6). That way, PJProject listens on the IPv4
and IPv6 wildcards; a IPv4/IPv6 Dual Stack configuration on a single interface
like in chan_sip.
Furthermore, the script internal functions "build_host" and "split_hostport"
did not parse Literal IPv6 addresses as expected (like [::1]:5060). This change
makes sure, even such addresses are parsed correctly.
ASTERISK-26309
Change-Id: Ia4799a0f80fc30c0550fc373efc207c3330aeb48
|
|
|
|
|
|
|
|
When using the migration script sip_to_pjsip.py, cert_file was not migrated to
pjsip.conf. A previous change regarding this contained a copy/paste error.
ASTERISK-22374
Change-Id: I0fa72e9412117d53b4284fc6b83fa5b2b95ba03b
|
|
|
|
A recent update had a copy/paste error where the unused variable 'val' was
being passed to the set_value function instead of the 'method' value itself.
This patch passes in the right variable.
ASTERISK-22374
Change-Id: I895b7b3779ce4442bc58b8ec40d59dd29bb43f06
|
|
|
|
contact_permit." into 13
|
|
|
|
|
|
|
|
|
|
into 13
|
|
|
|
When using the migration script sip_to_pjsip.py and tlsclientmethod is not set
in sip.conf, the default value of chan_sip (sslv23) is copied to pjsip.conf, to
overwrite the default of the PJProject (tlsv1). This makes sure, res_pjsip is
offering/using not just TLSv1.0 but TLSv1.2 as well.
ASTERISK-22374
Change-Id: Ie530a3dae9926ae14f3920a21be1e2edb15bda4f
|
|
When using the migration script sip_to_pjsip.py, no section of type=system or
type=general were created. Therefore the keys compactheaders, timerb, timert1,
and useragent were not migrated to pjsip.conf.
ASTERISK-22374
Change-Id: I318a453843227ea36bf130d392d4abd7bd26b5a1
|
|
When using the migration script sip_to_pjsip.py, session-timers=accept and
session-timers=refuse were mapped to wrong values.
ASTERISK-22374
Change-Id: Ie4e90d5f6a29aff07837b7fe5bc8aea5fb6fc092
|
|
When using the migration script sip_to_pjsip.py, now the (mandatory) username is
written to pjsip.conf, even if there was no (optional) authname in the register
string in sip.conf.
ASTERISK-22374
Change-Id: Ie53e1997104cd2674821688b8a8247249f5e156f
|
|
When using the migration script sip_to_pjsip.py and the register string
started with a transport in sip.conf - like tls://... - register was not parsed
correctly and therefore not migrated correctly to pjsip.conf.
ASTERISK-22374
Change-Id: I44c12104eea2bd8558ada6d25d77edfecd92edd2
|
|
When using the migration script sip_to_pjsip.py, those keys got missing. These
keys might appear several times and the function "merge_value" tried to collect
those. However, because these keys have different names in sip.conf and
pjsip.conf, "merge_value" was not able to find the new key name in sip.conf.
This change lets "merge_value" search with the old key name in sip.conf and
write with the new key name in pjsip.conf.
ASTERISK-22374
Change-Id: Ie53c5278ae6f1cb8fa7e96c5289877d46981d9d2
|
|
When using the migration script sip_to_pjsip.py, the externhost or externip of
sip.conf were erroneously written to Endpoints instead to Transports.
ASTERISK-22374
Change-Id: I2c5873386cfc388899fa9cf2368639dd12f1b8e4
|
|
When using the migration script sip_to_pjsip.py, defaultexpiry, maxexpiry, and
minexpiry were not migrated to pjsip.conf.
ASTERISK-22374
Change-Id: I007fbf543dcadc96fc3ed71c54da502bcb209b7b
|