| Age | Commit message (Collapse) | Author |
|---|
|
Remove symbols that are depreacated and replaced:
* ast_channel_datastore_alloc
* ast_channel_datastore_free
* ast_channel_cmpwhentohangup
* ast_channel_setwhentohangup
* config_text_file_save
* devstate2str
* ast_device_state_changed
* ast_device_state_changed_literal
* ast_verbose_get_by_module
Remove unused symbols:
* channelreloadreason2txt (last used in Asterisk 12).
Remove unused ast_options flags:
* AST_OPT_FLAG_END_CDR_BEFORE_H_EXTEN / ast_opt_end_cdr_before_h_exten
* AST_OPT_FLAG_VERBOSE_MODULE / ast_opt_verb_module
* AST_OPT_FLAG_INITIATED_SECONDS
Change-Id: I841255995d195f8efc1ed47af9c7a2f131c08645
|
|
GCC documentation states that when __attribute__((malloc)) is used it
should not return storage which contains any valid pointers. It
specifically mentions that realloc functions should not have the malloc
attribute, but this also means that complex initializers which could
contain initialized pointers should not use this attribute.
Change-Id: If507f33ffb3ca3b83b702196eb0e8215d27fc7d2
|
|
* ast_channel_request_stream_topology_change() must not be called with any
channel locks held.
* ast_channel_stream_topology_changed() must be called with only the
passed channel lock held.
ASTERISK-27212
Change-Id: I843de7956d9f1cc7cc02025aea3463d8fe19c691
|
|
|
|
This adds a parameter to ast_waitfordigit_full which can be used to only
stop waiting when certain expected digits are received. Any unexpected
DTMF digits are simply ignored.
This also creates a new dialplan application WaitDigit.
ASTERISK-27129 #close
Change-Id: Id233935ea3d13e71c75a0861834c5936c3700ef9
|
|
This change fixes a few things uncovered during SFU testing.
1. Unreal channels incorrectly forwarded video frames when
no video stream was present on them. This caused a crash when
they were read as the core requires a stream to exist for the
underlying media type. The Unreal channel will now ensure a
stream exists for the media type before forwarding the frame
and if no stream exists then the frame is dropped.
2. Mapping of frames during bridging from the stream number of
the underlying channel to the stream number of the bridge was
done in the wrong location. This resulted in the frame getting
dropped. This mapping now occurs on reading of the frame from
the channel.
3. Bridging was using the wrong ast_read function resulting in
it living in a non-multistream world.
4. In bridge_softmix when adding new streams to existing channels
the wrong stream topology was copied resulting in no streams
being added.
Change-Id: Ib7445722c3219951d6740802a0feddf2908c18c8
|
|
This API was not actively maintained, was not added to new modules
(such as res_pjsip), and there exist better alternatives to acquire the
same information, such as the ARI.
Change-Id: I4b2185a83aeb74798b4ad43ff8f89f971096aa83
|
|
When manipulating flags on a channel the channel has to be
locked to guarantee that nothing else is also manipulating
the flags. This change introduces locking where necessary to
guarantee this. It also adds helper functions that manipulate
channel flags and lock to reduce repeated code.
ASTERISK-26789
Change-Id: I489280662dba0f4c50981bfc5b5a7073fef2db10
|
|
When using the Bridge AMI action on the same channel multiple times
it was possible for the channel to return to the wrong location in
the dialplan if the other party hung up. This happened because the
priority of the channel was not preserved across each action
invocation and it would fail to move on to the next priority in
other cases.
This change makes it so that the priority of a channel is preserved
when taking control of it from another thread and it is incremented
as appropriate such that the priority reflects where the channel
should next be executed in the dialplan, not where it may or may not
currently be.
The Bridge AMI action was also changed to ensure that it too
starts the channels at the next location in the dialplan.
ASTERISK-24529
Change-Id: I52406669cf64208aef7252a65b63ade31fbf7a5a
|
|
This patch is the first cut at adding stream support to the bridging framework.
Changes were made to the framework that allows mapping of stream topologies to
a bridge's supported media types.
The first channel to enter a bridge initially defines the media types for a
bridge (i.e. a one to one mapping is created between the bridge and the first
channel). Subsequently added channels merge their media types into the bridge's
adding to it when necessary. This allows channels with different sized
topologies to map correctly to each other according to media type. The bridge
drops any frame that does not have a matching index into a given write stream.
For now though, bridge_simple will align its two channels according to size or
first to join. Once both channels join the bridge the one with the most streams
will indicate to the other channel to update its streams to be the same as that
of the other. If both channels have the same number of streams then the first
channel to join is chosen as the stream base.
A topology change source was also added to a channel when a stream toplogy
change request is made. This allows subsystems to know whether or not they
initiated a change request. Thus avoiding potential recursive situations.
ASTERISK-26966 #close
Change-Id: I1eb5987921dd80c3cdcf52accc136393ca2d4163
|
|
topology."
|
|
This change extends the ast_request functionality by adding another
function and callback to create an outgoing channel with a requested
stream topology. Fallback is provided by either converting the
requested stream topology into a format capabilities structure if
the channel driver does not support streams or by converting the
requested format capabilities into a stream topology if the channel
driver does support streams.
The Dial application has also been updated to request an outgoing
channel with the stream topology of the calling channel.
ASTERISK-26959
Change-Id: Ifa9037a672ac21d42dd7125aa09816dc879a70e6
|
|
The primary win of switching to eventfd when possible is that it only
uses a single file descriptor while pipe() will use two. This means for
each bridge channel we're reducing the number of required file
descriptors by 1, and - if you're using timerfd - we also now have 1
less file descriptor per Asterisk channel.
The API is not ideal (passing int arrays), but this is the cleanest
approach I could come up with to maintain API/ABI.
I've also removed what I believe to be an erroneous code block that
checked the non-blocking flag on the pipe ends for each read. If the
file descriptor is 'losing' its non-blocking mode, it is because of a
bug somewhere else in our code.
In my testing I haven't seen any measurable difference in performance.
Change-Id: Iff0fb1573e7f7a187d5211ddc60aa8f3da3edb1d
|
|
The ast_json structure is used in many Asterisk headers and is often the
only part of json.h used. This adds a forward declaration to asterisk.h
and removes the include of json.h from many headers. The declaration
has been left in endpoints.h and stasis.h to avoid problems with source
files that use ast_json functions without directly including json.h.
ari.h continues to include json.h as it uses enum
ast_json_encoding_format.
Change-Id: Id766aabce6bed56626d27e8d29f559b5e687b769
|
|
This change removes the old epoll support which has not been used or
maintained in quite some time.
The fixed number of file descriptors on a channel has also been removed.
File descriptors are now contained in a growable vector. This can be
used like before by specifying a specific position to store a file
descriptor at or using a new API call, ast_channel_fd_add, which adds
a file descriptor to the channel and returns its position.
Tests have been added which cover the growing behavior of the vector
and the new API call.
ASTERISK-26885
Change-Id: I1a754b506c009b83dfdeeb08c2d2815db30ef928
|
|
This change adds a few things to facilitate stream topology changing:
1. Control frame types have been added for use by the channel driver
to notify the application that the channel wants to change the stream
topology or that a stream topology change has been accepted. They are
also used by the indicate interface to the channel that the application
uses to indicate it wants to do the same.
2. Legacy behavior has been adopted in ast_read() such that if a
channel requests a stream topology change it is denied automatically
and the current stream topology is preserved if the application is
not capable of handling streams.
Tests have also been written which confirm the multistream and
non-multistream behavior.
ASTERISK-26839
Change-Id: Ia68ef22bca8e8457265ca4f0f9de600cbcc10bc9
|
|
* Removed the AST_CHAN_TP_MULTISTREAM tech property. We now rely
on read_stream being set to indicate a multi stream channel.
* Added ast_channel_is_multistream convenience function.
* Fixed issue where stream and default_stream weren't being set on
a frame retrieved from the queue.
* Now testing for NULL being returned from the driver's read or
read_stream callback.
* Fixed issue where the dropnondefault code was crashing on a
NULL f.
* Now enforcing that if either read_stream or write_stream are
set when ast_channel_tech_set is called that BOTH are set.
* Added the unit tests.
ASTERISK-26816
Change-Id: If7792b20d782e71e823dabd3124572cf0a4caab2
|
|
This change introduces an ast_read_stream function and callback in
the channel technology which allows reading frames from all streams
and not just the default streams.
The stream number has also been added to frames. This is to allow the
case where frames are queued onto the channel instead of being read
directly from the driver.
This change does impose a restriction on reading though: a chain of
frames can only contain frames from the same stream.
ASTERISK-26816
Change-Id: I5d7dc35e86694df91fd025126f6cfe0453aa38ce
|
|
This change adds an ast_write_stream function which allows
writing a frame to a specific media stream. It also moves
ast_write() to using this underneath by writing media
frames provided to it to the default streams of the channel.
Existing functionality (such as audiohooks, framehooks, etc)
are limited to being applied to the default stream only.
Unit tests have also been added which test the behavior of
both non-multistream and multistream channels to confirm that
the write() and write_stream() callbacks are invoked
appropriately.
ASTERISK-26793
Change-Id: I4df20d1b65bd4d787fce0b4b478e19d2dfea245c
|
|
Adds topology set and get to channel.
ASTERISK-26790
Change-Id: Ic379ea82a9486fc79dbd8c4d95c29fa3b46424f4
|
|
A dialplan intercept routine is equivalent to an interrupt routine. As
such, the routine must be done quickly and you do not have access to the
media stream. These restrictions are necessary because the media stream
is the responsibility of some other code and interfering with or delaying
that processing is bad. A possible future dialplan processing
architecture change may allow the interception routine to run in a
different thread from the main thread handling the media and remove the
execution time restriction.
* Made res_agi.c:run_agi() running an AGI in an interception routine run
in DeadAGI mode. No touchy channel frames.
ASTERISK-25951
ASTERISK-26343
ASTERISK-26716
Change-Id: I638f147ca7a7f2590d7194a8ef4090eb191e4e43
|
|
There are several issues with deferring frames that are caused by the
refactoring.
1) The code deferring frames mishandles adding a deferred frame to the
deferred queue. As a result the deferred queue can only be one frame
long.
2) Deferrable frames can come directly from the channel driver as well as
the read queue. These frames need to be added to the deferred queue.
3) Whoever is deferring frames is really only doing the __ast_read() to
collect deferred frames and doesn't care about the returned frames except
to detect a hangup event. When frame deferral is completed we must make
the normal frame processing see the hangup as a frame anyway. As such,
there is no need to have varying hangup frame deferral methods. We also
need to be aware of the AST_SOFTHANGUP_ASYNCGOTO hangup that isn't real.
That fake hangup is to cause the PBX thread to break out of loops to go
execute a new dialplan location.
4) To properly deal with deferrable frames from the channel driver as
pointed out by (2) above, means that it is possible to process a dialplan
interception routine while frames are deferred because of the
AST_CONTROL_READ_ACTION control frame. Deferring frames is not
implemented as a re-entrant operation so you could have the unsupported
case of two sections of code thinking they have control of the media
stream.
A worse problem is because of the bad implementation of the AMI PlayDTMF
action. It can cause two threads to be deferring frames on the same
channel at the same time. (ASTERISK_25940)
* Rather than fix all these problems simply revert the API refactoring as
there is going to be only autoservice and safe_sleep deferring frames
anyway.
ASTERISK-26343
ASTERISK-26716 #close
Change-Id: I45069c779aa3a35b6c863f65245a6df2c7865496
|
|
ASTERISK-25083
Change-Id: Id54baa57a8dbca84e29f28bcd2ffc0a5ac12d8b2
|
|
The sending codec is switched to the receiving codec and then
is switched back to the best native codec on EVERY receiving RTP packets.
This is because after call of ast_channel_set_rawwriteformat there is call
of ast_set_write_format which calls set_format which sets rawwriteformat
to the best native format.
This patch adds a new function ast_set_write_format_path which set
specific write path on channel and uses this function to switch
the sending codec.
ASTERISK-26603 #close
Change-Id: I5b7d098f8b254ce8f45546e6c36e5d324737f71d
|
|
|
|
|
|
ASTERISK-26343
Change-Id: I06dbf7366e26028251964143454a77d017bb61c8
(cherry picked from commit 0be46aaf6b8b9eb5b0160ec591cdc2c6e1802a6d)
|
|
This reverts commit fa749866c17f91860d3e9f89742eab3e6f03ecbc.
Change-Id: Idcd1b88fa0766b1326dcc87d8905dbc314c71bd7
|
|
This works the same as for AMI manager variables. Set
"channelvars=foo,bar" in your ari.conf general section, and then the
channel variables "foo" and "bar" (along with their values), will
appear in every Stasis websocket channel event.
ASTERISK-26492 #close
patches:
ari_vars.diff submitted by Mark Michelson
Change-Id: I5609ba239259577c0948645df776d7f3bc864229
|
|
This reverts commit f073f648b87d45e4729969fd2d83695c300757d1.
Multiple testsuite failures were detected after the fact.
Change-Id: I968c380418bf65c7166f6ecff30fe8e247ea6682
|
|
There are several places in Asterisk that have duplicated logic
for deferring important frames until later.
This commit adds a couple of API calls to facilitate this automatically.
ast_channel_start_defer_frames(): Future reads of deferrable frames on
this channel will be deferred until later.
ast_channel_stop_defer_frames(): Any frames that have been deferred get
requeued onto the channel.
ASTERISK-26343
Change-Id: I3e1b87bc6796f222442fa6f7d1b6a4706fb33641
|
|
ARI and AMI allow for an explicit channel ID to be specified
when originating channels. Unfortunately, there is nothing in
place to prevent someone from using the same ID for multiple
channels. Further complicating things, adding ID validation to channel
allocation makes it impossible for ARI to discern why channel allocation
failed, resulting in a vague error code being returned.
The fix for this is to institute a new method for channel errors to be
discerned. The method mirrors errno, in that when an error occurs, the
caller can consult the channel errno value to determine what the error
was. This initial iteration of the feature only introduces "unknown" and
"channel ID exists" errors. However, it's possible to add more errors as
needed.
ARI uses this feature to determine why channel allocation failed and can
return a 409 error during origination to show that a channel with the
given ID already exists.
ASTERISK-26421
Change-Id: Ibba7ae68842dab6df0c2e9c45559208bc89d3d06
|
|
|
|
Asterisk only supports mono audio at the moment.
This patch adds interleaved two-channel audio to Asterisk's channels.
ASTERISK-26292
Change-Id: I7a547cea0fd3c6d1e502709d9e7e39605035757a
|
|
ast_channel_get_t38_state() calls ast_channel_queryoption() with
AST_OPTION_T38_STATE. If the passed in channel is a local channel then a
deadlock can happen if a channel lock is held when called.
* Made ast_channel_get_t38_state() callers not hold a channel lock before
calling.
* Update ast_channel_get_t38_state() doxygen to note that no channel locks
can be held when calling the function.
ASTERISK-26203 #close
Reported by: Etienne Lessard
ASTERISK-24822 #close
Reported by: David Brillert
ASTERISK-22732 #close
Reported by: Richard Mudgett
Change-Id: I49fd76fa9af628b4198009b5c0b82c8b03681214
|
|
ASTERISK-25582
Change-Id: I69451920b122de7ee18d15bb231c80ea7067a22b
|
|
This increases the maximum length of account code's to match
extensions. This ensures it is always possible to set an
accountcode to ${EXTEN} without truncation.
ASTERISK-23904
Reported by: Ben Merrills
Change-Id: If122602304ce03362722eb213a3111b32da5eeb9
|
|
A few cases exist where headers of optional_api provders are included but
not needed. This causes unneeded calls to ast_optional_api_use.
* Don't include optional_api.h from sip_api.h.
* Move 'struct ast_channel_monitor' to channel.h.
* Don't include monitor.h from chan_sip.c, channel.c or features.c.
The move of struct ast_channel_monitor is needed since channel.c depends on
it. This has no effect on users of monitor.h since channel.h is included
from monitor.h.
ASTERISK-25051 #close
Reported by: Corey Farrell
Change-Id: I53ea65a9fc9693c89f8bcfd6120649bfcfbc3478
|
|
Change-Id: Ie584b85e16a94c255e60d0b1732ef9686464fef3
|
|
* The REF_DEBUG compiler flag no longer has any effect on code that uses
Astobj2. It is used to determine if reference debugging is enabled by
default. Reference debugging can be enabled or disabled in asterisk.conf.
* Caller information is provided in logger errors for ao2 bad magic numbers.
* Optimizes AO2 by merging internal functions with the public counterpart.
This was possible now that we no longer require a dual ABI.
ASTERISK-24974 #close
Reported by: Corey Farrell
Change-Id: Icf3552721fe999365ba8a8cf00a965aa6b897cc1
|
|
With this patch, chan_pjsip/res_pjsip now sets the native formats to the
codecs negotiated by a call.
* The changes in chan_pjsip.c and res_pjsip_sdp_rtp.c set the native
formats to include all the negotiated audio codecs instead of only the
initial preferred audio codec and later the currently received audio
codec.
* The audio frame handling in channel.c:ast_read() is more streamlined and
will automatically adjust to changes in received frame formats. The new
policy is to remove translation and pass the new frame format to the
receiver except if the translation was to a signed linear format. A more
long winded version is commented in ast_read() along with some caveats.
* The audio frame handling in channel.c:ast_write() is more streamlined
and will automatically adjust any needed translation to changes in the
frame formats sent. Frame formats sent can change for many reasons such
as a recording is being played back or the bridged peer changed the format
it sends. Since it is a normal expectation that sent formats can change,
the codec mismatch warning message is demoted to a debug message.
* Removed the short circuit check in
channel.c:ast_channel_make_compatible_helper(). Two party bridges need to
make channels compatible with each other. However, transfers and moving
channels among bridges can result in otherwise compatible channels having
sub-optimal translation paths if the make compatible check is short
circuited. A result of forcing the reevaluation of channel compatibility
is that the asterisk.conf:transcode_via_slin and codecs.conf:genericplc
options take effect consistently now. It is unfortunate that these two
options are enabled by default and negate some of the benefits to the
changes in channel.c:ast_read() by forcing translation through signed
linear on a two party bridge.
* Improved the softmix bridge technology to better control the translation
of frames to the bridge. All of the incoming translation is now normally
handled by ast_read() instead of splitting any translation steps between
ast_read() and the slin factory. If any frame comes in with an unexpected
format then the translation path in ast_read() is updated for the next
frame and the slin factory handles the current frame translation.
This is the final patch in a series of patches aimed at improving
translation path choices. The other patches are on the following reviews:
https://reviewboard.asterisk.org/r/4600/
https://reviewboard.asterisk.org/r/4605/
ASTERISK-24841 #close
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/4609/
........
Merged revisions 434671 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@434672 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Switch logger callid's from AO2 objects to simple integers.
This helps in two ways. Copying integers is faster than
referencing AO2 objects, so this will result in a small
reduction in logger overhead. This also erases the possibility
of an infinate loop caused by an invalid callid in
threadstorage.
ASTERISK-24833 #comment Committed callid conversion to trunk.
Reported by: Corey Farrell
Review: https://reviewboard.asterisk.org/r/4466/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@432834 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
There are three CLI commands to stop and restart Asterisk each.
1) core stop/restart now - Hangup all calls and stop or restart Asterisk.
New channels are prevented while the shutdown request is pending.
2) core stop/restart gracefully - Stop or restart Asterisk when there are
no calls remaining in the system. New channels are prevented while the
shutdown request is pending.
3) core stop/restart when convenient - Stop or restart Asterisk when there
are no calls in the system. New calls are not prevented while the
shutdown request is pending.
ARI has made stopping/restarting Asterisk more problematic. While a
shutdown request is pending it is desirable to continue to process ARI
HTTP requests for current calls. To handle the current calls while a
shutdown request is pending, a new committed to shutdown phase is needed
so ARI applications can deal with the calls until the system is fully
committed to shutdown.
* Added a new shutdown committed phase so ARI applications can deal with
calls until the final committed to shutdown phase is reached.
* Made refuse new HTTP requests when the system has reached the final
system shutdown phase. Starting anything while the system is actively
releasing resources and unloading modules is not a good thing.
* Split the bridging framework shutdown to not cleanup the global bridging
containers when shutting down in a hurry. This is similar to how other
modules prevent crashes on rapid system shutdown.
* Moved ast_begin_shutdown(), ast_cancel_shutdown(), and
ast_shutting_down(). You should not have to include channel.h just to
access these system functions.
ASTERISK-24752 #close
Reported by: Matthew Jordan
Review: https://reviewboard.asterisk.org/r/4399/
........
Merged revisions 431692 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@431694 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
........
Merged revisions 430996 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 430998 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@431000 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This patch adds the ability for channel drivers to supply presence information
in a similar manner to device state. The patch does not provide any channel
driver implementations, but it does provide the core infrastructure necessary
for channel drivers to provide such information.
The core handles multiple providers of presence state information. Ordering
of presence state is as follows:
INVALID < NOT_SET < AVAILABLE < UNAVAILABLE < CHAT < AWAY < XA < DND
Each provider can trump the previous if it provides a presence state that
supercedes a previous one.
Review: https://reviewboard.asterisk.org/r/4050
ASTERISK-24363 #close
Reported by: Gareth Palmer
patches:
chan_presencestate-428146.patch uploaded by Gareth Palmer (License 5169)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@429967 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This corrects several bugs that currently exist in the stasis
application code.
* After a masquerade, the resulting channels have channel topics that
do not match their uniqueids
** Masquerades now swap channel topics appropriately
* StasisStart and StasisEnd messages are leaked to observer
applications due to being published on channel topics
** StasisStart and StasisEnd publishing is now properly restricted
to controlling apps via app topics
* Race conditions exist where StasisStart and StasisEnd messages due to
a masquerade may be received out of order due to being published on
different topics
** These messages are now published directly on the app topic so this
is now a non-issue
* StasisEnds are sometimes missing when sent due to masquerades and
bridge swaps into and out of Stasis()
** This was due to StasisEnd processing adjusting message-sent flags
after Stasis() had already exited and Stasis() had been re-entered
** This was corrected by adjusting these flags prior to sending the
message while the initial Stasis() application was still shutting
down
Review: https://reviewboard.asterisk.org/r/4213/
ASTERISK-24537 #close
Reported by: Matt DiMeo
........
Merged revisions 429061 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 429062 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@429063 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
The context/extension in a CDR is generally considered the destination of a
call. When looking at a 2-party call CDR, users will typically be presented
with the following:
context exten channel dest_channel app data
default 1000 SIP/8675309 SIP/1000 Dial SIP/1000,,20
However, if the Dial actually takes place in a Macro, the current behaviour
in 12 will result in the following CDR:
context exten channel dest_channel app data
macro-dial s SIP/8675309 SIP/1000 Dial SIP/1000,,20
The same is true of a GoSub:
context exten channel dest_channel app data
subs dial_stuff SIP/8675309 SIP/1000 Dial SIP/1000,,20
This generally makes the context/exten fields less than useful.
It isn't hard to preserve these values in the CDR state machine; however, we
need to have something that informs us when a channel is executing a
subroutine. Prior to this patch, there isn't anything that does this.
This patch solves this problem by adding a new channel flag,
AST_FLAG_SUBROUTINE_EXEC. This flag is set on a channel when it executes a
Macro or a GoSub. The CDR engine looks for this value when updating a Party A
snapshot; if the flag is present, we don't override the context/exten on the
main CDR object. In a funny quirk, executing a hangup handler must *not* abide
by this logic, as the endbeforehexten logic assumes that the user wants to see
data that occurs in hangup logic, which includes those subroutines. Since
those execute outside of a typical Dial operation (and will typically have
their own dedicated CDR anyway), this is unlikely to cause any heartburn.
Review: https://reviewboard.asterisk.org/r/3962/
ASTERISK-24254 #close
Reported by: tm1000, Tony Lewis
Tested by: Tony Lewis
........
Merged revisions 422718 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 422719 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@422720 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
If a manager or CLI user attached a mixmonitor to a call running a dynamic
bridge feature while in a bridge, the feature would be interrupted and the
channel would be forcibly kicked out of the bridge (usually ending the call
during a simple 1 to 1 call). This would also occur during any similar action
that could set the unbridge soft hangup flag, so the fix for this was to
remove unbridge from the soft hangup flags and make it a separate thing all
together.
ASTERISK-24027 #close
Reported by: mjordan
Review: https://reviewboard.asterisk.org/r/3900/
........
Merged revisions 420934 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 420940 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@420947 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
The previous behavior was to simply set the accountcode of an outgoing
channel to the accountcode of the channel initiating the call. It was
done this way a long time ago to allow the accountcode set on the SIP/100
channel to be propagated to a local channel so the dialplan execution on
the Local;2 channel would have the SIP/100 accountcode available.
SIP/100 -> Local;1/Local;2 -> SIP/200
Propagating the SIP/100 accountcode to the local channels is very useful.
Without any dialplan manipulation, all channels in this call would have
the same accountcode.
Using dialplan, you can set a different accountcode on the SIP/200 channel
either by setting the accountcode on the Local;2 channel or by the Dial
application's b(pre-dial), M(macro) or U(gosub) options, or by the
FollowMe application's b(pre-dial) option, or by the Queue application's
macro or gosub options. Before Asterisk v12, the altered accountcode on
SIP/200 will remain until the local channels optimize out and the
accountcode would change to the SIP/100 accountcode.
Asterisk v1.8 attempted to add peeraccount support but ultimately had to
punt on the support. The peeraccount support was rendered useless because
of how the CDR code needed to unconditionally force the caller's
accountcode onto the peer channel's accountcode. The CEL events were thus
intentionally made to always use the channel's accountcode as the
peeraccount value.
With the arrival of Asterisk v12, the situation has improved somewhat so
peeraccount support can be made to work. Using the indicated example, the
the accountcode values become as follows when the peeraccount is set on
SIP/100 before calling SIP/200:
SIP/100 ---> Local;1 ---- Local;2 ---> SIP/200
acct: 100 \/ acct: 200 \/ acct: 100 \/ acct: 200
peer: 200 /\ peer: 100 /\ peer: 200 /\ peer: 100
If a channel already has an accountcode it can only change by the
following explicit user actions:
1) A channel originate method that can specify an accountcode to use.
2) The calling channel propagating its non-empty peeraccount or its
non-empty accountcode if the peeraccount was empty to the outgoing
channel's accountcode before initiating the dial. e.g., Dial and
FollowMe. The exception to this propagation method is Queue. Queue will
only propagate peeraccounts this way only if the outgoing channel does not
have an accountcode.
3) Dialplan using CHANNEL(accountcode).
4) Dialplan using CHANNEL(peeraccount) on the other end of a local
channel pair.
If a channel does not have an accountcode it can get one from the
following places:
1) The channel driver's configuration at channel creation.
2) Explicit user action as already indicated.
3) Entering a basic or stasis-mixing bridge from a peer channel's
peeraccount value.
You can specify the accountcode for an outgoing channel by setting the
CHANNEL(peeraccount) before using the Dial, FollowMe, and Queue
applications. Queue adds the wrinkle that it will not overwrite an
existing accountcode on the outgoing channel with the calling channels
values.
Accountcode and peeraccount values propagate to an outgoing channel before
dialing. Accountcodes also propagate when channels enter or leave a basic
or stasis-mixing bridge. The peeraccount value only makes sense for
mixing bridges with two channels; it is meaningless otherwise.
* Made peeraccount functional by changing accountcode propagation as
described above.
* Fixed CEL extracting the wrong ie value for the peeraccount. This was
done intentionally in Asterisk v1.8 when that version had to punt on
peeraccount.
* Fixed a few places dealing with accountcodes that were reading from
channels without the lock held.
AFS-65 #close
Review: https://reviewboard.asterisk.org/r/3601/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@419520 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This patch serves two purposes:
(1) It fixes some bugs with endpoint subscriptions not reporting all of the
channel events
(2) It serves as the preliminary work needed for ASTERISK-23692, which allows
for sending/receiving arbitrary out of call text messages through ARI in a
technology agnostic fashion.
The messaging functionality described on ASTERISK-23692 requires two things:
(1) The ability to send/receive messages associated with an endpoint. This is
relatively straight forwards with the endpoint core in Asterisk now.
(2) The ability to send/receive messages associated with a technology and an
arbitrary technology defined URI. This is less straight forward, as
endpoints are formed from a tech + resource pair. We don't have a
mechanism to note that a technology that *may* have endpoints exists.
This patch provides such a mechanism, and fixes a few bugs along the way.
The first major bug this patch fixes is the forwarding of channel messages
to their respective endpoints. Prior to this patch, there were two problems:
(1) Channel caching messages weren't forwarded. Thus, the endpoints missed
most of the interesting bits (such as channel creation, destruction, state
changes, etc.)
(2) Channels weren't associated with their endpoint until after creation.
This resulted in endpoints missing the channel creation message, which
limited the usefulness of the subscription in the first place (a major use
case being 'tell me when this endpoint has a channel'). Unfortunately,
this meant another parameter to ast_channel_alloc. Since not all channel
technologies support an ast_endpoint, this patch makes such a call
optional and opts for a new function, ast_channel_alloc_with_endpoint.
When endpoints are created, they will implicitly create a technology endpoint
for their technology (if one does not already exist). A technology endpoint is
special in that it has no state, cannot have channels created for it, cannot
be created explicitly, and cannot be destroyed except on shutdown. It does,
however, have all messages from other endpoints in its technology forwarded to
it.
Combined with the bug fixes, we now have Stasis messages being properly
forwarded. Consider the following scenario: two PJSIP endpoints (foo and bar),
where bar has a single channel associated with it and foo has two channels
associated with it. The messages would be forwarded as follows:
channel PJSIP/foo-1 --
\
--> endpoint PJSIP/foo --
/ \
channel PJSIP/foo-2 -- \
---- > endpoint PJSIP
/
channel PJSIP/bar-1 -----> endpoint PJSIP/bar --
ARI, through the applications resource, can:
- subscribe to endpoint:PJSIP/foo and get notifications for channels
PJSIP/foo-1,PJSIP/foo-2 and endpoint PJSIP/foo
- subscribe to endpoint:PJSIP/bar and get notifications for channels
PJSIP/bar-1 and endpoint PJSIP/bar
- subscribe to endpoint:PJSIP and get notifications for channels
PJSIP/foo-1,PJSIP/foo-2,PJSIP/bar-1 and endpoints PJSIP/foo,PJSIP/bar
Note that since endpoint PJSIP never changes, it never has events itself. It
merely provides an aggregation point for all other endpoints in its technology
(which in turn aggregate all channel messages associated with that endpoint).
This patch also adds endpoints to res_xmpp and chan_motif, because the actual
messaging work will need it (messaging without XMPP is just sad).
Review: https://reviewboard.asterisk.org/r/3760/
ASTERISK-23692
........
Merged revisions 419196 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@419203 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
