Age | Commit message (Collapse) | Author |
|
From Reviewboard:
CCSS stands for Call Completion Supplementary Services. An admittedly out-of-date
overview of the architecture can be found in the file doc/CCSS_architecture.pdf
in the CCSS branch. Off the top of my head, the big differences between what is
implemented and what is in the document are as follows:
1. We did not end up modifying the Hangup application at all.
2. The document states that a single call completion monitor may be used across
multiple calls to the same device. This proved to not be such a good idea
when implementing protocol-specific monitors, and so we ended up using one
monitor per-device per-call.
3. There are some configuration options which were conceived after the document
was written. These are documented in the ccss.conf.sample that is on this
review request.
For some basic understanding of terminology used throughout this code, see the
ccss.tex document that is on this review.
This implements CCBS and CCNR in several flavors.
First up is a "generic" implementation, which can work over any channel technology
provided that the channel technology can accurately report device state. Call
completion is requested using the dialplan application CallCompletionRequest and can
be canceled using CallCompletionCancel. Device state subscriptions are used in order
to monitor the state of called parties.
Next, there is a SIP-specific implementation of call completion. This method uses the
methods outlined in draft-ietf-bliss-call-completion-06 to implement call completion
using SIP signaling. There are a few things to note here:
* The agent/monitor terminology used throughout Asterisk sometimes is the reverse of
what is defined in the referenced draft.
* Implementation of the draft required support for SIP PUBLISH. I attempted to write
this in a generic-enough fashion such that if someone were to want to write PUBLISH
support for other event packages, such as dialog-state or presence, most of the effort
would be in writing callbacks specific to the event package.
* A subportion of supporting PUBLISH reception was that we had to implement a PIDF
parser. The PIDF support added is a bit minimal. I first wrote a validation
routine to ensure that the PIDF document is formatted properly. The rest of the
PIDF reading is done in-line in the call-completion-specific PUBLISH-handling
code. In other words, while there is PIDF support here, it is not in any state
where it could easily be applied to other event packages as is.
Finally, there are a variety of ISDN-related call completion protocols supported. These
were written by Richard Mudgett, and as such I can't really say much about their
implementation. There are notes in the CHANGES file that indicate the ISDN protocols
over which call completion is supported.
Review: https://reviewboard.asterisk.org/r/523
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@256528 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r205409 | dvossel | 2009-07-08 16:35:12 -0500 (Wed, 08 Jul 2009) | 6 lines
moving ast_devstate_to_extenstate to pbx.c from devicestate.c
ast_devstate_to_extenstate belongs in pbx.c. This change
fixes a compile time error with chan_vpb as well.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@205412 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r204681 | dvossel | 2009-07-02 10:05:57 -0500 (Thu, 02 Jul 2009) | 14 lines
Improved mapping of extension states from combined device states.
This fixes a few issues with incorrect extension states and adds
a cli command, core show device2extenstate, to display all possible
state mappings.
(closes issue #15413)
Reported by: legart
Patches:
exten_helper.diff uploaded by dvossel (license 671)
Tested by: dvossel, legart, amilcar
Review: https://reviewboard.asterisk.org/r/301/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@204710 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
(closes issue #14413)
Reported by: pj
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@203702 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r199297 | dvossel | 2009-06-05 16:19:56 -0500 (Fri, 05 Jun 2009) | 14 lines
Fixes issue with hints giving unexpected results.
Hints with two or more devices that include ONHOLD gave unexpected results.
(closes issue #15057)
Reported by: p_lindheimer
Patches:
onhold_trunk.diff uploaded by dvossel (license 671)
pbx.c.1.4.patch uploaded by p (license 558)
devicestate.c.trunk.patch uploaded by p (license 671)
Tested by: p_lindheimer, dvossel
Review: https://reviewboard.asterisk.org/r/254/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@199298 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This code comes from svn/asterisk/team/russell/event_performance/.
Here is a summary of the changes that have been made, in order of both
invasiveness and performance impact, from smallest to largest.
1) Asterisk 1.6.1 introduces some additional logic to be able to handle
distributed device state. This functionality comes at a cost.
One relatively minor change in this patch is that the extra processing
required for distributed device state is now completely bypassed if
it's not needed.
2) One of the things that I noticed when profiling this code was that a
_lot_ of time was spent doing string comparisons. I changed the way
strings are represented in an event to include a hash value at the front.
So, before doing a string comparison, we do an integer comparison on the
hash.
3) Finally, the code that handles the event cache has been re-written.
I tried to do this in a such a way that it had minimal impact on the API.
I did have to change one API call, though - ast_event_queue_and_cache().
However, the way it works now is nicer, IMO. Each type of event that
can be cached (MWI, device state) has its own hash table and rules for
hashing and comparing objects. This by far made the biggest impact on
performance.
For additional details regarding this code and how it was tested, please see the
review request.
(closes issue #14738)
Reported by: russell
Review: http://reviewboard.digium.com/r/205/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@184339 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Copied from my review board description:
This is a continuation of the API changes documentation started for describing
changes between releases. Most of the API changes were pretty simple needing
only to be brought to attention via the new "Asterisk API Changes" list.
However, if you see anything that needs further explanation feel free to
supplement what is there. The current method of documenting is to add (in the
header file): \version <ver number> <description of changes> and then to add
the function to the change list in doxyref.h on the AstAPIChanges page. I also
made sure all the functions that were newly added were tagged with \since
1.6.1. I think this is a good habit to start both for the historical aspect as
well as for the future ability to easily add a "New Asterisk API" page.
Review: http://reviewboard.digium.com/r/190/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@180719 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
------------------------------------------------------------------------
r159808 | kpfleming | 2008-11-29 10:58:29 -0600 (Sat, 29 Nov 2008) | 7 lines
update dev-mode compiler flags to match the ones used by default on Ubuntu Intrepid, so all developers will see the same warnings and errors
since this branch already had some printf format attributes, enable checking for them and tag functions that didn't have them
format attributes in a consistent way
------------------------------------------------------------------------
in addition:
move some format attributes from main/utils.c to the header files they belong in, and fix up references to the relevant functions based on new compiler warnings
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@159818 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
and config_text_file_save to have an ast_ prefix
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@154260 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@133860 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
to document arguments seems logical, and does work, but is not the best
thing to use.
\arg in doxygen is simply for creating non-nested unordered lists. \param is
the correct tag to use to document function parameters, and will come out
better in the generated documentation.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@127401 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This commit breaks out some logic from pbx.c into a simple API. The hint
processing code had logic for taking the state from multiple devices and
turning that into the state for a single extension. So, I broke this out
and made an API that lets you take multiple device states and determine
the aggregate device state. I needed this for some core device state changes
to support distributed device state.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@121501 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@92285 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
found by showing a very poor example doxygen function in a presentation this
morning. :)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@83819 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Closes issue #10654, patch by snuffy
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@81560 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
The way a device state change propagates is kind of silly, in my opinion. A
device state provider calls a function that indicates that the state of a
device has changed. Then, another thread goes back and calls a callback for
the device state provider to find out what the new state is before it can go
send it off to whoever cares.
I have changed it so that you can include the state that the device has changed
to in the first function call from the device state provider. This removes the
need to have to call the callback, which locks up critical containers to go find
out what the state changed to.
This change set changes the "simple" device state providers to use the new method.
This includes parking, meetme, and SLA.
I have also mostly converted chan_agent in my branch, but still have some more
things to think through before presenting the plan for converting channel drivers
to ensure all of the right events get generated ...
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@79027 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
use the \retval tag for documenting return values, fixing various warnings
when generating the documentation, and various other things.
(closes issue #10203, snuffy)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@75164 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
(issue #9842, snuffy)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@68339 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
places that cared about device states were app_queue and the hint code in pbx.c.
The changes include converting it to use the Asterisk event system, as well as
other efficiency improvements.
* app_queue: This module used to register a callback into devicestate.c to
monitor device state changes. Now, it is just a subscriber to Asterisk
events with the type, device state.
* pbx.c hints: Previously, the device state processing thread in devicestate.c
would call ast_hint_state_changed() each time the state of a device changed.
Then, that code would go looking for all the hints that monitor that device,
and call their callbacks. All of this blocked the device state processing
thread. Now, the hint code is a subscriber of Asterisk events with the
type, device state. Furthermore, when this code receives a device state
change event, it queues it up to be processed by another thread so that it
doesn't block one of the event processing threads.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@66958 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
pretty cool things.
First, you can get the device state of anything in the dialplan:
NoOp(SIP/mypeer has state ${DEVSTATE(SIP/mypeer)})
NoOp(The conference room 1234 has state ${DEVSTATE(MeetMe:1234)})
Most importantly, this allows you to create custom device states so you can
control phone lamps directly from the dialplan.
Set(DEVSTATE(Custom:mycustomlamp)=BUSY)
...
exten => mycustomlamp,hint,Custom:mycustomlamp
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@54261 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r54218 | russell | 2007-02-13 14:56:50 -0600 (Tue, 13 Feb 2007) | 3 lines
Fix the documentation on the return values from device state provider
registration and deletion.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@54219 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@48164 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
commands, forward hold/unhold in dial, add hold device state
and implement holding in the SLA.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@37318 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
-----------
- Adding devicestate providers, a new architecture to add non-channel related
device state information, like parking lots, queues, meetmes, vending machines
and Windows 98 reboots (lots of blinking on those lights)
- Adding provider for parking lots, so you can subscribe to the status of a
parking lot
- Adding provider for meetme, so you can have a blinking lamp for a meetme
( Example: exten => edvina,hint,meetme:1234 )
- Adding support for directed parking - set the PARKINGEXTEN before you manually
call Park() and you will be parked on that space. If it's occupied, dialplan
execution will continue.
This work was sponsored by Voop A/S - www.voop.com
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@36055 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@29619 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
- add information about subscriptions and realtime dial plans in sip.conf.sample
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@24342 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@7221 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@6865 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@6847 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
(bug #5450, new patch)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@6806 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
remove deprecated config_old.c/config_old.h
remove unused cvsid.h
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@6454 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@6174 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@6063 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|