| Age | Commit message (Collapse) | Author |
|---|
|
In Asterisk 11, if the 'Originate' AMI command failed to connect the provided
Channel while in extension mode, a 'failed' extension would be looked up and
run. This was, I believe, unintentionally removed in 51b6c49. This patch
restores that behavior.
This also adds an enum for the various 'synchronous' modes in an attempt to
make them meaningful.
ASTERISK-26115 #close
Reported by: Nasir Iqbal
Change-Id: I8afbd06725e99610e02adb529137d4800c05345d
|
|
Adds the ability for extensions to be registered to include filename and
line number so that dialplan show output can show the filename and line
number of a config file responsible for generating a given extension.
This only affects config modules that are written to use the new extension
registering functions. In this patch, that only includes pbx_config, so
extensions registered in extensions.conf and any included extension will
be shown in this manner. Extensions registered in this manner will show
the filename and line number *instead* of the registrar.
ASTERISK-26658 #close
Reported by: Jonathan R. Rose
Change-Id: Ieccc6abccdff34ed5c7da3511fd24972b8f2dd30
|
|
Issue/patch ASTERISK-26587 was inspired by issue ASTERISK-22992
that requested ability to add callerid into app_originate.
Comments in that issue suggested that it was better solved by
adding an option to gosub prior to originating the call. The
attached patch implements this much like app_dial with two
options one to gosub on the originating channel and one to gosub
on the newly created channel and behaves just like app_dial.
I have tested this patch by adding callerid info to the new
channel and also SIPAddHeader (to e.g. add header to force auto
answer) and confirmed it works. Have also tested both 'exten'
and 'app' versions of app_originate.
Opened by: dkerr
Patch by: dkerr
Change-Id: I36abc39b58567ffcab4a636ea196ef48be234c57
|
|
We can allow dangerous functions when adding a hint since altering
dialplan is itself a privileged activity. Otherwise, we could never
execute dangerous functions.
ASTERISK-25996 #close
Reported by: Andrew Nagy
Change-Id: I4929ff100ad1200a0198262d069a34f2296e77ba
|
|
This changes context switches from a linked list to a vector, makes
'struct ast_sw' opaque to pbx.c.
Although ast_walk_context_switches is maintained the procedure is no
longer efficient except for the first call (inc==NULL). This
functionality is replaced by two new functions implemented by vector
macros.
* ast_context_switches_count (AST_VECTOR_SIZE)
* ast_context_switches_get (AST_VECTOR_GET)
As with ast_walk_context_switches callers of these functions are
expected to have locked contexts. Only a few places in Asterisk walked
the switches, they have been converted to use the new functions.
Change-Id: I08deb016df22eee8288eb03de62593e45a1f0998
|
|
This changes context ignore patterns from a linked list to a vector,
makes 'struct ast_ignorepat' opaque to pbx.c.
Although ast_walk_context_ignorepats is maintained the procedure is no
longer efficient except for the first call (inc==NULL). This
functionality is replaced by two new functions implemented by vector
macros.
* ast_context_ignorepats_count (AST_VECTOR_SIZE)
* ast_context_ignorepats_get (AST_VECTOR_GET)
As with ast_walk_context_ignorepats callers of these functions are
expected to have locked contexts. Only a few places in Asterisk walked
the ignorepats, they have been converted to use the new functions.
Change-Id: I78f2157d275ef1b7d624b4ff7d770d38e5d7f20a
|
|
This changes context includes from a linked list to a vector, makes
'struct ast_include' opaque to pbx.c.
Although ast_walk_context_includes is maintained the procedure is no
longer efficient except for the first call (inc==NULL). This
functionality is replaced by two new functions implemented by vector
macros.
* ast_context_includes_count (AST_VECTOR_SIZE)
* ast_context_includes_get (AST_VECTOR_GET)
As with ast_walk_context_includes callers of these functions are
expected to have locked contexts. Only a few places in Asterisk walked
the includes, they have been converted to use the new functions.
const have been applied where possible to parameters for ast_include
functions.
Change-Id: Ib5c882e27cf96fb2aec67a39c18b4c71c9c83b60
|
|
|
|
This eliminates some casts that I made a note saying v10 and above
would no longer need them.
Better late than never :)
Change-Id: I346cdb3032b6478ceb40eb6fe732978b54035572
|
|
Change-Id: Id1403b12136de62a272c01bb355aef65fd2c2d1e
|
|
This change introduces the concept of autohints. These are hints
which are created as a result of device state changes occurring within
the core. When this happens a hint will be created (if it does not
exist already) using the device name as the extension.
For example if a device state change is received for "PJSIP/bob"
and autohints are enabled on a context then a hint will exist in
that context for "bob" with a device of "PJSIP/bob".
For virtual or custom device states the name after the type will
be used. For example if the device state of "Custom:bob" changes
then a hint will exist in that context for "bob" with a device of
"Custom:bob".
This functionality can be enabled in extensions.conf by placing
"autohints=yes" in a context.
ASTERISK-25881 #close
Change-Id: I7e444c7da41b7b7d33374420fec658beeb18584e
|
|
Although ast_context_find, ast_context_find_or_create and
ast_context_destroy perform locking of the contexts table,
any context pointer can become invalid at any time that the
contexts table is unlocked. This change adds locking around
all complete operations involving these functions.
Places where ast_context_find was followed by ast_context_destroy
have been replaced with calls ast_context_destroy_by_name.
ASTERISK-25094 #close
Reported by: Corey Farrell
Change-Id: I1866b6787730c9c4f3f836b6133ffe9c820734fa
|
|
ast_module_info->self is often needed to register items with the core. Many
modules have ad-hoc code to make this pointer available to auxiliary sources.
This change updates the module build process to make the needed information
available to all sources in a module.
ASTERISK-25056 #close
Reported by: Corey Farrell
Change-Id: I18c8cd58fbcb1b708425f6757becaeca9fa91815
|
|
* Restore the reason value set by pbx_outgoing_attempt() to use
AST_CONTROL_xxx values as all the consumers were expecting rather than
cause codes.
* Fixed the dial routines to set cause codes for more than just
ast_request() so pbx_outgoing_attempt() reason codes will function.
* Fix inconsistent locked_channel return status in pbx_outgoing_attempt().
The chanel may not have been locked or the channel may have been a stale
pointer.
* Fixed the OutgoingSpoolFailed channel to run dialplan whenever the
dialing fails for an originate exten and 1 < synchronous.
* Fix incorrect ast_cond_wait() usage in pbx_outgoing_attempt().
Indroduced by issue ASTERISK-22212 patch.
* Made struct pbx_outgoing use the ao2 lock instead of its own lock for
the cond wait mutex. No sense in having two locks associated with the
same struct when only one is needed.
Review: https://reviewboard.asterisk.org/r/3421/
........
Merged revisions 412581 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@412583 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Much needed was a way to assign id to objects on creation, and
much change was necessary to accomplish it. Channel uniqueids
and linkedids are split into separate string and creation time
components without breaking linkedid propgation. This allowed
the uniqueid to be specified by the user interface - and those
values are now carried through to channel creation, adding the
assignedids value to every function in the chain including the
channel drivers. For local channels, the second channel can be
specified or left to default to a ;2 suffix of first. In ARI,
bridge, playback, and snoop objects can also be created with a
specified uniqueid.
Along the way, the args order to allocating channels was fixed
in chan_mgcp and chan_gtalk, and linkedid is no longer lost as
masquerade occurs.
(closes issue ASTERISK-23120)
Review: https://reviewboard.asterisk.org/r/3191/
........
Merged revisions 410157 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@410158 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This patch allows individual dialplan functions to be marked as
'dangerous', to inhibit their execution from external sources.
A 'dangerous' function is one which results in a privilege escalation.
For example, if one were to read the channel variable SHELL(rm -rf /)
Bad Things(TM) could happen; even if the external source has only read
permissions.
Execution from external sources may be enabled by setting
'live_dangerously' to 'yes' in the [options] section of asterisk.conf.
Although doing so is not recommended.
Also, the ABI was changed to something more reasonable, since Asterisk
12 does not yet have a public release.
(closes issue ASTERISK-22905)
Review: http://reviewboard.digium.internal/r/432/
........
Merged revisions 403913 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 403917 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 403959 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403960 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This fixes a bug where a zero length callerid match adjacent to a no
match callerid extension entry would be deleted together, which then
resulted in hashtable references to free'd memory. A third state of
the matchcid value has been added to indicate match to any extension
which allows enforcing comparison of matchcid on/off without errors.
(closes issue AST-1235)
Reported by: Guenther Kelleter
Review: https://reviewboard.asterisk.org/r/2930/
........
Merged revisions 401959 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 401960 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 401961 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@401962 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
The originate APIs allow callers to provide a pointer to a channel that will
point to the originated channel if the function call succeeds. This is used by AMI
to provide channel information when the originate is performed synchronously.
Unfortunately, if the originate fails in certain ways, the outbound channel is
already disposed of during the dialing itself. This results in the channel being
improperly dereferenced by the internal originate function in pbx.c.
This patch ref bumps the channel to prevent this from occurring. Callers must now
unlock and unref the channel (which is more in line with general channel management
guidelines anyway).
This only affects manager, as it is the only consumer of this API function that
actually passes in a channel pointer.
Review: https://reviewboard.asterisk.org/r/2617/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@393361 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
(closes issue ASTERISK-21645)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2545/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@390849 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
* Whitespace, doc-blocks, spelling, case, missing and incorrect tags.
* Add cleanup to Makefile for the Doxygen configuration update
* Start updating Doxygen configuration for cleaner output
* Enable inclusion of configuration files into documentation
* remove mantisworkflow...
* update documentation README
* Add markup to Tilghman's email and talk with him about updating his email, he knows...
* no code changes on this commit other than the mentioned Makefile change
(issue ASTERISK-20259)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@373384 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This patch fixes numerous doxygen warnings across Asterisk. It also updates
the makefile to regenerate the doxygen configuration on the local system
before running doxygen to help prevent warnings/errors on the local system.
Much thanks to Andrew for tackling one of the Asterisk janitor projects!
(issue ASTERISK-20259)
Reported by: Andrew Latham
Patches:
doxygen_partial.diff uploaded by Andrew Latham (license 5985)
make_progdocs.diff uploaded by Andrew Latham (license 5985)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@371989 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Quote from review board:
This patch extends the extension state callbacks so that monitoring channels
(as chan_sip) get more information of the devices which are responsible for
an extension state change. The additional information is needed by chan_sip
to present names/numbers of the caller and callee in an early-state SIP
notification. Users of extenstion state callback not interested in the
additional information are not affected by the changes.
Motivation: to present the involved party's name/number in an early-state
nofification (used by the notified device as a pickup offer) one after another
so that a user can see which call he will pick up in an undirected pickup.
Such a pickup offer to a user shall indicate the same call (number/name-A calls
number/name-B) as the call which would be picked up when an undirected pickup
is executed.
Users interested in additional state info must use the new functions
ast_extension_state_add_extended() resp.
ast_extension_state_add_destroy_extended() to register an extended state
callback. When the callback is registered this way, an extra member
device_state_info of struct ast_state_cb_info is passed to the callback in
addition to the aggregated extension state. This container holds an object for
every device of the monitored extension hint consisting of the device name, the
device state and a channel reference to the channel which (presumably) caused
the device state.
The information is used by chan_sip for early-state notifications. When the
state of a device changes and the new state contains AST_EVENT_RINGING, an
early-state notification is sent to the subscribed devices with the
caller/callee names/numbers of the oldest ringing channel of the monitored
extension. The notified user may then invoke a direct pickup, which will pickup
exactly this channel.
Users of the old non-extended callbacks will only be called when the aggregated
state did change (same behavior as before). Users of the extended callback will
also be called when the state is unchanged but does contain AST_EVENT_RINGING.
That could be the case if two channels are ringing at one device and one of
them hangs up, so the aggregated state does not change. This way the monitoring
channel can create a new early-state notification with the now ringing
party-ids.
Review: https://reviewboard.asterisk.org/r/2048
This contribution comes from Guenther Kelleter
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370979 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This is based on the work done by Olle Johansson on review board.
The idea is that the channel specified in an AMI originate or call
file is typically not connected to the outgoing extension until the
channel has been answered. With this change, an EarlyMedia header can
be specified for AMI originates and an early_media option can
be specified in call files. With this option set, once early media is
received on a channel, it will be connected with the outgoing extension.
(closes issue ASTERISK-18644)
Reported by Olle Johansson
Review: https://reviewboard.asterisk.org/r/1472
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370951 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Hangup handlers are an alternative to the h extension. They can be used
in addition to the h extension. The idea is to attach a Gosub routine to
a channel that will execute when the call hangs up. Whereas which h
extension gets executed depends on the location of dialplan execution when
the call hangs up, hangup handlers are attached to the call channel. You
can attach multiple handlers that will execute in the order of most
recently added first.
(closes issue ASTERISK-19549)
Reported by: Mark Murawski
Tested by: rmudgett
Review: https://reviewboard.asterisk.org/r/2002/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369493 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Presence support has been added. This is accomplished by
allowing for presence hints in addition to device state
hints. A dialplan function called PRESENCE_STATE has been
added to allow for setting and reading presence. Presence
can be transmitted to Digium phones using custom XML
elements in a PIDF presence document.
Voicemail has new APIs that allow for moving, removing,
forwarding, and playing messages. Messages have had a new
unique message ID added to them so that the APIs will work
reliably. The state of a voicemail mailbox can be obtained
using an API that allows one to get a snapshot of the mailbox.
A voicemail Dialplan App called VoiceMailPlayMsg has been
added to be able to play back a specific message.
Configuration hooks have been added. Configuration hooks
allow for a piece of code to be executed when a specific
configuration file is loaded by a specific module. This is
useful for modules that are dependent on the configuration
of other modules.
chan_sip now has a public method that allows for a custom
SIP INFO request to be sent mid-dialog. Digium phones use
this in order to display progress bars when files are played.
Messaging support has been expanded a bit. The main
visible difference is the addition of an AMI action
MessageSend.
Finally, a ParkingLots manager action has been added in order
to get a list of parking lots.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@368435 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
The code may be just fine, but it had not received a "ship it!" on
review board yet.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@359857 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
* Added 'b' and 'B' options to Dial. These options will allow you to run
last-minute dialplan on the caller and callee channels while the Dial
application is executing, but before the call is started. For example you
can use the 'b' option to run dialplan on the callee channel to get the name
of the newly created channel right away.
Review: https://reviewboard.asterisk.org/r/1229/
(closes issue: ASTERISK-19548)
Reported by: Mark Murawski
Tested by: Mark Murawski, Stefan Schmidt
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@359705 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Review: https://reviewboard.asterisk.org/r/1707/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@353685 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Chan_sip gives a dialog reference to the extension state callback and
assumes that when ast_extension_state_del() returns, the callback cannot
happen anymore. Chan_sip then reduces the dialog reference count
associated with the callback. Recent changes (ASTERISK-17760) have
resulted in the potential for the callback to happen after
ast_extension_state_del() has returned. For chan_sip, this could be very
bad because the dialog pointer could have already been destroyed.
* Added ast_extension_state_add_destroy() so chan_sip can account for the
sip_pvt reference given to the extension state callback when the extension
state callback is deleted.
* Fix pbx.c awkward statecbs handling in ast_extension_state_add_destroy()
and handle_statechange() now that the struct ast_state_cb has a destructor
to call.
* Ensure that ast_extension_state_add_destroy() will never return -1 or 0
for a successful registration.
* Fixed pbx.c statecbs_cmp() to compare the correct information. The
passed in value to compare is a change_cb function pointer not an object
pointer.
* Make pbx.c ast_merge_contexts_and_delete() not perform callbacks with
AST_EXTENSION_REMOVED with locks held. Chan_sip is notorious for
deadlocking when those locks are held during the callback.
* Removed unused lock declaration for the pbx.c store_hints list.
(closes issue ASTERISK-18844)
Reported by: rmudgett
Review: https://reviewboard.asterisk.org/r/1635/
........
Merged revisions 348940 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 348952 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@348953 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.10
........
r328329 | rmudgett | 2011-07-14 19:19:32 -0500 (Thu, 14 Jul 2011) | 2 lines
Make hint watcher callback take const strings for context and exten parameters.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@328344 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r324364 | dvossel | 2011-06-21 15:11:52 -0500 (Tue, 21 Jun 2011) | 10 lines
Fixes locking inversion issue in ast_async_goto()
During this function we can not hold the "chan" lock while
doing the masquerade, the explicit goto on the tmp chan, or
the channel alloc. Instead we need to get the channel lock,
store off information about the channel that we need, and
then let the channel lock go for the remainder of the function.
Review: https://reviewboard.asterisk.org/r/1275/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@324365 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This patch is the foundation of an entire new way of looking at media in Asterisk.
The code present in this patch is everything required to complete phase1 of my
Media Architecture proposal. For more information about this project visit the link below.
https://wiki.asterisk.org/wiki/display/AST/Media+Architecture+Proposal
The primary function of this patch is to convert all the usages of format
bitfields in Asterisk to use the new format and format_cap APIs. Functionally
no change in behavior should be present in this patch. Thanks to twilson
and russell for all the time they spent reviewing these changes.
Review: https://reviewboard.asterisk.org/r/1083/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@306010 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r286189 | twilson | 2010-09-10 17:04:53 -0500 (Fri, 10 Sep 2010) | 30 lines
Merged revisions 286115 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r286115 | twilson | 2010-09-10 15:35:25 -0500 (Fri, 10 Sep 2010) | 23 lines
Merged revisions 286059 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r286059 | twilson | 2010-09-10 14:25:08 -0500 (Fri, 10 Sep 2010) | 16 lines
Inherit CHANNEL() writes to both sides of a Local channel
Having Local (/n) channels as queue members and setting the language in the
extension with Set(CHANNEL(language)=fr) sets the language on the Local/...,2
channel. Hold time report playbacks happen on the Local/...,1 channel and
therefor do not play in the specified language.
This patch modifies func_channel_write to call the setoption callback and pass
the CHANNEL() write info to the callback. chan_local uses this information to
look up the other side of the channel and apply the same changes to it.
(closes issue #17673)
Reported by: Guggemand
Review: https://reviewboard.asterisk.org/r/903/
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@286190 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r280984 | tilghman | 2010-08-05 02:46:36 -0500 (Thu, 05 Aug 2010) | 22 lines
Merged revisions 280983 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r280983 | tilghman | 2010-08-05 02:40:47 -0500 (Thu, 05 Aug 2010) | 15 lines
Merged revisions 280982 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r280982 | tilghman | 2010-08-05 02:28:33 -0500 (Thu, 05 Aug 2010) | 8 lines
Change context lock back to a mutex, because functionality depends upon the lock being recursive.
(closes issue #17643)
Reported by: zerohalo
Patches:
20100726__issue17643.diff.txt uploaded by tilghman (license 14)
Tested by: zerohalo
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@280985 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
(closes issue #17336)
Reported by: snuffy
Patches:
doxygen-fixes1.diff uploaded by snuffy (license 35)
Tested by: russell
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@268969 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
function can't be written to.
This patch removes code that was duplicated from pbx.c to manager.c
in order to prevent API change in released versions of Asterisk.
There are propably also other places that would benefit from reading the
return code and react if a function returns error codes on writing a value into it.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@242919 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Specifically, by setting TESTTIME() to a particular date and time, you
can test whether a dialplan correctly branches as was intended. This was
developed after recent questions on the -users list on how to test their
holiday dialplan logic.
(closes issue #16464)
Reported by: tilghman
Patches:
20100112__issue16464.diff.txt uploaded by tilghman (license 14)
Review: https://reviewboard.asterisk.org/r/458/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@239957 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
should be resolved with a simple include of frame_defs.h
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@227645 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Reviewboard: https://reviewboard.asterisk.org/r/416/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@227580 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@223912 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r205409 | dvossel | 2009-07-08 16:35:12 -0500 (Wed, 08 Jul 2009) | 6 lines
moving ast_devstate_to_extenstate to pbx.c from devicestate.c
ast_devstate_to_extenstate belongs in pbx.c. This change
fixes a compile time error with chan_vpb as well.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@205412 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
'channel originate ... application <app>' CLI command.
(And yeah, I cleaned up some whitespace in res_clioriginate.c... big whoop,
wanna fight about it!?)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@196758 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
A new xml element was created to manage the AMI actions documentation,
using AstXML.
To register a manager action using XML documentation it is now possible
using ast_manager_register_xml().
The CLI command 'manager show command' can be used to show the parsed
documentation.
Example manager xml documentation:
<manager name="ami action name" language="en_US">
<synopsis>
AMI action synopsis.
</synopsis>
<syntax>
<xi:include xpointer="xpointer(...)" /> <-- for ActionID
<parameter name="header1" required="true">
<para>Description</para>
</parameter>
...
</syntax>
<description>
<para>AMI action description</para>
</description>
<see-also>
...
</see-also>
</manager>
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@196308 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This patch adds 'const' tags to a number of Asterisk APIs where they are appropriate (where the API already demanded that the function argument not be modified, but the compiler was not informed of that fact). The list includes:
- CLI command handlers
- CLI command handler arguments
- AGI command handlers
- AGI command handler arguments
- Dialplan application handler arguments
- Speech engine API function arguments
In addition, various file-scope and function-scope constant arrays got 'const' and/or 'static' qualifiers where they were missing.
Review: https://reviewboard.asterisk.org/r/251/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@196072 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This branch adds additional methods to dialplan functions, whereby the result
buffers are now dynamic buffers, which can be expanded to the size of any
result. No longer are variable substitutions limited to 4095 bytes of data.
In addition, the common case of needing buffers much smaller than that will
enable substitution to only take up the amount of memory actually needed.
The existing variable substitution routines are still available, but users
of those API calls should transition to using the dynamic-buffer APIs.
Reviewboard: http://reviewboard.digium.com/r/174/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@191140 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
The F option to app_dial has been modified to accept no parameters and perform
the above functionality. I don't see anywhere else that is doing function
overloading, but this really is the best place for this operation because:
- It makes it close to the 'g' option in the argument list which provides
similar functionality.
- The existing code to support the current F option provides a very
convienient location to add this new feature.
(closes issue #12381)
Reported by: michael-fig
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@187491 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Included is a small bugfix to an ast_str helper, but most of these changes
are simply doxygen fixes.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@185912 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Copied from my review board description:
This is a continuation of the API changes documentation started for describing
changes between releases. Most of the API changes were pretty simple needing
only to be brought to attention via the new "Asterisk API Changes" list.
However, if you see anything that needs further explanation feel free to
supplement what is there. The current method of documenting is to add (in the
header file): \version <ver number> <description of changes> and then to add
the function to the change list in doxyref.h on the AstAPIChanges page. I also
made sure all the functions that were newly added were tagged with \since
1.6.1. I think this is a good habit to start both for the historical aspect as
well as for the future ability to easily add a "New Asterisk API" page.
Review: http://reviewboard.digium.com/r/190/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@180719 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
In order to merge this 1.4 patch into trunk,
I had to resolve some conflicts and wait for
Russell to make some changes to res_agi.
I re-ran all the tests; 39 calls in all, and
made fairly careful notes and comparisons: I
don't want this to blow up some aspect of
asterisk; I completely removed the KEEPALIVE
from the pbx.h decls. The first 3 scenarios
involving feature park; feature xfer to 700;
hookflash park to Park() app call all behave
the same, don't appear to leave hung channels,
and no crashes.
........
r166093 | murf | 2008-12-19 15:30:32 -0700 (Fri, 19 Dec 2008) | 131 lines
This merges the masqpark branch into 1.4
These changes eliminate the need for (and use of)
the KEEPALIVE return code in res_features.c;
There are other places that use this result code
for similar purposes at a higher level, these appear
to be left alone in 1.4, but attacked in trunk.
The reason these changes are being made in 1.4, is
that parking ends a channel's life, in some situations,
and the code in the bridge (and some other places),
was not checking the result code properly, and dereferencing
the channel pointer, which could lead to memory corruption
and crashes.
Calling the masq_park function eliminates this danger
in higher levels.
A series of previous commits have replaced some parking calls
with masq_park, but this patch puts them ALL to rest,
(except one, purposely left alone because a masquerade
is done anyway), and gets rid of the code that tests
the KEEPALIVE result, and the NOHANGUP_PEER result codes.
While bug 13820 inspired this work, this patch does
not solve all the problems mentioned there.
I have tested this patch (again) to make sure I have
not introduced regressions.
Crashes that occurred when a parked party hung up
while the parking party was listening to the numbers
of the parking stall being assigned, is eliminated.
These are the cases where parking code may be activated:
1. Feature one touch (eg. *3)
2. Feature blind xfer to parking lot (eg ##700)
3. Run Park() app from dialplan (eg sip xfer to 700)
(eg. dahdi hookflash xfer to 700)
4. Run Park via manager.
The interesting testing cases for parking are:
I. A calls B, A parks B
a. B hangs up while A is getting the numbers announced.
b. B hangs up after A gets the announcement, but
before the parking time expires
c. B waits, time expires, A is redialed,
A answers, B and A are connected, after
which, B hangs up.
d. C picks up B while still in parking lot.
II. A calls B, B parks A
a. A hangs up while B is getting the numbers announced.
b. A hangs up after B gets the announcement, but
before the parking time expires
c. A waits, time expires, B is redialed,
B answers, A and B are connected, after
which, A hangs up.
d. C picks up A while still in parking lot.
Testing this throroughly involves acting all the permutations
of I and II, in situations 1,2,3, and 4.
Since I added a few more changes (ALL references to KEEPALIVE in the bridge
code eliimated (I missed one earlier), I retested
most of the above cases, and no crashes.
H-extension weirdness.
Current h-extension execution is not completely
correct for several of the cases.
For the case where A calls B, and A parks B, the
'h' exten is run on A's channel as soon as the park
is accomplished. This is expected behavior.
But when A calls B, and B parks A, this will be
current behavior:
After B parks A, B is hung up by the system, and
the 'h' (hangup) exten gets run, but the channel
mentioned will be a derivative of A's...
Thus, if A is DAHDI/1, and B is DAHDI/2,
the h-extension will be run on channel
Parked/DAHDI/1-1<ZOMBIE>, and the
start/answer/end info will be those
relating to Channel A.
And, in the case where A is reconnected to
B after the park time expires, when both parties
hang up after the joyful reunion, no h-exten
will be run at all.
In the case where C picks up A from the
parking lot, when either A or C hang up,
the h-exten will be run for the C channel.
CDR's are a separate issue, and not addressed
here.
As to WHY this strange behavior occurs,
the answer lies in the procedure followed
to accomplish handing over the channel
to the parking manager thread. This procedure
is called masquerading. In the process,
a duplicate copy of the channel is created,
and most of the active data is given to the
new copy. The original channel gets its name
changed to XXX<ZOMBIE> and keeps the PBX
information for the sake of the original
thread (preserving its role as a call
originator, if it had this role to begin
with), while the new channel is without
this info and becomes a call target (a
"peer").
In this case, the parking lot manager
thread is handed the new (masqueraded)
channel. It will not run an h-exten
on the channel if it hangs up while
in the parking lot. The h exten will
be run on the original channel instead,
in the original thread, after the bridge
completes.
See bug 13820 for our intentions as
to how to clean up the h exten behavior.
Review: http://reviewboard.digium.com/r/29/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@166665 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This is part of an effort to completely remove AST_PBX_KEEPALIVE and other
similar return codes from the source. While this usage was perfectly safe,
there are others that are problematic. Since we know ahead of time that
we do not want to PBX to destroy the channel, the PBX API has been changed
so that information can be provided as an argument, instead, thus removing
the need for the KEEPALIVE return value.
Further changes to get rid of KEEPALIVE and related code is being done by
murf. There is a patch up for that on review 29.
Review: http://reviewboard.digium.com/r/98/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@165723 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
