Age | Commit message (Collapse) | Author |
|
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r323863 | twilson | 2011-06-15 14:58:18 -0500 (Wed, 15 Jun 2011) | 2 lines
Make ARRAY_LEN() return the same type on x86 and x86_64 systems
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@323864 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
For each component, the set of valid BNF expansions defines exactly
which characters may appear unescaped. All other characters MUST be
escaped.
This patch modifies ast_uri_encode() to encode strings in line with this recommendation. This patch also adds an ast_escape_quoted() function which escapes '"' and '\' characters in quoted strings in accordance with section 25.1 of RFC 3261. The ast_uri_encode() function has also been modified to take an ast_flags struct describing the set of rules it should use when escaping characters to allow for it to escape SIP URIs in addition to HTTP URIs and other types of URIs or variations of those two URI types in the future.
The ast_uri_decode() function has also been modified to accept an ast_flags struct describing the set of rules to use when decoding to enable decoding '+' as ' ' in legacy http URLs.
The unit tests for these functions have also been updated.
ABE-2705
Review: https://reviewboard.asterisk.org/r/1081/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@303509 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r298960 | tilghman | 2010-12-17 17:52:04 -0600 (Fri, 17 Dec 2010) | 20 lines
Merged revisions 298957 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r298957 | tilghman | 2010-12-17 17:30:55 -0600 (Fri, 17 Dec 2010) | 13 lines
Merged revisions 298905 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r298905 | tilghman | 2010-12-17 15:40:56 -0600 (Fri, 17 Dec 2010) | 6 lines
Let Asterisk find better backtrace information with libbfd.
The menuselect option BETTER_BACKTRACES, if enabled, will use libbfd to search
for better symbol information within both the Asterisk binary, as well as
loaded modules, to assist when using inline backtraces to track down problems.
Review: https://reviewboard.asterisk.org/r/1055/
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@298961 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Already had the pthread ID which is not the same. The most obvious enhancement
is in the "core show threads" output. As stated in the utils header, if the
platform isn't supported -1 is reported (instead of the process ID previously).
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@298137 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
1) It occurred to me that the difference in usage between the error ast_str and
the ast_test_update_status() usage has turned out to be a bit ambiguous in
practice. In a lot of cases, the same message was being sent to both.
In other cases, it was only sent to one or the other. My opinion now is that
in every case, I think it makes sense to do both; we should output it to the
CLI as well as save it off for logging purposes.
This change results in most of the changes in this diff, since it required
changes to all existing unit tests. It also allowed for some simplifications
of unit test API implementation code.
2) Update ast_test_status_update() to include the file, function, and line
number for the code providing the update.
3) There are some formatting tweaks here and there. Hopefully they aren't too
distracting for code review purposes. Reviewboard's diff viewer seems to do a
pretty good job of pointing out when something is a whitespace change.
4) I moved the md5_test and sha1_test into the test_utils module. It seemed
like a better approach since these tests are so tiny.
5) I changed the number of nodes used in heap_test_2 from 1 million to
100 thousand. The only reason for this was to reduce the time it took
for this test to run.
6) Remove an unused function prototype that was at the bottom of utils.h.
7) Simplify test_insert() using the LIST_INSERT_SORTALPHA() macro. The one
minor difference in behavior is that it no longer checks for a test registered
with the same name.
8) Expand the code in test_alloc() to provide specific error messages for each
failure case, to clearly inform developers if they forget to set the name,
summary, description, etc.
9) Tweak the output of the "test show registered" CLI command. I swapped the
name and category to have the category first. It seemed more natural since
that is the sort key.
10) Don't output the status ast_str in the "test show results" CLI command.
This is going to tend to be pretty verbose, so just leave that for the
detailed test logs (test generate results).
Review: https://reviewboard.asterisk.org/r/493/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@245864 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
1. URI Encoding
This patch changes ast_uri_encode()'s behavior when doreserved is enabled.
Previously when doreserved was enabled only a small set of reserved
characters were encoded. This set was comprised primarily of the reserved
characters defined in RFC3261 section 25.1, but contained other characters as
well. Rather than only escaping the reserved set, doreserved now escapes
all characters not within the unreserved set as defined by RFC 3261 and
RFC 2396. Also, the 'doreserved' variable has been renamed to 'do_special_char'
in attempts to avoid confusion.
When doreserve is not enabled, the previous logic of only encoding the
characters <= 0X1F and > 0X7f remains, except for the '%' character, which
must always be encoded as it signifies a HEX escaped character during the decode
process.
2. URI Decoding: Break up URI before decode.
In chan_sip.c ast_uri_decode is called on the entire URI instead of it's
individual parts after it is parsed. This is not good as ast_uri_decode
can introduce special characters back into the URI which can mess up parsing.
This patch resolves this by not decoding a URI until parsing is completely
done. There are many instances where we check to see if pedantic checking
is enabled before we decode a URI. In these cases a new macro,
SIP_PEDANTIC_DECODE, is used on the individual parsed segments of the URI
rather than constantly putting if (pedantic) { decode() } checks everywhere
in the code. In the areas where ast_uri_decode is not dependent upon
pedantic checking this macro is not used, but decoding is still moved to
each individual part of the URI. The only behavior that should change from
this patch is the time at which decoding occurs.
Since I had to look over every place URI parsing occurs to create this
patch, I found several places where we use duplicate code for parsing.
To consolidate the code, those areas have updated to use the parse_uri()
function where possible.
3. SIP display-name decoding according to RFC3261 section 25.
To properly decode the display-name portion of a FROM header, chan_sip's
get_calleridname() function required a complete re-write. More information
about this change can be found in the comments at the beginning of this function.
4. Unit Tests.
Unit tests for ast_uri_encode, ast_uri_decode, and get_calleridname() have been
written. This involved the addition of the test_utils.c file for testing the
utils api.
(closes issue #16299)
Reported by: wdoekes
Patches:
astsvn-16299-get_calleridname.diff uploaded by wdoekes (license 717)
get_calleridname_rewrite.diff uploaded by dvossel (license 671)
Tested by: wdoekes, dvossel, Nick_Lewis
Review: https://reviewboard.asterisk.org/r/469/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@243200 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
from various files.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@209400 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
CEL is the new system for logging channel events. This was inspired after
facing many problems trying to represent what is possible to happen to a call
in Asterisk using CDR records. For more information on CEL, see the built in
HTML or PDF documentation generated from the files in doc/tex/.
Many thanks to Steve Murphy (murf) and Brian Degenhardt (bmd) for their hard
work developing this code. Also, thanks to Matt Nicholson (mnicholson) and
Sean Bright (seanbright) for their assistance in the final push to get this
code ready for Asterisk trunk.
Review: https://reviewboard.asterisk.org/r/239/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@203638 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r199856 | seanbright | 2009-06-10 12:08:35 -0400 (Wed, 10 Jun 2009) | 2 lines
__WORDSIZE is not available on all platforms, so use sizeof(void *) instead.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@199857 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r199626 | seanbright | 2009-06-08 15:24:32 -0400 (Mon, 08 Jun 2009) | 21 lines
Increase the size of our thread stack on 64 bit processors.
We were setting the stack size for each thread to 240KB regardless of
architecture, which meant that in some scenarios we actually had less available
stack space on 64 bit processors (pointers use 8 bytes instead of 4). So now we
calculate the stack size we reserve based on the platform's __WORDSIZE, which
gives us:
32 bit -> 240KB
64 bit -> 496KB
128 bit -> 1008KB (that's right, we're ready for 128 bit processors)
Patch typed by me but written by several members of #asterisk-dev, including
Kevin, Tilghman, and Qwell.
(closes issue #14932)
Reported by: jpiszcz
Patches:
06052009_issue14932.patch uploaded by seanbright (license 71)
Tested by: seanbright
........
r199628 | seanbright | 2009-06-08 15:28:33 -0400 (Mon, 08 Jun 2009) | 2 lines
Fix a typo in the stack size calculation just introduced.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@199630 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This patch adds 'const' tags to a number of Asterisk APIs where they are appropriate (where the API already demanded that the function argument not be modified, but the compiler was not informed of that fact). The list includes:
- CLI command handlers
- CLI command handler arguments
- AGI command handlers
- AGI command handler arguments
- Dialplan application handler arguments
- Speech engine API function arguments
In addition, various file-scope and function-scope constant arrays got 'const' and/or 'static' qualifiers where they were missing.
Review: https://reviewboard.asterisk.org/r/251/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@196072 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
(closes issue #10961)
Reported by: ys
Patches:
digest_auth_r148468_v5.diff uploaded by ys (license 281)
SVN branch http://svn.digium.com/svn/asterisk/team/group/manager_http_auth
Tested by: ys, twilson, tilghman
Review: http://reviewboard.digium.com/r/223/
Reviewed by: tilghman,russellb,mmichelson
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@190349 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@184630 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
The main problem here was that cstdlib was undefining free thereby causing the
proper debug macros to not be used. ast_h323.cxx has been changed to call
ast_free instead to avoid the issue.
A few other issues were addressed:
- There were a few instances of functions improperly passing ast_free instead
of ast_free_ptr.
- Some clean up was done to avoid the debug macros intentionally being redefined.
(copied below from Kevin's commit, appreciate the help)
- disable astmm.h from doing anything when STANDALONE is defined, which is used
by the tools in the utils/ directory that use parts of Asterisk header files in
hackish ways; also ensure that utils/extconf.c and utils/conf2ael.c are
compiled with STANDALONE defined.
(closes issue #13593)
Reported by: pj
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@181135 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Copied from my review board description:
This is a continuation of the API changes documentation started for describing
changes between releases. Most of the API changes were pretty simple needing
only to be brought to attention via the new "Asterisk API Changes" list.
However, if you see anything that needs further explanation feel free to
supplement what is there. The current method of documenting is to add (in the
header file): \version <ver number> <description of changes> and then to add
the function to the change list in doxyref.h on the AstAPIChanges page. I also
made sure all the functions that were newly added were tagged with \since
1.6.1. I think this is a good habit to start both for the historical aspect as
well as for the future ability to easily add a "New Asterisk API" page.
Review: http://reviewboard.digium.com/r/190/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@180719 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
When the second part of this macro is written as 0[a] instead of a[0], it will
force a failure if the macro is used on a C++ object that overloads the []
operator.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@170943 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
This patch introduces a function to do careful writes on a file stream which
will handle timeouts and partial writes. It is currently used in AMI to
address the issue that has been reported. However, there are probably a few
other places where this could be used.
(closes issue #13546)
Reported by: srt
Tested by: russell
http://reviewboard.digium.com/r/104/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@166282 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r162413 | russell | 2008-12-09 16:17:39 -0600 (Tue, 09 Dec 2008) | 8 lines
Remove the test_for_thread_safety() function completely.
The test is not valid. Besides, if we actually suspected that recursive
mutexes were not working, we would get a ton of LOG_ERROR messages when
DEBUG_THREADS is turned on.
(inspired by a discussion on the asterisk-dev list)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@162414 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
------------------------------------------------------------------------
r159808 | kpfleming | 2008-11-29 10:58:29 -0600 (Sat, 29 Nov 2008) | 7 lines
update dev-mode compiler flags to match the ones used by default on Ubuntu Intrepid, so all developers will see the same warnings and errors
since this branch already had some printf format attributes, enable checking for them and tag functions that didn't have them
format attributes in a consistent way
------------------------------------------------------------------------
in addition:
move some format attributes from main/utils.c to the header files they belong in, and fix up references to the relevant functions based on new compiler warnings
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@159818 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r135899 | tilghman | 2008-08-05 22:02:59 -0500 (Tue, 05 Aug 2008) | 4 lines
1) Bugfix for debugging code
2) Reduce compiler warnings for another section of debugging code
(Closes issue #13237)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@135900 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
DUNDi uses a concept called the Entity ID for unique server identifiers. I have
pulled out the handling of EIDs and made it something available to all of Asterisk.
There is now a global Entity ID that can be used for other purposes as well, such
as code providing distributed device state, which is why I did this. The global
Entity ID is set automatically, just like it was done in DUNDi, but it can also be
set in asterisk.conf. DUNDi will now use this global EID unless one is specified
in dundi.conf.
The current EID for the system can be seen in the "core show settings" CLI command.
It is also available in the dialplan via the ENTITYID variable.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@121439 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r118048 | russell | 2008-05-23 07:30:53 -0500 (Fri, 23 May 2008) | 9 lines
Don't declare a function that takes variable arguments as inline, because it's
not valid, and on some compilers, will emit a warning.
http://gcc.gnu.org/onlinedocs/gcc/Inline.html#Inline
(closes issue #12289)
Reported by: francesco_r
Patches by Tilghman, final patch by me
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@118049 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r117086 | tilghman | 2008-05-19 11:05:05 -0500 (Mon, 19 May 2008) | 2 lines
The addition of usleep(2) within ast_assert requires the inclusion of the unistd.h header
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@117088 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
file, line, and function name twice.
(Closes issue #12650)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@116694 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r116463 | russell | 2008-05-14 16:32:00 -0500 (Wed, 14 May 2008) | 4 lines
Add ast_assert(), which can be used to handle fatal errors. It is only compiled
in if dev-mode is enabled, and only aborts if DO_CRASH is defined.
(inspired by issue #12650)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@116469 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
interpreted as format strings. Most of these changes are solely to make compiling with -Wsecurity and -Wformat=2 happy, and were not
actual problems, per se. I also added format attributes to any printf wrapper functions I found that didn't have them. -Wsecurity and -Wmissing-format-attribute added to --enable-dev-mode.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@109447 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
who really need it.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89466 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Also remove some unnecessary includes.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89380 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
comments on the content of these two files.
utils.h (which is included in over 150 files) contains a lot of
unrelated functions which require the inclusion of a large number
of other headers. At some point we should partition its content
in a better way.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89341 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
but make sure that asterisk/compiler.h is included everywhere
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89336 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
build times - tested, there is no measureable difference before and
after this commit.
In this change:
use asterisk/compat.h to include a small set of system headers:
inttypes.h, unistd.h, stddef.h, stddint.h, sys/types.h, stdarg.h,
stdlib.h, alloca.h, stdio.h
Where available, the inclusion is conditional on HAVE_FOO_H as determined
by autoconf.
Normally, source files should not include any of the above system headers,
and instead use either "asterisk.h" or "asterisk/compat.h" which does it
better.
For the time being I have left alone second-level directories
(main/db1-ast, etc.).
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89333 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
free to be ast_free, astmm said all calls to free were coming from utils.h
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@82628 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@81326 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
support it.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@76296 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
universal mod to make ast_flags a 64 bit thing. Instead, I added a 64-bit version of ast_flags (ast_flags64), and 64-bit versions of the test-flag, set-flag, etc. macros, and an app_parse_options64 routine, and I use these in app_dial alone, to eliminate the 30-option limit it had grown to meet. There is room now for 32 more options and flags. I was heavily tempted to implement some of the other ideas that were presented, but this solution does not intro any new versions of dial, doesn't have a different API, has a minimal/zero impact on code outside of dial, and doesn't seriously (I hope) affect the code structure of dial. It's the best I can think of right now. My goal was NOT to rewrite dial. I leave that to a future, coordinated effort.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@75983 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
run on peer. Had to upgrade ast_flag stuff to 64 bits to do this.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@75400 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
necessary (and is faster than an outcall to mkdir -p)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@71040 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r69392 | kpfleming | 2007-06-14 16:50:40 -0500 (Thu, 14 Jun 2007) | 2 lines
use ast_localtime() in every place localtime_r() was being used
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@69405 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
places in the code where the same block of code for creating detached threads
was replicated. (patch from bbryant)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@65968 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
(inspired by issue #9215)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@58149 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@56665 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r53810 | russell | 2007-02-09 18:35:09 -0600 (Fri, 09 Feb 2007) | 24 lines
Merge team/russell/sla_rewrite
This is a completely new implementation of the SLA functionality introduced in
Asterisk 1.4. It is now functional and ready for testing. However, I will be
adding some additional features over the next week, as well.
For information on how to set this up, see configs/sla.conf.sample
and doc/sla.txt.
In addition to the changes in app_meetme.c for the SLA implementation itself,
this merge brings in various other changes:
chan_sip:
- Add the ability to indicate HOLD state in NOTIFY messages.
- Queue HOLD and UNHOLD control frames even if the channel is not bridged to
another channel.
linkedlists.h:
- Add support for rwlock based linked lists.
dial.c:
- Add the ability to run ast_dial_start() without a reference channel to
inherit information from.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@53817 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r48987 | kpfleming | 2006-12-27 12:29:13 -0600 (Wed, 27 Dec 2006) | 2 lines
allow 'show memory' and 'show memory summary' to distinguish memory allocations that were done for caching purposes, so they don't look like memory leaks
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@48989 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
While doing this, add a bit of documentation, and slightly
extend the functionality as follows:
+ a max_len of -1 means that we take whatever the current size
is, and never try to extend the buffer;
+ add support for alloca()-ted dynamic strings, which is very
useful for all cases where we do an ast_build_string() now.
Next step is to simplify the interface by using shorter names
(e.g. ast_str as a prefix) and removing the _thread variant
of the functions by saving the threadstorage reference into
the struct ast_str. This can be done by overloading the
'type' field.
Finally, I will do my best to remove the convoluted interface
that results from trying to support platforms without va_copy().
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@48509 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
as well as what the motivation is for using it.
- Add a comment by the declaration of ast_inet_ntoa() noting that this function
is not reentrant, and the result of a previous call to the function is no
longer valid after calling it again.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@48019 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
................
r44956 | kpfleming | 2006-10-12 13:38:51 -0500 (Thu, 12 Oct 2006) | 10 lines
Merged revisions 44955 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.2
........
r44955 | kpfleming | 2006-10-12 13:31:26 -0500 (Thu, 12 Oct 2006) | 2 lines
ensure that IAX2 and SIP sockets allow UDP fragmentation when running on Linux (thanks to Brian Candler on the asterisk-dev list for the tip)
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@44957 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r44378 | kpfleming | 2006-10-04 14:47:22 -0500 (Wed, 04 Oct 2006) | 4 lines
update thread creation code a bit
reduce standard thread stack size slightly to allow the pthreads library to allocate the stack+data and not overflow a power-of-2 allocation in the kernel and waste memory/address space
add a new stack size for 'background' threads (those that don't handle PBX calls) when LOW_MEMORY is defined
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@44379 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
Every OS uses strcompat now - this was done on purpose.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@42982 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
attribute and throwing a warning.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@40815 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
|
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@40785 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|