| Age | Commit message (Collapse) | Author |
|---|
|
It was possible for a frame to be re-inserted into a jitter buffer after it
had been removed from it. A case when this happened was if a frame was read
out of the jitterbuffer, passed to the translation core, and then multiple
frames were returned from said translation core. Upon multiple frames being
returned the first is passed on, but sebsequently "chained" frames are put
back into the read queue. Thus it was possible for a frame to go back into
the jitter buffer where this would cause problems.
This patch adds a flag to frames that are inserted into the channel's read
queue after translation. The abstract jitter buffer code then checks for this
flag and ignores any frames marked as such.
Change-Id: I276c44edc9dcff61e606242f71274265c7779587
|
|
Function CHANNEL(rtcp,all_rtt) CHANNEL(rtcp,all_loss) CHANNEL(rtcp,all_jitter)
always return 0.0 due to wrong define of macro "AST_RTP_SATA_SET" and
"AST_RTP_STAT_STRCPY".
It should compare "combined" with "stat" not "current_stat".
ASTERISK-26710 #close
Reported-by: Aaron An
Tested-by: AaronAn
Change-Id: Id4140fafbf92e2db689dac5b17d9caa009028a15
|
|
ASTERISK-25083
Change-Id: Id54baa57a8dbca84e29f28bcd2ffc0a5ac12d8b2
|
|
The PJSIPShowRegistrationsInbound AMI command was just dumping out
all AORs which was pretty useless and resource heavy since it had
to get all endpoints, then all aors for each endpoint, then all
contacts for each aor.
PJSIPShowRegistrationInboundContactStatuses sends ContactStatusDetail
events which meets the intended purpose of the other command and has
significantly less overhead. Also, some additional fields that were
added to Contact since the original creation of the ContactStatusDetail
event have been added to the end of the event.
For compatibility purposes, PJSIPShowRegistrationsInbound is left
intact.
ASTERISK-26644 #close
Change-Id: I326f12c9ecb52bf37ba03f0748749de4da01490a
|
|
|
|
|
|
The latest Release candidate fails to create RTP streams when IPv6
is not available. Due to the changes made in September the ast_sockaddr
structure passed around to create these streams is always of AF_INET6
type, causing failure when used for IPv4. This patch adds a utility
function to check for availability of IPv6 and applies such check
at startup to determine how to create the ast_sockaddr structures.
ASTERISK-26617 #close
Change-Id: I627a4e91795e821111e1cda523f083a40d0e0c3e
|
|
Use of the new logging is as simple as issuing the new CLI command or
setting the new pjproject.conf option.
Other options that can affect the logging are how you have the pjproject
log levels mapped to Asterisk log types in pjproject.conf and if you have
configured Asterisk to log the DEBUG type messages. Altering the
pjproject.conf level mapping shouldn't be necessary for most installations
as the default mapping is sensible. Configuring Asterisk to log the DEBUG
message type is standard practice for collecting debug information.
* Added CLI "pjproject set log level" command to dynamically adjust the
maximum pjproject log message level.
* Added CLI "pjproject show log level" command to see the currently set
maximum pjproject log message level.
* Added pjproject.conf startup section "log_level" option to set the
initial maximum pjproject log message level so all messages could be
captured from initialization.
* Set PJ_LOG_MAX_LEVEL to 6 to compile in all defined logging levels into
bundled pjproject. Pjproject will use the currently set run time log
level to determine if a log message is generated just like Asterisk
verbose and debug logging levels.
* In log_forwarder(), made always log enabled and mapped pjproject log
messages. DEBUG mapped log messages are no longer gated by the current
Asterisk debug logging level.
* Removed RAII_VAR() from res_pjproject.c:get_log_level().
ASTERISK-26630 #close
Change-Id: I6dca12979f482ffb0450aaf58db0fe0f6d2e5389
|
|
into 13
|
|
Previously, a TLS server socket would only be restarted upon sip reload if the
bind address had changed. This commit adds checking for changes to TLS
parameters like certificate, ciphers, etc. so they get picked up without
requiring a reload of the entire chan_sip module. This does not affect open
connections in any way, but new connections will use the new TLS parameters.
The changes also apply to HTTP and Manager.
ASTERISK-26604 #close
Change-Id: I169e86cefc6dcd627c915134015a6a1ab1aadbe6
|
|
A while back, a master-only change was made to check for librt which
should probably have been cherry-picked to 13 at that time. Sometime
between then and now, part of that change did make it into 13 but it
was incomplete and non-functional. This patch backports the rest
of the librt check and allows the link of libasteriskpj to use the
results.
Change-Id: I1424008fd8c90f389dda53162ec4a340b253a3c1
|
|
Based on bridge video AMI event changes, bump the minor version of AMI.
Change-Id: I02586bd6cafc0baa33ea98c2f75356c0f5e03435
|
|
|
|
ASTERISK-26343
Change-Id: I06dbf7366e26028251964143454a77d017bb61c8
|
|
source" into 13
|
|
|
|
verification." into 13
|
|
Responding to authentication challenges leaks PJSIP memory pools.
The leak was introduced with a pjproject 2.5.5 API change.
https://trac.pjsip.org/repos/ticket/1929 changed the API usage of
pjsip_auth_clt_init() to require the new API pjsip_auth_clt_deinit() to
clean up cached authentication allocations that get allocated with
pjsip_auth_clt_reinit_req().
ASTERISK-26516 #close
Change-Id: I4473141b8c3961d0dc91c382beb3876b3efb45c8
|
|
The sending codec is switched to the receiving codec and then
is switched back to the best native codec on EVERY receiving RTP packets.
This is because after call of ast_channel_set_rawwriteformat there is call
of ast_set_write_format which calls set_format which sets rawwriteformat
to the best native format.
This patch adds a new function ast_set_write_format_path which set
specific write path on channel and uses this function to switch
the sending codec.
ASTERISK-26603 #close
Change-Id: I5b7d098f8b254ce8f45546e6c36e5d324737f71d
|
|
verification.
This way one X.509 certificate can be used for hosts that
can be reached under multiple DNS names or for multiple hosts.
Signed-off-by: Maciej Szmigiero <mail@maciej.szmigiero.name>
ASTERISK-25063 #close
Change-Id: I13302c80490a0b44c43f1b45376c9bd7b15a538f
|
|
In multi-party bridges, Asterisk currently supports two video modes:
* Follow the talker, in which the speaker with the most energy is shown
to all participants but the speaker, and the speaker sees the
previous video source
* Explicitly set video sources, in which all participants see a locked
video source
Prior to this patch, ARI had no ability to manipulate the video source.
This isn't important for two-party bridges, in which Asterisk merely
relays the video between the participants. However, in a multi-party
bridge, it can be advantageous to allow an external application to
manipulate the video source.
This patch provides two new routes to accomplish this:
(1) setVideoSource: POST /bridges/{bridgeId}/videoSource/{channelId}
Sets a video source to an explicit channel
(2) clearVideoSource: DELETE /bridges/{bridgeId}/videoSource
Removes any explicit video source, and sets the video mode to talk
detection
ASTERISK-26595 #close
Change-Id: I98e455d5bffc08ea5e8d6b84ccaf063c714e6621
|
|
This reverts commit 6b5a7ced136b7178ae0b2ba39221eba1cd2e37c9.
Change-Id: I61d1dbb2e69e1977f684b7dfc8e98211024e1cd1
|
|
Libedit 3.1 is not build with unicode on as a default and so the
prototype for the el_gets callback changed from expecting a char buffer
to accepting a wchar buffer. If ast_el_read_char isn't changed,
the cli reads garbage from teh terminal.
Added a configure test for (*el_rfunc_t)(EditLine *, wchar_t *) and
updated ast_el_read_char to use the HAVE_ define to detemrine whether
to use char or wchar.
ASTERISK-26592 #close
Change-Id: I9099b46f68e06d0202ff80e53022a2b68b08871a
|
|
|
|
This reverts commit 9231a56cf3d6f5eca1bf2d37d827453400690773.
Multiple testsuite failures were detected after the fact.
Change-Id: I3bac8d7c3ddb69a4ddf6c5d6de0ffa5ff7ff3af7
|
|
|
|
function." into 13
|
|
There are several places in Asterisk that have duplicated logic
for deferring important frames until later.
This commit adds a couple of API calls to facilitate this automatically.
ast_channel_start_defer_frames(): Future reads of deferrable frames on
this channel will be deferred until later.
ast_channel_stop_defer_frames(): Any frames that have been deferred get
requeued onto the channel.
ASTERISK-26343
Change-Id: I3e1b87bc6796f222442fa6f7d1b6a4706fb33641
|
|
The readdir_r function has been deprecated and should no longer be used. This
patch removes the readdir_r dependency (replaced it with readdir) and also moves
the directory search code to a more centralized spot (file.c)
Also removed a strict dependency on the dirent structure's d_type field as it
is not portable. The code now checks to see if the value is available. If so,
it tries to use it, but defaults back to using the stats function if necessary.
Lastly, for most implementations of readdir it *should* be thread-safe to make
concurrent calls to it as long as different directory streams are specified.
glibc falls into this category. However, since it is possible that there exist
some implementations that are not safe, locking has been added for those other
than glibc.
ASTERISK-26412
ASTERISK-26509 #close
Change-Id: Id8f54689b1e2873e82a09d0d0d2faf41964e80ba
|
|
The dynamic range (96-127) allows 32 RTP Payload Types. RFC 3551 section 3
allows to reassign other ranges. Consequently, when the dynamic range is
exhausted, you can go for "rtp_pt_dynamic = 35" (or 0) in asterisk.conf. This
enables the range 35-63 (or 0-63) giving room for another 29 (or 64) payload
types.
ASTERISK-26311 #close
Change-Id: I7bc96ab764bc30098a178b841cbf7146f9d64964
(cherry picked from commit 9ac53877f688c06acaa7c377f15da8770e4ee88b)
|
|
This patch adds three new CLI commands:
- ari show apps: list the registered ARI applications
- ari show app: show detailed information about an ARI application
- ari set debug: dump events being sent to an ARI application
Note that while these CLI commands live in the res_stasis module, we use
the 'ari' family for these commands. This was done as most users of
Asterisk aren't aware of the semantic differences between ARI and
res_stasis, and some 'ari' CLI commands already exist.
ASTERISK-26488 #close
Change-Id: I51ad6ff0cabee0d69db06858c13f18b1c513c9f5
|
|
Headers declare that memcpy does not accept NULL argument for the first
two parameters. Add a conditional block to prevent memcpy and ast_free
from running on vectors with NULL element array.
ASTERISK-26526 #close
Change-Id: I988a476bb5fcfcbd3f6d6c6b3e7769e4f9629b71
|
|
It is only safe to run ast_register_cleanup callbacks when all modules
have been unloaded. Previously these callbacks were run during graceful
shutdown, making it possible to crash during shutdown.
ASTERISK-26513 #close
Change-Id: Ibfa635bb688d1227ec54aa211d90d6bd45052e21
|
|
When channel format changes occurred as a result of an RTP
re-negotiation the bridge was not informed this had happened.
As a result the bridge technology was not re-evaluated and the
channel may have been in a bridge technology that was incompatible
with its formats. The bridge is now unbridged and the technology
re-evaluated when this occurs.
The chan_pjsip module also allowed asymmetric codecs for sending
and receiving. This did not work with all devices and caused one
way audio problems. The default has been changed to NOT do this
but to match the sending codec to the receiving codec. For users
who want asymmetric codecs an option has been added, asymmetric_rtp_codec,
which will return chan_pjsip to the previous behavior.
The codecs returned by the chan_pjsip module when queried by
the bridge_native_rtp module were also not reflective of the
actual negotiated codecs. The nativeformats are now returned as
they reflect the actual negotiated codecs.
ASTERISK-26423 #close
Change-Id: I6ec88c6e3912f52c334f1a26983ccb8f267020dc
|
|
ARI and AMI allow for an explicit channel ID to be specified
when originating channels. Unfortunately, there is nothing in
place to prevent someone from using the same ID for multiple
channels. Further complicating things, adding ID validation to channel
allocation makes it impossible for ARI to discern why channel allocation
failed, resulting in a vague error code being returned.
The fix for this is to institute a new method for channel errors to be
discerned. The method mirrors errno, in that when an error occurs, the
caller can consult the channel errno value to determine what the error
was. This initial iteration of the feature only introduces "unknown" and
"channel ID exists" errors. However, it's possible to add more errors as
needed.
ARI uses this feature to determine why channel allocation failed and can
return a 409 error during origination to show that a channel with the
given ID already exists.
ASTERISK-26421
Change-Id: Ibba7ae68842dab6df0c2e9c45559208bc89d3d06
|
|
Since the json library does not make the check function public we
recreate/copy the function in our interface module.
ASTERISK-26466
Reported by: Richard Mudgett
Change-Id: I36d3d750b6f5f1a110bc69ea92b435ecdeeb2a99
|
|
al." into 13
|
|
|
|
|
|
Small fix. It is necessary to double-check
the index that we just removed because there
is a new element.
ASTERISK-26453 #close
Change-Id: Ib947fa94dc91dcd9341f357f1084782c64434eb7
|
|
Fixed a memory leak. It removes only the first element.
Added a useful feature in vector.h to remove all items
under the CMP through a callback function / macro.
ASTERISK-26453 #close
Change-Id: I84508353463456d2495678f125738e20052da950
|
|
Added tests for bzip2, tar, patch, sed and nm to configure.ac.
Set DOWNLOAD_TO_STDOUT to a working command line regardless of
whether the download program is wget, curl or fetch.
Added a 'configure.m4' file to the third-party directory which takes
care of calling any third-party project setup. Had to move some
pjproject_bundled stuff up in configure.ac so it was called before
the third-party configure macro.
The pjproject tarball is now downloaded to the externals_cache_dir if
it was specified on the ./configure command line
Removed regeneration of the pjproject aconfigure file. It was only
needed for an old patch that no longer applies.
Converted the tests for symbols to explicit tests since we know that
they're now available in the bundled version. Saves a little time
during configure.
ASTERISK-26416 #close
Reported-by: Corey Farrell
Change-Id: Id1d94251c0155f8dd41b7de7067f35cfbaafbb9b
|
|
* Compile __ast_assert_failed unconditionally.
* Use __ast_assert_failed to log messages from log_bad_ao2
* Remove calls to ast_assert(0) that happen after log_bad_ao2 was run.
Change-Id: I48f1af44b2718ad74a421ff75cb6397b924a9751
|
|
This reverts commit 40aa28131bc30b4516da2b20eb1a1e043920169c.
ASTERISK-26426 #close
Change-Id: I81e55c3c512f1dd6f49896f0c6b97a07d74fd8f5
|
|
Preparation
ASTERISK-26409
Change-Id: I9f20e7cce00c32464d9a180e81283d49d199d0a3
(cherry picked from commit 59f7662a93bf9c07204fb50e1020a0f5bfbbd5c9)
|
|
Add Ogg/Opus playback support.
This uses libopusfile in order to be able to read .opus files and play
them back.
Writing/recording support is not present at this time.
ASTERISK-26409
Change-Id: I8815d23345108d8ca7c0bd640f6a1ce6b4f56955
|
|
Users upgrading from asterisk 13.5 to a later version and who use
realtime with peers that have mailboxes were experiencing runaway
situations that manifested as a continuous stream of taskprocessor
congestion errors, memory leaks and an unresponsive chan_sip.
A related issue was that setting rtcachefriends=no NEVER worked in
asterisk 13 (since the move to stasis). In 13.5 and earlier, when a
peer tried to register, all of the stasis threads would block and
chan_sip would again become unresponsive. After 13.5, the runaway
would happen.
There were a number of causes...
* mwi_event_cb was (indirectly) calling build_peer even though calls to
mwi_event_cb are often caused by build_peer.
* In an effort to prevent chan_sip from being unloaded while messages
were still in flight, destroy_mailboxes was calling
stasis_unsubscribe_and_join but in some cases waited forever for the
final message.
* add_peer_mailboxes wasn't properly marking the existing mailboxes
on a peer as "keep" so build_peer would always delete them all.
* add_peer_mwi_subs was unsubscribing existing mailbox subscriptions
then just creating them again.
All of this was causing a flood of subscribes and unsubscribes on
multiple threads all for the same peer and mailbox.
Fixes...
* add_peer_mailboxes now marks mailboxes correctly and build_peer only
deletes the ones that really are no longer needed by the peer.
* add_peer_mwi_subs now only adds subscriptions marked as "new" instead
of unsubscribing and resubscribing everything. It also adds the peer
object's address to the mailbox instead of its name to the subscription
userdata so mwi_event_cb doesn't have to call build_peer.
With these changes, with rtcachefriends=yes (the most common setting),
there are no leaks, locks, loops or crashes at shutdown.
rtcachefriends=no still causes leaks but at least it doesn't lock, loop
or crash. Since making rtcachefriends=no work wasnt in scope for this
issue, further work will have to be deferred to a separate patch.
Side fixes...
* The ast_lock_track structure had a member named "thread" which gdb
doesn't like since it conflicts with it's "thread" command. That
member was renamed to "thread_id".
ASTERISK-25468 #close
Change-Id: I07519ef7f092629e1e844f855abd279d6475cdd0
|
|
sd_notify() is used to notify systemd of changes to the status of the
process. This allows the systemd daemon to know when the process
finished loading (and thus only start another program after Asterisk has
finished loading).
To use this, use a systemd unit with 'Type=notify' for Asterisk.
This commit also adds the function ast_sd_notify(), a wrapper around
sd_notify that does nothing if not built with systemd support.
Also adds support for libsystemd detection in the configure script.
Change-Id: Ied6a59dafd5ef331c5c7ae8f3ccd2dfc94be7811
(cherry picked from commit 07b95f7c65b7c083724f1af2b26f93cc22cad58c)
|
|
This implements the chan_sip legacy_useroption_parsing option but with a
better name.
* Made the caller-id number and redirecting number strings obtained from
incoming SIP URI user fields always truncated at the first semicolon.
People don't care about anything after the semicolon showing up on their
displays even though the RFC allows the semicolon.
ASTERISK-26316 #close
Reported by: Kevin Harwell
Change-Id: Ib42b0e940dd34d84c7b14bc2e90d1ba392624f62
|
|
|
