| Age | Commit message (Collapse) | Author |
|---|
|
ast_codec"
|
|
|
|
Adding format_name even to the end of ast_codec caused issued with
binary codec modules because the pointer would be garbage in asterisk
when they registered. So, the ast_codec structure was reverted and an
internal_ast_codec structure was created just for use in codec.c. A new
internal-only API was also added (__ast_codec_register_with_format) so
that codec_builtin could register codecs with the format_name in a
separate parameter rather than in the ast_codec structure.
ASTERISK-26144 #close
Reported-by: Alexei Gradinari
Change-Id: I6df1b08f6a6ae089db23adfe1ebc8636330265ba
|
|
Removed the obsolete macro AC_TYPE_SIGNAL because Asterisk does not use K&R C
but requires ANSI C anyway.
ASTERISK-26046
Change-Id: I914c014385e1862102d90fe7650621def78db02e
|
|
|
|
The patch removes updating all Endpoints' status on startup.
Instead, only non-qualified aors with static contact
and non-qualified non-expired contacts are retrieved from the realtime to
update the endpoint status to ONLINE.
The endpoint name was added to the contact object to simply find the endpoint
that created this contact.
The status of endpoints with qualified aors will be updated by 'qualify'
functions.
ASTERISK-26061 #close
Change-Id: Id324c1776fa55d3741e0c5457ecac0304cb1a0df
|
|
A non-existent constraint was being referenced in the upgrade script.
This patch corrects the problem by removing the reference.
In addition, the head of the alembic branch referred to a non-existent
revision. This has been fixed by referring to the proper revision.
This patch fixes another realtime problem as well. Our Alembic scripts
store booleans as yes or no values. However, Sorcery tries to insert
"true" or "false" instead. This patch introduces a new boolean type that
translates to "yes" or "no" instead.
ASTERISK-26128 #close
Change-Id: I51574736a881189de695a824883a18d66a52dcef
|
|
Occasionally under load we'll attempt to send a final NOTIFY on a
subscription that's already been terminated and a SEGV will occur
down in pjproject's evsub_destroy function. This is a result of a
race condition between all the paths that can generate a notify
and/or destroy the underlying pjproject evsub object:
* The client can send a SUBSCRIBE with Expires: 0.
* The client can send a SUBSCRIBE/refresh.
* The subscription timer can expire.
* An extension state can change.
* An MWI event can be generated.
* The pjproject transaction timer (timer_b) can expire.
Normally when our pubsub_on_evsub_state is called with a terminate,
we push a task to the serializer and return at which point the dialog
is unlocked. This is usually not a problem because the task runs
immediately and locks the dialog again. When the system is heavily
loaded though, there may be a delay between the unlock and relock
during which another event may occur such as the subscription timer
or timer_b expiring, an extension state change, etc. These may also
cause a terminate to be processed and if so, we could cause pjproject
to try to destroy the evsub structure twice. There's no way for us to
tell that the evsub was already destroyed and the evsub's group lock
can't tolerate this and SEGVs.
The remedy is twofold.
* A patch has been submitted to Teluu and added to the bundled
pjproject which adds add/decrement operations on evsub's group lock.
* In res_pjsip_pubsub:
* configure.ac and pjproject-bundled's configure.m4 were updated
to check for the new evsub group lock APIs.
* We now add a reference to the evsub group lock when we create
the subscription and remove the reference when we clean up the
subscription. This prevents evsub from being destroyed before
we're done with it.
* A state has been added to the subscription tree structure so
termination progress can be tracked through the asyncronous tasks.
* The pubsub_on_evsub_state callback has been split so it's not doing
double duty. It now only handles the final cleanup of the
subscription tree. pubsub_on_rx_refresh now handles both client
refreshes and client terminates. It was always being called for
both anyway.
* The serialized_on_server_timeout task was removed since
serialized_pubsub_on_rx_refresh was almost identical.
* Missing state checks and ao2_cleanups were added.
* Some debug levels were adjusted to make seeing only off-nominal
things at level 1 and nominal or progress things at level 2+.
ASTERISK-26099 #close
Reported-by: Ross Beer.
Change-Id: I779d11802cf672a51392e62a74a1216596075ba1
|
|
Announcer channels were not being destroyed because the
stasis_app_control structure that referenced them was not being
destroyed. The control structure was not being destroyed because it was
not being unlinked from its container. It was not being unlinked from
its container because the after bridge callback for the announcer
channel was not being run. The after bridge callback was not being run
because the after bridge datastore was not being removed from the
channel on destruction. The channel was not being destroyed because the
hangup that used to destroy the channel was now only reducing the
reference count to one. The reference count of the channel was only
being reduced to one because the stasis_app_control structure was
holding the final reference...
The control structure used to not keep a reference to the channel, so
that loop described above did not happen.
The solution is to manually remove the control structure from its
container when the playback on a bridge is complete.
ASTERISK-26083 #close
Reported by Joshua Colp
Change-Id: I0ddc0f64484ea0016245800b409b567dfe85cfb4
|
|
Stasis subscriptions and message routers create taskprocessors to process
the event messages. API calls are needed to be able to set the congestion
levels of these taskprocessors for selected subscriptions and message
routers.
* Updated CDR, CEL, and manager's stasis subscription congestion levels
based upon stress testing. Increased the congestion levels to reduce the
potential for bursty call setup/teardown activity from triggering the
taskprocessor overload alert. CDRs in particular need an extra high
congestion level because they can take awhile to process the stasis
messages.
ASTERISK-26088
Reported by: Richard Mudgett
Change-Id: Id0a716394b4eee746dd158acc63d703902450244
|
|
Sorcery creates taskprocessors for object types to process object observer
callbacks. An API call is needed to be able to set the congestion levels
of these taskprocessors for selected object types.
* Updated PJSIP's contact and contact_status sorcery object type observer
default congestion levels based upon stress testing. Increased the
congestion levels to reduce the potential for bursty register/unregister
and subscribe/unsubscribe activity from triggering the taskprocessor
overload alert.
ASTERISK-26088
Reported by: Richard Mudgett
Change-Id: I4542e83b556f0714009bfeff89505c801f1218c6
|
|
When taskprocessors get backed up, there is a good chance that we are
being overloaded and need to defer adding new work to the system.
* Implemented a high/low water alert mechanism for modules to check if the
system is being overloaded and take appropriate action. When a
taskprocessor is created it has default congestion levels set. A
taskprocessor can later have those congestion levels altered for specific
needs if stress testing shows that the taskprocessor is a symptom of
overloading or needs to handle bursty activity without triggering an
overload alert.
* Add CLI "core show taskprocessor" low/high water columns.
* Fixed __allocate_taskprocessor() to not use RAII_VAR(). RAII_VAR() was
never a good thing to use when creating a taskprocessor because of the
nature of how its references needed to be cleaned up on a partial
creation.
* Made res_pjsip's distributor check if the taskprocessor overload alert
is active before placing a message representing brand new work onto a
distributor serializer.
ASTERISK-26088
Reported by: Richard Mudgett
Change-Id: I182f1be603529cd665958661c4c05ff9901825fa
|
|
We must continue using the serializer that the original INVITE came in on
for the dialog. There may be retransmissions already enqueued in the
original serializer that can result in reentrancy and message sequencing
problems.
Outgoing call legs create the pjsip/outsess/<endpoint> serializers for
their dialogs.
ASTERISK-26088
Reported by: Richard Mudgett
Change-Id: I24d7948749c582b8045d5389ba3f6588508adbbc
|
|
Incoming messages that are not part of a dialog or a recognized response
to one of our requests need to be sent to a consistent serializer. Under
load we may be queueing retransmissions before we can process the original
message. We don't need to throw these messages onto random serializers
and cause reentrancy and message sequencing problems.
* Created a pool of pjsip/distributor serializers that get picked by
hashing the call-id and remote tag strings of the received messages.
* Made ast_sip_destroy_distributor() destroy items in the reverse order of
creation.
ASTERISK-26088
Reported by: Richard Mudgett
Change-Id: I2ce769389fc060d9f379977f559026fbcb632407
|
|
|
|
|
|
A crash can occur in res_hep_pjsip or res_hep_rtcp if res_hep has not
loaded and does not have a configuration file. Previously when this
occurred, checks were put in to see if the configuration was loaded
successfully. While this is a good idea - and has been added to the
offending function in res_hep - the reality is res_hep_pjsip and
res_hep_rtcp have no business running if res_hep isn't also running.
As such, this patch also adds a function to res_hep that returns whether
or not it successfully loaded. Oddly enough, ast_module_check returns
"everything is peachy" even if a module declined its load - so it cannot
be solely relied on. res_hep_pjsip and res_hep_rtcp now also check this
function to see if they should continue to load; if it fails, they
decline their load as well.
ASTERISK-26096 #close
Change-Id: I007e535fcc2e51c2ca48534f48c5fc2ac38935ea
|
|
|
|
If you create a local channel and don't specify an originator channel
to take capabilities from, we automatically add all audio formats to
the new channel's capabilities. When we try to make the channel
compatible with another, the "best format" functions pick the best
format available, which in this case will be slin192. While this is
great for preserving quality, it's the worst for performance and
overkill for the vast majority of applications.
In the absense of any other information, adding all formats is the
correct thing to do and it's not always possible to supply an
originator so a new parameter 'formats' has been added to the channel
create/originate functions. It's just a comma separated list of formats
to make availalble for the channel. Example: "ulaw,slin,slin16".
'formats' and 'originator' are mutually exclusive.
To facilitate determination of format names, the format name has been
added to "core show codecs".
ASTERISK-26070 #close
Change-Id: I091b23ecd41c1b4128d85028209772ee139f604b
|
|
POSIX defines poll.h, sys/poll.h should not be used at is c-library
internal header which may or may not exist. Notable in musl it
generates warning of being incorrect. And add explict include of
sys/cdefs.h where needed.
Change-Id: I142930df53fe7585a06b854b6faddc5301e024be
|
|
|
|
|
|
This adds a new parameter to the end of a multicast RTP dialing string.
This parameter defines the following options:
* i: Set the interface from which multicast RTP is sent
* l: Set whether multicast packets are looped back to the sender
* t: Set the TTL for multicast packets
* c: Set the codec to use for RTP
ASTERISK-26068 #close
Reported by Mark Michelson
Change-Id: I033b706b533f0aa635c342eb738e0bcefa07e219
|
|
ARI dial had been implemented using the Dial API. This made great sense
when dialing was 100% separate from bridging. However, if a channel were
to be added to a bridge during the dial attempt, there would be a
conflict between the dialing thread and the bridging thread. Each would
be attempting to read frames from the dialed channel and act on them.
The initial attempt to make the two play nice was to have the Dial API
suspend the channel in the bridge and stay in charge of the channel
until the dial was complete. The problem with this was that it was
riddled with potential race conditions. It also was not well-suited for
the case where the channel changed which bridge it was in during the
dial.
This new approach removes the use of the Dial API altogether. Instead,
the channel we are dialing is placed into an invisible ARI dialing
bridge. The bridge channel thread handles incoming frames from the
channel. If the channel is added to a real bridge, it is departed from
the invisible bridge and then added to the real bridge. Similarly, if
the channel is removed from the real bridge, it is automatically added
back to the invisible bridge if the dial attempt is still active.
This approach keeps the threading simple by always having the channel
being handled by bridge channel threads.
ASTERISK-25925
Change-Id: I7750359ddf45fcd45eaec749c5b3822de4a8ddbb
|
|
As res_pjsip_nat rewrites contact's address, only the last Via header
can contain the source address of registered endpoint.
Also Call-Id header may contain the source address of registered
endpoint.
Added "via_addr", "via_port", "call_id" to contact.
Added new fields ViaAddress, CallID to AMI event ContactStatus.
ASTERISK-26011
Change-Id: I36bcc0bf422b3e0623680152d80486aeafe4c576
|
|
|
|
recording"
|
|
Invisible bridges function the same as normal bridges, but they have the
following restrictions:
* They never show up in CLI, AMI, or ARI queries.
* They do not have Stasis messages published about them.
Invisible bridges' main use is for when use of the bridging system is
desired, but the bridge should not be known to users of the Asterisk
system.
ASTERISK-25925
Change-Id: I804a209d3181d7c54e3d61a60eb462e7ce0e3670
|
|
|
|
The characters 0x80-0xFF were trimmed as well as 0x00-0x20 because of
a signed comparison.
ASTERISK-25669 #close
Reported by: Jesper
patches:
strings.curl.trim.patch submitted by Jesper (License 5518)
Change-Id: Ia51e169f24e3252a7ebbaab3728630138ec6f60a
|
|
ASTERISK-26029
Change-Id: I2db14d102a48d3224010e6d1c69e856373cc1260
|
|
This patch adds a new feature to ARI that allows a client to download
the media associated with a stored recording. The new route is
/recordings/stored/{name}/file, and transmits the underlying binary file
using Asterisk's HTTP server's underlying file transfer facilities.
Because this REST route returns non-JSON, a few small enhancements had
to be made to the Python Swagger generation code, as well as the
mustache templates that generate the ARI bindings.
ASTERISK-26042 #close
Change-Id: I49ec5c4afdec30bb665d9c977ab423b5387e0181
|
|
|
|
|
|
|
|
This change uses the newly added multi-user support for
outbound publish to publish to the specific user that an
extension state change is for.
This also extends the res_pjsip_outbound_publish support
to include the user specific From and To URI information in
the outbound publishing of extension state. Since the URI
is used when constructing the body it is important to ensure
that the correct local and remote URIs are used.
Finally the max string growths for the dialog-info+xml
body generator has been increased as through testing it has
proven to be too conservative.
ASTERISK-25965
Change-Id: I668fdf697b1e171d4c7e6f282b2e1590f8356ca1
|
|
Added a new multi_user option that when specified allows a particular
configuration to be used for multiple users. It does this by replacing
the user portion of the server uri with a dynamically created one.
Two new API calls have been added in order to make use of the new
functionality:
ast_sip_publish_user_send - Sends an outgoing publish message based on the
given user. If state for the user already exists it uses that, otherwise
it dynamically creates new outbound publishing state for the user at that
time.
ast_sip_publish_user_remove - Removes all outbound publish state objects
associated with the user. This essentially stops outbound publishing for
the user.
ASTERISK-25965 #close
Change-Id: Ib88dde024cc83c916424645d4f5bb84a0fa936cc
|
|
Many ARI applications will want to play multiple media files in a row to
a resource. The most common use case is when building long-ish IVR prompts
made up of multiple, smaller sound files. Today, that requires building a
small state machine, listening for each PlaybackFinished event, and triggering
the next sound file to play. While not especially challenging, it is tedious
work. Since requiring developers to write tedious code to do normal activities
stinks, this patch adds the ability to play back a list of media files to a
resource.
Each of the 'play' operations on supported resources (channels and bridges)
now accepts a comma delineated list of media URIs to play. A single Playback
resource is created as a handle to the entire list. The operation of playing
a list is identical to playing a single media URI, save that a new event,
PlaybackContinuing, is raised instead of a PlaybackFinished for each non-final
media URI. When the entire list is finished being played, a PlaybackFinished
event is raised.
In order to help inform applications where they are in the list playback, the
Playback resource now includes a new, optional attribute, 'next_media_uri',
that contains the next URI in the list to be played.
It's important to note the following:
- If an offset is provided to the 'play' operations, it only applies to the
first media URI, as it would be weird to skip n seconds forward in every
media resource.
- Operations that control the position of the media only affect the current
media being played. For example, once a media resource in the list
completes, a 'reverse' operation on a subsequent media resource will not
start a previously completed media resource at the appropiate offset.
- This patch does not add any new operations to control the list. Hopefully,
user feedback and/or future patches would add that if people want it.
ASTERISK-26022 #close
Change-Id: Ie1ea5356573447b8f51f2e7964915ea01792f16f
|
|
When 2d7a4a3357 was merged, it missed the fact that Verbose log messages
are formatted and handled by 'verbosers'. Verbosers are registered
functions that handle verbose messages only; they exist as a separate
class of callbacks. This was done to handle the 'magic' that must be
inserted into Verbose messages sent to remote consoles, so that the
consoles can format the messages correctly, i.e., the leading
tabs/characters.
In reality, verbosers are a weird appendage: they're a separate class of
formatters/message handlers outside of what handles all other log
messages in Asterisk. After some code inspection, it became clear that
simply passing a Verbose message along with its 'sublevel' importance
through the normal logging mechanisms removes the need for verbosers
altogether.
This patch removes the verbosers, and makes the default log formatter
aware that, if the log channel is a console log, it should simply insert
the 'verbose magic' into the log messages itself. This allows the
console handlers to interpret and format the verbose message
themselves.
This simplifies the code quite a lot, and should improve the performance
of printing verbose messages by a reasonable factor:
(1) It removes a number of memory allocations that were done on each
verobse message
(2) It removes the need to strip the verbose magic out of the verbose
log messages before passing them to non-console log channels
(3) It now performs fewer iterations over lists when handling verbose
messages
Since verbose messages are now handled like other log messages (for the
most part), the JSON formatting of the messages works as well.
ASTERISK-25425
Change-Id: I21bf23f0a1e489b5102f8a035fe8871552ce4f96
|
|
At one point in time, it seemed like a good idea to use the Asterisk
channel name as the HEP correlation UUID. In particular, it felt like
this would be a useful identifier to tie PJSIP messages and RTCP
messages together, along with whatever other data we may eventually send
to Homer. This also had the benefit of keeping the correlation UUID
channel technology agnostic.
In practice, it isn't as useful as hoped, for two reasons:
1) The first INVITE request received doesn't have a channel. As a
result, there is always an 'odd message out', leading it to be
potentially uncorrelated in Homer.
2) Other systems sending capture packets (Kamailio) use the SIP Call-ID.
This causes RTCP information to be uncorrelated to the SIP message
traffic seen by those capture nodes.
In order to support both (in case someone is trying to use res_hep_rtcp
with a non-PJSIP channel), this patch adds a new option, uuid_type, with
two valid values - 'call-id' and 'channel'. The uuid_type option is used
by a module to determine the preferred UUID type. When available, that
source of a correlation UUID is used; when not, the more readily available
source is used.
For res_hep_pjsip:
- uuid_type = call-id: the module uses the SIP Call-ID header value
- uuid_type = channel: the module uses the channel name if available,
falling back to SIP Call-ID if not
For res_hep_rtcp:
- uuid_type = call-id: the module uses the SIP Call-ID header if the
channel type is PJSIP and we have a channel,
falling back to the Stasis event provided
channel name if not
- uuid_type = channel: the module uses the channel name
ASTERISK-25352 #close
Change-Id: Ide67e59a52d9c806e3cc0a797ea1a4b88a00122c
|
|
With the old SIP module we can use IP access controls per peer.
PJSIP module missing this feature.
This patch added next configuration Endpoint options:
"acl" - list of IP ACL section names in acl.conf
"deny" - List of IP addresses to deny access from
"permit" - List of IP addresses to permit access from
"contact_acl" - List of Contact ACL section names in acl.conf
"contact_deny" - List of Contact header addresses to deny
"contact_permit" - List of Contact header addresses to permit
This patch also better logging failed request:
add custom message instead of "No matching endpoint found"
add SIP method to logging
ASTERISK-25900
Change-Id: I456dea3909d929d413864fb347d28578415ebf02
|
|
|
|
This migrates res_pjsip_pubsub over to using the newly
introduce common datastores management API instead of using
its own implementations for both subscriptions and
publications.
As well the extension state data now provides a generic
datastores container instead of a subscription. This allows
the dialog-info+xml body generator to work for both
subscriptions and publications.
ASTERISK-25999 #close
Change-Id: I773f9e4f35092da0f653566736a8647e8cfebef1
|
|
This change introduces a common container based datastores
management API. This has been done in a few places across
the tree but this consolidates all of the logic into one
place in a generic fashion.
ASTERISK-25999
Change-Id: I72eb15941dcdbc2a37bb00a33ce00f8755bd336a
|
|
The pjsua and pjsystest apps are now built only if TEST_FRAMEWORK is set.
The python bindings are now built only if TEST_FRAMEWORK is set and a
python development package is installed.
libresample was also disabled.
ASTERISK-25993 #close
Reported-by: Joshua Colp
Change-Id: If4e91c503a02f113d5b71bc8b972081fa3ff6f03
|
|
With the old SIP module AMI sends PeerStatus event on every
successfully REGISTER requests, ie, on start registration,
update registration and stop registration.
With PJSIP AMI sends ContactStatus only when status is changed.
Regarding registration:
on start registration - Created
on stop registration - Removed
but on update registration nothing
This patch added contact.updated event.
ASTERISK-25904
Change-Id: I8fad8aae9305481469c38d2146e1ba3a56d3108f
|
|
|
|
If the Asterisk system name is set in asterisk.conf, it will be stored
into the "reg_server" field in the ps_contacts table to facilitate
multi-server setups.
ASTERISK-25931
Change-Id: Ia8f6bd2267809c78753b52bcf21835b9b59f4cb8
|
|
Create PUBLISH messages to update a third party when an extension state
changes because of either a device or presence state change.
A configuration example:
[exten-state-publisher]
type=outbound-publish
server_uri=sip:instance1@172.16.10.2
event=presence
; Optional regex for context filtering, if specified only extension state
; for contexts matching the regex will cause a PUBLISH to be sent.
@context=^users
; Optional regex for extension filtering, if specified only extension
; state for extensions matching the regex will cause a PUBLISH to be sent.
@exten=^[0-9]*
; Required body type for the PUBLISH message.
;
; Supported values are:
; application/pidf+xml
; application/xpidf+xml
; application/cpim-pidf+xml
; application/dialog-info+xml (Planned support but not yet)
@body=application/pidf+xml
The '@' extended variables are used because the implementation can't
extend the outbound publish type as it is provided by the outbound publish
module. That means you either have to use extended variables, or
implement some sort of custom extended variable thing in the outbound
publish module. Another option would be to refactor that stuff to have an
option which specifies the use of an alternate implementation's
configuration and then have that passed to the implementation. JColp
opted for the extended variables method originally.
ASTERISK-25972 #close
Change-Id: Ic0dab4022f5cf59302129483ed38398764ee3cca
|
|
|
